User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1912108 |
| Application ID | oX5XnFcqNad/EbIDlWUK3Q== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 119.15kB (1489397 bits) |
| Date Submitted | 2013-03-06 00:00:00 |
| Date Available | 2013-09-02 00:00:00 |
| Creation Date | 2013-01-24 16:56:37 |
| Producing Software | Adobe Acrobat 6.0 |
| Document Lastmod | 2013-01-24 16:56:38 |
| Document Title | User manual |
| Document Creator | Adobe Acrobat 6.0 |
P/N 5004-EAS911+ REV. B
January 2013
EQUIPMENT SERIAL NO.
SHIPMENT DATE
MODEL EAS911+
EAS-CAP
USER’S GUIDE
TFT, INC.
1953 Concourse Drive
San Jose, CA 95131-1708
TEL: (408) 943-9323
FAX: (408)432-9218
EMAIL: techsupport@TFTInc.com
CONTENTS
SECTION I - GENERAL INFORMATION
Paragraph
Title
Page
1.1
EQUIPMENT DESCRIPTION ..............................................................................................................................1-1
1.2
SPECIFICATIONS. ................................................................................................................................................1-1
1.3
FCC COMPLIANCE STATEMENTS………………………………………………………………………….... 1-4
1.4
WARRANTY INFORMATION ............................................................................................................................1-4
1.5
CLAIMS FOR DAMAGE IN SHIPMENT ............................................................................................................1-4
1.6
TECHNICAL SUPPORT .......................................................................................................................................1-4
SECTION II – PRE-INSTALLATION CHECKOUT
2.1
UNPACKING AND INSPECTION .......................................................................................................................2-1
2.2
FRONT PANEL INDICATORS ............................................................................................................................2-1
2.3
REAR PANEL CONNECTORS ............................................................................................................................2-2
2.4
INTERNAL JUMPERS ..........................................................................................................................................2-3
SECTION III - INSTALLATION
Paragraph
Title
Page
3.1
INTRODUCTION ..................................................................................................................................................3-1
3.2
MOUNTING AND CONNECTION (ANALOG INSERT) ..................................................................................3-1
3.3
MOUNTING AND CONNECTION (DIGITAL INSERT) .................................................................................3-21
SECTION IV – THEORY OF OPERATION
4.1
INTRODUCTION ..................................................................................................................................................4-1
4.2
SYSTEM BLOCK DIAGRAM ..............................................................................................................................4-1
4.3
DETECTION FRAMING CONTROL AND DETECTION VERIFICATION......................................................4-1
4.4
DELAY AND SWITCH..........................................................................................................................................4-2
4.5
DETECTION AND CONTROL .............................................................................................................................4-3
4.6
POWER SUPPLY ...................................................................................................................................................4-3
SECTION V – INSTALLATION
5.1
INTRODUCTION……………………………………………………………………………………………… 5-1
5.2
ENCODER AUDIO OUTPUT LEVEL ADJUSTMENT…………………………………………………… 5-1
CONTENTS (Continued)
5.3
DECODER AUDIO INPUT LEVEL ADJUSTMENT………………………...………………………… 5-2
5,5
DIGITAL INTERFACE (RS232)……………………………………………………………………….… 5-2
5.6
DIGITAL INTERFACE (RS232)…………………………………………………………………………..5-2
5.7
DIGITAL INTERFACE (RS485)…………………………………………………………………………. 5-3
5.8
THE ON-AIR RELAY …………………………………………………………………………………….. 5-3
5.9
THE ALERT RELAY ………………………………………………………………………………………5-3
5.11
SPEAKER INHIBIT ……………………………………………………………………………………... 5-3
5.15
MOVING MESSAGE SIGNS ……………………………………………………………………………. 5-3
SECTION VI – OPERATION
6.1
INTRODUCTION ………………………………………………………………………………………… 6-1
6.2
NETWORK CONNECTION …………………………………………………………………………….. 6-1
6.3
OPERATING MODE DETAILS………………………………………………………………………….. 6-2
6.4
CAP SET UP MODE PROGRAMMING ……………………………………………………………..... 6-3
SECTION VII – THEORY OP OPERATION
7.1
GENERAL DESCRIPTION AND PURPOSE ………………………………………………………….. 7-1
SECTION VIII – MAINTENANCE AND REPAIRS
8.1
INTRODUCTION………………………………………………………………………………………….. 8-1
8.2
TOOL AND TEST EQUIPMENT REQUIREMENTS ………………………………………………… 8-1
8.3
ROUTINE MAINTENANCE …………………………………………………………………….………. 8-1
8.5
DIAGNOSTICS AND REPAIRS ………………………………………………………………………… 8-2
8.7
TROUBLE SHOOTING …………………………………………………………………………………
8-2
8.8
TFT SERVICE DEPARTMENT ……………………………………………………………………….
8-3
APPENDICES
APPENDIX A - ENGINEERING DRAWINGS
APPENDIX B - PARTS LISTS
APPENDIX C - FIPS CODE PART A
APPENDIX C - FIPS CODE PART B
APPENDIX D - 911+ Menu Listing
APPENDIX E_F_ ORIGINATOR and EVENT CODES TRANSLATIONS
APPENDIX G - GLOSSORY
ii
SECTION I
GENERAL INFORMATION
1.1
INTRODUCTION
This EAS911+ User’s Guide is arranged in seven sections, as follows:
Section I: General Information
A general description of the EAS911+, its purpose, its specifications, general information on the FCC designator, FCC
compliance statement, warranty and damage claim procedures, and technical support information.
Section II Getting To Know Your EAS911+ and Related Equipment
Overview of the various system components of the EAS911+ and related equipment. Control and Indicator functions, basic
component functions, and their interconnection.
Section III: Pre-Installation Checkout
Some basic test methodology on the EAS911+ and its related equipment. The user should find it useful to perform the tests in
this section with all the EAS911+ equipment on a lab bench.
Section IV: Programming The EAS911+
Detailed description of setup procedures of various EAS911+ system parameters, e.g. system date and time, station ORG and
FIPS codes, Auto Forward events and locations selection, as well as enabling of optional features.
Section V: Installation
Instruction for installing and adjusting various system components of the EAS911+.
Section VII: Operation
Basic description of I/O control circuits.
Section VIII: Maintenance and Repair
Describes routine maintenance procedures and tools and equipment requirements.
1.2
EQUIPMENT DESCRIPTION
The EAS911+ is a combined Emergency Alert System (EAS) Encoder and Decoder and CAP (Common Alerting
Protocol) receiver that enables broadcasters, cablecasters, and emergency managers to receive, store, forward, and
originate Emergency Alert Messages as required by the FCC’s EAS Rules. By using the EAS digital and CAP protocols
prescribed by the FCC, the EAS911+ can function as a sentinel to alert operators to the receipt of emergency messages.
Forwarding of only certain messages with a minimum of operator intervention can be achieved selectively, simply, and
automatically.
The Encoder section of the EAS911+ is easily programmed to originate emergency alerts in the proper EAS protocol for
specific geographic areas as small as one-ninth of an ordinary county. Although the EAS911+ Decoder stores all
received messages, it only forwards and interrupts programming for those messages that meet users’ specific
instructions. These instructions, protected by two levels of security, relieve the operator of needing to make crucial
decisions at critical times. Operators are guided by the EAS911+ Encoder section front panel layout to program event
codes and locations. Emergency messages can then travel quickly and efficiently through the Emergency Alert System.
Note: EAS messages with the Event code “EAN” cannot be generated by the normal EAS911+. If origination of an
EAN message is needed, contact the factory beforehand.
The EAS911+ has two operating modes: automatic and manual. In automatic mode, only those messages which meet
specific criteria are forwarded to the transmitter. With the exception of the required national level events, only messages
“tagged” by management are allowed to interrupt programming. For minimal or unattended operation, the EAS911+
can perform all the critical emergency alert functions in automatic mode with the optional voice recorder option without
operator assistance. For manual mode, no messages are forwarded, except for required national level messages, unless
sent by an operator. All incoming messages are recorded, and their header information is stored and available for review
or subsequent manual forwarding.
The digital voice message recording makes an incoming audio message, of up to two minutes, always available for
the operator’s immediate review. The operator can then decide whether to forward the last message received after
review of the complete header and voice message. With the EAS911+ voice recorder it is not necessary for the
1-1
operator to transcribe or remember text. A touch screen display gives the operator instant access to the last ten
messages either received or sent.
Six audio inputs and two RS-232 data inputs are standard on the EAS911+ to connect to receivers for the two
required monitoring assignments of the EAS911+. An Internet/Ethernet connection is provided for connection to
CAP servers.
A single audio output connects to external audio switching and distribution systems or to an optional TFT EAS
940A transmitter/program interrupt unit. This optional interrupt unit provides four balanced, isolated input and
output channels that are switched to a combined common signal during an emergency message transmission. The
common audio output provided by the EAS911+ contains all the Header, Attention Signal and EOM codes in proper
EAS format for emergency alerting.
1.3
SPECIFICATIONS
The EAS911+ performance and physical specifications are listed in Table 1.3-1.
Table 1.3-1. EAS911+ Specifications
ENCODER SECTION
Protocol ............................. FCC EAS codes, 520.83 bits per second. 2083.3 Hz mark and 1562.5 Hz space
frequency, ASCII 8-bit characters
Attention Signal ................. 853 and 960 Hz ±5 Hz. Default for 8 seconds, the FCC fixed duration.
PASSWORD Key ............. Enables 3-digit password entry for operator level . Additional 3-digit password required for
program changes
EXIT Key ........................... Interrupts operation in progress and returns system to Banner/Ready mode
PRACTICE Key ................ Allows closed-loop self-test for training and unit performance verification; inhibits on-air
relay closure and transmission of data to COM ports
SEND HEADER Key ........ Activates transmit relay and sends pre-constructed header message
SEND EOM Key ................ Activates transmit relay and sends End Of Message code
EVENT Keys ..................... 12 keys for user-assigned events
WEEKLY TEST Key .......... Allows the EAS routine weekly test to be generated with a minimum of keystrokes
LOCATION(S) Keys .......... 14-keys for user-assigned locations
SUBDIVISION Keys .......... Allows selection of 9 subdivisions within a location
DURATION Keys .............. User-entered duration of the event in prescribed interval
CONFIRM Keys ................ Confirms completion of each step in encoder programming
ON-AIR RELAY LED ......... Indicates that the On-Air relay is closed
DECODER SECTION
REVIEW Key .................... Allows review of last valid received message
LED Indicators................... 5 yellow LEDs to indicate incoming EAS channel, four analog and one digital. Two yellow
LEDs to indicate AUTO or MANUAL forwarding mode of operation and one red LED to
show ALERT relay status
1-2
OPERATION KEYS
SPEAKER Key ........................ Turns speaker ON and OFF; monitors inputs
PRINT Key .............................. Commands the printer to print the item shown on the LCD Screen
ENTER, EXIT, UP ................... Assist initial setup and programming of the equipment
and DOWN Keys
REAR PANEL
Audio Inputs ............................ Six audio channels for FCC EAS or NOAA SAME protocol. Balanced or unbalanced,
10 k-Ohms, approx. 0.5 Vp-p to 2 Vp-p.
Internet/Ethernet Inputs.............Two RJ-45 jacks
Data Channels ........................ RS-232, 1200 baud ASCII, two for input and output
Audio Output ........................... -10 to +10 dBm, 600-ohm balanced, XLR connector
On-Air Relay ............................ Relay contact closure, energized when a selected message is decoded for automatic
forwarding or when the Encoder is activated
Message Alert Relay ............... Relay contact closure, energized when an EAS or CAP message is decoded
RS-485 .................................... Twisted pair wiring connection for optional remote control/status module
Speaker Inhibit ........................ Connects to external switch or relay contacts. Normal operation on contact open.
Speaker operation inhibited (muted) on contact closure
COM1, COM2, COM3 ............. Optional features when the COM Port Expander is installed
and COM4
MECHANICAL AND ENVIRONMENTAL
Input Power ............................. 117 VAC ±10%, 60Hz, 40 watts maximum.
Operating Temperature ........... 0 °C to 50 °C
Size ......................................... 3.5" x 19" x 16"
Net Weight ............................... Approximately 12 lbs.
Shipping Weight ...................... Approximately 14 lbs.
1-3
1.4
Part 11 and Part 15 Compliance Statement
FCC Information:
FCC ID: BIOEAS911PLUS
The TFT EAS911+ is fully compliant with FCC Part 11.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
1.5 WARRANTY INFORMATION
The following warranty policy and limitations are applicable to the Model EAS911+ .
TFT, Inc. warrants each manufactured Model EAS911+ to meet published specifications and to be free from defects
in material and workmanship. TFT will repair or replace, at its expense, for a period of one (1) year from the date of
shipment of equipment, all parts which are defective from faulty material or workmanship. This Warranty does not
cover equipment which has been misused and/or altered by the user. Units found to be defective during the warranty
period shall be returned to TFT with transportation charges prepaid by the BUYER. It is expressly agreed that
replacement and repair shall be the sole remedy of the SELLER with respect to any non-conforming equipment and
parts thereof, and shall be in lieu of any other remedy available by applicable law. All returns to the factory must be
authorized in advance by TFT. Upon examination by the factory, if any EAS911+ Equipment is found to be
defective, the unit will be repaired and returned to the BUYER with transportation charges prepaid by TFT during
the warranty period. Transportation charges for the Encoder and Decoder units found to be defective within the first
30 days of the warranty period will be paid both ways by TFT . Transportation charges for warranty returns wherein
failure is found not to be the fault of TFT or one year after the delivery of the equipment shall be paid both ways by
the BUYER. This warranty does not apply to equipment which, in the opinion of the SELLER, has been altered or
misused.
NO OTHER WARRANTY IS EXPRESSED OR IMPLIED. TFT IS NOT LIABLE FOR ANY
CONSEQUENTIAL DAMAGES.
1.6
CLAIMS FOR DAMAGE IN SHIPMENT
Your instrument should be inspected and tested by the method given in Section II of this manual as soon as it is
received. If the instrument is damaged in any way or fails to operate properly due to transportation damage, file a
claim with the carrier or, if insured separately, with the insurance company.
1.7
TECHNICAL SUPPORT
OUR CUSTOMER SERVICE FOR EAS PRODUCTS IS AVAILABLE FROM 8:00AM TO 5:00PM PACIFIC
TIME MONDAY THROUGH FRIDAY. PLEASE CONTACT US IF YOU NEED ASSISTANCE
TFT, Inc.
1953 Concourse Drive
San Jose, CA 95131-1731
Tel: (408) 943-9323 Fax: (408) 943-9218
Email: techsupport@TFTInc.com
1-4
SECTION II
GETTING TO KNOW YOUR EAS911+ AND RELATED EQUIPMENT
2.1
INTRODUCTION
This section provides an overview description of the EAS911+ equipment including Front Panel controls and indicators,
Rear Panel connectors, options and other related peripheral equipment.
2.2
UNPACKING & INSPECTION
Upon receiving the equipment, inspect its shipping container and contents for shipping damage. Keep all packing
material until equipment performance is confirmed.
If any of the equipment is damaged or fails to operate properly due to transportation damage, file a claim with the
transportation company or, if insured separately, with the insurance company.
The following items should come with the equipment. Please notify TFT if any items are missing.
Description
Installation and Operation Guide
Power Cord
Warranty Notice
Warranty Card
2-PIN Female Terminal Block Connector
6-PIN Female Terminal Block Connector
8-PIN Female Terminal Block Connector
2.3
Part No
5004-EAS911+
1950-7742
3002-0002
3001-0420
1700-1203
1700-5007
Qty
THE FRONT PANEL
The EAS911+ Front Panel is a collection of input switches and touch screen display microphone input and USB port .
Functionally they are as illustrated in Figure 2.3.1 and and described in paragraphs 2.3.1.
2.3.1
Front Panel
Figure 2.3-1. 911+ EAS-CAP Front Panel
2-1
Table 2.3-1. Front Panel
ITEM
TITLE
FUNCTION
Touch screen display
Color, interactive display and control surface to provide information
about operation and programming. Different pages offer EAS and CAP
message information and control of aspects of the EAS911+
Microphone input
3.5mm jack. To provide an microphone audio input to record an
emergency audio message for EAS message origination, substitution
of an audio message from a received message, or to record the premessage audio announcement required for cable system.
USB Port
USB 2.0 To provide connection to various USB devices, typically an
external printer or storage device.
2.4
THE REAR PANEL
The EAS911+ Rear Panel has Input/Output connectors for EAS related or optional equipment. Figure 2.4 shows the
Rear Panel Configuration.
Figure 2.4.1 Rear Panel
Table 2.4 Rear Panel Connectors
ITEM
TITLE
FUNCTION
CH 1, 2, 3, 4, 5, 6 AUDIO INPUT
Provides six balanced inputs for audio from EAS sources.
Program Audio IN/OUT LEFT
High level analog loop through
2-2
3
Program Audio IN/OUT Right
AES Audio
6-pin connector for AES/EBU digital audio loop through
Alert Relay
2-pin connector. 2-wire relay contact. Relay is normally open. Relay
contacts close when a valid EAS message header is decoded.
ON-AIR RELAY
2-wire relay contact. Relay is normally open. Relay contacts close
when an EAS message is transmitted.
GPOUT and GPIN
6-pin connector for control and status of external devices and switches
GPIO Connector
25-pin D-connector for control and status of external devices and
switches
THIS THIS THIS THIS
High level analog loop through
Accessory Port
25-pin D-connector for connection to TFT accessory devices, such as
SDI/HDI video interrupt units
10
RS485, COM1 Port
9-pin D-connector. Bi-directional balanced RS-485 port for an
optional TFT EAS 941A Remote Control/Status Module interface. Also
serves as a tally input when external EAS 941A Remote
Control/Status Modules are not used. See 4.26.1 for operation as a
tally input
11
Character Generator, RS232
9-pin D-connector. Used for digital decoder input and output (RS232, 1200 baud). Decodes, processes and forwards messages in
standard ABAB...ZCZC...LLLL EAS protocol. Also used for RS-232,
1200 baud ASCII output of all decoded EAS headers in EAS
ABAB...ZCZC... protocol. The protocol is preceded by an ASCII text
translation of the header. The translation is prefixed with
PRESELECT: or NONPRESELECT: to indicate whether the message
passed the forwarding filter.
12
Sign, RS232
9-pin D-connector. Used for digital encoder output (RS-232, 1200
baud) of EAS protocol ASCII headers. Outputs all received and
transmitted headers in standard ABAB...ZCZC...LLLL EAS protocol,
as well as the three EOMs (ABAB...NNNN).
13
COM 5
Software defined RS-232 port
14
COM 6
Software defined RS-232 port
15
RS-232
9-pin D-connector.
16
USB
USB 2 for connection to external devices such as printer or storage
devices
17
Ethernet 0
For Internet/Ethernet connection to CAP server
18
Ethernet 1
Not presently supported (future availability)
19
AC Power Switch
12
AC Power Input Socket
2.5
OPTION
2.6
RELATED EQUIPMENT
Recessed IEC connector for a standard U.S. 120 VAC, 60 Hz line
cord.
The EAS911+ can accommodate various external equipment to comprise a complete Emergency Alert System. Some of
this equipment is described in the following paragraphs.
2.6.1
TFT EAS 930A Multi-Module Receiver
The TFT Model 930A Receiver System is a separate, 1-3/4" rack-mount chassis. It can accommodate six different
plug-in receiver types for four available slots:
2-3
• AM
• VHF LOW Public Safety
• FM
• VHF HIGH Public Safety
• NOAA Weather Radio
• UHF Public Safety
These receivers can be used as sources for the EAS911+ audio inputs. This allows a user to plug up to four different
receivers, each with automatic switchover capability, into the chassis, then connect them to the EAS911+. There is one
output per receiver. A separate data sheet is available for the TFT EAS 930A receiver.
2.6.2
TFT EAS 940A Program/Transmitter Interrupt Unit
The TFT Model EAS 940A Program transmitter Interrupt unit interrupts a station's audio program to insert an EAS
Header and voice message. Normal program audio is resumed at the conclusion of the message.
The EAS 940A has four program inputs, an EAS audio input and four program outputs. During an EAS alert, the EAS
audio is routed to all four program outputs. It uses internal audio relays, and it connects to ON-AIR relay contacts J106
and audio output J101 on the EAS911+ rear panel. The EAS 940A can be located up to 2,000 feet from the EAS911+.
2.6.3
TFT EAS 941A Remote Control/Status Module
The EAS 941A Remote Control/Status Module allows limited operation of the EAS911+ from a remote location. It
duplicates certain major functions of the EAS911+ front panel. Interfacing via RS485 single twisted pair wiring to the
EAS911+, the EAS 941A may be located at distances up to 2000 feet.
2.6.4
TFT EAS 943 Telephone Access Unit
The EAS 943 Telephone Access Unit allows public officials, emergency management officials, and authorized personnel
to generate, review, and forward EAS messages using a Touch-Tone telephone. It provides the capability of making
direct “over the air” voice patch or recording and playback of voice messages using the EAS911+’s internal digital voice
recorder. The EAS 943 translates DTMF codes into data commands that are interpreted by the EAS911+ EAS-CAP.
2.7
PRE-INSTALLATION INFORMATION
Before installing your TFT EAS911+, you should be familiar with the requirements of Part 11 of the FCC rules, as
amended.
2.7.1
Obtaining A Copy of the Operational Area/State Plan
The TFT EAS911+ is very flexible and can be adapted to your Operational Area/State Plan. To obtain a copy of the plan,
contact your State’s Emergency Coordinator or the broadcast representative for your operational area. Names of State and
local contacts are available from the FCC website, www.fcc.gov.
2.7.2
Obtaining Monitoring Assignments
The EAS Rules require monitoring two stations in your area and the FEMA IPAWS-OPEN CAP server at
https://apps.fema.gov or other approved CAP server detailed in your State’s operational Area/State Plan. These stations
are listed in the operational Area/State Plan and in the FCC Mapbook, which is also available from the FCC EAS office
in Washington, D.C. In most, but not all cases, the FCC assigned stations will be AM or FM broadcast stations.
2.7.3
Optional/Additional Monitoring
In addition to the FCC assigned stations it may be desirable to monitor other sources and originators of emergency
information who may transmit EAS protocol messages or CAP messages, such as NOAA Weather Radio and local
government authorities.
2.8
PROGRAMMING WORKSHEET FORM
Completing the information on the following work sheet before programming the EAS911+ will greatly reduce the time
required to program the Encoder/Decoder. The worksheet will also provide a convenient record should future reprogramming be required.
2-4
PROGRAMMING WORKSHEET
FCC Monitoring Assignment, CH 1
(Station)
(Frequency)
(Station)
(Frequency)
(Station)
(Frequency)
(Station)
(Frequency)
(Station)
(Frequency)
(Station)
(Frequency)
FCC Monitoring Assignment, CH 2
FCC Monitoring Assignment, CH 3
FCC Monitoring Assignment, CH 4
FCC Monitoring Assignment, CH 5
FCC Monitoring Assignment, CH 6
CAP Server
https://apps.fema.gov
or ________________
Setup Menu
Menu
Description
DAYLIGHT SAVING?
SET STATION TIME
ZONE
SET CURRENT
DATE/TIME
Programmed Settings
DST: ENABLE ___
DST: DISABLE ___
UTC ± ____ Hours
MON DAY YR HR:MIN
SET STATION ORG
CODE
SET STATION FIPS
CODE
0SSCCC (see Appendix C)
SS=State & CCC=County
0__ __ __ __ __
SET STATION
IDENTIFICATION CODE
Station Call Ltrs or other Identifier
"__ __ __ __ __ __ __ __"
10
EAS ____
CIV ____
WXR ____
SET ATTENTION SIGNAL 0-25 SEC
DURATION
(default= 8sec)
SELECT EVENTS TO
AUTO FORWARD
ADR
AVA
AVW
BZW
CAE
CDW
CEM
CFA
CFW
DSW
EQW
EVI
___
___
___
___
___
___
___
___
___
___
___
___
___ SEC
FRW
FFA
FFW
FFS
FLA
FLW
FLS
HMW
HWA
HWW
HUA
HUW
___
___
___
___
___
___
___
___
___
___
___
___
HLS
LEW
LAE
NMN
TOE
NUW
DMO
RHW
RMT
RWT
SVA
SVR
___
___
___
___
___
___
___
___
___
___
___
___
SVS
SPW
SMW
SPS
TOA
TOR
TRA
TRW
TSA
TSW
VOW
WSA
WSW
___
___
___
___
___
___
___
___
___
___
___
___
___
2-5
PROGRAMMING WORKSHEET (Continued)
Setup Menu
Menu
Description
11
ADD LOCATIONS TO
AUTO FORWARD
(256 Locations Max)
13
ASSIGN, CHANGE OR
VERIFY ENCODER
EVENT KEYS
Note: The card may be easily
removed from the holder by
using a folded piece of paper
to push the card up from the
bottom opening slot of the
holder. Three folds
approximatly .1 inch wide
should be sufficient.
14
ASSIGN OR RE-ASSIGN
ENCODER LOCATION
KEYS
(31 Locations Max per Key)
Note: The card may be easily
removed from the holder by
using a folded piece of paper
to push the card up from the
bottom opening slot of the
holder. Three folds
approximatly .1 inch wide
should be sufficient.
