CRE Electronic Technology X3001 Projector User Manual

CRE Electronic Technology Company Limited Projector Users Manual

User Manual

M a n u a lCRE Multimedia ProjectorCHUANGRONGAdd: A5/F, Block A3, Jinrong Tongxin High-tech Park, Wanglei Road, Yuelu District, Changsha City, Hunan Province, ChinaWeb: www.creprojector.comTel: +86 731-83751062 CRE Electronic Technology Co., limited, Hunan, China
DirectoryChapter 2 Equipment connection Settings ---- -- -- -- - 03Chapter 3 Android Desk -- -- -- -- -- --- 06 Chapter 4 External channel (OSD) Setting ---- -- -- -- - 12Chapter 5 Maintenance - -- -- -- -- -- --- 13Chapter 1 Overview ----------------- 01Chapter 1, OverviewAccessoriesProjector--- --- --- --- - 1pc --- Instruction Manual -------------- 1pcPower Plug 1pc --- --- -- --- --- Remote Control ----------- ------ 1pc 4 Bolts for Fixing 4pcsHDMI Cable--- --- --- --- --1pc --- --- -- --- --- - - ●●●●●●OverviewTop/Right Side Overview Focus ( Adjust definition)Bottom Overview01product specific a tion Zoom (Adjust screen size) Left and Right Heat Vent(pls do not cover it) Projection Image Height Adjustment Heat Emission Hole( Don’t cover) Installation Diagram(Follow it to install ) Tilt Adjustment Knob(Rotate it to adjust the left and right height of the projection image)
0302TF CardAudio-out HDMI-2HDMI-1Power Voice -Importance:1. Make sure no obstacle between remote control and projector. If there is obstacle between them, remote control signal may be reflected back by the particular surface ,which will affect operation.2. Buttons and keys on projector have the same function with buttons of remote control.Our manual introduces functions based on remote control.Warning: To be safe, cut power between projector and relative equipment before connect cable.projector When you connect projector with different equipment, you should choose corresponding input channel on main interface. Otherwise, there will have no image to be projected out.1.Choose the connection input channel.by direction key2.Press Ok to confirm3.Press Return key to last stepBack OverviewAudio-in Rj45Anti-theft Lock Video InputVGA ComputerInternet connectionAdapter BatteryKey Overview3D Multifunction Key IR SensorDirection & EnterMENU Return Key Indicator Light Remote Control Overview3D Multifunction Key EnterMenuVoice + Return DirectionMain Interface On/OffChapter 2 Equipment connection SettingsSelect the Signal for the ProjectorProjector Connection SettingConnect with HDMI deviceUse HDMI cable to connect projector with HDMI device. Connect with Personal ComputerUse VGA to connect projector with personal computer. cable Note：PC must have a VGA output port, then you can use VGA cable to connect projector.product specific a tionproduct specific a tionUSB3.0 USB2.0
0504Insert USB flash driver T F card/Insert the storage device into the corresponding port, then the USB flash driver/TF card will be connected to the projector..Connect the VideoConnect the video equipment to the projector by video cable.Connect the AudioInsert earphone or 3.5mm audio cable to the projector audio output ,insert the audio cable from DVD , Set Top Box or other signal devices to the audio input .Then there will be audio out to the earphone or external mini speaker.Turn on/off the Projector1.Connect one end of the power cord to the wall power supply socket (A), and the other end connected to the three hole socket (B)of the projector.Adjust ImageUsing image focusing control button (Located on the side of the projector)Adjust the projected image sharpness(A).Using image zoom control button (Located on the side of the projector)Adjust the projected image size (B).Set the Remote ControlThe remote control is equipped with a 3V lithium battery(CR2032). Battery was pre-installed in the remote control.If shipping way does not support battery, you need to buy it.Before using the remote control, take out the plasticsheet from the battery compartment. Change Remote Control battery1.Toward the direction of arrow ,move and pull out of the cover.2.Remove the old battery, install new battery(the positive upward).3.Fit on battery’s cover.Note：1. Can only use 3V lithium battery (Cr20322. In accordance with the relevant local regulations dispose the waste batteries.3. The battery should be taken out if you do not use the equipment for long time.) The remote control controls the projector through the infrared transmission . Remote controlling the radius of about 7 m (23 ft) and above or below projector’s range of 15 degrees ,it can work normally (but the remote control can not be perpendicular to the bottom of the projector ).If the projector does not response to the remote control instruction, please move it near to the projector.product specific a tionproduct specific a tion2.Press remote control button or press button“ POWER” to turn on /off the projector
