Plantronics WO2 Wireless Communications System Base Unit with Bluetooth User Manual

Plantronics Inc Wireless Communications System Base Unit with Bluetooth Users Manual

Users Manual

Savi® W740 Wireless Headset System Quick Start GuideGuide de démarrage rapideGuía de inicio rápido Guia de Início Rápido1Savi WH500 Headset1 Volume Button   (Press in to mute/unmute)2 Call Control Button3 Indicator Light 4 Microphone5 Headband6 Battery7 Eartips8 Earloops9 Charge Cradle89764235Savi WO2 Base1 PC Talk Button and Indicator Light 2 Mobile Phone Talk Button and Indicator Light 3 Desk Phone Talk Button and Indicator Light4 Desk Phone Speaking Volume5 Configuration Switch 6 Desk Phone Listening Volume 7 Bluetooth Pairing Button and Indicator Light8 DECT Subscription Button and Indicator Light9 Charging Indicator Light 10 Power Jack11 Handset Lifter Jack 12 Telephone Interface Cable Jack 13 USB Port Base Power  SupplyTelephone  Interface Cable87564910 1112 13123USB CableCD includes: • Animated Setup Guide• Plantronics Software • Complete User Guide
3-13-25-14-17-6 8-4 8-5 9-111-1 11-26-1WelcomeCongratulations on purchasing your new Plantronics product. This Quick Start Guide contains instructions for setting up the Savi W740 (WO2™ Base + WH500™ Headset) Wireless Headset System.Please refer to the separate safety instructions for important product safety information prior to installation or use of the product.Set Up, Complete User Guide and SoftwareWe highly recommend that you refer to the included CD. The CD contains animated set up instructions; the complete user guide that provides full details on how to use your system; and the Plantronics software. The software enables you to:•  Remotely answer incoming softphone calls•  Customize your headset and Savi base settings to your personal preferences•  Automatically manage your PC multimedia so you never miss a call•  Quickly access links to product support and software/rmware upgrade informationYou can also download the software at plantronics.com/software and the user guide at  plantronics.com/documentation. System RequirementsThe minimum system requirements for Savi W740 are as follows:•  Supported Operating Systems: Windows XP®, Windows Vista®, Windows® 7 •  Processor: 400 MHz Pentium® processor or equivalent (Minimum); 1 GHz Pentium processor or equivalent (Recommended) •  RAM: 96 MB (Minimum); 256 MB (Recommended) •  Hard Disk: 280 MB (Minimum); 500 MB (Recommended) •  Display: 800 x 600, 256 colors (Minimum); 1024 x 768 high color, 32-bit (Recommended) •  Internet Explorer® V6 or better must be on the user’s system (Required)   Easy Set Up1   Locate CD and insert into your PC.2  Select your headset and lifter (if applicable). 3  Launch animated setup guide.7-2 7-77-2 8-67-2 8-72-12-22-31
1 Attaching Charge Cradle to Base1-1 Connect the headset charge cradle to the base. Push firmly on the cradle until the    cradle snaps into place.2 Connecting Base to Desk Phone2-1   Connect the telephone interface cable to the telephone interface cable jack on the    base.2-2   After disconnecting the handset coil cord from the desk phone, connect the      telephone interface cable to the now open handset port on the desk phone.2-3  Connect the handset coil cord to the telephone interface cable junction box.3 Connecting Power Supply to Base3-1   Connect the base power supply into the power jack on the base. 3-2   Connect the power supply to outlet. 4 Installing Battery to Headset4-1   Position the battery as shown on headset and slide into position until the battery    snaps into place.  NOTE This product has a replaceable battery. Use only the battery type supplied by Plantronics.5 Choosing Wearing Style5-1  If you prefer the over-the-ear style, attach the earloop first and then the eartip to    the headset.   NOTE Ensure the large end of the eartip faces down towards the microphone.5-2   If you prefer the over-the-head style, attach the headband to the headset. 6 Docking and Charging Headset6-1  Gently push the headset into the charge cradle.    The charging indicator light on the base will flash green to    indicate that the headset battery is charging.6-2  Charge for at least 20 minutes prior to the first use.     A full charge takes 3 hours.7 Checking Configuration7-1 Set volume on desk phone to mid-range.7-2  On the base, ensure the configuration switch is set to “A” and the desk phone      speaking volume and desk phone listening volume are both set to 3.  NOTE For most phones, these factory default settings will sound the best.7-3 While wearing your headset, press the call control button on headset.7-4 Remove the handset from desk phone cradle.7-5 Listen for a dial tone.  If the dial tone sounds clear, press the call control button on    headset and continue with Step 8 Making a Test Call with Desk Phone.7-6 If the dial tone is too loud or too soft, adjust the headset volume level.7-7 If the dial tone still does not sound clear, adjust the configuration switch until the    dial tone sounds the best.  NOTE Multiple settings might work with your phone; however, only one is the optimal position.7-8 Press the call control button on the headset and return the handset to the cradle to    complete configuration.8 Making a Test Call with Desk Phone8-1   While wearing your headset, press the call control button on headset.8-2 Remove the handset from desk phone cradle.8-3 Dial the number using your desk phone. 8-4  You can fine tune the listening volume on the headset. When wearing the      headset on your right ear, push the volume button up to increase the volume and    push the volume button down to decrease the volume. The opposite is true when      wearing on left ear.8-5  To mute/unmute the call, press the volume button in. The desk phone talk button on    the base will turn solid red when the headset is muted. 8-6 If the listening volume is still too loud or too soft, adjust the desk phone listening    volume on the base.8-7 If the speaking volume is too loud or too soft for your listener, adjust the desk      phone speaking volume on the base.8-8 Press the call control button on the headset and return the handset to the cradle to    complete the test call.  Do not use headphones / headsets at high volumes for an extended period of time. Doing so can cause hearing loss. Always listen at moderate levels. See plantronics.com/healthandsafety for more information on headsets and hearing.CHARGING TIME20 min  .....................  Minimum charge     before first use3 hours  ...................   Full charge