16
ENABLE INTERNAL
VOICE RECORDER
17
SET REMOTE SIGN
PROTOCOL
(Requires 4-port COM
Expander Module)
18
ENABLE CHAR GEN
INTERFACE
(Requires 4-port COM
Expander Module)
19
REMOTE INTERFACE
DEFINITION
Programmed Settings
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
WEEKLY TEST
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
STATEMENT
WATCH
WARNING
CONFIRM
1. __________________________
2. __________________________
3. __________________________
4. __________________________
5. __________________________
____________________________
____________________________
____________________________
6. __________________________
7. __________________________
8. __________________________
9. __________________________
0. __________________________
____________________________
SUBDIVISION
CONFIRM
VOICE RECORDER YES (NO)
YES ___
NO ___
NO SIGN
BETA-BRITE
FRIEND SPRING
PRO-LITE V.1
PRO-LITE V.2
____
____
____
____
____
CHAR GEN I/F: OFF
STD
CODI
VDS
ALT1
ALT2
____
____
____
____
____
____
NO INTERFACE ____
PC/DTMF INTERFACE ____
PASSWORD ___ ___ ___
23
2-6
ENABLE REMOTE
CONTROL/STATUS
MODULE INTERFACE
0 REM/TALLY OFF ____
O REM/TALLY ON ____
1-16 REMOTE(S) ____
LOCAL ON AIR ____
REMOTE ON AIR ____
PROGRAMMING WORKSHEET (Continued)
Setup Menu
Menu
24
Description
Programmed Settings
SET ONE-BUTTON
WEEKLY TEST OPTION
FAST RWT YES ____
FAST RWT NO ____
FAST RWT FIPS
25
SET ALERT TIMEOUT
(2-15 Minutes)
26
SET ONE-BUTTON
MANUAL FORWARD
27
ENABLE C.G. TEXT FOR
RWT
(Requires 4-port COM
Expander Module)
28
SET AUTO MODE TIMER
31
SET RANDOM
REQUIRED WEEKLY
TEST
32
SET TRANSMIT DELAY
TIME
(0-10 Seconds)
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
__ __ __ __ __ __
____ MINUTES
FAST FWD: YES ____
FAST FWD: NO ____
RWT CG: NO ____
RWT CG: YES ____
AUTO MODE: OFF ____
AUTO MODE: ON ____
AUTO ON: 00:00 ____:____
AUTO OFF: 00:00 ____:____
RANDOM RWT: OFF ____
RANDOM RWT: ON ____
EARLIEST: 00:00 ____:____
LATEST: 00:00 ____:____
DELAY __.__ SECONDS
2-7
SECTION III
PRE-INSTALLATION CHECKOUT
3.1
INTRODUCTION
This section describes a functional bench test that should be performed before installing and programming the EAS911+
according to the procedures given in Section IV. By completing the pre-installation checkout, the user can be certain that
the equipment is operating properly.
3.2
tabs)
EAS 911+ QUICK START GUIDE (For user to become familiar with the display and function of the
3.2.1
Power Connection
Connect the EAS 911+ to a 120 VAC power source. Note: The unit may take as long as 30 seconds to boot up.
In case of a power failure, the unit will automatically power on after the power is restored. If it does not, push and hold
the Power Switch on the rear of the unit on the rear of the unit above the power plug receptacle and hold it for one
second and then release.
3.2.2
Operating Mode Overview
After the unit is plugged in it boots-up in approximately one minute and at that time it will display the default
DECODER screen with the DECODER tab highlighted in yellow at the top left of the touch screen. The various tabs at
the top of the touch screen turn yellow when touched and access different screens that are briefly explained below:
DECODER tab
Accesses the screen that displays all the decoder operation functions.
ENCODER tab
Accesses the screen for transmitting an EAS message
CAP tab
Accesses the screen that displays a real-time log of the last 100 CAP message
received whether they match the FIPS Include list or not.
3-1
3.2.3
AUDIO INPUTS tab
Displays a full-scale screen view of the 6 audio input channel levels on bar graphs.
Each channel may be heard on the speaker separately.
INFO tab
Gives information about the SYSTEM as a whole, the EAS SERVER, and the CAP
SERVER.
WARNINGS tab
Displays information messages should the unit not have received or transmitted a
weekly or monthly test within eight days.
OPERATING MODE DETAILS
The touch screen has a permanent portion that essentially never changes. It includes the bottom row and the right edge
column of the touch screen. The touch screen is also composed of the various tabs at the top of the screen which bring up
various screens.
3.2.4
PERMANENT PORTION OF THE TOUCH SCREEN
The permanent portion of the touch screen includes the bottom row and a right edge column.
3.2.4.1 The bottom row includes a yellow window box and the CANCEL key. The yellow window box normally
displays the date and time but can also display other messages about the status of the unit. The CANCEL key is used to
cancel a particular function and return to the default DECODER tab.
3.2.4.2
The right column contains the SPEAKER up and down keys to adjust the speaker volume, the
SPEAKER MUTE/ UNMUTED key, SETUP and OPERATION CONFIGURATION keys to gain access the
the SETUP and OPERATION mode programming via password protection, and the ON-AIR and ALERT RELAYS
status.
3.2.5
3.2.6
TOP PORTION TABS OF THE TOUCH SCREEN
DECODER TAB
This tab accesses the screen that displays all the decoder operation functions. It includes the following:
MODE key which toggles between the manual forward and the automatic forward modes via password protection.
AUDIO INPUTS with mini- bargraphs to display audio inputs from Audio Inputs channels 1 – 6. The CAP
indicator displays incoming CAP messages, and the RX-D indicator displays input on the COM 5 1200-baud data
channel.
MESSAGE WAITING key which flashes for each valid incoming EAS message. Touch the flashing MESSAGE
WAITING key to acknowledge the incoming message and extinguish the key and to proceed with other DECODER
functions.
RX LOG window shows the last valid or duplicate alert decoded.
REVIEW RX LOG keys include the NEWEST, NEWER, and the OLDER keys for accessing the last 10 received
EAS messages be they valid, duplicate, or expired.
3-2
PRINT key to allow printing of the message displayed in the RX LOG window to an external printer via the front or
rear USB port.
VOICE MSG key to permit the previewing of the voice message for the alert shown in the RX LOG.
The EAS 911+ is capable of recording and storing ten distinct voice messages, one for each of the ten alerts in the
RX LOG messages.
FORWARD key to permit manual forwarding, with password protection, or one-button forwarding, without
password protection, of a valid alert as long as the time duration of the incoming message has not expired.
3.2.2
ENCODER TAB
This tab accesses the screen that displays all the encoder operation functions. It includes the following:
PRACTICE key to allow the user to send a practice RWT or OTHER alert without engaging the ON-AIR RELAY
or activating the character generator interface. To send a practice alert, touch the PRACTICE key first, followed by
touching either the RWT key or the OTHER key.
RWT key to allow the user to send a one-button or (Fast RWT) if this feature has been programmed and enabled.
OTHER key to allow the user to manually encode and send an alert other than RWT.
TX LOG window shows the last alert transmitted.
REVIEW TX LOG keys include the NEWEST, NEWER, and the OLDER keys for accessing the last 10 transmitted
EAS messages.
PRINT key to allow printing of the message displayed in the TX LOG window to an external printer via the front or rear
USB port.
3.2.3
CAP TAB
This tab accesses the screen that displays a real-time log of the last 100 CAP messages received regardless whether they
match the FIPS Include list or not. It also includes the following:
CAP LOG window to show the last CAP message decoded. A lengthy messages may be accessed by using the up and
down scroll keys.
REVIEW CAP LOG keys include the NEWEST, NEWER, and the OLDER keys for accessing the last 100 received
CAP messages received.
PRINT key to allow printing of a CAP message displayed in the CAP LOG window to an external printer via the front
or rear USB port.
3-3
VOICE MSG key to permit preview of the voice message for the alert shown in the CAP LOG window. If the Enable
Text-to-Speech On Forwarded Messages function is enabled, a text-to-speech conversion of approximately one minute
will take place if the VOICE MSG key is touched to preview a message before sending it; otherwise, the text-to-speech
conversion will take place just before the header is transmitted for manual forwarding or at the beginning of an auto
forward.
FORWARD key to permit manual forwarding, with password protection, or one-button forwarding, without password
protection, of a valid message so long as the time duration has not expired.
VIEW XML SOURCE key, if touched, to permit viewing of the current CAP message displayed in the CAP LOG.
3.2.7
AUDIO INPUTS TAB
Accesses the screen that displays a full scale screen view of the 6 Audio Input Channel levels on 6 individaul bar graphs.
By touching the respective CH key, a channel’s audio can be heard on the speaker provided the speaker mute key is not
set to MUTE and the speaker volume is not set to 0.
3.2.8
WARNINGS TAB
This tab displays informational messages should the unit not have received or transmitted a test within eight
days. Should a warning message be issued, a flashing WARNING WAITING key will flash next to the lower
yellow window box. Touch this key to acknowledge and extinguish it.
3.3
TEST WITH ANCILLARY EQUIPMENT
3.3.1 Test With EAS 930A Multi-Module Receiver
Connect the Audio Output of the EAS 930A Multi-Module Receiver to the EAS911+ Channel 1 Audio Input at CH 1 of
the EAS911+ Rear Panel. Press the SPKR key and listen to the EAS 930A broadcast Audio Output through the
EAS911+ speaker.
At this time it may be convenient to set the audio input levels to the EAS911+. Use an oscilloscope or audio voltmeter to
set the input voltages to approximately 1.5 Volt peak-to- peak.
3.3.2 Test with EAS 940A Program/Transmitter Interrupt Unit
Refer to the instructions for the EAS 940A Program/Transmitter Interrupt Unit.
3.3.3 Test with EAS 941A Remote Control Status Module
Refer to the instructions for the EAS 941A Remote Control/Status Module
3.4
TESTING THE DIGITAL VOICE RECORDER
Connect the EAS 930A Multi-Module Receiver or any other audio source to the EAS911+ Channel 1 Audio Input at CH
1 of the EAS911+ Rear Panel.
Enter the primary and setup passwords by pressing the Front Panel keys in the followingorder:
Press PASSWORD
The screen will read PASSWORD? And the LOCATION(S) numeric keys will illuminate.
Press 9,1,1
(or Primary Password)
The screen will read SELECT EVENT and the EVENT keys will flash.
3-4
Press PASSWORD
The TOUCH SCREEN will read PASSWORD? And the LOCATION(S) numeric keys
will illuminate.
Press 9,1,2
The TOUCH SCREEN
CURRENT
DATE/TIME.
(or Secondary Password)
will read SETUP MENU before changing to read 1. SET
Press the
Arrow key until the TOUCH SCREEN Screen displays "21. RECORD VOICE ANNOUNCEMENT".
Press ENTER twice to start the Digital Voice Recorder recording.
Press EXIT after recording is completed. The Digital Voice Recorder immediately plays back the announcement that
was just recorded. Press EXIT to exit.
3.5 TESTING WITH A VIDEO CHARACTER GENERATOR
Refer to section 4.21 of this Guide and the Character Generator operation manual.
3.6 TESTING WITH A MOVING MESSAGE SIGN
Connect the 2-wire interface cable of the Moving Message Sign to the SIGN RS-232 connector at the Rear Panel of the
EAS911+ (refer to section 5.15 of this Guide). Enable the EAS911+ Remote sign option by following the instructions
outlined in section 4.20 of this Guide, and ensure the power supply for the sign is turned on.
Perform the Required Weekly Test as described in section 3.3, Encoder-to-Decoder Self Test. The EAS message will be
displayed on the Moving Message Sign.
3-5
SECTION IV
PROGRAMMING THE EAS911+
4.1
INTRODUCTION
The EAS911+ can be programmed to customize its configuration and to automate its operation. EAS911+ programming
techniques are described in this section. Programming the EAS911+ is very similar to programming its predecessor, the
EAS911.
4.2
EAS MESSAGE OVERVIEW
A four-part message is used to activate the Emergency Alert System:
1. Preamble and EAS Header Codes
2. Two-tone audio Attention Signal*
3. Voice or text message*
4. Preamble and EAS End Of Message (EOM) Codes.
Not used in the required weekly tests.
The message is shown pictorially in Figure 4.2-1.
Typical EAS Message Timing Diagram
EAS HEADERS
(1)
EAS EOM CODE
TWO-TONE
ATTENTION
SIGNAL
(2)
VOICE,
TEXT, or
VIDEO MSG
(3)
(4)
FSK SIGNAL, APPROXIMATELY ONE SECOND
WHO
WHAT
WHERE
WHEN
PREAMBLE
SYNC CODE
ORIGINATOR
ID
EVENT
CODE
LOCATION
CODE
EVENT
DURATION
UTC
TIME STAMP
STATION
ID
ZCZC-
ORG-
EEE-
PSSCCC+
TTTT-
JJJHHMM
LLLLLLLL-
Example
ZCZC-
EAS-
RWT
006085+
Broadcast Station
Or Cable System
Transmitted Alert
Event Code
FIPS of Locations
Affected by Alert
(5)
0015-
15 Minute
Alert Duration
WHO
(6)
0762049-
TFT_EAS-
MAR 17, 2003 @
12:49 PM PST
(UTC-8 Hrs)
Msg Transmitter/
Re-transmitter ID
Notes:
(1) Headers are repeated 3 times.
(2) Not used in weekly tests. Not used for signalling.
(3) Optional
(4) EOM is repeated 3 times.
(5) Event duration is displayed in hhmm format. i.e. 24 hrs 30 min would be displayed as 2430.
(6) 0762049 UTC – (Julian date, Hrs, Min) refers to day 76 @ 2049 hrs. The sys. takes the local time and adds the time-zone offset from menu 2.
Figure 4.2-1 EAS Message Timing Diagram
The Preamble and EAS Header Codes are transmitted using Frequency Shift Keying (FSK) at a rate of 520.83 bits per
second. Mark frequency is 2083.3 Hz, and Space frequency is 1562.5 Hz. Mark and Space times are 1.92 milliseconds.
Characters are ASCII 7-bit as defined in ANSI X3.4-1977.
4-1
The Attention Signal is transmitted after the EAS header codes and is made up of two simultaneously transmitted tones.
The fundamental frequencies of these tones are 853 and 960 Hz.
4.2.1
The EAS Header
The EAS header consists of seven segments:
1. Preamble Sync Code
2. Originator ID*
3. Event Code*
4. Location code (including county subdivision code)*
5. Event Duration
6. Time Stamp*
7. Station ID*
Requires user programming before installation.
Details of these codes are described in the FCC Rules and Regulations Part 11, Subpart B, Section 11.31/EAS Protocol and in
Appendix C of this guide.
The following paragraphs provide a user guide for setting the programmable segments of the EAS Header.
4.2.2
Two-Tone Attention Signal
The two-tone attention signal is the same as the old EBS: 853 Hz and 960 Hz tones. It is used only in the required monthly tests
and activation of the EAS. It is not used in the required weekly test (RWT). It is no longer used for signaling.
The default duration of the two-tone signal is 8 seconds; however, its duration is user programmable up to 25 seconds. See
Section 4.9 for details.
4.2.3
Getting Started – Setup Menu Programming
The display on the EAS911+ contains “soft” keys, color indications, and information to guide you through the setup and
operation procedures. Programming the EAS911+ is very similar to programming its predecessor EAS911. It is very important
to assemble the information in Section 2, Paragraph 2.8, before you begin. The programming follows the same order as shown
in the Programming Summary Sheet. Programming the EAS911+ requires entry of a Primary Password and a Setup Password
to allow access to the Setup Menu. The default passwords are 911 and 912, respectively. See Section 4.10 and 4.11 for
information on changing the default passwords. Proceed as follows:
1.
2.
Enter the Primary password by pressing PASSWORD and entering 9, 1, 1, the 3-digit password, using the 0-9
numeric keys under LOCATION(S).
Press PASSWORD and enter 9, 1, 2, the 3-digit Setup password, using the 0-9 numeric keys under LOCATION(S).
Once the correct passwords have been entered, the LCD Screen will display SETUP MENU briefly then display the first menu
item: 1. SET CURRENT DATE/TIME
Use the Arrow keys (∆ ∇) to scroll through the Setup Menu items. The Setup Menu items are listed in Table 4.3-1. When a
desired menu item is displayed, press ENTER to select it.
4.3
Menu Item 1. SET CURRENT DATE/TIME
NOTE: In order to properly set the Date/Time, program in the following order:
A) Setup Menu 3. DAYLIGHT SAVING?
B) Setup Menu 2. SET STATION TIME ZONE
C) Setup Menu 1. SET CURRENT DATE/TIME
This menu sets the current date and local time.
Press the ENTER key while 1. SET CURRENT DATE/TIME is displayed on the LCD Screen.
The LCD Screen will display the current date and time in 24-hour format.
EXAMPLE:
JAN 01 95 18:00
JAN will flash, indicating that it may be changed using the Arrow (∆ ∇) keys.
4-2
After finding the correct month with the Arrow keys, press ENTER to accept the displayed month. The Day, Year, Hour
and Minute are set in the same manner. Clock seconds are not shown, but are zeroed when ENTER is pressed for
selecting the desired minute.
4-3
Table 4.3-1. Setup Menu Items
Menu Item
Refer to Manual Section
1. SET CURRENT DATE/TIME
4.3
2. SET STATION TIME ZONE
4.4
3. DAYLIGHT SAVING?
4.5
4. SET STATION ORG CODE
4.6
5. SET STATION FIPS CODE
4.7
6. SET STATION IDENTIFICATION CODE
4.8
7. SET ATTENTION SIGNAL DURATION
4.9
8. CHANGE PRIMARY PASSWORD
4.10
9. CHANGE SETUP PASSWORD
4.11
10. SELECT EVENTS TO AUTO FORWARD
4.13
11. ADD LOCATIONS TO AUTO FORWARD
4.14
12. VERIFY OR DELETE LOCATIONS TO AUTO FORWARD
4.15
13. ASSIGN, CHANGE OR VERIFY ENCODER EVENT KEYS
4.16
14. ASSIGN OR RE-ASSIGN ENCODER LOCATION KEYS
4.17
15. VERIFY/EDIT ENCODER LOCATION KEY ASSIGNMENT
4.18
16. ENABLE INTERNAL VOICE RECORDER
4.19
17. SET REMOTE SIGN PROTOCOL
4.20
18. ENABLE CHAR GEN INTERFACE
4.21
19. REMOTE INTERFACE DEFINITION
4.22
20. SET LCD CONTRAST
4.23
21. RECORD VOICE ANNOUNCEMENT
4.24
22. VERIFY VOICE ANNOUNCEMENT
4.25
23. ENABLE REMOTE CONTROL/STATUS MODULE INTERFACE
4.26
24. SET ONE-BUTTON WEEKLY TEST OPTION
4.27
25. SET ALERT TIMEOUT
4.28
26. SET ONE-BUTTON MANUAL FORWARD
4.29
27. ENABLE C.G. TEXT FOR RWT
4.30
28. SET AUTO MODE TIMER
4.31
29. RECORD ALERT VOICE MESSAGE
4.32
30. VERIFY ALERT VOICE MESSAGE
4.33
31. SET RANDOM REQUIRED WEEKLY TEST
4.34
32. SET TRANSMIT DELAY TIME
4.35
4-4
4.4
Menu Item 2. SET STATION TIME ZONE
This command permits setting the number of hours that must be added to local Standard Time to reach Universal Coordinated
Time (UTC), also known as Greenwich Mean Time (GMT). Proceed as follows:
1.
Use the Arrow keys to change to menu item 2.
2.
Press the ENTER key while 2. SET STATION TIME ZONE is displayed on the LCD Screen. The Arrow keys
can be used to adjust the offset from -12 to +12 hours.
3.
Press ENTER to accept the correct displayed UTC offset.
UTC offsets for the U.S. are listed in Table 4.3-2.
Table 4.3-2. UTC Offsets for the U.S.
TIME ZONE
UTC OFFSET
Eastern Standard Time
- 05 Hours
Central Standard Time
- 06 Hours
Mountain Standard Time
-07 Hours
Pacific Standard Time
-08 Hours
Alaskan Standard Time
-09 Hours
Hawaiian Standard Time
-10 Hours
Note
The UTC offset is always calculated with respect to standard time, not daylight saving
time.
4.5
Menu Item 3. DAYLIGHT SAVING?
Daylight saving time starts at 2 a.m. standard time on the first Sunday in April and ends on the last Sunday in October at 2 a.m.
daylight time. The EAS911+ automatically adjusts the local time for daylight saving time if enabled. Proceed as follows:
1.
Press the ENTER key while 3. DAYLIGHT SAVING? is displayed on the LCD Screen. The LCD Screen will
then display DST: ENABLE or DST: DISABLE.
2.
When the desired condition is displayed on the LCD Screen, press ENTER to accept it.
EXAMPLE:
DST: ENABLE appears on the LCD Screen. If necessary, press Arrow key ∆ or ∇ to toggle to DST: DISABLE.
When the desired condition is displayed on the LCD Screen, press ENTER to accept it.
Recommended: Set for daylight saving time ENABLE.
4-5
4.6
Menu Item 4. SET STATION ORG CODE
The ORIGINATOR code for the station must be selected from Table 4.6-1:
Table 4.6-1 Originator Codes
ORG CODE
ORIGINATOR
CIV
Civil Authority
EAS
Broadcast Stations or Cable System
WXR
National Weather Service
PEP
PRIMARY ENTRY POINT
Proceed as follows:
1.
Press the ENTER key while 4. SET STATION ORG CODE is displayed on the LCD Screen. The LCD Screen
will display the currently selected 3-character ORG code.
EXAMPLE:
EAS Broadcast Station or Cable System
As the Arrow keys are pressed, the LCD Screen will display the ORG codes available, and a description of each.
Press ENTER to select a displayed ORG code.
4.7
Menu Item 5. SET STATION FIPS CODE
The Federal Information Processing System (FIPS) code (See Appendix C of this Guide) consists of six digits:
PSSCCC.
Defines a subdivision, and must be 0 for station FIPS identification.
SS
Is a 2-digit State code.
CCC
Is a 3-digit County code.
Press the ENTER key while 5. SET STATION FIPS CODE is displayed on the LCD Screen.
The LCD Screen will display the currently selected station FIPS code.
EXAMPLE:
STATION: 006085
Flashing digits will prompt for entry of the 2-digit state code followed by the 3-digit county code. Use numeric keys
0-9 to enter FIPS code digits. The ∇ key will backspace; the ∆ key will forward space. After the last digit is entered,
the selected location will be displayed to prompt the operator to accept it. Press ENTER to accept the displayed FIPS
code. Press EXIT to cancel an entry.
EXAMPLE:
006085 SANTA CLARA CA
The 006085 will be stationary and flashing; SANTA CLARA CA will scroll from right to left.
For the Cable Version of the EAS911+:
Press the SUBDIVISION key.
ZONE: ♦
code appears on the LCD, when code is ALL or 1 to 16.
Use the arrow keys (∆ ∇) to scroll through the list of 16 zones.
Select a zone for encoding by pressing the ENTER key. The presence of the
indicates that the zone is
selected. Pressing the ENTER key will toggle the diamond (♦) to change the status of each zone.
Press EXIT to confirm and end.
4-6
4.8
Menu Item 6. SET STATION IDENTIFICATION CODE
This is the call sign of a broadcast station or other identification of a cable station, or NWS office transmitting or forwarding
the message. This code is automatically affixed to all outgoing messages by the EAS encoder. It is limited to 8 characters.
1.
Press the ENTER key while 6. SET STATION IDENTIFICATION CODE is displayed on the LCD Screen.
The LCD Screen will display the currently selected identification code.
EXAMPLE:
“WTFT/FM “ is displayed on the LCD Screen.
W will begin flashing, indicating that it may be changed using the Arrow keys.
After finding the correct alphanumeric character with the Arrow keys, press ENTER to accept.
T will begin flashing, indicating that it may now be changed in the same way using the Arrow keys and the
ENTER key to accept.
This procedure is repeated until all the characters have been updated.
4.9
Menu Item 7. SET ATTENTION SIGNAL DURATION
The attention signal is made up of 853 Hz and 960 Hz tones and is sent after the Headers. The duration of this signal is
programmable from 0 to 25 seconds.
1.
Press the ENTER key while 7. SET ATTENTION SIGNAL DURATION is displayed on the LCD Screen.
The LCD Screen will display the currently selected Attention Signal duration.
EXAMPLE:
08 SECONDS is displayed on the LCD Screen with 08 flashing.
The Arrow keys increment (∆) and decrement (∇) the duration in 1-second steps. Pressing ENTER accepts the
indicated duration.
4.10
Menu Item 8. CHANGE PRIMARY PASSWORD
The primary password is used for Encoder access and consists of 3 digits. It is set to 911 at the factory and is configurable
from 000 to 999.
Press the ENTER key while 8. CHANGE PRIMARY PASSWORD is displayed on the LCD Screen.
The LCD Screen will display the current primary password.
EXAMPLE:
911 PRIMARY is displayed on the LCD Screen. The first digit, 9, will begin flashing, indicating that it may be
changed by pressing one of the numeric entry keys 0-9. After a digit is entered, the next digit will begin flashing.
After all three digits have been entered, the entire password will flash, prompting for verification.
EXAMPLE:
911 VERIFY will be displayed, with 911 flashing. Press ENTER to accept; press EXIT to leave the password
unchanged.
4.11
Menu Item 9. CHANGE SETUP PASSWORD
The Setup Password is used for Setup Menu access and consists of 3 digits. It is set to 912 at the factory and is configurable
from 000 to 999.
Press the ENTER key while 9. CHANGE SETUP PASSWORD is displayed on the LCD Screen.
The LCD Screen will display the current Setup password.
EXAMPLE:
912 SETUP is displayed on the LCD Screen, with 9 flashing. The Setup password may be changed in the same manner
as the Primary password.