Chapter 3,Android DeskOverviewHDMI VGA CVBS – An external device fast connectionOffice – Some commonly used office document browserMovies – Some commonly used network playerApplication – All applications after installationSetting – Projector and system settingsFile Browser – Browse the mobile device resourceVideo,Music,Picture – Play the corresponding file in the mobile storage deviceClick the left corner at the bottom of the screenreturn homepage backstage connection statusDocument browser can open the following types of documents:MS office word ver97/2000XP/2003/2007/2010MS office Excel ver97/2000XP/2003/2007/2010MS office PPT ver97/2000XP/2003/2007/2010Adobe PDF 1.2/1.3/1.4/1.5/1.6/1.7TXT text Epub CHM HTMLImage files (bmp gif png jpeg)1.Click the button menu” at the upper left corner2. Click the button of ”open” 3. Select file storage device4. Select a file5. Open the file and browse”0706Screen Toolsvolume controlhideturn off multi-function key, you can set the 3D format,image,sound and light working modesOffice document browsingsupported formatsView the documentTo open a document file in a browser,please follow these steps:Settingsproduct specific a tionproduct specific a tion
08Setting the location of app installationSystem confirmation/ SD card / internal storageApp settingsApp managementStart up / unload / clear dataNetwork settingsWireless network settings Wired network settingsOpen the wired connection and selectauto IP or connect to IPv6 protocolSelect the network you want to connect,enter the password and click save,it will connect the network automatically.Language settingsLanguage settings Modify system languageModify the default input method Modify the input methods of keyboard Audio settingsSwitch Set the sound output on / offHigh voice Audio treble setting 0-100Low voice Audio bass setting 0-100Balance Set the left and right speaker volume balance 0-100Spdif Set audio interface signal output type09product specific a tionproduct specific a tion
Projector settingsBrightness Saving mode / highlight mode / office modeProjection Front projection / rear projection / upside down front projection / upside down rear projection Keystone correction Keystone correction manual correction ± 100Temperature 0°-70°System SettingsDesktop settings Modify the desktop background pictureDate time setting Modify the system timeAbout Display system informationPlaying mobile stored devices When you want to play a file in a mobile device,please select the correct type of window and enter.Resource manager Browser or play all types of filesMusic Only play the supported formats of music fileAlbum Only play the supported formats of picturesVideo Only play the supported formats of videos10 11Support following music file formats: MP3, WMA, WAV, OGG, FLAC, AAC, LC-AAC, APESupport following image file formats: JPG/JPEG, BMP, PNG,TIFF, GIFSupport following video file formats: RM/RMVB, AVI, TS, M2TS, MTS, MKV, MOV, FLV, DVD-ISO, BD-ISO, VOB, MPG, DAT, ASF,TP, TRP, WMV, IFO, SWF, 3GP, EVO, DIVX, MP4, OGMMulti-screen interactionAndroid Series ISO SeriesChoose the corresponding application icon to enter, according to the following ways to connect.Common android mobile phone wireless screen mirroring setup steps：Samsung Settings - > Settings - > more AllsharecastHTC Settings - > media outputXiaomi Setting - >more wireless connection - > wireless displayHuawei Settings - > display - > wireless displayLenovo Settings - > display - > wireless displayApple's IOS system setup stepsAirplay - > Search equipment - > Connection - > Click on the mirror image - > Click finishNote：Using equipment and projection must work in the same network conditions.Use the wireless screen mirroring function, the mobile phone devices should support with screen function, and setup the devices in correct way .product specific a tionproduct specific a tion
▲▲Item1312Chapter 4 External channel (OSD) SettingOSD menu controlThe projector external channel has screen display (OSD)setup menucan be used to adjust and change the settings.Four submenu in OSD menu :Picture- Adjust the image quality in this menu.Sounds Adjust sound effect in this menu.- Setting Adjust menu display time in this menu.- Time Setting automatic switch time.- If you want to to adjust the Settings menu, please perform the following steps:1. Press key to enter the OSD menu and then press choose the menu need to setting.2. Press ▲ or ▼ button，choose the item needto adjust and then press OK to entry.3. Press or button set parameters.4. Press to save setting. InstructionsPicture modeColor TemperatureZoom ModeImage noise reductionMPEG noise reductionPC iamge adjustSetting picture display mode,adjust picture effect. (User,Bright, Standard Soft )Adjust the image display different color temperature.