Connected AMV01 LTE Cat-M GPS Tracker User Manual
Connected Holdings LLC LTE Cat-M GPS Tracker Users Manual
Users Manual
AR-4MA AR-4MA, not your standard connected car device. AR-4MA was designed to protect a dealer’s inventory from theft and misuse, as well as improve the efficiency of floor plan audits, increase fixed operations profitability, and enhance the sales process. Utilizing GPS technology in a new car franchise dealership requires unique, customization. The connected car system was designed from the bottom up to help franchise dealerships achieve their goals. AR-4MA is an evolutionary second-generation connected car hardware that enables dealers to locate inventory, manage loaner and demo inventory, prevent loss due to theft, reduce costs, increase staff efficiency and increase CSI. HIGHLIGHTS • Future-proofed 4G LTE technology • Expanded coverage throughout the U.S. and Canada for stronger vehicle connections and more accurate data • Lower power consumption AR-4MA SPECIFICATIONS CELLULAR 4G LTE Integrated Hyper Sensitive GPS and Cellular Antenna GPS FUNCTIONALITY Processor: 56 Channel Width: 1 1/2 Inches Depth: 11/16 inches Location Accuracy: up to 2.5 feet POWER SOURCE Operating Voltage: 6V – 28V Length: 3 1/2 inches POWER CONSUMPTION Normal Mode: 7-25 mA FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. RF Exposure Warning Statements: The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons during the normal operations. IC STATEMENT This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. In order to avoid the possibility of exceeding the IC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation. Afin d’éviter la possibilité de dépasser les limites d’exposition aux fréquences radio de la IC CNR102, la proximité humaine à l’antenne ne doit pas être inférieure à 20 cm (8 pouces) pendant le fonctionnement normal. Standby Mode: 2.5 - 5.5 mA Lowest power consumption available, ensuring minimal impact on vehicle batteries - (Uses approx. 1/1000th power of a smart phone.) ENVIRONMENTAL Operating Temperature: -22 degrees F to +167 degrees F Dust Resistant Designed to withstand harsh environments PHYSICAL SPECIFICATIONS Dimensions: 3 1/2” x 1 1/2” x 11/16” CERTIFICATIONS Fully Certified and Industry Compliant: FCC, PTCRB, RoHS2
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Language : en-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30 Create Date : 2018:07:10 13:57:51-07:00 Metadata Date : 2018:07:10 16:10:59-07:00 Modify Date : 2018:07:10 16:10:59-07:00 Creator Tool : Adobe InDesign CC 13.1 (Macintosh) Instance ID : uuid:1cef645b-530b-ec44-b3bf-2bb01dd39ec4 Original Document ID : xmp.did:81af7cc0-529b-4530-8748-f3377eeaeff9 Document ID : xmp.id:0fdfd702-1fa1-4e97-910e-031732069b4d Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:06cb4a26-b6e8-4dd8-be6f-c8e3257d0507 Derived From Document ID : xmp.did:3e74579a-d4fc-4468-ac51-b2fab7176ad8 Derived From Original Document ID: xmp.did:81af7cc0-529b-4530-8748-f3377eeaeff9 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 13.1 (Macintosh) History Changed : / History When : 2018:07:10 13:57:51-07:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Slug Family : Minion Pro Slug Version : 2.108 Slug Outline File Size : 0 Slug Kerning Checksum : 0 Slug Foundry : Adobe Systems Slug Font Kind : OpenType - PS Slug Checksum : 4058168798 Slug Post Script Name : MinionPro-Regular Slug Font Sense 12 Checksum : 4058168798 Page Count : 2 Creator : Adobe InDesign CC 13.1 (Macintosh)EXIF Metadata provided by EXIF.tools