Apex Toys AM08S 2.4G Transmitting Box User Manual 2ADSOAM08S manual

Apex Toys (Shenzhen)Co., Ltd. 2.4G Transmitting Box 2ADSOAM08S manual

Users Manual

                (Apex Toys)  2Manaual  The important parameters: 1,2.4G Remote control distance is more than 30 meters 2,Pull the transmitter out and enter the sleep time: 10 seconds. 3,Usage duration: more than 10 hours 4,Static Battery when it sleep: below 0.1mA FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna.     -- Increase the separation between the equipment and receiver.       -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.   -- Consult the dealer or an experienced radio/TV technician for help.  This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
                (Apex Toys)  3 Block diagram            Product Features:   This product can be connected with the mobile phone to control the toy plane Product main components:  80MAH li-polymer battery  Master MCU, with a sleep function  3.5 mm plug Audio signal 2.4G Transmitting module  Power Light  Charge system
                (Apex Toys)  4    1. The upper body of transmitter 2. The  red  light 3. The bottom body of transmitter 4.  Charger hole 5.  3.5mm Audio plug 6. PCBA 8.  2.4G transmitting module 7.  Master MCU
                (Apex Toys)  5   2.4G Audio transmitter function light description: NO. Name   Material  Color  Requirements 1   The upper body of transmitter  30%PC+ABS    Black/White  Injection& Sink printing 2 Power light     Red  Soft and Not dazzling 3  The bottom body of transmitter  30%PC+ABS  Black/White  Injection& Sink printing 4 Charger hole   Black  DC Seat 5  3.5mm audio plug    Nickel-plated  Standard mobile phones with 3.5mm four plug section 6 PCBA FR-4  White word & Green oil  HAL 7  Master MCU   Black   8  2.4G transmitting module   White word & Green oil  HAL 9 Battery 80MAH li-polymer battery   10 Antenna Copper  White   11  Transparent hold LED  ABS  Transparent   9. Battery 11. Transparent hold LED 10. Antenna
                (Apex Toys)  6  The internal assembly structure: Function Description Function light  Color  Functioning Pattern  The status of the lamp Successful connection on the phone   Flashing slowly, 1/second 2.4G connected successfully  Often Bright state Sleep Light off Indicator Light  Red No connected  Light off The internal assembly structure
                (Apex Toys)  7    The upper body of transmitter   The bottom body of transmitter
                (Apex Toys)  8 2.4G Audio transmitter matching    process:          Switch on the Helicopter   The LED lamp is flashing. To insert the 2.4 audio transmitter into mobile phone Enter the corresponding control software Push the ON/OFF on the software to the ON file, Then the 2.4G audio transmitter will paired with Aircraft automatically. The pairing is successful, the LED light on the 2.4G transmitter will light up, and the LED light on the plan also will light up. Operation in the user interface, Then you can control the toys.

Navigation menu