TENDA TECHNOLOGY AC7 AC1200 Smart Dual-Band WiFi Router User Manual 1

SHENZHEN TENDA TECHNOLOGY CO., LTD. AC1200 Smart Dual-Band WiFi Router 1

User manual

 Set up you routerScan to download the Tenda WiFi app, or get it on Google Play/App Store.New routerStep 2: Connect to the internetStep 1: Migrate your PPPoE user name and password from                  your original router       Install the routerIf you want to replace your original router connected to the internet with a PPPoE user name and password, start from Step 1. Otherwise, start from Step 2.Quick Installation GuideFor product or function details, please go to www.tendacn.com to download user guide.AC1200 Smart Dual-Band WiFi RouterModel: AC7Package contentsWireless router * 1Power adapter * 1Ethernet cable * 1Quick installation guide * 1If any item is incorrect, missing, or damaged, please keep the original package and contact the local reseller or distributor immediately.Original Router1.  Power off your modem, and remove its battery (if any).2.  Connect the WAN port of the new router to the LAN port of your modem using an Ethernet cable.3. Reinstall your modem's battery, then power on your modem and the new router.FCC StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:— Reorient or relocate the receiving antenna.— Increase the separation between the equipment and receiver.— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.— Consult the dealer or an experienced radio/TV technician for help. The device is for indoor usage only.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Radiation Exposure StatementThis device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules.This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.RECYCLINGThis  product  bears  the  selective  sorting  symbol  for  Waste  electrical  and electronic  equipment (WEEE). This  means  that this  product  must be  handled pursuant  to  European  directive  2012/19/EU  in  order  to  be  recycled  or dismantled to minimize its impact on the environment.User has the choice to give his product to a competent recycling organization or to the retailer when he buys new electrical or electronic equipment.FAQQ1:IcannotlogintothewebUIoftherouterafterenteringtendawifi.com,whatshouldIdo?A1: Try the following solutions and log in again:        Ensure that your Ethernet cable with internet connectivity is plugged into the WAN port of the         router rather than a LAN port.        Ensure that your wireless device is connected to the router's SSID.        Ensure that your wired device is connected properly to port 1, 2 or 3/IPT V of the router by         Ethernet cable. The device is also set to Obtain an IP address automatically and Obtain         DNS server address automatically.        Ensure that tendawifi.com is entered correctly, or try logging by 192.168.0.1.         Replace the web browser.         Reset the router and log in again.Operating Temperature: 0 °C - 40 °COperating Humidity: (10% - 90%) RH, non-condensingCE Mark WarningThis is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.Operations in the 5.15-5.25GHz band are restricted to indoor use only.This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.The mains plug is used as disconnect device, the disconnect device shall remain readily operable.NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. (2) To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable.Declaration of ConformityHereby, SHENZHEN TENDA TECHNOLOGY CO., LTD. declares that the radio equipment type AC7 is in compliance with Directive 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address: http://www.tendacn.com/en/service/download-cata-101.htmlOperate Frequency: 2.4G: EU / 2400-2483.5 MHz (CH1-CH13)5G: EU / 5150-5250 MHz (CH36-CH48)EIRP Power (Max.): 2.4 GHz: 19.86 dBm5 GHz: 22.96 dBmSoftware Version: V15.03.06.XX                      Caution:Adapter Model: BN052-A09009E/BN052-A09009BManufacture: SHENZHEN HEWEISHUN NETWORK TECHNOLOGY CO., LTD.Input: 100 - 240 V AC, 50/60 Hz, 0.3 AOutput: 9 V    1.0 A    : DC VoltageEthernet cable1. Start a web browser on a device that has connected to the router. Enter tendawifi.com in the address bar, and press Enter. 2. Click Start. (If the following page does not appear, refer to Q1 in the FAQ. )3. Confirm or set the related parameters. Then click Next. ( PPPoE is used as an example here.)Connect your wireless devices to the router using the SSID and WiFi password labeled on the bottom/front of the router. Connect devicesTenda_XXXXXXConnect your wired devices to ports 1, 2 or 3/IPTV of the router usingEthernet cables. The LAN indicator fast blinks twice.SettingConnection Type:ISP User Name:ISP Password:.PPPoEImport PPPoE user name and password from the original router Enter the user name from your ISP.Enter the password from your ISP. Skip4. Set your WiFi name (SSID), WiFi password and login password.     Then click Next.        