4-7
4.12
RECOVER LOST PASSWORD
If a changed password is lost or forgotten, it cannot be recovered; however, the default Primary and Setup passwords can be
restored by entering the following key sequence when in Ready mode. Each of the following key entries will cause PRESS
PASSWORD to appear in the LCD. Do NOT press PASSWORD, but WAIT FOR THE DATE AND TIME TO RETURN
before pressing the next key:
Press CANCEL, EVENT CONFIRM, 4, 0, 8, 7, 2, 7, 7, 2, 7, 2, LOCATION(S) CONFIRM. (Do This SLOWLY)
You will hear a tone acknowledging restoration of the default passwords. The default Primary password is 911; the default
Setup password is 912.
4.13
Menu Item 10. SELECT EVENTS TO AUTO FORWARD
EAS events may be selected for auto forwarding. When in Auto Mode, the event code contained in a header will be compared
with the event codes selected for automatic forwarding to help decide whether the message should be forwarded.
In Auto Mode, priority EAN events will be forwarded automatically without delay. In Manual
Mode, EAN events must be manually forwarded without delay by the operator.
Press ENTER while 10. SELECT EVENTS TO AUTO FORWARD is displayed on the LCD Screen. The first EAS
event will be displayed. The event will appear in a static display, the description will scroll.
EXAMPLE:
♦ ADR Administrative Message
The ♦ character indicates that the event has been selected for automatic forwarding. If the diamond is absent, the event
has not been selected. The ENTER key selects or deselects an event.
The Arrow keys select the next event in alphabetical order. The ENTER key is again used to choose to forward the next
displayed event. The process continues until all events have been defined. Press EXIT to end.
4.14
Menu Item 11. ADD LOCATIONS TO AUTO FORWARD
A list of locations to Auto Forward should be specified. When in Auto Mode, the location code contained in a header will
be compared with the location codes selected for automatic forwarding to help decide whether the message should be
forwarded. A maximum of 256 locations may be forwarded.
Press ENTER while 11. ADD LOCATIONS TO AUTO FORWARD is displayed on the LCD Screen. The LCD
Screen will display a location of 000000.
EXAMPLE:
FORWARD: 000000 appears on the LCD Screen.
Flashing digits prompt for entry of the 2-digit state and 3-digit county code. Use the numeric 0-9 keys to enter FIPS
code digits. the ∇ key will backspace; the ∆ key will forward space. When the last digit is entered, the selected location
will be displayed for acceptance.
EXAMPLE:
006085 SANTA CLARA CA
The FIPS code will flash in a static display; a description of that location will scroll. Press ENTER to add the location
displayed; press EXIT to reject it.
More locations may be added in the same manner. Duplicate locations are not permitted.
The Cable version of the EAS911+ has the capability of addressing additional zones through an RF modulator when
used with the TFT cable in-home alerting device. Zone programming is described in Section 4.15 below.
4-8
4.15
Menu Item 12. VERIFY OR DELETE LOCATIONS TO AUTO FORWARD
This menu item permits verification or deletion of location codes previously selected for automatic forwarding.
Press ENTER while 12. VERIFY OR DELETE LOCATIONS TO AUTO FORWARD is displayed on the LCD
Screen.
The first of the locations selected for automatic forwarding is displayed on the LCD Screen. The FIPS code is shown in
a static display, and a description of that location scrolls.
EXAMPLE:
♦
006085 SANTA CLARA, CA appears on the LCD Screen.
The ♦ indicates that this location has been selected for automatic forwarding. The ENTER key will toggle the diamond
off/on, changing the status of each location. The ∆ and ∇ keys can be used to scroll through the list.
Press EXIT after deleting locations to forward.
Press ENTER to accept changes to the list of locations to forward. If EXIT is pressed, no changes will be made.
Duplicate locations are allowed.
For the Cable Version of the EAS911+:
The cable version of the EAS911+ has the capability of addressing zones of a cable system through an RF modulator.
TFT cable in-home alerting devices can be addressed at one of 16 zones and be selectively alerted by the modulator to
Events specific to that zone. Any zone or combination of zones can be assigned to one of the first 20 FIPS codes to be
auto forwarded.
In Setup Menu 12. VERIFY OR DELETE LOCATIONS TO AUTO FORWARD, select the desired FIPS code, for
example:
♦
006085 SANTA CLARA CA appears on the LCD.
Press the SUBDIVISION key.
ZONE: ♦
code appears on the LCD, when code is ALL or 1 to 16.
Use the arrow keys (∆ ∇) to scroll through the list of 16 zones.
Select a zone for auto forward by pressing the ENTER key. The presence of the ♦ indicates that the zone is
selected. Pressing the ENTER key will toggle the diamond (♦) to change the status of each zone
Press EXIT to confirm and end.
4.16
Menu Item 13. ASSIGN, CHANGE OR VERIFY ENCODER EVENT KEYS
There are 11 encoder event keys that may be customized by assigning events appropriate to a station's broadcast area. Each key
may be assigned either a defined EAS event code or an event code template based on the currently defined EAS event codes.
An event code template may be used, along with the STATEMENT, WATCH, and WARNING keys, to encode an EAS event
code when in Encoder Operational Mode. Note that the WEEKLY TEST key is pre-assigned with the EAS event code for the
Required Weekly Test event (RWT) and cannot be changed. Access to certain event codes with national significance (for
example EAN, EAT, NPT, NIC) is restricted.
Press ENTER while 13. ASSIGN, CHANGE OR VERIFY ENCODER EVENT KEYS is displayed on the LCD
Screen.
The Encoder event LEDs will begin flashing, and the LED screen will display EVENT KEY?
When an event key is pressed, the LED for that key will illuminate, and all other event key LEDs will extinguish. The
LCD Screen will then prompt by displaying the event currently assigned to that event key. The EAS event code or an
event code template will be shown in a static display, and a description of that event code or template will scroll.
However, the LCD Screen will display NOT ASSIGNED if a previously unassigned event key is selected.
4-9
EXAMPLES:
RMT Required Monthly Test
CEM Civil Emergency
SVS Severe Weather Statement
TO? Tornado Template
Actual EAS event codes appear in the static display. The Arrow keys select the next EAS event code or event code
template in alphabetical order. Press the ENTER key to select the currently displayed event. Other encoder event keys
may then be assigned in an identical manner. After that particular key is assigned, all the event LEDs will begin flashing
for the next encoder event key assignment in an identical manner.
To verify encoder EVENT key assignments, select an EVENT key as described above, then press EXIT after verifying the
event or template assigned to that key.
4.17
Menu Item 14. ASSIGN OR RE-ASSIGN ENCODER LOCATION KEYS
Encoder LOCATION keys may be customized by assigning to them locations relevant to a station’s broadcast area. A maximum
of 31 locations may be assigned to each LOCATION key.
Press ENTER while 14. ASSIGN OR RE-ASSIGN ENCODER LOCATION KEYS is displayed on the LCD Screen.
The encoder LOCATION LEDs will begin flashing, and the LCD Screen will display LOCATION KEY?
When a LOCATION key is pressed, the LED for that key will be lit, and all other encoder LOCATION key LEDs will be
extinguished. A 000000 FIPS code will be displayed to serve as a starting point for assigning FIPS codes to the selected
LOCATION key.
EXAMPLE:
FIPS 01: 000000
Flashing digits on the LCD will prompt for entry of the 1-digit subdivision code, the 2-digit state code followed by the
3-digit county code. Use the numeric keys 0-9 to enter FIPS code digits. The ∇ key will backspace; the ∆ key will
forward space. After the last digit is entered, the selected location will be displayed to prompt the operator to accept it.
Press ENTER to accept the displayed FIPS code.
006085 SANTA CLARA
The FIPS code will flash in a static display; a description of the location will scroll. Press ENTER to accept the location
displayed and add it to the list of locations assigned to the selected LOCATION key. Press EXIT to reject. If accepted,
the LCD Screen will be updated.
Other FIPS codes may be assigned to the selected LOCATION key in the same manner. Press EXIT to end. The system
will return to the Setup Menu after 31 FIPS codes have been assigned.
For cable versions zone programming in Setup Menu 14. ASSIGN OR RE-ASSIGN ENCODER LOCATION
KEYS is similar to that in Section 4.15 above. After all FIPS codes have been assigned to a Location key,
For the Cable Version of the EAS911+:
Press the SUBDIVISION key.
ZONE: ♦
code appears on the LCD, when code is ALL or 1 to 16.
Use the arrow keys (∆ ∇) to scroll through the list of 16 zones.
Select a zone for encoding by pressing the ENTER key. The presence of the ♦ indicates that the zone is selected for
encoding. Pressing the ENTER key will toggle the diamond (♦) to change the status of each zone
Press EXIT to confirm and end.
4-10
4.18
Menu Item 15. VERIFY/EDIT ENCODER LOCATION KEY ASSIGNMENT
Permits a review of the locations previously assigned to the encoder LOCATION keys.
Press ENTER while 15. VERIFY/EDIT ENCODER LOCATION KEY ASSIGNMENT is displayed on the LCD Screen.
The Encoder LOCATION key LEDs will begin flashing; the LCD Screen will display: LOCATION KEY? When a LOCATION
key is pressed, the LED for that key will light, and all other Encoder LOCATION keys will extinguish. If the selected
LOCATION key has not yet been assigned, the LCD Screen will display NOT ASSIGNED! briefly, and another LOCATION
key may then be selected. If the selected LOCATION key has been assigned, the first location assigned to that key will be
displayed on the LCD Screen. The FIPS code will be static and a description of that location will scroll.
EXAMPLE:
006085 SANTA CLARA CA
Use the Arrow keys to view other locations assigned to the LOCATION key. To verify another LOCATION key, press
that key. Press EXIT to return to the Setup Menu.
To delete a FIPS code:
Select the FIPS code to be deleted with the Arrow (∆ ∇) keys.
Press CANCEL.
The LCD will display DELETE FIPS?
Press ENTER to delete, or:
Press EXIT to leave the FIPS unchanged.
4.19
Menu Item 16. ENABLE INTERNAL VOICE RECORDER
Verify the presence of the internal voice recorder.
Press ENTER while 16. ENABLE INTERNAL VOICE RECORDER is displayed on the LCD Screen.
The LCD Screen will display VOICE RECORDER: YES (NO).
YES indicates that the voice recorder is installed and enabled. NO indicates that the voice recorder is not installed or it
is not enabled. Hardware will detect the presence of the voice recorder and automatically enable it if installed. This
function can be used to enable or disable the voice recorder via software.
4.20
Menu Item 17. SET REMOTE SIGN PROTOCOL
The COM4 port on the 4-Port Communication Expander Option Module sends serial data to a remote electronic sign through a
single twisted-pair interface using RS-232 levels. The protocol must be set for the particular electronic sign being used.
Press ENTER while 17. SET REMOTE SIGN PROTOCOL is displayed on the LCD Screen.
The LCD Screen displays the name of the electronic sign manufacturer.
EXAMPLE:
FRIEND SPRING
Press the Arrow keys to view other protocols. Press the ENTER key to select the desired protocol when displayed. Press
EXIT for no change.
4.21
Menu Item 18. ENABLE CHAR GEN INTERFACE
This command enables or disables the character generator interface.
The COM2 port on the Four Port Communications Expander Option Module sends serial data to remote character generators
using RS-232 levels.
Press ENTER while 18. ENABLE CHAR GEN INTERFACE is displayed on the LCD Screen.
The LCD Screen will display STD. It will then scroll the following: Standard TFT I/F for BSS, Frontline, and D Co.
EAS Systems
4-11
The following six submenus are available:
CHAR_GEN_I/F:OFF
STD
Standard TFT I/F for BSS, Frontline, and D Co. EAS Systems
CODI
Direct Interface to CHYRON CODI
VDS
Direct Interface to VDS 840
ALT1
Alternate TFT I/F for Trilithic EAS Systems
ALT2
Alternate TFT I/F for Next Level EAS Systems
Use the Arrow keys to select the desired submenu, then press ENTER to select the displayed setting.
If the TFT standard interface is enabled, a character generator must communicate properly in the TFT protocol in
order for the EAS911+ to forward EAS alerts automatically. If the TFT interface is enabled and a character
generator is not connected or communicating, all auto-forwarded messages will be aborted. A message can
always be manually forwarded to allow the audio to be transmitted even if the character generator is not
connected. If the CODI interface is enabled, messages will not be aborted if the CODI is not connected.
If the CODI interface is selected by pressing ENTER when CHYRON CODI I/F is displayed, you may use the
arrow keys and ENTER to select the sub menus listed below. Again use the arrow keys to select the desired value
and press ENTER to store the value. Press the EXIT key to move one level up in the menu selection process. The
factory set default parameters are shown first in the menu listing below.
Note:
Horizontal Phase, Subcarrier Phase and Key Delay should only be adjusted using the alignment
procedures described in the Chyron CODI Operator Manual.
SET CHAR HEIGHT
Height = 5 (range is 1-7)
SET COLOR
Color:White (also Magenta, Blue, Cyan, Yellow, Green, Red, Black)
SET CRAWL SPEED
Speed = 2 (range is 1-6)
SET CRAWL COUNT
Crawl Count = 1 (range is 1-8)
SET DISPLAY LINE
Line = 50 (range is 30-160)
SET HORIZ PHASE
H Phase = 0 (range exceeds ± 90)
SET SUBCA PHASE
SubC Phase = 0 (range exceeds ± 90)
SET KEY DELAY
Key Delay = 0 (range is ± 10)
If the VDS interface is selected by pressing ENTER when VDS I/F is displayed, you may use the arrow keys and
ENTER to select the submenus listed below. Again use the arrow keys to select the desired value and press
ENTER to store the value. Press the EXIT key to move one level up in the menu selection process. The factory
set default parameters are shown first in the menu listing below.
SET CHAR HEIGHT
Height = 3 (range is 1 to 4)
SET COLOR
Color:White (also Yellow Cyan, Green, Magenta, Red, Blue or Black)
SET CRAWL SPEED
Speed = 2 (range is 1-3)
SET CRAWL TIME
Time = 2 MIN (range is 1-9 min)
SET DISPLAY LINE
Line = 40 (range is 40-100)
SET VDS EDITOR
OFF (When ON, the ALERT RELAY will close during EAS transmission
to control VDSs second COM port. The relay will stay closed until
the VDS’s timeout. When OFF, all operation is normal.)
4-12
4.22
Menu Item 19. REMOTE INTERFACE DEFINITION
The COM3 port on the Four-Port Communications Expander Option Module uses full duplex serial data to communicate with a
remote telephone interface using RS-232 levels.
Press ENTER while 19. REMOTE INTERFACE DEFINITION is displayed on the LCD Screen.
The following two submenus are available:
NO INTERFACE
PC/DTMF INTERFACE
When PC/DTMF interface is enabled, COM3 must be connected to the EAS 943 telephone interface.
4.23
Menu Item 20. SET LCD SCREEN CONTRAST
This menu item is used to set the LCD Screen contrast. There are 4 contrast levels (0 to 3), with 0 giving the least, and 3 giving
the most contrast.
Press ENTER while 20. SET LCD CONTRAST is displayed on the LCD Screen.
The LCD Screen displays the current LCD Screen contrast setting.
EXAMPLE:
LCD CONTRAST: 2 is displayed on the LCD Screen.
Press the Arrow keys to select other contrast settings. The LCD Screen will reflect the new contrast setting. Press
ENTER to accept the displayed setting. Press EXIT for no change.
4.24
Menu Item 21. RECORD VOICE ANNOUNCEMENT (for cable systems only)
For cable pointer to details channel, an announcement may be prerecorded for later playback. To record the announcement, the
Voice Recorder must be installed and enabled. Connect the audio source to the Channel 1 (CH1) audio input of J102 on the
EAS911+ rear panel or connect a microphone to the 3.5 mm TRS jack on the front panel. The maximum announcement
duration is 25 seconds.
Press ENTER while 21. RECORD VOICE ANNOUNCEMENT is displayed on the LCD Screen.
The LCD Screen will display a bar graph of the signal level on CH1. The audio from CH1 will be heard through the
speaker. Use the bar graph to adjust the input signal level. Press ENTER to begin recording. The LCD Screen will
display the elapsed duration as the announcement is recorded.
EXAMPLE:
RECORDING: 01
Press EXIT to terminate recording. After the announcement has been recorded, it will automatically be replayed. Press
EXIT to end.
4.25
Menu Item 22. VERIFY VOICE ANNOUNCEMENT (for cable systems only)
The prerecorded voice announcement can be played back from the Voice Recorder. The Voice Recorder must be installed and
enabled and the announcement must have been recorded previously.
Press ENTER while 22. VERIFY VOICE ANNOUNCEMENT is displayed on the LCD Screen.
The SPKR LED lights to allow adjustment of speaker volume.
The LCD Screen will display: ANNOUNCEMENT: 25 (or the length of the recorded announcement in seconds).
The speaker will play back the prerecorded announcement.
The LCD Screen will count down as the announcement is replayed. Press EXIT to interrupt playback and return to the
Setup Menu.
4-13
4.26
Menu Item 23. ENABLE REMOTE CONTROL/STATUS MODULE INTERFACE
The EAS911+ can communicate with a maximum of sixteen EAS Model 941 Remote Control/Status Modules.
Press ENTER while 23. ENABLE REMOTE CONTROL/STATUS MODULE INTERFACE is displayed on the
LCD Screen.
The number of Remote Control/Status Modules currently configured will be displayed on the LCD Screen.
EXAMPLE:
0 REMOTES
Use the Arrow keys to select the number of Remote Control/Status Modules connected to the EAS911+. Select 0 to
disable. Press ENTER to set the number of remotes selected. Press EXIT for no change.
If one or more remotes are selected, the ON AIR RELAY of the EAS911+ can be activated locally or remotely.
Use the arrow keys to select either Local On Air or Remote On Air and press ENTER. When Local On Air is
selected, the On-Air relay for the EAS911+ closes only when the EAS911+ initiates an On-Air action. This
permits independent On-Air control for individual stations when EAS 941A Remote Control/Status Modules are
used with the EAS911+ in a multi-station application. When Remote On Air is selected, the On-Air relay for the
EAS911+ closes when the EAS911+ or any connected EAS 941A Remote Control/Status Module requests an OnAir action.
4.26.1
Tally Mode Operation
In Auto Forward Mode, the RS-485 Remote Control and Status interface can be used as a Tally input when EAS 941A
Remote Control/Status Modules are not used. To enable this mode, select 0 REM/TALLY ON from the Remote
Control/Status Module menu (SETUP item 23). The mode is disabled by selecting 0 REM/TALLY OFF from the
menu. Biasing the input as shown below in Figure 4-26-1 will permit a Normally Open tally contact to delay an Autoforwardable message, then release it for forwarding with a momentary closure.
When viewing the rear of the EAS911+, pin 1 of J105 is on the left; pin 2 is on the right. The Alert Relay contacts,
J107, can be used to notify the automation system that an alert has been received. If the tally contacts do not close, the
alert will be forwarded automatically after 15 minutes. The +12V can be supplied externally, or is available on J103
pins 7 and 4 and on J104 pins 7 and 4.
Tally Contact OPEN
= Hold
Tally Contact CLOSED = Forward Message
Figure 4.26-1. Tally Input External Biasing
4.27
Menu Item 24. SET ONE-BUTTON WEEKLY TEST OPTION
This menu item enables a One-Button Required Weekly Test to be transmitted without password protection. It also enables a
One-Button Weekly Test from EAS 941A Remote Control/Status Modules connected to the EAS911+.
4-14
Press ENTER while 24. SET ONE-BUTTON WEEKLY TEST OPTION is displayed on the LCD Screen. The LCD Screen
will display FAST RWT: YES (NO). Use the arrow keys to select Yes or No, then press ENTER to accept. See section 6.2.2
for details on sending the Required Weekly Test.
If YES is selected, the LCD Screen will display ASSIGN RWT FIPS. The default FIPS is 000000 UNITED STATES. If no
other FIPS codes are desired to be transmitted with the One-Button Weekly Test Option, press EXIT to return to the Setup
Menu.
If other FIPS codes are desired, press ENTER when ASSIGN RWT FIPS is displayed. The Station FIPS can now b e replaced
by a list of FIPS codes by using the numeric keys to enter the new FIPS codes. If the Station FIPS is one of the desired FIPS, it
must be entered manually at this time. When a FIPS entry is complete, press ENTER to accept. When all FIPS codes have
been entered, press EXIT to return to the ASSIGN RWT FIPS display.
To verify the FIPS entries use the ∆ or ∇ key to display VERIFY RWT FIPS, press ENTER. Use arrow keys to display the
other FIPS codes that were assigned. When verification is completed, press EXIT twice to return to the Setup Menu
For the Cable Version of the EAS911+:
Press the SUBDIVISION key.
ZONE: ♦
code appears on the LCD, when code is ALL or 1 to 16.
Use the arrow keys (∆ ∇) to scroll through the list of 16 zones.
Select a zone for encoding by pressing the ENTER key. The presence of the ♦ indicates that the zone is
selected. Pressing the ENTER key will toggle the diamond (♦) to change the status of each zone
Press EXIT to confirm and end.
4.28
Menu Item 25. SET ALERT TIMEOUT
Press ENTER while 25. SET ALERT TIMEOUT is displayed on the LCD. The LCD will display 2 MINUTES. Use the
arrow keys to select the desired Alert Timeout from 2 to 15 minutes, then press ENTER to accept. The Alert Timeout is used
to terminate an alert sequence that did not conclude with a proper EOM (End of Message).
4.29
Menu Item 26. SET ONE-BUTTON MANUAL FORWARD
Press ENTER while 26. SET ONE-BUTTON MANUAL FORWARD is diplayed on the LCD. The LCD will display FAST
FWD: YES (NO). Use the arrow keys to select YES or NO, then press ENTER to accept. See section 6.4.5 for details on
manually forwarding messages. CAUTION: One-Button Manual Forward bypasses password protection. This menu item also
enables a One-Button Manual Forward from EAS 941A Remote Control/Status Modules connected to the EAS911+.
4.30
Menu Item 27. ENABLE C.G. TEXT FOR RWT
This menu item allows the user to enable or disable the text output to an external character generator for the Required Weekly
Test.
Press ENTER while 27. ENABLE C.G. TEXT FOR RWT is displayed on the LCD Screen. RWT CG: NO will be
displayed. Use the ∆ or ∇ key to select RWT CG:YES if desired. Press ENTER when the desired setting is displayed.
4.31
Menu Item 28. SET AUTO MODE TIMER
This menu item allows the user to program the EAS911+ to automatically switch between AUTO and MANUAL mode at
selected times.
Press ENTER while 28. SET AUTO MODE TIMER is displayed on the LCD Screen. AUTO MODE: OFF will be
displayed. Use the ∆ or ∇ key to select AUTO MODE: ON if desired. Press ENTER when the desired setting is
displayed.
If AUTO MODE: ON is selected, SET AUTO ON will be displayed next. Press ENTER to allow entry of time to switch
AUTO mode ON. AUTO ON: 00:00 will be displayed. Use the ∆ and ∇ keys to select the hour, then press ENTER. Use
the ∆ and ∇ keys again to select the minute, then press ENTER. SET AUTO ON will now be displayed. Use the ∆ and
∇ keys to display SET AUTO OFF and press ENTER to enter the time to switch AUTO mode OFF. AUTO OFF: 00:00
will be displayed. Use the ∆ and ∇ keys to select the hour, then press ENTER. Use the ∆ and ∇ keys again to select the
minute, then press ENTER. SET AUTO OFF will now be displayed. Press EXIT to return to the Setup Menu.
4-15
The AUTO/MANUAL mode can still be set manually from the front panel. However, if the Auto Mode Timer is enabled, it
will override the mode at the first occurrence of the ON or OFF time. If the ON time is set equal to the OFF time, the Auto
Mode Timer will have no effect on the mode.
4.32
Menu Item 29. RECORD ALERT VOICE MESSAGE
An alert voice message may be prerecorded for later playback with the next manually encoded message. To record the
announcement, the Voice Recorder must be enabled. Connect the audio source to the Channel 1 (CH1) audio input of J102 on
the EAS911+ rear panel. The maximum announcement duration is 2 minutes. This recording will be overwritten by the next
EAS voice message.
Press ENTER while 29. RECORD ALERT VOICE MESSAGE is displayed on the LCD Screen.
The LCD Screen will display a bar graph of the signal level on CH1. The audio from CH1 will be heard through the
speaker. Use the bar graph to adjust the input signal level. Press ENTER to begin recording. The LCD Screen will display
the elapsed duration as the announcement is recorded.
EXAMPLE:
RECORDING: 00:01
Press EXIT to terminate recording. After the voice message has been recorded, it will automatically be replayed. Press
EXIT to end.
4.33
Menu Item 30. VERIFY ALERT VOICE MESSAGE
The prerecorded alert voice message can be played back from the Voice Recorder. The Voice Recorder must be enabled, and a
voice message must have been recorded previously.
Press ENTER while 30. VERIFY ALERT VOICE MESSAGE is displayed on the LCD Screen.
The SPKR LED will light to allow adjustment of speaker volume.
The LCD Screen will display: VOICE MSG: 02:00 (or the length of the recorded announcement in seconds).
The speaker will play back the pre-recorded voice message.
The LCD Screen will count down as the message is replayed. Press EXIT to interrupt playback and return to the Setup
Menu.
4.34
Menu Item 31. SET RANDOM REQUIRED WEEKLY TEST
This menu item allows a user to program an automatic random One-button Weekly Test (see section 4.27). The test will occur
on a random day of the week and at a random time between the programmed Earliest and Latest times. The time duration is
fixed at 15 minutes. Location FIPS Codes used will be those programmed in Setup Menu 24. SET ONE-BUTTON WEEKLY
TEST OPTION (see section 4.27).
Press ENTER while 31. SET RANDOM REQUIRED WEEKLY TEST is displayed on the LCD screen. RANDOM
RWT: OFF will be displayed. Use the arrow keys to select RANDOM RWT: ON if desired. Press ENTER when the
desired setting is displayed.