9 Pairing Savi Base to Bluetooth Mobile Phone9-1 Press and hold the Bluetooth pairing button on the Savi base for three seconds. The    Bluetooth indicator light will alternately flash red and blue.9-2   Place the Bluetooth mobile phone into discover mode. “SAVI” will appear on the phone    when the phone finds the base. 9-3 If prompted by your mobile phone, type “0000” as the passcode.9-4 The Bluetooth indicator light on the base will turn solid blue. Your Savi base is now    paired with your Bluetooth mobile phone. 10 Making a Test Call with Mobile Phone10-1 While wearing your headset, place a call with your mobile phone. The link to the      headset will be brought up automatically.10-2   Adjust the listening volume on the headset or on the mobile phone.10-3 To end the test call, press the call control button on the headset. 11 Connecting to the PC11-1 Connect the USB cable to the USB port on the back of the base.11-2   Connect the other end of the USB cable to the USB port on the PC.11-3 Insert the CD and install the Plantronics software. Follow the installation      instructions shown on your PC.12 Making a Test Call with PC12-1   While wearing your headset, press the PC talk button on the base.12-2 Dial the number using your softphone application.12-3  Adjust listening and speaking volume using your softphone application and/or      “Sounds and Audio Devices” in your PC control panel.12-4  You can fine tune the listening volume and mute/unmute a call from the headset.   (See steps  8-4 and 8-5 above.)12-5  To end the test call, press the call control button on the headset.Registering Your ProductVisit plantronics.com/productregistration to register your product online so we can provide you with the best service and technical support.Getting AssistanceThe Plantronics Technical Assistance Center is ready to assist you. You can nd answers to frequently asked questions, ask a question using e-mail, receive service over the internet, or speak directly with a representative. Visit plantronics.com/support.
Plantronics, Inc.  Tel: 800-544-4660345 Encinal Street  Tel: 831-426-5858Santa Cruz, CA 95060  plantronics.comUnited States©2010 Plantronics, Inc. All rights reserved. Plantronics, the logo design, Savi, and Sound Innovation are trademarks or registered trademarks of Plantronics, Inc. All other trademarks are the property of their respective owners. Microsoft, Internet Explorer, Windows, Windows Vista, and Windows XP are trademarks or registered trademarks of Microsoft Corporation in the US and other countries. Pentium is a trademark of Intel Corporation in the U.S. and other countries.The Bluetooth trademark is owned by Bluetooth SIG, Inc. and any use of the mark by Plantronics, Inc. is under license.Patents U.S. 7,633,963; D582,901; D599,331; China ZL200830005437.x; EM 000873823-0004; Taiwan D127496; and Patents Pending8395402 (04.10)DECLARATIONOF CONFORMITYWe Plantronics, 345 Encinal Street Santa Cruz, California, 95060 USA (800) 544-4660 declare under our sole responsibility that the product WO2 complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residen¬tial installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the inter¬ference by one or more of the following measures:1. Reorient or relocate the receiving antenna.2. Increase the separation between the equipment and receiver.3. Connect the equipment into an outlet on another circuit.4. Consult the dealer or an experienced radio/TV technician for help.Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.FCC REGISTRATION INFORMATION — Part 68This equipment complies with Part 68 of the FCC rules and the requirements adopted by ACTA. On the exterior of this equipment is a label  that contains a product identier in the format US:AAAEQ##TXXXX. If requested, this information must be provided to your telephone company.A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible jack that is also compliant. See installation instructions for details.The REN is useful to determine the quantity of devices you may connect to your telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most, but not all areas, the sum of the RENs should not exceed ve (5.0). To be certain of the number of devices you may connect to your line, as determined by the REN, contact your local telephone company. For products approved after August 8, 2001, the REN for this product is part of the product identier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without the decimal point. (For example, 03 represents a REN of 0.3.) For earlier producers, the REN is separately shown on the label.If this telephone equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn’t practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to le a complaint with the FCC if you believe it is necessary.The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the proper functioning of your equipment. If they do, you will be notified in advance in order for you to make necessary modifications to maintain uninterrupted service.If trouble is experienced with this unit, for repair or warranty information, please contact customer service at (800) 544-4660. If the equipment is causing harm to the network, the telephone company may request that you disconnect the equipment until the problem is resolved.DO NOT DISASSEMBLE THIS EQUIPMENT: it does not contain any user-serviceable components.We recommend the installation of an AC surge arrester in the AC outlet to which this equipment is connected. Telephone companies report that electrical surges, typically lighting transients, are very destructive to customer terminal equipment connected to AC power sources.Exposure to RF RadiationThe internal wireless radio operates within the guidelines found in radio frequency safety standards and recommendations, which reflect the consensus of the scientific community.  Independent studies have shown that the internal wireless radio is safe for use by consumers. Visit plantronics.com for more information.In order to comply with FCC RF Exposure requirements, the base must be installed and operated such that a minimum separation distance of 20 cm is maintained between the base and all persons during normal operation.NOTE:   Modications not expressly approved by Plantronics, Inc. could void the user’s authority to operate the equipment.INDUSTRY CANADA REGULATORY INFORMATIONThis product meets the applicable Industry Canada technical specications/Le présent materiel est conforme aux specications techniques applicable d’ Induristrie Canada. This Class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Navigation menu