Note: The WiFi password is used to connect to the WiFi network of the router, and the login password is used to log in to the web UI to manage the router.WiFi NameWiFi password of 8-32 characters Not RequiredNot RequiredSet the WiFi password as the login password of the admin account.Login password of 5-32 characters WiFi SettingsReconnect your wireless devices to the router's WiFi network using the WiFi names and the WiFi password you set. The wired devices can access the internet directly if they have connected to port 1, 2 or 3/IPT V.You're all set! You can now connect to  To change settings of other features, click the "More" button below.MoreTip:  If  the  internet  is  still  inaccessible  after  the  configuration, please refer to Q2 in the FAQ.LED indicator Status DescriptionSYSThe router is starting.If the indicator is still solid on after your router completes startup, it indicates that the system is faulty.The router is working properly.Solid onSlow blinkingSolid onFast  blinkingOffThe WAN port is connected properly.Data is being transmitted over the WAN port.The WAN port is disconnected or connected improperly.WiFiSlow blinkingOffThe router is performing WPS negotiation.The WiFi network is disabled.Q2:Icannotaccesstheinternetaftertheconfiguration,whatshouldIdo?A2: Log in to the web UI of the router, and check your router's connection         status on the Internet Status page.        If your router is connected to the internet successfully as the figure        shown below, try the following solutions:Internet Router         Connect your wireless devices to the WiFi network of the router using the         new WiFi name and password you set.        If Connection failed appears on the page:      — Click Internet Settings on the web UI to check whether the connection type               and parameters you entered are correct.Port/Button DescriptionPOWERUsed to start the WPS negotiation process, or to reset the router. WPS: Press the button of the router, and enable the WPS functionof another device within 2 minutes to establish a WPS connection.Reset: When the SYS indicator blinks, hold the button down for about 8 seconds. The router is reset successfully when all the LED indicators blink once.RST/WPSUsed to connect the router to the internet.3/IPTVThey are LAN ports used to connect to wired devices such as computers or switches.WAN        — Connect the Ethernet cable with internet connectivity to your computer.           If your computer cannot access the internet, consult your ISP.           Otherwise, reconnect the Ethernet cable with internet connectivity to your              router, reset your router and configure it again.Q3: How to reset the router?A3: When the SYS indicator blinks, hold down the RST/WPS button for about 8        seconds. The router is reset successfully when all the LED indicators blink once.Technical SupportShenzhen Tenda Technology Co., Ltd.6-8 Floor, Tower E3, NO.1001, Zhongshanyuan Road, Nanshan District, Shenzhen, China. 518052USA hotline: 1-800-570-5892Canada hotline: 1-888-998-8966Website: http://www.tendaus.comEmail: support.usa@tenda.com.cn Hong Kong Hotline: 00852-81931998Website: http://www.tendacn.comE-mail: support@tenda.com.cnCaution:Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. (2) To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable.Copyright © 2018 Shenzhen Tenda Technology Co., Ltd. All rights reserved. Tenda is a registered trademark legally held by Shenzhen Tenda Technology Co., Ltd. Other brand and product names mentioned herein are trademarks or registered trademarks of their respective holders. Specifications are subject to change without notice.1/21 23Connection type Information provided by your ISPPPPoEISP user name and ISP passwordDynamic IP address NoneIP address, subnet mask, gateway, DNS server and other parametersStatic IP addressPower Ethernet jackOrInternetTend a_XXXXXXTend a_XXXXXX     WiFi PasswordPower 1. Power on your original and new routers.2. Connect the WAN port of the original router to port 1, 2 or 3/IPT V of the new router using an Ethernet cable.3. Wait  about 6  seconds  ( When  the WAN,  LAN  indicators  of  the  new  router  turn  solid  on  after blinking fast, your migration is successful).4. Remove the original router.Tip: If you access the internet through Ethernet jack, connect WAN port of the router to the Ethernet jack using an Ethernet cable.WANSolid onFast blinking twiceOffPort 1, 2 or 3/IPTV is connected properly. A new device is connected to port 1, 2 or 3/IPTV.None of ports 1, 2 and 3/IPT V is connected or connected properly.LANSolid onFast  blinkingAt least the 2.4 GHz or 5 GHz WiFi network is enabled.Data is being transmitted wirelessly.Used to connect to the power adapter included in the package.WIFI Press the button once to enable/disable the WiFi network of the router.But if the IPTV function of the router is enabled, it serves only as an IPTV port used to connect to a set-top box.It is a default LAN port.Tenda_xxxxxx    or   Tenda_xxxxxx_5GModem3/IPTV WANRST/WPSWIFIPOWER2 13/IPTV WANRST/WPSWIFIPOWER2 1WANWANEthernet cableEthernet CablePower 3/IPTV WANRST/WPSWIFIPOWER2 1WANAC 7AC 7Operating frequency: 2412-2462MHz, 5150-5250MHz, 5725-5850MHzOperating frequency: 2412-2462MHz, 5150-5250MHz, 5725-5850MHz

Navigation menu