If RANDOM RWT: ON is selected, SET EARLY TIME will be displayed. Press ENTER to allow entry of the Earliest
time. EARLIEST: 00:00 will be displayed with the Hours digits flashing. Use the arrow keys to set the Earliest Hour,
then press ENTER. The Minutes digits will flash. Use the arrow keys to set the minutes, and press ENTER. SET
LATEST TIME will be displayed on the LCD screen. Press ENTER to allow entry of the Latest time. LATEST: 00:00
will be displayed with the Hours digits flashing. Use the arrow keys to set the Latest Hour, then press ENTER. The
Minutes digits will flash. Use the arrow keys to set the minutes, and press ENTER. Press EXIT to return to the Setup
Menu. The initial RWT will be transmitted approximately 5 minutes after exiting, and then the Random RWT cycle will
begin.
4.35
Menu Item 32. SET TRANSMIT DELAY TIME
This menu item allows a user to program a delay time between closure of the On-Air Relay and the start of transmission of the
EAS header, voice or EOM audio. This delay is commonly referred to as transmitter key-up time.
Press ENTER while 32. SET TRANSMIT DELAY TIME is displayed on the LCD screen. DELAY 0.0 SEC will be
displayed on the LCD screen. Use the Arrow keys to select the delay time in 0.5 second increments. Press ENTER when
the desired delay is displayed. The maximum delay time is 10.0 seconds.
4-16
SECTION V
INSTALLATION
5.1
INTRODUCTION
This section describes the installation of the EAS911+ and its related options and equipment after it has been
programmed according to methods described in Section IV. The EAS911+ installation requires the Encoder output and
Decoder input level adjustment, as well as connecting the various optional and related equipment onto the EAS911+
Rear Panel.
Electrical ground for the EAS911+ is established through the AC power cord. If a more substantial technical ground is
available, it may be connected to the chassis box directly, using a short piece of braid. Proper grounding, good
engineering practice, and safety depend on the knowledge and care of the installing engineer.
The EAS911+ is designed to mount in a 19” rack or cabinet using (4) 12-24 pan head machine screws.
Mounting requirements: Size: 5.25”H x 19”W x 12”D Maximum. Weight: Approximately 12 lbs.
Power requirements: Input power: 117 VAC @ 60 Hz, 40 watts maximum, 3 Prong Power Cord - UL style SVT
Environmental requirements: 0°C to 50°C (32°F to 122°F).
General Hazards:
a.
Elevated Operating Ambient Temperature - If installed in a closed or multi-unit rack assembly, the operating
ambient temperature of the rack environment may be greater than room ambient. Therefore, consideration
should be given to installing the equipment in an environment compatible with the maximum rated ambient
temperature.
b.
Reduced Air Flow - Installation of the equipment in a rack should be such that the amount of airflow required
for safe operation of the equipment is not compromised.
c.
Mechanical Loading - Mounting of the equipment in a rack should be such that a hazardous condition is not
achieved due to uneven mechanical loading.
d.
Circuit Overloading - Consideration should be given to the connection of the equipment to the supply circuit
and the effect that overloading of the circuit might have on over-current protection and supply wiring. A
continuous AC source UPS is recommended.
e.
Reliable Earthing - Reliable earthing of rack-mounted equipment should be maintained. Particular attention
should be given to supply connections other than direct connections to the branch circuit (e.g., power strip use)
5.2
ENCODER AUDIO OUTPUT LEVEL ADJUSTMENT
FCC regulations state that Broadcast stations are responsible for ensuring that the equipment for generating the EAS
codes and the Attention Signal can modulate a broadcast station transmitter at no less than 80% of main channel
modulation. Measured at peak modulation levels, each of the Attention Signal tones should modulate the transmitter at
not less than 40%. These two calibrated modulation levels should have values that are within 1 dB of each other.
This procedure sets the proper signal level at the audio output of the EAS911+ ENCODER. Connections are made to the
AUDIO OUTPUT.
1.
Enter the primary password. The EVENT keys will begin flashing and the TOUCH SCREEN DISPLAY
Screen will display SELECT EVENT.
2.
Press the ENTER key in the Decoder section of the front panel. The TOUCH SCREEN DISPLAY Screen will
display OPERATION MENU briefly and then display 1. REVIEW RECEIVED MESSAGES.
3.
Use the Arrow (▲▼) keys to scroll through the Operations Menu to 5. SET OUTPUT LEVEL: ON-AIR
RELAY OPEN.
Press the ENTER key to select. The TOUCH SCREEN DISPLAY Screen will display LEVEL: 0.5 Vp-p
Adjust the audio output level by using the Arrow keys while reading the level indication on the TOUCH
SCREEN DISPLAY Screen. As the Arrow keys are pressed, the output level will be incremented or
decremented in 0.1 Volt steps Press ENTER to accept an indicated output. Set the output to comply with the
modulation percentage stated above.
5-1
5.3
DECODER AUDIO INPUT LEVEL ADJUSTMENT
This procedure adjusts the signal level to the EAS DECODER Decoder. Connections are made with the supplied mating
connectors. The pins are numbered from left to right when viewing the back panel.
Description
CH6 + AUDIO INPUT
CH6 SHIELD GROUND
CH6 - AUDIO INPUT
CH5 + AUDIO INPUT
CH5 SHIELD GROUND
CH5- AUDIO INPUT
CH4 + AUDIO INPUT
CH4 SHIELD GROUND
CH4 - AUDIO INPUT
CH3 + AUDIO INPUT
CH3 SHIELD GROUND
CH3- AUDIO INPUT
CH2 + AUDIO INPUT
CH2 SHIELD GROUND
CH2 - AUDIO INPUT
CH1 + AUDIO INPUT
CH1 SHIELD GROUND
CH1- AUDIO INPUT
Note:
The Decoder input can accommodate signals at levels of 0.5 Vp-p to 2 Vp-p. It is
desirable to keep the Decoder input level at 1.5 Vp-p to utilize its full dynamic range.
5.5
1.
Connect the received audio source to Channel 1 (+ to +, - to -, GND to GND).
2.
Press the SPKR key to activate the speaker on Channel 1. The TOUCH SCREEN DISPLAY Screen will
show the channel number followed by the audio signal level in bar chart form.
3.
Observe the incoming level of the source.
4.
If necessary, adjust the monitoring source output level for proper indication. Do not allow audio level to
exceed 2 V on peaks.
5.
Each time the SPKR key is pressed, it advances to the next channel in sequence. The speaker mutes after
the last channel is exited. The SPKR LED illuminates when the speaker is active.
6.
Repeat Steps 1 through 4 for Channels 2, 3, 4, 5, and 6 .
DIGITAL INTERFACE (RS-232)
The Digital Interface Port COM5 is the digital data input required by 11.33(a)(1) of the FCC Rules. It is mandated to be
RS-232C with standard protocol and 1200 baud rate. Although it could be used, as described by the FCC, for Radio
Broadcast Data System (RBDS), NWR, satellite, public switched telephone network, or other sources that may in future
applications use EAS protocol, no specific standard is defined. Therefore, this interface connector is reserved for future
expansion.
5.6
DIGITAL INTERFACE (RS-232)
The Digital Interface Port COM6 is the digital data output required by 11.32(a)(3) of the FCC Rules. It is mandated to
be for data messages (RS-232C with standard protocol and 1200 baud rate) for future applications.
5-2
5.7
DIGITAL INTERFACE (RS-485)
This is a two-conductor balanced, twisted-pair interface to the TFT EAS 941A Remote Control/Status Module. It
operates at 1200 bps half duplex and can drive up to 16 remote EAS 941A Modules. Maximum wiring distance is 2000
feet, and ground-shielded twisted-pair 24 AWG or heavier is requested.
5.8
THE ON-AIR RELAY
The On-Air Relay operates (closes) when an alert is generated by the Encoder, or when the EAS Decoder is in Auto
mode and a valid and "tagged" EAS message is received, or when a message is manually forwarded. The relay provides
a single set of dry contacts, rated 3A, 250 VAC. Contacts are Normally Open. The relay can be used to control the TFT
Model 940A Program/Transmitter Interrupt unit.
The On-Air Relay releases when an EOM tone is completed. The relay contacts are available at rear panel connector.
5.9
THE ALERT RELAY
The Alert Relay operates (closes) when a valid EAS header is detected by the Decoder. The relay provides a single set of
dry contacts, rated 3 A, 250 VAC. Contacts are Normally Open. When the relay operates, it remains closed until reset or
upon detection of an EOM. If no EOM is detected the relay will reset after the timeout period programmed in Setup
menu 25. SET ALERT TIMEOUT (see section 4.28) except during an EAN or EAT alert.
Note:
Receipt of an EAN alert defeats the manual reset capability of the Alert Relay. When an
EAN alert is received, the relay will reset only upon detection of an EOM.
The Alert Relay contacts are available at rear panel connector.
5.11
SPEAKER INHIBIT
This 2 pin connector is provided to inhibit (mute) the speaker when desired. A normally open switch or relay can be
connected. When the contacts are open, the EAS911+ the speaker will operate normally. When the contacts are closed,
the speaker will be muted. Incoming messages will continue to be logged and can be printed at the operator's
convenience using an external printer or storage device connected to the front panel or rear panel USB port.
5.15 MOVING MESSAGE SIGNS
Moving Message Signs can be connected to Sign RS232 connector on the rear of the EAS911+ The RS-232 twisted-pair drives
remote Moving Message Signs via serial data.
5-3
SECTION VI
OPERATION
6.1
INTRODUCTION
This section describes EAS911+ operating procedures. The encoding of events and locations, and the transmission of alerts and
required tests are described in detail. EAS Event Codes are described in FCC Part 11.31(e) and in Appendix F of this User
Guide. Federal Information Processing System (FIPS) codes used to designate geographical locations are included in Appendix
C of this User Guide.
A Primary, r Operator, password must be entered into the EAS911+ to originate an EAS alert. A Secondary, or Setup,
Password is required, in addition, to set and/or modify programmed operating parameters. As shipped from the factory, the
EAS911+ has Primary and Secondary passwords programmed to default values of “9-1-1” and “9-1-2”, respectively.
EAS 911+ CAP-TO-EAS AND EAS OPERATION
1.
INSTALLATION – REAR PANEL CONNECTIONS
1.1
POWER CONNECTION
Connect the EAS 911+ to a 120 VAC power source.
2.0
NETWORK CONNECTION
Connect the Ethernet 0 port to a TCP/IP (Internet) network with access to a designated CAP Server using a CAT5 to
RJ45 cable.
After the unit is plugged in, a boot-up process of approximately one minute occurs followed by the touch screen
displaying the default DECODER screen with the DECODER tab highlighted in yellow at the top left of the touch
screen. The various tabs at the top of the touch screen turn yellow when touched and access different screens that are
briefly explained below.
DECODER tab
Accesses the screen that displays all the decoder operation functions including valid
decoded CAP messages that match the FIPS Include list.
ENCODER tab
Accesses the screen for transmitting an EAS message.
CAP tab
Accesses the screen that displays a real-time log of the last 100 CAP message
received regardless if they match the FIPS Include list or not.
AUDIO INPUTS tab
Displays a full-scale screen view of the 6 audio input channel levels on bar graphs.
Each channel may be heard on the speaker separately.
INFO tab
Gives information about the SYSTEM as a whole, the EAS SERVER, and the CAP
SERVER.
WARNINGS tab
Displays information messages should the unit not have received or transmitted a
weekly or monthly test within eight days.
6-1
2.1
PERMANENT PORTION OF THE TOUCH SCREEN
The touch screen is composed of a permanent portion that essentially never changes. It includes the bottom row and the
right edge column of the touch screen. The touch screen is also composed of the various tabs at the top of the screen,
which bring up various screens that were discussed is Section 2.
The permanent portion of the touch screen includes the bottom row and a right edge column.
2.1.1
The bottom row includes a yellow window box and the CANCEL key. The yellow window box normally
displays the date and time but can also display other messages about the status of the unit. The CANCEL key is used to
cancel a particular function and return to the default DECODER tab.
2.1.2
The right column contains the SPEAKER up and down keys to adjust the speaker volume, the SPEAKER
MUTE/ UNMUTED key, SETUP and OPERATION CONFIGURATION keys to gain access the the SETUP and
OPERATION mode programming via password protection, and the ON-AIR and ALERT RELAYS status.
3.
OPERATING MODE DETAILS
3.1
DECODER TAB
This tab accesses the screen that displays all the decoder operation functions. It includes the following:
MODE key, which toggles between the manual forward and the automatic forward modes via password protection.
AUDIO INPUTS mini bargraphs displays mini bargraphs for each of the 6 Audio Inputs channels. The CAP indicator
briefly illuminates for incoming CAP messages, and the RX-D indicator briefly illuminates for incoming messages on
the COM 5 1200-baud data channel.
The MESSAGE WAITING key flashes for each valid incoming EAS message. Touch the flashing MESSAGE
WAITING key to acknowledge the incoming message and extinguish the key and to proceed with other DECODER
functions.
The RX LOG window shows the last valid or duplicate alert decoded on the audio input or data channels. Only valid
CAP messages, which match the FIPS Include list, are posted in the DECODER RX LOG window.
The REVIEW RX LOG keys include the NEWEST, NEWER, and the OLDER keys for accessing the last 10 received
EAS messages be they valid, duplicate, or expired.
The PRINT key allows printing of the message displayed in the RX LOG window to an external printer via the front or
rear USB port.
The VOICE MSG key permits the previewing of the voice message for the alert shown in the RX LOG. The EAS 911+
is capable of recording and storing ten distinct voice messages, one for each of the ten alerts in the RX LOG messages.
The FORWARD key permits the manual forwarding, with password protection, or one-button forwarding, without
password protection, of a valid alert so long as the time duration has not expired.
6-2
3.2
CAP TAB
This tab accesses the screen that displays a real-time log of the last 100 CAP messages received from one or more
URL’s selected regardless if they match the FIPS Include list or not. It also includes the following:
The CAP LOG window shows the last CAP message decoded. Lengthy messages may be accessed by using the up and
down scroll keys.
The REVIEW CAP LOG keys include the NEWEST, NEWER, and the OLDER keys for accessing the last 100 received
CAP messages received.
The PRINT key allows printing of the CAP message displayed in the CAP LOG window to an external printer via the
front or rear USB port.
The VOICE MSG key permits the previewing of the voice message for the alert shown in the CAP LOG window. If the
Enable Text-to-Speech On Forwarded Messages function is enabled, a text-to-speech conversion of approximately one
minute will take place if the VOICE MSG key is touched to preview a message before sending it; otherwise, the text-tospeech conversion will take place just before the header is transmitted for manual forwarding or at the beginning of an
auto forward.
The FORWARD key permits the manual forwarding, with password protection, or one-button forwarding, without
password protection, of a valid alert so long as the time duration has not expired.
The VIEW XML SOURCE key if touched permits viewing of the currently displayed CAP message XML source file.
4.0
CAP SETUP MODE PROGRAMMING
4.1
ENTERING THE SETUP MODE
With the unit showing any screen, touch the SETUP key in the CONFIGURE box in the lower right side of the touch
screen. Enter password “9-1-,2” and then touch ENTER. If successful the unit emits a high 2 kHz confirmation tone
with the speaker unmuted and set to a non-zero speaker level. And unsuccessful password entry is followed by a low
400 Hz error tone.
The SETUP mode opens with the top left System and Time tabs highlighted in yellow.
NOTE:
At any time during SETUP mode programming, touching the OK key at the bottom of the touch
screen enters the particular tabs entry or entries into memory and then exits the Setup Mode the unit returns to
the default DECODER screen.
If multiple SETUP items from different tabs are to be programmed, it is recommended that all the items be
programmed tab by tab before touching the OK key.
Once the OK key has been touched, all the programmed settings from all the different tabs will be entered into memory
and the Setup Mode exited with the unit returning to the default DECODER screen.
4.2
DATE AND TIME PROGRAMMING
While in the SETUP mode, verify the System and the Time tabs are highlighted in yellow at the top left corner of the
touch screen. If they are not, touch each of these tabs to bring up the time setting screen. Enter the date and time in the
various entry boxes using the up and down keys. When programming is completed touch the SET DATE TIME key.
DO NOT TOUCH THE OK KEY AT THE BOTTOM OF THE TOUCH SCREEN.
6-3
4.3
TIME ZONE PROGRAMMING
While in the SETUP mode, touch the System tab and then the Time Zone tab at the top left corner of the touch screen so
that they are both highlighted in yellow. Select the correct time zone setting by touching the up and down keys. When
the correct time zone is displayed in the window, touch the SET TIME ZONE key. DO NOT TOUCH THE OK KEY
AT THE BOTTOM OF THE TOUCH SCREEN.
4.4
CAP PROGRAMMING
4.4.1
CAP NETWORK PROGRAMMING
While in the SETUP mode, touch the CAP tab at the lower left side of the touch screen and then the Network tab at the
top left side of the touch screen so that they are both highlighted in yellow. The default setting is DHCP, where the EAS
911+ is automatically assigned with a network address upon connection.
To set a Static IP Address, touch the Use Static IP Address key to fill in the circle with a dot.
To edit the Address, touch the Edit key and enter the static IP address in each of the four numbers in the address. After
each number is properly entered, touch the Done key below the number; otherwise, touch the Edit key above the
number. After all four numbers have been correctly entered, touch the OK key at the top portion of the touch screen and
not the OK key at the bottom of the touch screen, otherwise touch CANCEL at the top portion of the touch screen
and not the CANCEL at the bottom portion of the touch screen.
To edit the Netmask, Gateway, and DNS, follow the same procedure stated above for the Address.
4.4.2
CAP URL PROGRAMMING
While in the SETUP mode, touch the CAP tab at the lower left side of the touch screen and then the URL tab at the
topside of the touch screen so that they are both highlighted in yellow.
The EAS 911+ provides up to three CAP server poll URLs. Each URL can be enabled or disabled. URL #1 FEMA
IPAWS address can only be enabled or disabled and not changed, while URLs #2 and #3 addresses can be both enabled
and disabled and changed.
To enable or a particular URL, touch the “Poll this URL” key to put a check mark in the box and enable the URL. To
disable the URL, touch the “Poll this URL” key with a check mark to remove it and disable the URL.
To edit URLs #2 or #3 addresses, touch the Edit key and enter the address on the keyboard. When the desired address
has been correctly entered, touch the Done key.
4.4.3
CAP MISC TAB PROGRAMMING (SERVER POLL INTERVAL, ENABLE TEXT- TO-SPEECH, CAP
ALERT HTTP PROXY)
While in the SETUP mode, touch the CAP tab at the lower left side of the touch screen and then the Misc tab at the
topside of the touch screen so that they are both highlighted in yellow.
To set the Server Poll Interval use the nearby up and down keys. The range is 60 seconds to 900 seconds increments of
60 seconds.
The Enable Text-to-Speech On Forwarded Messages function can be enabled or disabled by touching the key. A check
mark in the left side box means the function is enabled. No check mark means this function is not enabled.
6-4
To use a CAP Alert http Proxy, touch the Use Proxy box so that a check mark appears. The web site address for the proxy
can be entered by touching the Edit key and using the keyboard to enter the address. When the desired address has been
correctly entered, touch the Done key.
4.4.4
CAP FIPS INCLUDE LIST
Only the valid CAP messages whose FIPS Codes match those programmed in the FIPS Include List will be eligible for
forwarding and posted in the DECODER RX LOG. All CAP messages, including those that do not match the FIPS Include
list, will be posted in the general CAP log accessed under the CAP tab in the regular operating mode. The FIPS Include List
can only be programmed for a maximum of 100 FIPS codes.
While in the SETUP mode, touch the CAP tab at the lower left side of the touch screen and then the FIPS Include tab at the
topside of the touch screen so that they are both highlighted in yellow.
To enter FIPS code in the FIPS Include list, first touch the Select State key. Use the up and down keys to select a state and
then touch the Set State key when done.
Next, use the up and down keys to select a FIPS code. If a subdivision of the FIPS code shown is needed touch the Location
Subdivision up and down keys to select a location subdivision. Touch the Add key to add a FIPS code to the list. To add
multiple FIPS codes continue in the same process.
To remove a FIPS, touch the Remove FIPS key. This brings up a sub-menu. Touch the Remove or the Remove All key as
needed. If done removing FIPS codes and done programming the FIPS Include list, touch the OK key. If not, touch the Add
key to return to the FIPS Include programming.
6-5
SECTION VII
Theory of Operation
7.1
GENERAL DESCRIPTION AND PURPOSE
The EAS911+ is a rack mount unit that consists of a computer with Linux-based operating software and peripherals for
digital and analog interface. The software programming resident in the EAS911+ performs all the tasks necessary for
FCC Part 11 and FEMA Compliance.
The EAS911+ is a combined Emergency Alert System (EAS) Encoder and Decoder and CAP Receiver (Decoder) that
enables broadcasters, cablecasters, and emergency managers to receive, store, forward, and originate Emergency Alert
Messages as required by the FCC’s EAS Rules. By using the EAS digital protocol prescribed by the FCC, the EAS911+
can function as a sentinel to alert operators to the receipt of emergency messages. Forwarding of only certain messages
with a minimum of operator intervention can be achieved selectively, simply, and automatically.
The EAS911+ has two operating modes: automatic and manual. In automatic mode, only those messages which meet
specific criteria are forwarded to the transmitter. With the exception of the required national level events, only messages
“tagged” by management are allowed to interrupt programming. For minimal or unattended operation, the EAS911+
can perform all the critical emergency alert functions in automatic mode with the optional voice recorder option without
operator assistance. For manual mode, no messages are forwarded, except for required national level messages, unless
sent by an operator. All incoming messages are recorded, and their header information is stored and available for review
or subsequent manual forwarding.
The digital voice message recording makes an incoming audio message, of up to two minutes, always available for the
operator’s immediate review. The operator can then decide whether to forward the last message received after review of
the complete header and voice message. With the EAS911+ voice recorder it is not necessary for the operator to
transcribe or remember text. A touch screen display gives the operator instant access to the last ten messages either
received or sent.
Six audio inputs and two RS-232 data input are standard on the EAS911+ to connect to receivers for the two required
monitoring assignments of the EAS911+.
A single audio output connects to external audio switching and distribution systems or to an optional TFT EAS 940A
transmitter/program interrupt unit. This optional interrupt unit provides four balanced, isolated input and output
channels that are switched to a combined common signal during an emergency message transmission. The common
audio output provided by the EAS911+ contains all the Header, Attention Signal and EOM codes in proper EAS format
for emergency alerting.
TFT, Inc.
1953 Concourse Drive
San Jose, CA 95131-1731
Tel: (408) 943-9323 Fax: (408) 943-9218
Email: techsupport@TFTInc.com
7-1
SECTION VIII
MAINTENANCE AND REPAIR
8.1
INTRODUCTION
The EAS911+ has no moving parts or components that require routine replacement. It requires only minor audio
adjustment, which will be described later in this section.
8.2
TOOL AND TEST EQUIPMENT REQUIREMENTS
The following tools and equipment are required for EAS911+ maintenance:
• Hand Tools
• Digital Voltmeter
• Oscilloscope
• Audio generator
8.3
ROUTINE MAINTENANCE
The EAS911+ should require no routine maintenance. As equipment and systems external to the EAS911+
change, audio level adjustments may be necessary.
8.3.1
Calibration
The 911+ EAS-CAP does not require routine calibration.
8.3.2
Audio Levels
The EAS911+ Encoder Output Audio Level and the Decoder Input Audio Level can be adjusted periodically as
described below.
8.3.2.1
Encoder Audio Output Level Adjustment
This procedure sets the proper signal level at the audio output of the Encoder portion of the EAS911+ (J101).
Proceed as follows:
1.
To access the Operation Menu, enter the Primary Password, then press ENTER.
The TOUCH SCREEN DISPLAY will display OPERATION MENU briefly, then 1. REVIEW RECEIVED
MESSAGES.
2.
Use the up/down arrow keys (∆∇) to scroll to 6. Set Output Level: On-Air Relay Open. Press the ENTER
key to activate the displayed menu selection. The TOUCH SCREEN DISPLAY will display the output audio
level.
3.
Adjust the audio output level by using the up/down arrow keys while reading the level indication on the
TOUCH SCREEN DISPLAY display. As ∆∇ keys are pressed, the audio output level will be incremented or
decremented in 0.1 volt steps. Press ENTER to accept an indicated output. The output should be set to comply
with the modulation percentage stated above. A level of 2.2 V p-p corresponds to 0 dBm.
4.
The two tones of the Attention Signal can be accessed individually by using the ∆ TIME ∆∇ arrows. The 960
Hz tone, both, or the 853 Hz tone can be selected.
5.
Press EXIT twice to return to the Ready mode.
8.3.2.2
Decoder Audio Input Level Adjustment
1.
Connect the monitoring source to the audio input CH1.
2.
Press the SPKR key to activate the speaker on Channel 1. The TOUCH SCREEN DISPLAY displays the
channel number followed by the audio signal level in bar chart form.
8-1
Note:
The Decoder input can accommodate signals at levels of 0.7 Vp-p to 2 Vp-p. It is desirable to keep the
Decoder input at 1.5 Vp-p to utilize its full dynamic range.
3.
Observe the incoming level of the source.
4.
If necessary, adjust the monitoring source output level for proper indication. Do not allow audio level to exceed
2 Vp-p on peaks.
5.
Each time the SPKR key is pressed it advances to the next channel in sequence. The speaker mutes after the last
channel is exited. The SPKR key illuminates when the speaker is active.
6.
Repeat Steps 1 through 4 for Channel 2.
7.