(standard warm cold)Adjust the image display aspect ratio. (Automatic point-to-point 16:9 4:3)Setting reduce noise level (Low Middle High Automatic Off)Setting reduce noise level (Low Middle High Off)Setting reduce noise level (Low Middle High Off)Chapter 5, MaintenanceCleaning the ProjectorCleaning the projector to remove dust and grime will help running normally.Warning:1 Before cleaning, turn off the projector and unplug the power cord. Otherwise,it may result in injury or damage to the system.2. When cleaning ,you should only use a damp cloth . Do not allow water to enterthe ventilation of the projector.3. If a little water enter the interior of the projector when cleaning, please don’t connect the projector to power ,the projector should be placed in a well ventilated area for several hours before using.. Cleaning the LensCleaning fluid of optical lens can be purchased from most camera stores and other retail shops. To clean the projector lens, perform the following steps:Note：1. Do not use abrasive cleaners or solutions.2. To prevent discoloration or fading, do not let the cleaning liquid contact projectorcabinet.Note：Some parameters need to adjust it in user mode.Because of the different signal sources, OSD items could be settled will be different . For example, when the projector is connected to PC via VGA , user can alter the " "horizontal position/vertical position" of "picture> PC image adjust" menu. If connected to other signal source , this setting could not be changed and display by gray color.Simple TroubleshootingThe operation of the machine is very simple , generally in use will not encounter any problems . Sometimes on the operation and connection of peripheral equipment of the machine will caused by some fault illusion, please refer to the following for troubleshooting. If malfunction cannot be solved in the end, please contact the company's after-sales service.After-sales service no：+86 731-83751062product specific a tionproduct specific a tion▲
1514Problem of no ImageUse another electrical device to confirm the power socket is normal.Ensure the projector is turned on.Make sure all connections are secure.Make sure selected the correct signal input source.Make sure the connected device is turned on.Ensure a connected PC is not in suspend or sleep mode.Make sure the laptop is configured with external display correctly.Problem of Remote Control1. Point the remote control at the remote sensor of the projector.2. Make sure there are no obstructions between the remote control and the sensor.3. Turn off the fluorescent lights in the room.4. Check the battery polarity.5. Replace the battery.6. Turn off other equipment infrared enabled in the near region.7. Send remote control for repair.Problem: The projector does not respond to remote control commands.FAQ1. Can the projector be used together with PC, notebook or netbook?Yes. Use a VGA cable or HDMI cable that comes. If there is a correspondingHDMI or VGA port on the PC, laptop or netbook, the projector can connect to these devices. To play the audio, you need a stereo audio cable to connect the projector’s audio jack.Yes. The projector can display content from the Xbox or PS3 console. Just usethe HDMI cable to connect the game console with the projector.2. Can the projector be connected to a game console, such as Microsoft Xbox or Sony PS3?®®3. Can the projector project the content from TV?TV can generate image on its own screen. If you want to watch TV content,then need to connect a cable box, digital set-top box or satellite receiver. For example, if you use a cable box, you can connect it to the projector via the video cable or HDMI cable.4 .How to display images from a digital camera or USB flash driver?By connecting the following devices to the projector, you can display the corresponding image or other content:USB flash driver hard disk card reader, , Digital cameraSmart phoneMedia storage browserAfter connecting the devices, you can use the projector media channel display images.5. What kind of cables will be needed to connect video equipment to the projector?If the video device configured the appropriate port, you can use the audio/video cable or HDMI cable to connect it to the projector. If you want to play audio, RCA cable can also be connected to the projector.Distance and Screen SizeDisclaimer:Our company reserve the right to make changes to the contents of this instruction manualwithout any advance notice.Continuous upgrading of the software may bring some differences to the OSD operation menu and the picture of this instruction manual, but does not affect the normal operation of the functional operation described in this instruction manual. We are sorry if this brings inconvenience to you, please kindly understand.DistanceKeystone AngleImage Heightproduct specific a tionproduct specific a tionImage Size(Inch)50607080100120150Projection DistanceMax/Min (m)Projection Area(㎡)1.41--1.55 1.077*0.6731.70--1.87 1.292*0.8071.99--2.19 1.507*0.9422.28--2.50 1.723*1.0772.86--3.15 2.153*1.3463.43--3.78 2.584*1.6154.30--4.74 3.230*2.0195.75--6.33 4.307*2.692200
§ 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. *RF warning for Mobile device: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Navigation menu