Repeat Steps 1 through 4 for each of the remaining Audio channels.
8.5
DIAGNOSTICS AND REPAIR
Some general (and very important) observations on repair:
1.
The EAS911+ series of equipment uses static sensitive components. ESD (Electrostatic Discharge) precautions
must therefore be observed during any attempted repairs. This is extremely important.
2.
The EAS911+ breaks down into subassemblies and, in general, subassembly replacement is best maintenance
philosophy.
8.7
TROUBLESHOOTING
Most of the EAS911+ functions can be troubleshot by performing the Encoder to Decoder self test as described
below. This self-test will check both the operation of the Encoder and one Decoder Audio Input channel. This test
may be repeated for any or all of the other Decoder Audio Input channels if desired.
Connect a XLR out to 3-pin AUDIO INPUT cable between Rear Panel J101 Audio Out and J102 CH1 Audio Input.
Press front panel keys in the following order:
Press PASSWORD
The TOUCH SCREEN DISPLAY will read PASSWORD? And the LOCATION(S)
numeric keys will illuminate.
Press 9,1,1
The TOUCH SCREEN DISPLAY will read SELECT EVENT and the EVENT keys
will flash.
(or Primary Password)
Press WEEKLY TEST
The TOUCH SCREEN DISPLAY will scroll RWT A REQUIRED WEEKLY TEST
and the CONFIRM key will flash.
Press EVENT CONFIRM The TOUCH SCREEN DISPLAY will read EVENT DURATION before changing to
read 00 HRS 15 MIN and the READY key will flash.
Press READY
The TOUCH SCREEN DISPLAY will read SEND HEADER and the SEND HDR key
will flash.
Press SEND HDR
The TOUCH SCREEN DISPLAY will read SENDING HEADER and the Header
Tones will be heard through the speaker. The printer will print the Station Transmit
Log. After the Header Tones are sent the TOUCH SCREEN DISPLAY will scroll the
received Alert Message text and the SEND HDR, SEND EOM, and MSG WAITING
keys will flash. The printer will print the Station Receive Log.
8-2
8.8
Press SEND EOM
The EOM Tones will be heard through the speaker and the printer will print EOM
Received log. The TOUCH SCREEN DISPLAY will continue scrolling the received
message and the MSG WAITING key will continue flashing.
Press MSG WAITING
The TOUCH SCREEN DISPLAY will read Date/Time and the unit will be returned to
the Banner/Ready Mode.
TFT CUSTOMER SERVICE DEPARTMENT
TFT emergency service is available 24 hours a day if your station is off the air. Please call us if you need
assistance with any TFT products.
TFT, Inc.
1953 Concourse Drive
San Jose, CA 95131-1708
Telephone: (408) 943-9323, Fax: (408) 943-9218
Email: techsupport@TFTInc.com
8-3
APPENDIX A
ENGINEERING DRAWINGS
FIG.
TITLE
REV.
1.
EAS911+ System Block Diagram ............................................................
2.
EAS911+ System Bill of Material………………………………………..
3.
I/O Interface Board Block Diagram and Schematic .................................
4.
I/O Interface Board Assembly .................................................................
5.
Mother Board Block Diagram Layout and Specification……………….
APPENDIX B
(Not used)
J111
J102
CH. 1
Audio
Audio
I/F
Voice
Recorder
Audio
Switch
J102
CH. 2
Audio
Audio
I/F
Sheet 1 of
Schematic
(6601-4030)
CNTL
Sheet 2 of
Schematic
(6601-4030)
Speaker
Driver
CNTL
Audio
Switch
J100
SPKR
Audio
Driver
J101 XLR Audio
Output
Relay
Driver
J106 On-Air
Relay
Relay
Driver
J107 Alert
Relay
RS232
I/F
J104
RS485
I/F
J105
Printer
I/F
J121
CNTL
Audio
Switch
CH.3 - CH.6 J112
Audio
Expdr
VOL
CNTL
CNTL
Codec
(X2)
CNTL
EPROM
(256KB)
SRAM
(64KB)
60Hz Clock
Reference
J108
Printer/Speaker
Inhibit
J109
RS232
I/F
FPGA
BUS
J103
RS232
DSP
DSP
R. Time
Clock
W.D.
Timer
Encoder
Key Bd
Remote
S/C
Board
CNTL
J128
Output
Ports
Sheet 3 of
Schematic
(6601-4030)
Decoder J126
Common
Key Bd
RS232
Printer
J113
4-port
COM
Expdr
J127
LCD
Displays
MAIN BOARD
EAS911+ SYSTEM BLOCK DIAGRAM
6600-2840 Rev A
Figure 1
Model EAS911+ System Bill of Meterial
Item No
10
11
12
13
14
15
16
12
13
14
15
16
17
18
19
20
21
22
Rev A
Description
Power Supply FSP Group Inc Model FSP200‐50PLA
EAS911+ Mother Board Assemblyy
EAS911+ In/Out board PCB Assembly
Solid State Drive OCE Technology Sata II 2.5 "
Touch screen Display 7 inches OSD P/NOSD521V10‐1
Fan 3 inches 12V/140ma Elina HDF 6025L
Speaker 4 Ohms 3 Watts P/N GF0778BX4
EAS911+ Front panel assembly
EAS911+ Rear panel assembly
EAS911+ Chassis Assembly
EAS911+ Top cover
EAS911+Speaker Bracket
EAS911+Touch Screen Display Bracket
Cable Harness Assembly ‐ PS to Mother Bd and I/O Bd
Cable Assembly ‐ USB to USB extenision 1.5 ft
Cable Assembly ‐ 3.5mm male to 3.5 male 2 ft
Cable Assembly ‐ speaker terminal to mini molex female 2.5 ft
Cable Assembly ‐ D connector 9 pins to D connector 9 pins 2 ft
Cable Assembly ‐ Ribbon DB( to Molex header 9 inches
Cable Assembly ‐ D connector 25 pins to Molex header 26 AWG
Cable Assembly‐ SATA Cable SSD to mother board 1 ft
Cable Assembly‐ RS485 DB9 Femaleto DB9 header 2 ft
Cable Assembly‐ Twist pair yel/wht 22 Awg 15 inches
Cable Assembly‐ Twist pair red/wht 22 Awg 15 inches
Cable Assembly‐Twist pair grn/grn 22 Awg 15 inches
Cable Assembly‐ Cat 5 RJ11 to RJ11
Cable Assembly‐ Touch screen to mother board 2 ft
Qty
Front Panel Speaker
5/12 VDC
I/O Board Clocks:
Y1: 27 MHz
Y2: 12 MHz
DB25 Female
ATX Power
Supply
ATX Power
IO Board Clocks
27 MHz
12 MHz
Motherboard Clocks:
Y1: 14.31818 MHz
Y2: 32.768 kHz
Y3: 14.318 MHz
X1: 25 MHz
X2: 25 MHz
Motherboard IO
Audio I/O
0 - 20 kHz
USB 4
Front Panel
USB 5
Rear Panel
RS232
Com 3
Rear Panel
RS232/485
Com 1
Rear Panel
RS232
Com2
Rear Panel
RS232
Com 5
Rear Panel
RS232
Com 4
Rear Panel
Parallel Port
System Power
Switch
Microphone
Front/Rear
RJ45
Ethernet 1
RJ45
Ethernet 2
Chassis Fan
Power
4
FB23 C258
R399
C6
C5
R352
C203
R351
FB21
C193
FB39
C211
C13
R372
J35
R54
R48
U3
R369
C224
R371
FB27
C231
C214
FB40
C232
C217
R363
R47
R74
C54
C47
C43
C40
R61
R71
R59
R46
R401
C50
C49
R392
C244
R70
R62
U6
R390
C245
R391
FB33
C252
J36
R84
R78
U5
R389
R388
FB41
C253
C235
C238
R383
C56
C57
R77
C62
C65
R89
R76
C59
1600-4173
PART NUMBER:
REV:
www.adspcb.com
Melbourne, FL 32901
C34
C35
C234
C216
TP52
R387 R382
C255
C237
R393
R394
R397
R395
R396
D1
Q1
J43
10
R156
R155
LS5
6608-4173
ASSEMBLY#
LS4
1600-4173
PCB#
D2
Q2
J44
10
REV
REV
R158
R157
R131
C109
C115
R150
R148
R151
R137
R135
U12
R132
R133
R153
R136
R138
R129
C101
C111
C99
J13
R139
R141
R145
R143
R140
U13
R142
U11
R126
R144
R128
C105
R125
R123
R146
R154
R152
U30
R149
C95
LS6
R188
R338
R179
10
R182
C128
J45
D3
Q3
R180
C127
C141
C133
R202
R201
R200
R199
R198
R197
R121
R181
C135
C149
R160
R159
C122
C123
R175
R176
C152
C150
C151
U18
R195 R190
R178
C130
Y1
R185
R196
25
R206
C156
C145
C148
C154
U17
R194
C138
C134
R184
FB20
LS16
R193
C140
C139
C136
13
Plotted: Jan 13 09:18:42 2012
Design: H:/project7/Vela/audio-io/1600-4173-revb-jan13.brd
R40
R32
U4
C246
C192
C94
C93
R171
R300
RN2
J53
R406
R407
R162
R161
J29
LS15
C120
RN1
14
R306
C169
J28
R314
U26
R404
R405
U31
D22
J46
R242
R303
D21
R301
R333
LS9
J39
U32
TP8
D31
R337
JP1
VELA
C27
C28
Q13
C223
R370
R368
R373
R377
FB35
R374
R375
R376
C236
R379
Y4
10
01-13-2012
R44
R400
C229
TP31
R367 R362
C240
COMPANY:
R17
C32
C25
C21
C18
R31
R41
R29
R16
C213
C225
C241
R163
DATE:
C196
R343
C12
C194
C195
FB29
R398
R164
J30
R24
R18
R349
C210
R354
R357
R355
U39
R166
10
U1
R10
R2
U2
R353
TP51
R356
R359
R172
Q12
C202
R348
R350
U36
TP30
R344
R341
C117
SILK SCREEN TOP
R14
C10
C3
R1
R11
C8
C226
R415
C209
R4
C208
R6
R345
C197
C4
C207
R8
R346
FB25
C200
R3
C11
R19
D39
R7
C1
C9
R13
C7
R9
R5
R15
FB26
C2
R22
C17
R12
R365
C218
C215
U37
TP10
R347 R342
C206
C205
R27
R361 R364
C212
C204
C14
C228
D40
R413
C230
R34
C257
C201
R20
R26
R30
R21
R36
U40
R38
TP72
R384
R411
C251
D34
R28
C15
R25
C16
R381
R339
R57
C249
D33
C20
R23
C22
C19
FB22
C30
C221
R33
C26
FB31
C222
R50
R56
R366
FB32
C39
R42
C24
R52
C227
C256
C233
R37
C23
C33
C36
R43
C29
R39
R35
R45
C31
R66
R385
C243
R386
C250
FB37
C247
R87
U38
R412
C248
D35
R60
C181
C112
Y3
C254
C104
C102
C103
U41
R49
R51
R53
C42
C183
D36
R58
C37
R55
C44
C41
C38
FB28
C52
R124
C219
R79
C242
R63
C48
R64
R68
D41
R67
C45
C55
FB38
C61
R82
C46
R72
R130
R147
C220
R173
Q14
R73
C51
R69
R65
R75
C53
R127
R331
J47
U33
R218
R216
TP9
D32
R336
R335
C100
R378
C184
C239
R80
R86
R90
RN3
U16
D37
R81
R83
C64
R186
D38
R88
C58
R85
C66
C63
C60
R177
C147
C137
R192
R187
R414
R203
Y2
C153
C198
R174
C144
C199
R168
R358
U19
R205
R169
C118
C129
C142
C155
R165
U15
U23
R241
TP5
R312
R327
R416
R409
TP6
D29
J27
C179
FB36
C182
R332
R313
FB30
R189
R204
R249 R410
R240
R305
TP7
D30
J40
LS10
D27
D28
D42
D43
U22
C168
10
R334
ISO2
20
R311
11
10
R321
R322
R402
R403
LS14
R221
R219
C166
FB24
C126
LS7
R247
C173
R246
R236
C185
J32
LS13
C174
C189
C187
R235
C175
U34
R243
C191
R183
C125
C121
C186
C188
Q11
U35
Q15
C143
R191
C131
R210
R209
J41
R232
R231
LS8
U24
C190
R326
R244
J52
TP4
C172
R248
R239
R304
R308
C178
R307
R408
C177
R310
R214
R213
R245
LS12
C170
L2
Q9
R315
D20
R225
R316
R223
10
R228
LS11
L3
C171
D12
R227
ISO1
R252
J51
D45
R323
R170
Q16
R309
RN8
C146
C124
C132
TR1
36
D44
Q8
J50
R324
Q6
RN5
D8
25
24
Q7
13
10
12
25
D10 6
24
D17
Q4
37
48
Q10
13
36
37
10
12
10
48
D16
25
D6
24
R320
13
12
16
D4
36
Q5
37
D23
R317
16
D14
15
48
D26
D25
15
D24
R319
10
R318
10
C167
10
R325
R167
C106
R134
FB34
BCM MX945GSE Mini ITX Motherboard
APPENDIX C
FIPS CODE LISTINGS
How to Use the FIPS Code Listings
The Header of an EAS Alert Message contains a location code which designates the geographical area affected by the
alert. The location code contains 6-digits formatted PSSCCC, where:
P indicates the county subdivision.
SS indicates the state.
CCC indicates the county.
The P digit of the location code has a range of 0 to 9 and specifies a portion of a county:
1 = Northwest,
6 = East
2 = North
7 = Southwest
3 = Northeast,
8 = South
4 = West
9 = Southeast
5 = Central
0 = all or an unspecified portion of a county
The SSCCC portion of the location code designates the State and County affected by the Alert message. It uses the
Federal Information Processing System (FIPS) code as described by the U.S. Department of Commerce in National
Institute of Standards and Technology publication 772. Each state is assigned a 2-digit code (SS). Each county is
assigned a 3-digit code (CCC). A CCC code of 000 refers to an entire State or Territory.
State FIPS codes (SS) are 2-digit ascending numbers 01 to 56 assigned to an alphabetically ordered list of states as
shown in Table C-1.
Table C-1. State FIPS Codes
NOTE: United States has a FIPS Code of 000000.
State
FIPS
State
FIPS
State
FIPS
State
FIPS
State
FIPS
AL
01
HI
15
MA
25
NM
35
SD
46
AK
02
ID
16
MI
26
NY
36
TN
47
AZ
04
IL
17
MN
27
NC
37
TX
48
AR
05
IN
18
MS
28
ND
38
UT
49
CA
06
IA
19
MO
29
OH
39
VT
50
CO
08
KS
20
MT
30
OK
40
VA
51
CT
09
KY
21
NE
31
OR
41
WA
53
DE
10
LA
22
NV
32
PA
42
WV
54
FL
12
ME
23
NH
33
RI
44
WS
55
GA
13
MD
24
NJ
34
SC
45
WY
56
District of Columbia - 11
C-1
County FIPS codes are 3-digit ascending numbers 000 to 999 assigned to an alphabetically ordered list of counties
within a designated state as shown in Part A.
U.S. Territories FIPS codes are 2-digit ascending numbers from 60 to 78 assigned to an alphabetically ordered list of
Territories as shown in Table C-2.
Table C-2. U.S. Territories FIPS Codes
Territory
FIPS Code
Territory
FIPS Code
Territory
FIPS Code
American Samoa
60
Marshall Islands
68
Puerto Rico
72
Federated States
of Micronesia
64
Northern
Mariana Islands
69
U.S. Minor
Outlying Islands
74
Guam
66
Palau
70
Virgin Islands
78
U.S. Offshore (Marine Areas) FIPS codes are 2-digit numbers from 57 to 98 assigned to an ordered list of Territories as
shown in Table C-3.
Table C-3. Offshore (Marine Areas) FIPS Codes
Territory
FIPS Code
Eastern North Pacific Ocean, and along U.S. West Coast from Canadian border to Mexican border
57
North Pacific Ocean near Alaska, and along Alaska coastline, including the Bering Sea and the Gulf
of Alaska
58
Central Pacific Ocean, including Hawaiian waters
59
South Central Pacific Ocean, including American Samoa waters
61
Western Pacific Ocean, including Mariana Island waters
65
Western North Atlantic Ocean, and along U.S. East Coast, from Canadian border south to Currituck
Beach Light, N.C.
73
Western North Atlantic Ocean, and along U.S. East Coast, South of Currituck Beach Light, N.C.,
following the coastline into Gulf of Mexico to Bonita Beach, FL.,, including the Caribbean Gulf of
Mexico, and along the U.S. Gulf Coast from the Mexican border to Bonita Beach, FL.
75
Lake Superior
91
Lake Michigan
92
Lake Huron
93
Lake St. Clair
94
Lake Erie
96
Lake Ontario
97
St. Lawrence River above St Regis
98
C-2
APPENDIX C
FIPS CODE LISTINGS
CONTENTS
Part A - U. S. State/County FIPS Codes
State
Page
Alabama ..................................................................C-4
Alaska .....................................................................C-4
Arizona ...................................................................C-4
Arkansas .................................................................C-4
California .................................................................C-5
Colorado ..................................................................C-5
Connecticut .............................................................C-5
Delaware ..................................................................C-5
District of Columbia ................................................C-5
Florida .....................................................................C-6
Georgia ....................................................................C-6
Hawaii .....................................................................C-7
Idaho ........................................................................C-7
Illinois ......................................................................C-7
Indiana .....................................................................C-7
Iowa .........................................................................C-8
Kansas .....................................................................C-8
Kentucky .................................................................C-9
Louisiana ................................................................C-9
Maine ....................................................................C-10
Maryland ..............................................................C-10
Massachusetts .......................................................C-10
Michigan ...............................................................C-10
Minnesota .............................................................C-11
Mississippi ............................................................C-11
Missouri ................................................................C-11
State
Page
Montana ............................................................... C-12
Nebraska .............................................................. C-12
Nevada ................................................................. C-13
New Hampshire ................................................... C-13
New Jersey ........................................................... C-13
New Mexico ......................................................... C-13
New York ............................................................. C-13
North Carolina ..................................................... C-14
North Dakota ........................................................ C-14
Ohio ..................................................................... C-14
Oklahoma ............................................................. C-15
Oregon ................................................................. C-15
Pennsylvania ........................................................ C-15
Rhode Island ........................................................ C-16
South Carolina ..................................................... C-16
South Dakota ........................................................ C-16
Tennessee ............................................................. C-16
Texas .................................................................... C-17
Utah ...................................................................... C-18
Vermont ............................................................... C-18
Virginia ................................................................ C-18
Washington .......................................................... C-19
West Virginia ....................................................... C-19
Wisconsin ............................................................. C-19
Wyoming ............................................................. C-20
Part B - U. S. Territories FIPS Codes
Territory
Page
American Samoa....................................................C-21
Federated States of Micronesia..............................C-21
Guam .....................................................................C-21
Marshall Islands.....................................................C-21
North Mariana Islands ..........................................C-21
Territory
Page
Palau...................................................................... C-21
Puerto Rico ........................................................... C-21
U.S. Minor Outlying Islands ................................. C-22
Virgin Islands ........................................................ C-22
C-23
Offshore (Marine Areas)
C-3
Part A - U. S. State/County FIPS Codes
ALABAMA (01000)
AUTAUGA
BALDWIN
BARBOUR
BIBB
BLOUNT
BULLOCK
BUTLER
CALHOUN
CHAMBERS
CHEROKEE
CHILTON
CHOCTAW
CLARKE
CLAY
CLEBURNE
COFFEE
COLBERT
01001
01003
01005
01007
01009
01011
01013
01015
01017
01019
01021
01023
01025
01027
01029
01031
01033
CONECUH
COOSA
COVINGTON
CRENSHAW
CULLMAN
DALE
DALLAS
DE KALB
ELMORE
ESCAMBIA
ETOWAH
FAYETTE
FRANKLIN
GENEVA
GREENE
HALE
HENRY
01035
01037
01039
01041
01043
01045
01047
01049
01051
01053
01055
01057
01059
01061
01063
01065
01067
ALEUTIANS EAST
02013
02090
ALEUTIANS WEST
02016
FAIRBANKS NORTH
STAR
HAINES
ANCHORAGE
02020
BETHEL
HOUSTON
JACKSON
JEFFERSON
LAMAR
LAUDERDALE
LAWRENCE
LEE
LIMESTONE
LOWNDES
MACON
MADISON
MARENGO
MARION
MARSHALL
MOBILE
MONROE
MONTGOMERY
01069
01071
01073
01075
01077
01079
01081
01083
01085
01087
01089
01091
01093
01095
01097
01099
01101
MORGAN
PERRY
PICKENS
PIKE
RANDOLPH
RUSSELL
SAINT CLAIR
SHELBY
SUMTER
TALLADEGA
TALLAPOOSA
TUSCALOOSA
WALKER
WASHINGTON
WILCOX
WINSTON
01103
01105
01107
01109
01111
01113
01115
01117
01119
01121
01123
01125
01127
01129
01131
01133
02170
JUNEAU
02110
NORTH SLOPE
02185
SKAGWAYHOONAH-ANGOON
SOUTHEAST
FAIRBANKS
VALDEZCORDOVA
02232
02100
MATANUSKASUSITNA
NOME
02050
KENAI PENINSULA
02122
02188
WADE HAMPTON
02270
BRISTOL BAY
02060
02130
02201
02068
02070
WRANGELLPETERSBURG
YAKUTAT
YUKON-KOYUKUK
02280
DENALI
DILLINGHAM
KETCHIKAN
GATEWAY
KODIAK ISLAND
LAKE AND
PENINSULA
NORTHWEST
ARCTIC
PRINCE OF WALESOUTER KETCHIKAN
SITKA
SKAGWAYYAKUTAT-ANGOON
ALASKA (02000)
02150
02164
02180
02220
02231
02240
02261
02282
02290
ARIZONA (04000)
APACHE
04001
GRAHAM
04009
MOHAVE
04015
SANTA CRUZ
COCHISE
04003
GREENLEE
04011
NAVAJO
04017
YAVAPAI
04023
04025
COCONINO
04005
LA PAZ
04012
PIMA
04019
YUMA
04027
GILA
04007
MARICOPA
04013
PINAL
04021
ARKANSAS (05000)
ARKANSAS
ASHLEY
BAXTER
BENTON
BOONE
BRADLEY
CALHOUN
CARROLL
CHICOT
CLARK
CLAY
CLEBURNE
CLEVELAND
COLUMBIA
C-4
05001
05003
05005
05007
05009
05011
05013
05015
05017
05019
05021
05023
05025
05027
DALLAS
DESHA
DREW
FAULKNER
FRANKLIN
FULTON
GARLAND
GRANT
GREENE
HEMPSTEAD
HOT SPRING
HOWARD
INDEPENDENCE
IZARD
05039
05041
05043
05045
05047
05049
05051
05053
05055
05057
05059
05061
05063
05065
LEE
LINCOLN
LITTLE RIVER
LOGAN
LONOKE
MADISON
MARION
MILLER
MISSISSIPPI
MONROE
MONTGOMERY
NEVADA
NEWTON
OUACHITA
05077
05079
05081
05083
05085
05087
05089
05091
05093
05095
05097
05099
05101
05103
POPE
PRAIRIE
PULASKI
RANDOLPH
SAINT FRANCIS
SALINE
SCOTT
SEARCY
SEBASTIAN
SEVIER
SHARP
STONE
UNION
VAN BUREN
05115
05117
05119
05121
05123
05125
05127
05129
05131
05133
05135
05137
05139
05141
ARKANSAS (05000) (Continued)
CONWAY
CRAIGHEAD
CRAWFORD
CRITTENDEN
CROSS
05029
05031
05033
05035
05037
JACKSON
JEFFERSON
JOHNSON
LAFAYETTE
LAWRENCE
05067
05069
05071
05073
05075
PERRY
PHILLIPS
PIKE
POINSETT
POLK
05105
05107
05109
05111
05113
WASHINGTON
WHITE
WOODRUFF
YELL
05143
05145
05147
05149
06061
06063
06065
06067
06069
06071
06073
06075
06077
06079
06081
06083
06085
06087
06089
SIERRA
SISKIYOU
SOLANO
SONOMA
STANISLAUS
SUTTER
TEHAMA
TRINITY
TULARE
TUOLUMNE
VENTURA
YOLO
YUBA
06091
06093
06095
06097
06099
06101
06103
06105
06107
06109
06111
06113
061l5
08063
08065
08067
08069
08071
08073
08075
08077
08079
08081
08083
08085
08087
08089
08091
08093
PHILLIPS
PITKIN
PROWERS
PUEBLO
RIO BLANCO
RIO GRANDE
ROUTT
SAGUACHE
SAN JUAN
SAN MIGUEL
SEDGWICK
SUMMIT
TELLER
WASHINGTON
WELD
YUMA
08095
08097
08099
08101
08103
08105
08107
08109
08111
08113
08115
08117
08119
08121
08123
08125
09009
09011
TOLLAND
WINDHAM
09013
09015
CALIFORNIA (06000)
ALAMEDA
ALPINE
AMADOR
BUTTE
CALAVERAS
COLUSA
CONTRA COSTA
DEL NORTE
EL DORADO
FRESNO
GLENN
HUMBOLDT
IMPERIAL
INYO
KERN
06001
06003
06005
06007
06009
06011
06013
06015
06017
06019
06021
06023
06025
06027
06029
KINGS
LAKE
LASSEN
LOS ANGELES
MADERA
MARIN
MARIPOSA
MENDOCINO
MERCED
MODOC
MONO
MONTEREY
NAPA
NEVADA
ORANGE
ADAMS
ALAMOSA
ARAPAHOE
ARCHULETA
BACA
BENT
BOULDER
BROOMFIELD
CHAFFEE
CHEYENNE
CLEAR CREEK
CONEJOS
COSTILLA
CROWLEY
CUSTER
DELTA
08001
08003
08005
08007
08009
08011
08013
08014
08015
08017
08019
08021
08023
08025
08027
08029
DENVER
DOLORES
DOUGLAS
EAGLE
ELBERT
EL PASO
FREMONT
GARFIELD
GILPIN
GRAND
GUNNISON
HINSDALE
HUERFANO
JACKSON
JEFFERSON
KIOWA
FAIRFIELD
HARTFORD
09001
09003
LITCHFIELD
MIDDLESEX
KENT
10001
NEW CASTLE
06031
06033
06035
06037
06039
06041
06043
06045
06047
06049
06051
06053
06055
06057
06059
PLACER
PLUMAS
RIVERSIDE
SACRAMENTO
SAN BENITO
SAN BERNARDINO
SAN DIEGO
SAN FRANCISCO
SAN JOAQUIN
SAN LUIS OBISPO
SAN MATEO
SANTA BARBARA
SANTA CLARA
SANTA CRUZ
SHASTA
COLORADO (08000)
08031
08033
08035
08037
08039
08041
08043
08045
08047
08049
08051
08053
08055
08057
08059
08061
KIT CARSON
LAKE
LA PLATA
LARIMER
LAS ANIMAS
LINCOLN
LOGAN
MESA
MINERAL
MOFFAT
MONTEZUMA
MONTROSE
MORGAN
OTERO
OURAY
PARK
CONNECTICUT (09000)
09005
09007
NEW HAVEN
NEW LONDON
DELAWARE (10000)
DISTRICT OF COLUMBIA
10003
SUSSEX
10005
11001
C-5
FLORIDA (12000)
ALACHUA
BAKER
BAY
BRADFORD
BREVARD
BROWARD
CALHOUN
CHARLOTTE
CITRUS
CLAY
COLLIER
COLUMBIA
DADE
DE SOTO
DIXIE
DUVAL
ESCAMBIA
12001
12003
12005
12007
12009
12011
12013
12015
12017
12019
12021
12023
12025
12027
12029
12031
12033
FLAGLER
FRANKLIN
GADSDEN
GILCHRIST
GLADES
GULF
HAMILTON
HARDEE
HENDRY
HERNANDO
HIGHLANDS
HILLSBOROUGH
HOLMES
INDIAN RIVER
JACKSON
JEFFERSON
LAFAYETTE
APPLING
ATKINSON
BACON
BAKER
BALDWIN
BANKS
BARROW
BARTOW
BEN HILL
BERRIEN
BIBB
BLECKLEY
BRANTLEY
BROOKS
BRYAN
BULLOCH
BURKE
BUTTS
CALHOUN
CAMDEN
CANDLER
CARROLL
CATOOSA
CHARLTON
CHATHAM
CHATTAHOOCHEE
CHATTOOGA
CHEROKEE
CLARKE
CLAY
CLAYTON
CLINCH
COBB
COFFEE
COLQUITT
COLUMBUS
13001
13003
13005
13007
13009
13011
13013
13015
13017
13019
13021
13023
13025
13027
13029
13031
13033
13035
13037
13039
13043
13045
13047
13049
13051
13053
13055
13057
13059
13061
13063
13065
13067
13069
13071
13073
DADE
DAWSON
DECATUR
DE KALB
DODGE
DOOLY
DOUGHERTY
DOUGLAS
EARLY
ECHOLS
EFFINGHAM
ELBERT
EMANUEL
EVANS
FANN1N
FAYETTE
FLOYD
FORSYTH
FRANKLIN
FULTON
GILMER
GLASCOCK
GLYNN
GORDON
GRADY
GREENE
GWINNETT
HABERSHAM
HALL
HANCOCK
HARALSON
HARRIS
HART
HEARD
HENRY
HOUSTON
12035
12037
12039
12041
12043
12045
12047
12049
12051
12053
12055
12057
12059
12061
12063
12065
12067
LAKE
LEE
LEON
LEW
LIBERTY
MADISON
MANATEE
MARION
MARTIN
MIAMI-DADE
MONROE
NASSAU
OKALOOSA
OKEECHOBEE
ORANGE
OSCEOLA
PALM BEACH
12069
12071
12073
12075
12077
12079
12081
12083
12085
12086
12087
12089
12091
12093
12095
12097
12099
PASCO
PINELLAS
POLK
PUTNAM
SAINT JOHNS
SAINT LUCIE
SANTA ROSA
SARASOTA
SEMINOLE
SUMTER
SUWANNEE
TAYLOR
UNION
VOLUSIA
WAKULLA
WALTON
WASHINGTON
12101
12103
12105
12107
12109
12111
12113
12115
12117
12119
12121
12123
12125
12127
12129
12131
12133
13163
13165
13167
13169
13171
13173
13175
13177
13179
13181
13183
13185
13187
13189
13191
13193
13195
13197
13199
13201
13205
13207
13209
13211
13213
13215
13217
13219
13221
13223
13225
13227
13229
13231
13233
13235
RICHMOND
ROCKDALE
SCHLEY
SCREVEN
SEMINOLE
SPALDING
STEPHENS
STEWART
SUMTER
TALBOT
TALIAFERRO
TATTNALL
TAYLOR
TELFAIR
TERRELL
THOMAS
TIFT
TOOMBS
TOWNS
TREUTLEN
TROUP
TURNER
TWIGGS
UNION
UPSON
WALKER
WALTON
WARE
WARREN
WASHINGTON
WAYNE
WEBSTER
WHEELER
WHITE
WHITFIELD
WILCOX
13245
13247
13249
13251
13253
13255
13257
13259
13261
13263
13265
13267
13269
13271
13273
13275
13277
13279
13281
13283
13285
13287
13289
13291
13293
13295
13297
13299
13301
13303
13305
13307
13309
13311
13313
13315
GEORGIA (13000)
C-6
13083
13085
13087
13089
13091
13093
13095
13097
13099
13101
13103
13105
13107
13109
13111
13113
13115
13117
13119
13121
13123
13125
13127
13129
13131
13133
13135
13137
13139
13141
13143
13145
13147
13149
13151
13153
JEFFERSON
JENKINS
JOHNSON
JONES
LAMAR
LANIER
LAURENS
LEE
LIBERTY
LINCOLN
LONG
LOWNDES
LUMPKIN
MCDUFFIE
MCINTOSH
MACON
MADISON
MARION
MERIWETHER
MILLER
MITCHELL
MONROE
MONTGOMERY
MORGAN
MURRAY
MUSCOGEE
NEWTON
OCONEE
OGLETHORPE
PAULDING
PEACH
PICKENS
PIERCE
PIKE
POLK
PULASKI
COOK
13075
IRWIN
13155
PUTNAM
13237
WILKES
13317
13239
13241
13243
WlLKlNSON
WORTH
13319
13321
15007
MAUI
15009
16045
16047
16049
16051
16053
16055
16057
16059
16061
16063
16065
MINIDOKA
NEZ PERCE
ONEIDA
OWYHEE
PAYETTE
POWER
SHOSHONE
TETON
TWIN FALLS
VALLEY
WASHINGTON
16067
16069
16071
16073
16075
16077
16079
16081
16083
16085
16087
17105
17107
17109
17111
17113
17115
17117
17119
17121
17123
17125
17127
17129
17131
17133
17135
17137
17139
17141
17143
17145
17147
17149
17151
17153
17155
RANDOLPH
RICHLAND
ROCK ISLAND
SAINT CLAIR
SALINE
SANGAMON
SCHUYLER
SCOTT
SHELBY
STARK
STEPHENSON
TAZEWELL
UNION
VERMILION
WABASH
WARREN
WASHINGTON
WAYNE
WHITE
WHITESIDE
WILL
WILLLEMSON
WINNEBAGO
WOODFORD
17157
17159
17161
17163
17165
17167
17169
17171
17173
17175
17177
17179
17181
17183
17185
17187
17189
17191
17193
17195
17197
17199
17201
17203
18093
18095
18097
18099
RUSH
SAINT JOSEPH
SCOTT
SHELBY
18139
18141
18143
18145
GEORGIA (13000) (Continued)
COWETA
CRAWFORD
CRISP
13077
13079
13081
JACKSON
JASPER
JEFF DAVIS
HAWAII
HONOLULU
15001
15003
KALAWAO
ADA
ADAMS
BANNOCK
BEAR LAKE
BENEWAH
BINGHAM
BLAINE
BOISE
BONNER
BONNEVILLE
BOUNDARY
16001
16003
16005
16007
16009
16011
16013
16015
16017
16019
16021
BUTTE
CAMAS
CANYON
CARIBOU
CASSIA
CLARK
CLEARWATER
CUSTER
ELMORE
FRANKLIN
FREMONT
ADAMS
ALEXANDER
BOND
BOONE
BROWN
BUREAU
CALHOUN
CARROLL
CASS
CHAMPAIGN
CHRISTIAN
CLARK
CLAY
CLINTON
COLES
COOK
CRAWFORD
CUMBERLAND
DE KALB
DE WITT
DOUGLAS
DU PAGE
EDGAR
EDWARDS
EFFINGHAM
FAYETTE
17001
17003
17005
17007
17009
17011
17013
17015
17017
17019
17021
17023
17025
17027
17029
17031
17033
17035
17037
17039
17041
17043
17045
17047
17049
17051
FORD
FRANKLIN
FULTON
GALLATIN
GREENE
GRUNDY
HAMILTON
HANCOCK
HARDIN
HENDERSON
HENRY
IROQUOIS
JACKSON
JASPER
JEFFERSON
JERSEY
JO DAVIESS
JOHNSON
KANE
KANKAKEE
KENDALL
KNOX
LAKE
LA SALLE
LAWRENCE
LEE
ADAMS
ALLEN
BARTHOLOMEW
BENTON
18001
18003
18005
18007
FRANKLIN
FULTON
GIBSON
GRANT
13157
13159
13161
QUITMAN
RABUN
RANDOLPH
HAWAII (15000)
15005
KAUAI
IDAHO (16000)
16023
16025
16027
16029
16031
16033
16035
16037
16039
16041
16043
GEM
GOODING
IDAHO
JEFFERSON
JEROME
KOOTENAI
LATAH
LEMHI
LEWIS
LINCOLN
MADISON
ILLINOIS (17000)
17053
17055
17057
17059
17061
17063
17065
17067
17069
17071
17073
17075
17077
17079
17081
17083
17085
17087
17089
17091
17093
17095
17097
17099
17101
17103
LIVINGSTON
LOGAN
MCDONOUGH
MCHENRY
MCLEAN
MACON
MACOUPIN
MADISON
MARION
MARSHALL
MASON
MASSAC
MENARD
MERCER
MONROE
MONTGOMERY
MORGAN
MOULTRIE
OGLE
PEORIA
PERRY
PIATT
PIKE
POPE
PULASKI
PUTNAM
INDIANA (18000)
18047
18049
18051
18053
LAWRENCE
MADISON
MARION
MARSHALL
C-7
BLACKFORD
BOONE
18009
18011
GREENE
HAMILTON
BROWN
CARROLL
CASS
CLARK
CLAY
CLINTON
CRAWFORD
DAVIESS
DEARBORN
DECATUR
DE KALB
DELAWARE
DUBOIS
ELKHART
FAYETTE
FLOYD
FOUNTAIN
18013
18015
18017
18019
18021
18023
18025
18027
18029
18031
18033
18035
18037
18039
18041
18043
18045
HANCOCK
HARRISON
HENDRICKS
HENRY
HOWARD
HUNTINGTON
JACKSON
JASPER
JAY
JEFFERSON
JENNINGS
JOHNSON
KNOX
KOSCIUSKO
LAGRANGE
LAKE
LA PORTE
ADAIR
ADAMS
ALLAMAKEE
APPANOOSE
AUDUBON
BENTON
BLACK HAWK
BOONE
BREMER
BUCHANAN
BUENA VISTA
BUTLER
CALHOUN
CARROLL
CASS
CEDAR
CERRO GORDO
CHEROKEE
CHICKASAW
CLARKE
CLAY
CLAYTON
CLINTON
CRAWFORD
DALLAS
19001
19003
19005
19007
19009
19011
19013
19015
19017
19019
19021
19023
19025
19027
19029
19031
19033
19035
19037
19039
19041
19043
19045
19047
19049
DAVIS
DECATUR
DELAWARE
DES MOINES
DICKINSON
DUBUQUE
EMMET
FAYETTE
FLOYD
FRANKLIN
FREMONT
GREENE
GRUNDY
GUTHRIE
HAMILTON
HANCOCK
HARDIN
HARRISON
HENRY
HOWARD
HUMBOLDT
IDA
IOWA
JACKSON
JASPER
ALLEN
ANDERSON
ATCHISON
BARBER
BARTON
BOURBON
BROWN
BUTLER
CHASE
20001
20003
20005
20007
20009
20011
20013
20015
20017
FINNEY
FORD
FRANKLIN
GEARY
GOVE
GRAHAM
GRANT
GRAY
GREELEY
18055
18057
MARTIN
MIAMI
18101
18103
SPENCER
STARKE
18147
18149
18105
18107
18109
18111
18113
18115
18117
18119
18121
18123
18125
18127
18129
18131
18133
18135
18137
STEUBEN
SULLIVAN
SWITZERLAND
TIPPECANOE
TIPTON
UNION
VANDERBURGH
VERMILLION
VIGO
WABASH
WARREN
WARRICK
WASHINGTON
WAYNE
WELLS
WHITE
WHITLEY
18151
18153
18155
18157
18159
18161
18163
18165
18167
18169
18171
18173
18175
18177
18179
18181
18183
19101
19103
19105
19107
19109
19111
19113
19115
19117
19119
19121
19123
19125
19127
19129
19131
19133
19135
19137
19139
19141
19143
19145
19147
19149
POCAHONTAS
POLK
POTTAWATTAMIE
POWESHIEK
RINGGOLD
SAC
SCOTT
SHELBY
SIOUX
STORY
TAMA
TAYLOR
UNION
VAN BUREN
WAPELLO
WARREN
WASHINGTON
WAYNE
WEBSTER
WINNEBAGO
WINNESHIEK
WOODBURY
WORTH
WRIGHT
19151
19153
19155
19157
19159
19161
19163
19165
19167
19169
19171
19173
19175
19177
19179
19181
19183
19185
19187
19189
19191
19193
19195
19197
20109
20111
20113
20115
20117
20119
20121
20123
20125
ROOKS
RUSH
RUSSELL
SALINE
SCOTT
SEDGWICK
SEWARD
SHAWNEE
SHERIDAN
20163
20165
20167
20169
20171
20173
20175
20177
20179
INDIANA (18000) (Continued)
18059
18061
18063
18065
18067
18069
18071
18073
18075
18077
18079
18081
18083
18085
18087
18089
18091
MONROE
MONTGOMERY
MORGAN
NEWTON
NOBLE
OHIO
ORANGE
OWEN
PARKE
PERRY
PIKE
PORTER
POSEY
PULASKI
PUTNAM
RANDOLPH
RIPLEY
IOWA (19000)
19051
19053
19055
19057
19059
19061
19063
19065
19067
19069
19071
19073
19075
19077
19079
19081
19083
19085
19087
19089
19091
19093
19095
19097
19099
JEFFERSON
JOHNSON
JONES
KEOKUK
KOSSUTH
LEE
LINN
LOUISA
LUCAS
LYON
MADISON
MAHASKA
MARION
MARSHALL
MILLS
MITCHELL
MONONA
MONROE
MONTGOMERY
MUSCATINE
O’BRIEN
OSCEOLA
PAGE
PALO ALTO
PLYMOUTH
KANSAS (20000)
C-8
20055
20057
20059
20061
20063
20065
20067
20069
20071
LOGAN
LYON
MCPHERSON
MARION
MARSHALL
MEADE
MlAMI
MITCHELL
MONTGOMERY
CHAUTAUQUA
CHEROKEE
20019
20021
GREENWOOD
HAMILTON
20073
20075
CHEYENNE
CLARK
CLAY
CLOUD
COFFEY
COMANCHE
COWLEY
CRAWFORD
DECATUR
DICKINSON
DONIPHAN
DOUGLAS
EDWARDS
ELK
ELLIS
ELLSWORTH
20023
20025
20027
20029
20031
20033
20035
20037
20039
20041
20043
20045
20047
20049
20051
20053
HARPER
HARVEY
HASKELL
HOWEMAN
JACKSON
JEFFERSON
JEWELL
JOHNSON
KEARNY
KINGMAN
KIOWA
LABETTE
LANE
LEAVENWORTH
LINCOLN
LINN
ADAIR
ALLEN
ANDERSON
BALLARD
BARREN
BATH
BELL
BOONE
BOURBON
BOYD
BOYLE
BRACKEN
BREATHITT
BRECKINRIDGE
BULLITT
BUTLER
CALDWELL
CALLOWAY
CAMPBELL
CARLISLE
CARROLL
CARTER
CASEY
CHRISTIAN
CLARK
CLAY
CLINTON
CRITTENDEN
CUMBERLAND
DAVIESS
21001
21003
21005
21007
21009
21011
21013
21015
21017
21019
21021
21023
21025
21027
21029
21031
21033
21035
21037
21039
21041
21043
21045
21047
21049
21051
21053
21055
21057
21059
EDMONSON
ELLIOTT
ESTILL
FAYETTE
FLEMING
FLOYD
FRANKLIN
FULTON
GALLATIN
GARRARD
GRANT
GRAVES
GRAYSON
GREEN
GREENUP
HANCOCK
HARDIN
HARLAN
HARRISON
HART
HENDERSON
HENRY
HICKMAN
HOPKINS
JACKSON
JEFFERSON
JESSAMINE
JOHNSON
KENTON
KNOTT
ACADIA
ALLEN
ASCENSION
ASSUMPTION
AVOYELLES
22001
22003
22005
22007
22009
EAST BATON ROUGE
EAST CARROLL
EAST FELICIANA
EVANGELINE
FRANKLIN
MORRIS
MORTON
20127
20129
SHERMAN
SMITH
20181
20183
20131
20133
20135
20137
20139
20141
20143
20145
20147
20149
20151
20153
20155
20157
20159
20161
STAFFORD
STANTON
STEVENS
SUMNER
THOMAS
TREGO
WABAUNSEE
WALLACE
WASHINGTON
WICHITA
WILSON
WOODSON
WYANDOTTE
20185
20187
20189
20191
20193
20195
20197
20199
20201
20203
20205
20207
20209
21121
21123
21125
21127
21129
21131
21133
21135
21137
21139
21141
21143
21145
21147
21149
21151
21153
21155
21157
21159
21161
21163
21165
21167
21169
21171
21173
21175
21177
21179
NICHOLAS
OHIO
OLDHAM
OWEN
OWSLEY
PENDLETON
PERRY
PIKE
POWELL
PULASKI
ROBERTSON
ROCKCASTLE
ROWAN
RUSSELL
SCOTT
SHELBY
SIMPSON
SPENCER
TAYLOR
TODD
TRIGG
TRIMBLE
UNION
WARREN
WASHINGTON
WAYNE
WEBSTER
WHITLEY
WOLFE
WOODFORD
21181
21183
21185
21187
21189
21191
21193
21195
21197
21199
21201
21203
21205
21207
21209
21211
21213
21215
21217
21219
21221
21223
21225
21227
21229
21231
21233
21235
21237
21239
22065
22067
22069
22071
22073
SAINT LANDRY
SAINT MARTIN
SAINT MARY
SAINT TAMMANY
TANGIPAHOA
22097
22099
22101
22103
22105
KANSAS (20000) (Continued)
20077
20079
20081
20083
20085
20087
20089
20091
20093
20095
20097
20099
20101
20103
20105
20107
NEMAHA
NEOSHO
NESS
NORTON
OSAGE
OSBORNE
OTTAWA
PAWNEE
PHILLIPS
POTTAWATOMIE
PRATT
RAWLINS
RENO
REPUBLIC
RICE
RILEY
KENTUCKY (21000)
21061
21063
21065
21067
21069
21071
21073
21075
21077
21079
21081
21083
21085
21087
21089
21091
21093
21095
21097
21099
21101
21103
21105
21107
21109
21111
21113
21115
21117
21119
KNOX
LARVE
LAUREL
LAWRENCE
LEE
LESLIE
LETCHER
LEWIS
LINCOLN
LIVINGSTON
LOGAN
LYON
MCCRACKEN
MCCREARY
MCLEAN
MADISON
MAGOFFIN
MARION
MARSHALL
MARTIN
MASON
MEADE
MENIFEE
MERCER
METCALFE
MONROE
MONTGOMERY
MORGAN
MUHLENBERG
NELSON
LOUISIANA (22000)
22033
22035
22037
22039
22041
MADISON
MOREHOUSE
NATCHITOCHES
ORLEANS
OUACHITA
C-9
BEAUREGARD
BIENVILLE
22011
22013
GRANT
IBERIA
22043
22045
BOSSER
CADDO
CALCASIEU
CALDWELL
CAMERON
CATAHOULA
CLAIBORNE
CONCORDIA
DE SOTO
22015
22017
22019
22021
22023
22025
22027
22029
22031
IBERVILLE
JACKSON
JEFFERSON
JEFFERSON DAVIS
LAFAYETTE
LAFOURCHE
LA SALLE
LINCOLN
LIVINGSTON
22047
22049
22051
22053
22055
22057
22059
22061
22063
ANDROSCOGGIN
AROOSTOOK
CUMBERLAND
FRANKLIN
23001
23003
23005
23007
HANCOCK
KENNEBEC
KNOX
LINCOLN
23009
23011
23013
23015
ALLEGANY
ANNE ARUNDEL
BALTIMORE
BALTIMORE CITY
CALVERT
CAROLINE
24001
24003
24005
24510
24009
24011
CARROLL
CECIL
CHARLES
DORCHESTER
FREDERICK
GARRETT
BARNSTABLE
BERKSHIRE
BRISTOL
DUKES
25001
25003
25005
25007
ESSEX
FRANKLIN
HAMPDEN
HAMPSHIRE
ALCONA
ALGER
ALLEGAN
ALPENA
ANTRIM
ARENAC
BARAGA
BARRY
BAY
BENZIE
BERRIEN
BRANCH
CALHOUN
CASS
CHARLEVOIX
CHEBOYGAN
CHIPPEWA
CLARE
CLINTON
CRAWFORD
DELTA
26001
26003
26005
26007
26009
26011
26013
26015
26017
26019
26021
26023
26025
26027
26029
26031
26033
26035
26037
26039
26041
DICKINSON
EATON
EMMET
GENESEE
GLADWIN
GOGEBIC
GRAND TRAVERSE
GRATIOT
HILLSDALE
HOUGHTON
HURON
INGHAM
IONIA
IOSCO
IRON
ISABELLA
JACKSON
KALAMAZOO
KALKASKA
KENT
KEEWEENAW
PLAQUEMINES
POINTE COUPEE
22075
22077
TENSAS
TERREBONNE
22107
22109
22079
22081
22083
22085
22087
22089
22091
22093
22095
UNION
VERMILION
VERNON
WASHINGTON
WEBSTER
WEST CARROLL
WEST FELICIANA
WINN
22111
22113
22115
22117
22119
22121
22123
22125
22127
23017
23019
23021
23023
SOMERSET
WALDO
WASHINGTON
YORK
23025
23027
23029
23031
24025
24027
24029
24031
24033
24035
SAINT MARY'S
SOMERSET
TALBOT
WASHINGTON
WICOMICO
WORCESTER
24037
24039
24041
24043
24045
24047
25017
25019
25021
25023
SUFFOLK
WORCESTER
25025
25027
26085
26087
26089
26091
26093
26095
26097
26099
26101
26103
26105
26107
26109
26111
26113
26115
26117
26119
26121
26123
26125
OCEANA
OGEMAW
ONTONAGON
OSCEOLA
OSCODA
OTSEGO
OTTAWA
PRESQUE ISLE
ROSCOMMON
SAGINAW
SAINT CLAIR
SAINT JOSEPH
SANILAC
SCHOOLCRAFT
SHIAWASSEE
TUSCOLA
VAN BUREN
WASHTENAW
WAYNE
WEXFORD
26127
26129
26131
26133
26135
26137
26139
26141
26143
26145
26147
26149
26151
26153
26155
26157
26159
26161
26163
26165
LOUISIANA (22000) (Continued)
RAPIDES
RED RIVER
RICHLAND
SABINE
SAINT BERNARD
SAINT CHARLES
SA1NT HELENA
SA1NT JAMES
ST JOHN THE BAPTIST
WEST BATON ROUGE
MAINE (23000)
OXFORD
PENOBSCOT
PISCATAQUIS
SAGADAHOC
MARYLAND (24000)
24013
24015
24017
24019
24021
24023
HARFORD
HOWARD
KENT
MONTGOMERY
PRINCE GEORGE'S
QUEEN ANNE'S
MASSACHUSETTS (25000)
25009
25011
25013
25015
MIDDLESEX
NANTUCKET
NORFOLK
PLYMOUTH
MICHIGAN (26000)
C-10
26043
26045
26047
26049
26051
26053
26055
26057
26059
26061
26063
26065
26067
26069
26071
26073
26075
26077
26079
26081
26083
LAKE
LAPEER
LEELANAU
LENAWEE
LIVINGSTON
LUCE
MACKINAC
MACOMB
MANISTEE
MARQUETTE
MASON
MECOSTA
MENOMINEE
MIDLAND
MISSAUKEE
MONROE
MONTCALM
MONTMORENCY
MUSKEGON
NEWAYGO
OAKLAND
MINNESOTA (27000)
AITKIN
ANOKA
BECKER
BELTRAMI
BENTON
BIG STONE
BLUE EARTH
BROWN
CARLTON
CARVER
CASS
CHIPPEWA
CHISAGO
CLAY
CLEARWATER
COOK
COTTONWOOD
CROW WING
DAKOTA
DODGE
DOUGLAS
FARIBAULT
27001
27003
27005
27007
27009
27011
27013
27015
27017
27019
27021
27023
27025
27027
27029
27031
27033
27035
27037
27039
27041
27043
FILLMORE
FREEBORN
GOODHUE
GRANT
HENNEPIN
HOUSTON
HUBBARD
ISANTI
ITASCA
JACKSON
KANABEC
KANDIYOHI
KITTSON
KOOCHICHING
LAC QUI PARLE
LAKE
LAKE OF THE WOODS
LE SUEUR
LINCOLN
LYON
MCLEOD
MAHNOMEN
ADAMS
ALCORN
AMITE
ATTALA
BENTON
BOLIVAR
CALHOUN
CARROLL
CHICKASAW
CHOCTAW
CLAIBORNE
CLARKE
CLAY
COAHOMA
COPIAH
COVINGTON
DE SOTO
FORREST
FRANKLIN
GEORGE
GREENE
28001
28003
28005
28007
28009
28011
28013
28015
28017
28019
28021
28023
28025
28027
28029
28031
28033
28035
28037
28039
28041
GRENADA
HANCOCK
HARRISON
HINDS
HOLMES
HUMPHREYS
ISSAQUENA
ITAWAMBA
JACKSON
JASPER
JEFFERSON
JEFFERSON DAVIS
JONES
KEMPER
LAFAYETTE
LAMAR
LAUDERDALE
LAWRENCE
LEAKE
LEE
LEFLORE
ADAIR
ANDREW
ATCHISON
AUDRAIN
BARRY
BARTON
BATES
BENTON
BOLLINGER
29001
29003
29005
29007
29009
29011
29013
29015
29017
DALLAS
DAVIESS
DE KALB
DENT
DOUGLAS
DUNKLIN
FRANKLIN
GASCONADE
GENTRY
27045
27047
27049
27051
27053
27055
27057
27059
27061
27063
27065
27067
27069
27071
27073
27075
27077
27079
27081
27083
27085
27087
MARSHALL
MARTIN
MEEKER
MILLE LACS
MORRISON
MOWER
MURRAY
NICOLLET
NOBLES
NORMAN
OLMSTED
OTTER TAIL
PENNINGTON
PINE
PIPESTONE
POLK
POPE
RAMSEY
RED LAKE
REDWOOD
RENVILLE
RICE
27089
27091
27093
27095
27097
27099
27101
27103
27105
27107
27109
27111
27113
27115
27117
27119
27121
27123
27125
27127
27129
27131
ROCK
ROSEAU
SAINT LOUIS
SCOTT
SHERBURNE
SIBLEY
STEARNS
STEELE
STEVENS
SWIFT
TODD
TRAVERSE
WABASHA
WADENA
WASECA
WASHINGTON
WATONWAN
WILKIN
WINONA
WRIGHT
YELLOW MEDICINE
27133
27135
27137
27139
27141
27143
27145
27147
27149
27151
27153
27155
27157
27159
27161
27163
27165
27167
27169
27171
27173
28085
28087
28089
28091
28093
28095
28097
28099
28101
28103
28105
28107
28109
28111
28113
28115
28117
28119
28121
28123
28125
SIMPSON
SMITH
STONE
SUNFLOWER
TALLAHATCHIE
TATE
TIPPAH
TISHOMINGO
TUNICA
UNION
WALTHALL
WARREN
WASHINGTON
WAYNE
WEBSTER
WILKINSON
WINSTON
YALOBUSHA
YAZOO
28127
28129
28131
28133
28135
28137
28139
28141
28143
28145
28147
28149
28151
28153
28155
28157
28159
28161
28163
29117
29119
29121
29123
29125
29127
29129
29131
29133
RANDOLPH
RAY
REYNOLDS
RIPLEY
SAINT CHARLES
SAINT CLAIR
SAINT GENEVIEVE
SAINT FRANCOIS
SAINT LOUIS
29175
29177
29179
29181
29183
29185
29186
29187
29189
MISSISSIPPI (28000)
28043
28045
28047
28049
28051
28053
28055
28057
28059
28061
28063
28065
28067
28069
28071
28073
28075
28077
28079
28081
28083
LINCOLN
LOWNDES
MADISON
MARION
MARSHALL
MONROE
MONTGOMERY
NESHOBA
NEWTON
NOXUBEE
OKTIBBEHA
PANOLA
PEARL RIVER
PERRY
PIKE
PONTOTOC
PRENTISS
QUITMAN
RANKIN
SCOTT
SHARKEY
MISSOURI (29000)
29059
29061
29063
29065
29067
29069
29071
29073
29075
LIVINGSTON
MCDONALD
MACON
MADISON
MARIES
MARION
MERCER
MILLER
MISSISSIPPI
C-11
MISSOURI (29000) (Continued)
BOONE
BUCHANAN
BUTLER
CALDWELL
CALLAWAY
CAMDEN
CAPE GIRARDEAU
CARROLL
CARTER
CASS
CEDAR
CHARITON
CHRISTIAN
CLARK
CLAY
CLINTON
COLE
COOPER
CRAWFORD
DADE
29019
29021
29023
29025
29027
29029
29031
29033
29035
29037
29039
29041
29043
29045
29047
29049
290S1
29053
29055
29057
GREENE
GRUNDY
HARRISON
HENRY
HICKORY
HOLT
HOWARD
HOWELL
IRON
JACKSON
JASPER
JEFFERSON
JOHNSON
KNOX
LACLEDE
LAFAYETTE
LAWRENCE
LEWIS
LINCOLN
LINN
BEAVERHEAD
BIG HORN
BLAINE
BROADWATER
CARBON
CARTER
CASCADE
CHOUTEAU
CUSTER
DANIELS
DAWSON
DEER LODGE
FALLON
FERGUS
FLATHEAD
30001
30003
30005
30007
30009
30011
30013
30015
30017
30019
30021
30023
30025
30027
30029
GALLATIN
GARFELD
GLACIER
GOLDEN VALLEY
GRANITE
HILL
JEFFERSON
JUDITH BASIN
LAKE
LEWIS AND CLARK
LIBERTY
LINCOLN
MCCONE
MADISON
MEAGHER
ADAMS
ANTELOPE
ARTHUR
BANNER
BLAINE
BOONE
BOX BUTTE
BOYD
BROWN
BUFFALO
BURT
BUTLER
CASS
CEDAR
CHASE
CHERRY
CHEYENNE
31001
31003
31005
31007
31009
31011
31013
31015
31017
31019
31021
31023
31025
31027
31029
31031
31033
DEUEL
DIXON
DODGE
DOUGLAS
DUNDY
FILLMORE
FRANKLIN
FRONTIER
FURNAS
GAGE
GARDEN
GARFIELD
GOSPER
GRANT
GREELEY
HALL
HAMILTON
29077
29079
29081
29083
29085
29087
29089
29091
29093
29095
29097
29099
29101
29103
29105
29107
29109
29111
29113
29115
MONITEAU
MONROE
MONTGOMERY
MORGAN
NEW MADRID
NEWTON
NODAWAY
OREGON
OSAGE
OZARK
PEMISCOT
PERRY
PETTIS
PHELPS
PIKE
PLATTE
POLK
PULASKI
PUTNAM
RALLS
29135
29137
29139
29141
29143
29145
29147
29149
29151
29153
29155
29157
29159
29161
29163
29165
29167
29169
29171
29173
SALINE
SCHUYLER
SCOTLAND
SCOTT
SHANNON
SHELBY
STODDARD
STONE
SULLIVAN
TANEY
TEXAS
VERNON
WARREN
WASHINGTON
WAYNE
WEBSTER
WORTH
WRIGHT
SAINT LOUIS CITY
29195
29197
29199
29201
29203
29205
29207
29209
29211
29213
29215
29217
29219
29221
29223
29225
29227
29229
29510
30061
30063
30065
30067
30069
30071
30073
30075
30077
30079
30081
30083
30085
30087
30089
SHERIDAN
SILVER BOW
STILLWATER
SWEET GRASS
TETON
TOOLE
TREASURE
VALLEY
WHEATLAND
WIBAUX
YELLOWSTONE
Y’STONE NAT’L PARK
30091
30093
30095
30097
30099
30101
30103
30105
30107
30109
30111
30113
31097
31099
31101
31103
31105
31107
31109
31111
31113
31115
31117
31119
31121
31123
31125
31127
31129
RED WILLOW
RICHARDSON
ROCK
SALINE
SARPY
SAUNDERS
SCOTTS BLUFF
SEWARD
SHERIDAN
SHERMAN
SIOUX
STANTON
THAYER
THOMAS
THURSTON
VALLEY
WASHINGTON
31145
31147
31149
31151
31153
31155
31157
31159
31161
31163
31165
31167
31169
31171
31173
31175
31177
MONTANA (30000)
30031
30033
30035
30037
30039
30041
30043
30045
30047
30049
30051
30053
30055
30057
30059
MINERAL
MISSOULA
MUSSELSHELL
PARK
PETROLEUM
PHILLIPS
PONDERA
POWDER RIVER
POWELL
PRAIRIE
RAVALLI
RICHLAND
ROOSEVELT
ROSEBUD
SANDERS
NEBRASKA (31000)
C-12
31049
31051
31053
31055
31057
31059
31061
31063
31065
31067
31069
31071
31073
31075
31077
31079
31081
JOHNSON
KEARNEY
KEITH
KEYA PAHA
KIMBALL
KNOX
LANCASTER
LINCOLN
LOGAN
LOUP
MCPHERSON
MADISON
MERRICK
MORRILL
NANCE
NEMAHA
NUCKOLLS
NEBRASKA (31000) (Continued)
CLAY
COLFAX
CUMING
CUSTER
DAKOTA
DAWES
DAWSON
31035
31037
31039
31041
31043
31045
31047
HARLAN
HAYES
HITCHCOCK
HOLT
HOOKER
HOWARD
JEFFERSON
31083
31085
31087
31089
31091
31093
31095
CHURCHILL
CLARK
DOUGLAS
ELKO
ESMERALDA
32001
32003
32005
32007
32009
EUREKA
HUMBOLDT
LANDER
LINCOLN
LYON
BELKNAP
CARROLL
CHESHIRE
33001
33003
33005
COOS
GRAFTON
HILLSBOROUGH
ATLANTIC
BERGEN
BURLINGTON
CAMDEN
CAPE MAY
CUMBERLAND
34001
34003
34005
34007
34009
34011
ESSEX
GLOUCESTER
HUDSON
HUNTERDON
MERCER
MIDDLESEX
BERNALILLO
CATRON
CHAVES
CIBOLA
COLFAX
CURRY
DE BACA
DONA ANA
VALENCIA
35001
35003
35005
35006
35007
35009
35011
35013
35061
EDDY
GRANT
GUADALUPE
HARDING
HIDALGO
LEA
LINCOLN
LOS ALAMOS
ALBANY
ALLEGANY
BRONX
BROOME
CATTARAUGUS
CAYUGA
CHAUTAQUA
CHEMUNG
CHENANGO
CLINTON
COLUMBIA
CORTLAND
DELAWARE
DUTCHESS
ERIE
ESSEX
36001
36003
36005
36007
36009
36011
36013
36015
36017
36019
36021
36023
36025
36027
36029
36031
FRANKLIN
FULTON
GENESEE
GREENE
HAMILTON
HERKIMER
JEFFERSON
KINGS
LEWIS
LlVINGSTON
MADISON
MONROE
MONTGOMERY
NASSAU
NEW YORK
NIAGARA
OTOE
PAWNEE
PERKINS
PHELPS
PIERCE
PLATTE
POLK
31131
31133
31135
31137
31139
31141
31143
WAYNE
WEBSTER
WHEELER
YORK
31179
31181
31183
31185
32021
32023
32027
32029
32031
WHITE PINE
CARSON CITY
32033
32510
33013
33015
33017
SULLIVAN
33019
34025
34027
34029
34031
34033
34035
SUSSEX
UNION
WARREN
34037
34039
34041
35029
35031
35033
35035
35037
35039
35041
35043
SAN JUAN
SAN MIGUEL
SANTA FE
SIERRA
SOCORRO
TAOS
TORRANCE
UNION
35045
35047
35049
35051
35053
35055
35057
35059
36065
36067
36069
36071
36073
36075
36077
36079
36081
36083
36085
36087
36089
36091
36093
36095
SCHUYLER
SENECA
STEUBEN
SUFFOLK
SULLIVAN
TIOGA
TOMPKINS
ULSTER
WARREN
WASHINGTON
WAYNE
WESTCHESTER
WYOMING
YATES
36097
36099
36101
36103
36105
36107
36109
36111
36113
36115
36117
36119
36121
36123
NEVADA (32000)
32011
32013
32015
32017
32019
MINERAL
NYE
PERSHING
STOREY
WASHOE
NEW HAMPSHIRE (33000)
33007
33009
33011
MERRIMACK
ROCKINGHAM
STRAFFORD
NEW JERSEY (34000)
34013
34015
34017
34019
34021
34023
MONMOUTH
MORRIS
OCEAN
PASSAIC
SALEM
SOMERSET
NEW MEXICO (35000)
35015
35017
35019
35021
35023
35025
35027
35028
LUNA
MCKINLEY
MORA
OTERO
QUAY
RIO ARRIBA
ROOSEVELT
SANDOVAL
NEW YORK (36000)
36033
36035
36037
36039
36041
36043
36045
36047
36049
36051
36053
36055
36057
36059
36061
36063
ONEIDA
ONONDAGA
ONTARIO
ORANGE
ORLEANS
OSWEGO
OTSEGO
PUTNAM
QUEENS
RENSSELAER
RICHMOND
ROCKLAND
ST. LAWRENCE
SARATOGA
SCHENECTADY
SCHOHARIE
C-13
NORTH CAROLINA (37000)
ALAMANCE
ALEXANDER
ALLEGHANY
ANSON
ASHE
AVERY
BEAUFORT
BERTE
BLADEN
BRUNSWICK
BUNCOMBE
BURKE
CABARRUS
CALDWELL
CAMDEN
CARTERET
CASWELL
CATAWBA
CHATHAM
CHEROKEE
CHOWAN
CLAY
CLEVELAND
COLUMBUS
CRAVEN
37001
37003
37005
37007
37009
37011
37013
37015
37017
37019
37021
37023
37025
37027
37029
37031
37033
37035
37037
37039
37041
37043
37045
37047
37049
CUMBERLAND
CURRITUCK
DARE
DAVIDSON
DAVIE
DUPLIN
DURHAM
EDGECOMBE
FORSYTH
FRANKLIN
GASTON
GATES
GRAHAM
GRANVILLE
GREENE
GUILFORD
HALIFAX
HARNETT
HAYWOOD
HENDERSON
HERTFORD
HOKE
HYDE
IREDELL
JACKSON
ADAMS
BARNES
BENSON
BILLINGS
BOTTINEAU
BOWMAN
BURKE
BURLEIGH
OLIVER
PEMBINA
PIERCE
RAMSEY
RANSOM
RENVILLE
38001
38003
38005
38007
38009
38011
38013
38015
38065
38067
38069
38071
38073
38075
CASS
CAVALIER
DICKEY
DIVIDE
DUNN
EDDY
EMMONS
FOSTER
RICHLAND
ROLETTE
SARGENT
SHERIDAN
SIOUX
SLOPE
ADAMS
ALLEN
ASHLAND
ASHTABULA
ATHENS
AUGLAIZE
BELMONT
BROWN
BUTLER
CARROLL
CHAMPAIGN
CLARK
CLERMONT
39001
39003
39005
39007
39009
39011
39013
39015
39017
39019
39021
39023
39025
FAIRFIELD
FAYETTE
FRANKLIN
FULTON
GALLIA
GEAUGA
GREENE
GUERNSEY
HAMILTON
HANCOCK
HARDIN
HARRISON
HENRY
37051
37053
37055
37057
37059
37061
37063
37065
37067
37069
37071
37073
37075
37077
37079
37081
37083
37085
37087
37089
37091
37093
37095
37097
37099
JOHNSTON
JONES
LEE
LENOIR
LINCOLN
MCDOWELL
MACON
MADISON
MARTIN
MECKLENBURG
MITCHELL
MONTGOMERY
MOORE
NASH
NEW HANOVER
NORTHAMPTON
ONSLOW
ORANGE
PAMLICO
PASQUOTANK
PENDER
PERQUIMANS
PERSON
PITT
POLK
37101
37103
37105
37107
37109
37111
37113
37115
37117
37119
37121
37123
37125
37127
37129
37131
37133
37135
37137
37139
37141
37143
37145
37147
37149
RANDOLPH
RICHMOND
ROBESON
ROCKINGHAM
ROWAN
RUTHERFORD
SAMPSON
SCOTLAND
STANLY
STOKES
SURRY
SWAIN
TRANSYLVANIA
TYRRELL
UNION
VANCE
WAKE
WARREN
WASHINGTON
WATAUGA
WAYNE
WILKES
WILSON
YADKIN
YANCEY
37151
37153
37155
37157
37159
37161
37163
37165
37167
37169
37171
37173
37175
37177
37179
37181
37183
37185
37187
37189
37191
37193
37195
37197
37199
38033
38035
38037
38039
38041
38043
38045
38047
38089
38091
38093
38095
38097
38099
MCHENRY
MCINTOSH
MCKENZIE
MCLEAN
MERCER
MORTON
MOUNTRAIL
NELSON
WARD
WELLS
WILLIAMS
38049
38051
38053
38055
38057
38059
38061
38063
38101
38103
38105
39089
39091
39093
39095
39097
39099
39101
39103
39105
39107
39109
39111
39113
PORTAGE
PREBLE
PUTNAM
RICHLAND
ROSS
SANDUSKY
SCIOTO
SENECA
SHELBY
STARK
SUMMIT
TRUMBULL
TUSCARAWAS
39133
39135
39137
39139
39141
39143
39145
39147
39149
39151
39153
39155
39157
NORTH DAKOTA (38000)
38017
38019
38021
38023
38025
38027
38029
38031
38077
38079
38081
38083
38085
38087
GOLDEN VALLEY
GRAND FORKS
GRANT
GRIGGS
HETTINGER
KIDDER
LA MOURE
LOGAN
STARK
STEELE
STUTSMAN
TOWNER
TRAILL
WALSH
OHIO (39000)
C-14
39045
39047
39049
39051
39053
39055
39057
39059
39061
39063
39065
39067
39069
LICKING
LOGAN
LORAIN
LUCAS
MADISON
MAHONING
MARION
MEDINA
MEIGS
MERCER
MIAMI
MONROE
MONTGOMERY
CLINTON
39027
HIGHLAND
39071
MORGAN
39115
UN1ON
39159
39117
39119
39121
39123
39125
39127
39129
39131
VAN WERT
VINTON
WARREN
WASHINGTON
WAYNE
WILLIAMS
WOOD
WYANDOT
39161
39163
39165
39167
39169
39171
39173
39175
40081
40083
40085
40087
40089
40091
40093
40095
40097
40099
40101
40103
40105
40107
40109
40111
40113
40115
40117
40119
PITTSBURG
PONTOTOC
POTTAWATOMIE
PUSHMATAHA
ROGER MILLS
ROGERS
SEMINOLE
SEQUOYAH
STEPHENS
TEXAS
TILLMAN
TULSA
WAGONER
WASHINGTON
WASHITA
WOODS
WOODWARD
40121
40123
40125
40127
40129
40131
40133
40135
40137
40139
40141
40143
40145
40147
40149
40151
40153
41009
41011
41045
41047
41049
41051
41053
41055
41057
CROOK
CURRY
UMATILLA
UNION
WALLOWA
WASCO
WASHINGTON
WHEELER
YAMHILL
41013
41015
41059
41061
41063
41065
41067
41069
41071
42069
42071
42073
42075
42077
42079
42081
42083
42085
42087
42089
42091
42093
PIKE
POTTER
SCHUYLKILL
SNYDER
SOMERSET
SULLIVAN
SUSQUEHANNA
TIOGA
UNION
VENANGO
WARREN
WASHINGTON
WAYNE
42103
42105
42107
42109
42111
42113
42115
42117
42119
42121
42123
42125
42127
OHIO (39000) (Continued)
COLUMBIANA
COSHOCTON
CRAWFORD
CUYAHOGA
DARKE
DEFIANCE
DELAWARE
ERIE
39029
39031
39033
39035
39037
39039
39041
39043
HOCKING
HOLMES
HURON
JACKSON
JEFFERSON
KNOX
LAKE
LAWRENCE
ADAIR
ALFALFA
ATOKA
BEAVER
BECKHAM
BLAINE
BRYAN
CADDO
CANADIAN
CARTER
CHEROKEE
CHOCTAW
CIMARRON
CLEVELAND
COAL
COMANCHE
COTTON
CRAIG
CREEK
CUSTER
40001
40003
40005
40007
40009
40011
40013
40015
40017
40019
40021
40023
40025
40027
40029
40031
40033
40035
40037
40039
DELAWARE
DEWEY
ELLIS
GARFIELD
GARVIN
GRADY
GRANT
GREER
HARMON
HARPER
HASKELL
HUGHES
JACKSON
JEFFERSON
JOHNSTON
KAY
KINGFISHER
KIOWA
LATIMER
LE FLORE
BAKER
BENTON
DESCHUTES
DOUGLAS
GILLIAM
GRANT
HARNEY
HOOD RIVER
JACKSON
41001
41003
41017
41019
41021
41023
41025
41027
41029
CLACKAMAS
CLATSOP
JEFFERSON
JOSEPHINE
KLAMATH
LAKE
LANE
LINCOLN
LINN
ADAMS
ALLEGHENY
ARMSTRONG
BEAVER
BEDFORD
BERKS
BLAIR
BRADFORD
BUCKS
BUTLER
CAMBRIA
CAMERON
CARBON
42001
42003
42005
42007
42009
42011
42013
42015
42017
42019
42021
42023
42025
CLINTON
COLUMBIA
CRAWFORD
CUMBERLAND
DAUPHIN
DELAWARE
ELK
ERIE
FAYETTE
FOREST
FRANKLIN
FULTON
GREENE
39073
39075
39077
39079
39081
39083
39085
39087
MORROW
MUSKINGUM
NOBLE
OTTAWA
PAULDING
PERRY
PICKAWAY
PIKE
OKLAHOMA (40000)
40041
40043
40045
40047
40049
40051
40053
40055
40057
40059
40061
40063
40065
40067
40069
40071
40073
40075
40077
40079
LINCOLN
LOGAN
LOVE
MCCLAIN
MCCURTAIN
MCINTOSH
MAJOR
MARSHALL
MAYES
MURRAY
MUSKOGEE
NOBLE
NOWATA
OKFUSKEE
OKLAHOMA
OKMULGEE
OSAGE
OTTAWA
PAWNEE
PAYNE
OREGON (41000)
41005
41007
41031
41033
41035
41037
41039
41041
41043
COLUMBIA
COOS
MALHEUR
MARION
MORROW
MULTNOMAH
POLK
SHERMAN
TILLAMOOK
PENNSYLVANIA (42000)
42035
42037
42039
42041
42043
42045
42047
42049
42051
42053
42055
42057
42059
LACKAWANNA
LANCASTER
LAWRENCE
LEBANON
LEHIGH
LUZERNE
LYCOMING
MCKEAN
MERCER
MIFFLIN
MONROE
MONTGOMERY
MONTOUR
C-15
CENTRE
42027
HUNTINGDON
42061
NORTHAMPTON
42095
WESTMORELAND
42129
42097
42099
42101
WYOMING
YORK
42131
42133
45049
45051
45053
45055
45057
45059
45061
45063
45065
45067
45069
45071
OCONEE
ORANGEBURG
PICKENS
RICHLAND
SALUDA
SPARTANBURG
SUMTER
UNION
WILLIAMSBURG
YORK
45073
45075
45077
45079
45081
45083
45085
45087
45089
45091
46045
46047
46049
46051
46053
46055
46057
46059
46061
46063
46113
46115
46117
46119
46121
46123
46125
HUGHES
HUTCHINSON
HYDE
JACKSON
IERAULD
JONES
KINGSBURY
LAKE
LAWRENCE
LINCOLN
UNION
WALWORTH
YANKTON
ZIEBACH
46065
46067
46069
46071
46073
46075
46077
46079
46081
46083
46127
46129
46135
46137
47097
47099
47101
47103
47105
47107
47109
47111
47113
47115
47117
47119
47121
47123
ROANE
ROBERTSON
RUTHERFORD
SCOTT
SEQUATCHIE
SEVIER
SHELBY
SMITH
STEWART
SULLIVAN
SUMNER
TIPTON
TROUSDALE
UNICOI
47145
47147
47149
47151
47153
47155
47157
47159
47161
47163
47165
47167
47169
47171
PENNSYLVANIA (42000) (Continued)
CHESTER
CLARION
CLEARFELD
42029
42031
42033
INDIANA
JEFFERSON
JUNIATA
BRISTOL
KENT
44001
44003
NEWPORT
PROVIDENCE
ABBEVILLE
AIKEN
ALLENDALE
ANDERSON
BAMBERG
BARNWELL
BEAUFORT
BERKELEY
CALHOUN
CHARLESTON
CHEROKEE
CHESTER
45001
45003
45005
45007
45009
45011
45013
45015
45017
45019
45021
45023
CHESTERFELD
CLARENDON
COLLETON
DARLINGTON
DILLON
DORCHESTER
EDGEFIELD
FAIRFELD
FLORENCE
GEORGETOWN
GREENVILLE
GREENWOOD
AURORA
BEADLE
BENNETT
BON HOMME
BROOKINGS
BROWN
BRULE
BUFFALO
BUTTE
CAMPBELL
LYMAN
MCCOOK
MCPHERSON
MARSHALL
MEADE
MELLETTE
MINER
46003
46005
46007
46009
46011
46013
46015
46017
46019
46021
46085
46087
46089
46091
46093
46095
46097
CHARLES MIX
CLARK
CLAY
CORSON
CUSTER
DAVISON
DAY
DEUEL
DEWEY
DOUGLAS
MINNEHAHA
MOODY
PENNINGTON
PERKINS
POTTER
ROBERTS
SANBORN
ANDERSON
BEDFORD
BENTON
BLEDSOE
BLOUNT
BRADLEY
CAMPBELL
CANNON
CARROLL
CARTER
CHEATHAM
CHESTER
CLAIBORNE
CLAY
47001
47003
47005
47007
47009
47011
47013
47015
47017
47019
47021
47023
47025
47027
FENTRESS
FRANKLIN
GIBSON
GILES
GRAINGER
GREENE
GRUNDY
HAMBLEN
HAMILTON
HANCOCK
HARDEMAN
HARDIN
HAWKINS
HAYWOOD
42063
42065
42067
NORTHUMBERLAND
PERRY
PHILADELPHIA
RHODE ISLAND (44000)
44005
44007
WASHlNGTON
44009
SOUTH CAROLINA (45000)
45025
45027
45029
45031
45033
45035
45037
45039
45041
45043
45045
45047
HAMPTON
HORRY
JASPER
KERSHAW
LANCASTER
LAURENS
LEE
LEXINGTON
MCCORMICK
MARION
MARLBORO
NEWBERRY
SOUTH DAKOTA (46000)
46023
46025
46027
46031
46033
46035
46037
46039
46041
46043
46099
46101
46103
46105
46107
46109
46111
EDMUNDS
FALL RIVER
FAULK
GRANT
GREGORY
HAAKON
HAMLIN
HAND
HANSON
HARDING
SHANNON
SPINK
STANLEY
SULLY
TODD
TRIPP
TURNER
TENNESSEE (47000)
C-16
47049
47051
47053
47055
47057
47059
47061
47063
47065
47067
47069
47071
47073
47075
LAUDERDALE
LAWRENCE
LEWIS
LINCOLN
LOUDON
MCMINN
MCNAIRY
MACON
MADISON
MARION
MARSHALL
MAURY
MEIGS
MONROE
COCKE
47029
HENDERSON
47077
MONTGOMERY
47125
UNION
47173
47127
47129
47131
47133
47135
47137
47139
47141
47143
VAN BUREN
WARREN
WASHINGTON
WAYNE
WEAKLEY
WHITE
WILLIAMSON
WILSON
47175
47177
47179
47181
47183
47185
47187
47189
48189
48191
48193
48195
48197
48199
48201
48203
48205
48207
48209
48211
48213
48215
48217
48219
48221
48223
48225
48227
48229
48231
48233
48235
48237
48239
48241
48243
48245
48247
48249
48251
48253
48255
48257
48259
48261
48263
48265
48267
48269
48271
48273
48275
48277
48279
LA SALLE
LAVACA
LEE
LEON
LIBERTY
LIMESTONE
LIPSCOMB
LIVE OAK
LLANO
LOVING
LUBBOCK
LYNN
MCCULLOCH
MCLENNAN
MCMULLEN
MADISON
MARION
MARTIN
MASON
MATAGORDA
MAVERICK
MEDINA
MENARD
MIDLAND
MILAM
MILLS
MITCHELL
MONTAGUE
MONTGOMERY
MOORE
MORRIS
MOTLEY
NACOGDOCHES
NAVARRO
NEWTON
NOLAN
NUECES
OCHILTREE
OLDHAM
ORANGE
PALO PINTO
PANOLA
PARKER
PARMER
PECOS
POLK
48283
48285
48287
48289
48291
48293
48295
48297
48299
48301
48303
48305
48307
48309
48311
48313
48315
48317
48319
48321
48323
48325
48327
48329
48331
48333
48335
48337
48339
48341
48343
48345
48347
48349
48351
48353
48355
48357
48359
48361
48363
48365
48367
48369
48371
48373
TENNESSEE (47000) (Continued)
COFFEE
CROCKETT
CUMBERLAND
DAVIDSON
DECATUR
DE KALB
DICKSON
DYER
FAYETTE
47031
47033
47035
47037
47039
47041
47043
47045
47047
HENRY
HICKMAN
HOUSTON
HUMPHREYS
JACKSON
JEFFERSON
JOHNSON
KNOX
LAKE
ANDERSON
ANDREWS
ANGELINA
ARANSAS
ARCHER
ARMSTRONG
ATASCOSA
AUSTIN
BAILEY
BANDERA
BASTROP
BAYLOR
BEE
BELL
BEXAR
BLANCO
BORDEN
BOSQUE
BOWE
BRAZORIA
BRAZOS
BREWSTER
BRISCOE
BROOKS
BROWN
BURLESON
BURNET
CALDWELL
CALHOUN
CALLAHAN
CAMERON
CAMP
CARSON
CASS
CASTRO
CHAMBERS
CHEROKEE
CHILDRESS
CLAY
COCHRAN
COKE
COLEMAN
COLLIN
COLLINGSWORTH
COLORADO
COMAL
48001
48003
48005
48007
48009
48011
48013
48015
48017
48019
48021
48023
48025
48027
48029
48031
48033
48035
48037
48039
48041
48043
48045
48047
48049
48051
48053
48055
48057
48059
48061
48063
48065
48067
48069
48071
48073
48075
48077
48079
48081
48083
48085
48087
48089
48091
CONCHO
COOKE
CORYELL
COTTLE
CRANE
CROCKETT
CROSBY
CULBERSON
DALLAM
DALLAS
DAWSON
DEAF SMITH
DELTA
DENTON
DE WITT
DICKENS
DIMMIT
DONLEY
DUVAL
EASTLAND
ECTOR
EDWARDS
ELLIS
EL PASO
ERATH
FALLS
FANNIN
FAYETTE
FISHER
FLOYD
FOARD
FORT BEND
FRANKLIN
FREESTONE
FRIO
GAINES
GALVESTON
GARZA
GILLESPE
GLASSCOCK
GOLIAD
GONZALES
GRAY
GRAYSON
GREGG
GRIMES
47079
47081
47083
47085
47087
47089
47091
47093
47095
MOORE
MORGAN
OBION
OVERTON
PERRY
PICKETT
POLK
PUTNAM
RHEA
TEXAS (48000)
48095
48097
48099
48101
48103
48105
48107
48109
48111
48113
48115
48117
48119
48121
48123
48125
48127
48129
48131
48133
48135
48137
48139
48141
48143
48145
48147
48149
48151
48153
48155
48157
48159
48161
48163
48165
48167
48169
48171
48173
48175
48177
48179
48181
48183
48185
HALE
HALL
HAMILTON
HANSFORD
HARDEMAN
HARDIN
HARRIS
HARRISON
HARTLEY
HASKELL
HAYS
HEMPHILL
HENDERSON
HIDALGO
HILL
HOCKLEY
HOOD
HOPKINS
HOUSTON
HOWARD
HUDSPETH
HUNT
HUTCHINSON
IRION
JACK
JACKSON
JASPER
JEFF DAVIS
JEFFERSON
JIM HOGG
JIM WELLS
JOHNSON
JONES
KARNES
KAUFMAN
KENDALL
KENEDY
KENT
KERR
KIMBLE
KING
KINNEY
KLEBERG
KNOX
LAMAR
LAMB
C-17
COMANCHE
48093
GUADALUPE
48187
LAMPASAS
48281
POTTER
48375
48445
48447
48449
48451
48453
48455
48457
48459
48461
48463
48465
48467
48469
48471
48473
48475
48477
WEBB
WHARTON
WHEELER
WICHITA
WILBARGER
WILLACY
WILLIAMSON
WILSON
WINKLER
WISE
WOOD
YOAKUM
YOUNG
ZAPATA
ZAVALA
48479
48481
48483
48485
48487
48489
48491
48493
48495
48497
48499
48501
48503
48505
48507
49033
49035
49037
49039
49041
49043
49045
49047
UTAH
WASATCH
WASHINGTON
WAYNE
WEBER
49049
49051
49053
49055
49057
50009
50011
50025
50027
GRAND ISLE
LAMOILLE
50013
50015
TAZEWELL
WARREN
WASHINGTON
WESTMORELAND
WISE
WYTHE
YORK
ALEXANDRIA CITY
BEDFORD CITY
BRISTOL CITY
BUENA VISTA CITY
CHARLOTTESVILLE
CITY
CHESAPEAKE CITY
CLIFTON FORGE
CITY
COLONIAL HEIGHTS
CITY
COVINGTON CITY
DANVILLE CITY
EMPORIA CITY
FAIRFAX CITY
FALLS CHURCH CITY
51185
51187
51191
51193
51195
51197
51199
51510
51515
51520
51530
51540
TEXAS (48000) (Continued)
PRESIDIO
RAINS
RANDALL
REAGAN
REAL
RED RIVER
REEVES
REFUGIO
ROBERTS
ROBERTSON
ROCKWALL
RUNNELS
RUSK
SABINE
SAN AUGUSTINE
SAN JACINTO
SAN PATRICIO
48377
48379
48381
48383
48385
48387
48389
48391
48393
48395
48397
48399
48401
48403
48405
48407
48409
SAN SABA
SCHLEICHER
SCURRY
SHACKELFORD
SHELBY
SHERMAN
SMITH
SOMERVELL
STARR
STEPHENS
STERLING
STONEWALL
SUTTON
SWISHER
TARRANT
TAYLOR
TERRELL
48411
48413
48415
48417
48419
48421
48423
48425
48427
48429
48431
48433
48435
48437
48439
48441
48443
TERRY
THROCKMORTON
TITUS
TOM GREEN
TRAVIS
TRINITY
TYLER
UPSHUR
UPTON
UVALDE
VAL VERDE
VAN ZANDT
VICTORIA
WALKER
WALLER
WARD
WASHINGTON
BEAVER
BOX ELDER
CACHE
CARBON
DAGGETT
DAVIS
DUCHESNE
EMERY
49001
49003
49005
49007
49009
49011
49013
49015
GARFIELD
GRAND
IRON
JUAB
KANE
MILLARD
MORGAN
PIUTE
ADDISON
BENNINGTON
ORANGE
ORLEANS
50001
50003
50017
50019
CALEDONIA
CHITTENDEN
RUTLAND
WASHlNGTON
ACCOMACK
ALBEMARLE
ALLEGHANY
AMELIA
AMEERST
APPOMATTOX
ARLINGTON
AUGUSTA
BATH
BEDFORD
BLAND
BOTETOURT
51001
51003
51005
51007
51009
51011
51013
51015
51017
51019
51021
51023
FAUQUIER
FLOYD
FLUVANNA
FRANKLIN
FREDERICK
GILES
GLOUCESTER
GOOCHLAND
GRAYSON
GREENE
GREENSVILLE
HALIFAX
51061
51063
51065
51067
51069
51071
51073
51075
51077
51079
51081
51083
MIDDLESEX
MONTGOMERY
NELSON
NEW KENT
NORTHAMPTON
NORTHUMBERLAND
NOTTOWAY
ORANGE
PAGE
PATRICK
PITTSYLVANIA
POWHATAN
51119
51121
51125
51127
51131
51133
51135
51137
51139
51141
51143
51145
BRUNSWICK
BUCHANAN
51025
51027
HANOVER
HENRICO
51085
51087
PRINCE EDWARD
PRINCE GEORGE
51147
51149
BUCKINGHAM
51029
HENRY
51089
PRINCE WILLIAM
51153
CAMPBELL
CAROLINE
CARROLL
CHARLES CITY
CHARLOTTE
51031
51033
51035
51036
51037
HIGHLAND
ISLE OF WIGHT
JAMES CITY
KING AND QUEEN
KING GEORGE
51091
51093
51095
51097
51099
PULASKI
RAPPAHANNOCK
RICHMOND
ROANOKE
ROCKBRIDGE
51155
51157
51159
51161
51163
UTAH (49000)
49017
49019
49021
49023
49025
49027
49029
49031
RICH
SALT LAKE
SAN JUAN
SANPETE
SEVER
SUMMIT
TOOELE
UINTAH
VERMONT (50000)
50005
50007
50021
50023
ESSEX
FRANKLIN
WINDHAM
WINDSOR
VIRGINIA (51000)
C-18
51550
51560
51570
51580
51590
51595
51600
51610
CHESTERFIELD
51041
KING WILLIAM
51101
ROCKINGHAM
51165
FRANKLIN CITY
51620
FREDERICKSBURG
CITY
GALAX CITY
HAMPTON CITY
HARRISONBURG
CITY
HOPEWELL CITY
LEXINGTON CITY
LYNCHBURG CITY
SUFFOLK CITY
VIRGINIA BEACH
CITY
WAYNESBORO CITY
51630
VIRGINIA (51000) (Continued)
CLARKE
51043
LANCASTER
51103
RUSSELL
51167
CRAIG
CULPEPER
CUMBERLAND
51045
51047
51049
LEE
LOUDOUN
LOUISA
51105
51107
51109
SCOTT
SHENANDOAH
SMYTH
51169
51171
51173
DICKENSON
DINWIDDE
ESSEX
FAIRFAX
MANASSAS CITY
51051
51053
51057
51059
51683
LUNENBURG
MADISON
MATLEWS
MECKLENBURG
POQUOSON CITY
51111
51113
51115
51117
51735
SOUTHAMPTON
SPOTSYLVANIA
STAFFORD
SURRY
RICHMOND CITY
51175
51177
51179
51181
51760
NEWPORT NEWS
CITY
NORFOLK CITY
51700
PORTSMOUTH CITY
51740
ROANOKE CITY
51770
51710
RADFORD CITY
51750
SALEM CITY
51775
NORTON CITY
PETERSBURG CITY
51720
51730
MANASSAS PARK CITY
MARTINSVILLE CITY
51685
51690
STAUNTON CITY
SUSSEX
51790
51183
ADAMS
ASOTIN
BENTON
CHELAN
CLALLAM
CLARK
COLUMBIA
COWLITZ
DOUGLAS
FERRY
53001
53003
53005
53007
53009
53011
53013
53015
53017
53019
FRANKLIN
GARFIELD
GRANT
GRAYS HARBOR
ISLAND
JEFFERSON
KING
KITSAP
KITTITAS
KLICKITAT
BARBOUR
BERKELEY
BOONE
BRAXTON
BROOKE
CABELL
CALHOUN
CLAY
DODDRIDGE
FAYETTE
GILMER
GRANT
GREENBRIER
HAMPSHIRE
54001
54003
54005
54007
54009
54011
54013
54015
54017
54019
54021
54023
54025
54027
HANCOCK
HARDY
HARRISON
JACKSON
JEFFERSON
KANAWHA
LEWIS
LINCOLN
LOGAN
MCDOWELL
MARION
MARSHALL
MASON
MERCER
ADAMS
ASHLAND
BARRON
BAYFELD
BROWN
BUFFALO
BURNETT
CALUMET
CHIPPEWA
55001
55003
55005
55007
55009
55011
55013
55015
55017
FLORENCE
FOND DU LAC
FOREST
GRANT
GREEN
GREEN LAKE
IOWA
IRON
JACKSON
51640
51650
51660
51670
51678
51680
51800
51810
51820
WILLIAMSBURG
CITY
WINCHESTER CITY
51830
53041
53043
53045
53047
53049
53051
53053
53055
53057
53059
SNOHOMISH
SPOKANE
STEVENS
THURSTON
WAHKIAKUM
WALLA WALLA
WHATCOM
WHITMAN
YAKIMA
53061
53063
53065
53067
53069
53071
53073
53075
53077
54057
54059
54061
54063
54065
54067
54069
54071
54073
54075
54077
54079
54081
54083
RITCHE
ROANE
SUMMERS
TAYLOR
TUCKER
TYLER
UPSHUR
WAYNE
WEBSTER
WETZEL
WIRT
WOOD
WYOMING
54085
54087
54089
54091
54093
54095
54097
54099
54101
54103
54105
54107
54109
55073
55075
55077
55078
55079
55081
55083
55085
55087
RUSK
SA1NT CROIX
SAUK
SAWYER
SHAWANO
SHEBOYGAN
TAYLOR
TREMPEALEAU
VERNON
55107
55109
55111
55113
55115
55117
55119
55121
55123
51840
WASHINGTON (53000)
53021
53023
53025
53027
53029
53031
53033
53035
53037
53039
LEWIS
LINCOLN
MASON
OKANOGAN
PACIFIC
PEND OREILLE
PIERCE
SAN JUAN
SKAGIT
SKAMANIA
WEST VIRGINIA (54000)
54029
54031
54033
54035
54037
54039
54041
54043
54045
54047
54049
54051
54053
54055
MINERAL
MINGO
MONONGALIA
MONROE
MORGAN
NICHOLAS
OHIO
PENDLETON
PLEASANTS
POCAHONTAS
PRESTON
PUTNAM
RALEIGH
RANDOLPH
WISCONSIN (55000)
55037
55039
55041
55043
55045
55047
55049
55051
55053
MARATHON
MARINETTE
MARQUETTE
MENOMINEE
MILWAUKEE
MONROE
OCONTO
ONEIDA
OUTAGAMIE
C-19
CLARK
COLUMBIA
55019
55021
JEFFERSON
JUNEAU
55055
55057
CRAWFORD
DANE
DODGE
DOOR
DOUGLAS
DUNN
EAU CLAIRE
55023
55025
55027
55029
55031
55033
55035
KENOSHA
KEWAUNEE
LA CROSSE
LAFAYETTE
LANGLADE
LINCOLN
MANITOWOC
ALBANY
BIG HORN
CAMPBELL
CARBON
CONVERSE
CROOK
56001
56003
56005
56007
56009
56011
FREMONT
GOSHEN
HOT SPRINGS
JOHNSON
LARAMIE
LlNCOLN
OZAUKEE
PEPIN
55089
55091
VILAS
WALWORTH
55125
55127
55093
55095
55097
55099
55101
55103
55105
WASHBURN
WASHINGTON
WAUKESHA
WAUPACA
WAUSHARA
WINNEBAGO
WOOD
55129
55131
55133
55135
55137
55139
55141
56025
56027
56029
56031
56033
56035
SWEETWATER
TETON
UINTA
WASHAKIE
WESTON
56037
56039
56041
56043
56045
WISCONSIN (55000) (Continued)
55059
55061
55063
55065
55067
55069
55071
PIERCE
POLK
PORTAGE
PRICE
RACINE
RICHLAND
ROCK
WYOMING (56000)
C-20
56013
56015
56017
56019
56021
56023
NATRONA
NIOBRARA
PARK
PLAITE
SHERIDAN
SUBLETTE
APPENDIX C
PART B - U. S. TERRITORIES FIPS CODES
AMERICAN SAMOA (60000)
EASTERN
WESTERN
60010
60050
MANUA
60020
CHUUK
64002
KOSRAE
GUAM
66010
AILlNGINAE
AILINGLAPLAP
AILUK
68007
68010
68030
ENEWETAK
ERIKUB
JABAT
68090
68100
68110
ARNO
AUR
BIKAR
BIKINI
BOKAK
68040
68050
68060
68070
68073
JALUIT
JEMO
KILI
KWAJALEIN
LAE
EBON
68080
LIB
NORTHERN ISLAND
69085
ROTA
AIMELIIK
AIRAI
ANGAUR
HATOBOHEI
70002
70004
70010
70050
KAYANGEL
KOROR
MELEKEOK
NGARAARD
ADJUNTAS
AGUADA
AGUADILLA
72001
72003
72005
CIDRA
COAMO
COMERIO
72041
72043
72045
AGUAS BUENAS
AIBONITO
ANASCO
ARECIBO
ARROYO
BARCELONETA
72007
72009
72011
72013
72015
72017
COROZAL
CULEBRA
DORADO
FAJARDO
FLORIDA
GUANICA
BARRANQUITAS
BAYAMON
CABO ROlO
CAGUAS
CAMUY
72019
72021
72023
72025
72027
CANOVANAS
CAROLINA
CATANO
CAYEY
CEIOA
CIALES
ROSE ISLAND
60030
SWAINS ISLAND
60040
64040
YAP
64060
LIKIEP
MAJURO
MALOELAP
68180
68190
68300
TOKE
UJAE
UJELANG
68385
68390
68400
68120
68130
68140
68150
68160
MEJIT
MILI
NAMORIK
NAMU
RONGELAP
68310
68320
68330
68340
68350
UTRIK
WOTHO
WOTJE
68410
68420
68430
68170
RONGRIK
68360
69110
TINIAN
69120
70218
70222
70224
70226
NGEREMLENGUI
NGIWAL
PELELIU
SONSOROL
70227
70228
70350
70370
LAJAS
LARES
LAS MARIAS
72079
72081
72083
RIO GRANDE
SABANA GRANDE
SALINAS
72119
72121
72123
72047
72049
72051
72053
72054
72055
LAS PEDRAS
LOIZA
LUQUILLO
MANATI
MARICAO
MAUNABO
72085
72087
72089
72091
72093
72095
SAN GERMAN
SAN JUAN
SAN LORENZO
SAN SEBASTIAN
SANTA ISABEL
TOA ALTA
72125
72127
72129
72131
72133
72135
GUAYAMA
GUAYANILLA
GUAYNABO
GURABO
HATILLO
72057
72059
72061
72063
72065
MAYAGUEZ
MOCA
MOROVIS
NAGUABO
NARANJITO
72097
72099
72101
72103
72105
TOA BAIA
TRUJILLO ALTO
UTUADO
VEGA ALTA
VEGA BAJA
72137
72139
72141
72143
72145
72029
72031
72033
72035
72037
HORMIGUEROS
HUMACAO
ISABELA
JAYUYA
JUANA DIAZ
72067
72069
72071
72073
72075
OROCOVIS
PATILLAS
PENUELAS
PONCE
QUEBRADILLAS
72107
72109
72111
72113
72115
VIEQUES
VILLALBA
YABUCOA
YAUCO
72147
72149
72151
72153
72039
JUNCOS
72077
RINCON
72117
FEDERATED STATES OF MICRONESIA (64000)
64005
POHNPEI
GUAM 66000
MARSHALL ISLANDS (68000)
NORTHERN MARIANA ISLANDS (69000)
69100
SAIPAN
PALAU (70000)
70100
70150
70212
70214
NGARCHELONG
NGARDMAU
NGATPANG
NGCHESAR
PUERTO RICO (72000)
C-21
U.S. MINOR OUTLYING ISLANDS (74000)
BAKER ISLAND
HOWLAND ISLAMD
JARVIS ISLAND
74050
74100
74150
ST. CROIX
78010
JOHNSTON ISLAND
KINGMAN REEF
MIDWAY ISLANDS
74200
74250
74300
NAVASSA ISLAND
PALMYRA ATOLL
WAKE ISLAND
74350
74400
74450
VIRGIN ISLANDS OF THE UNITED STATES (78000)
ST. JOHN
78020
ST. THOMAS
78030
PART C - U. S. OFFSHORE (MARINE AREAS) FIPS CODES
OFFSHORE (MARINE AREAS)
EASTERN NORTH PACIFIC OCEAN, AND ALONG U.S. WEST COAST FROM CANADIAN BORDER TO MEXICAN BORDER
57000
NORTH PACIFIC OCEAN NEAR ALASKA, AND ALONG ALASKA COASTLINE, INCLUDING THE BERING SEA AND THE GULF OF
ALASKA
58000
CENTRAL PACIFIC OCEAN, INCLUDING HAWAIIAN WATERS
59000
SOUTH CENTRAL PACIFIC OCEAN, INCLUDING AMERICAN SAMOA WATERS
61000
WESTERN PACIFIC OCEAN, INCLUDING MARIANA ISLAND WATERS
65000
WESTERN NORTH ATLANTIC OCEAN, AND ALONG U.S. EAST COAST, FROM CANADIAN BORDER SOUTH TO CURRITUCK BEACH
LIGHT, N.C.
73000
WESTERN NORTH ATLANTIC OCEAN, AND ALONG U.S. EAST COAST, SOUTH OF CURRITUCK BEACH LIGHT, N.C., FOLLOWING
THE COASTLINE INTO GULF OF MEXICO TO BONITA BEACH, FL.,, INCLUDING THE CARIBBEAN GULF OF MEXICO, AND ALONG
THE U.S. GULF COAST FROM THE MEXICAN BORDER TO BONITA BEACH, FL.
75000
LAKE SUPERIOR
91000
LAKE MICHIGAN
92000
LAKE HURON
93000
LAKE ST. CLAIR
94000
LAKE ERIE
96000
LAKE ONTARIO
97000
ST. LAWRENCE RIVER ABOVE ST REGIS
98000
C-22
APPENDIX D
MENU LISTINGS
EAS911+ Setup Menu
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
Set Current Date/Time
Set Station Time Zone
Daylight Saving?
Set Station ORG Code
Set Station FIPS Code
Set Station Identification Code
Set Attention Signal Duration
Change Primary Password
Change Setup Password
Select Events to Auto Forward
Add Locations to Auto Forward
Verify or Delete Locations to Auto Forward
Assign, Change or Verify Encoder Event Keys
Assign or Re-assign Encoder Location Keys
Verify/Edit Encoder Location Key Assignment
Enable Internal Voice Recorder
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
Set Remote Sign Protocol
Enable Char Gen Interface
Remote Interface Definition
Set LCD Contrast
Record Voice Announcement
Verify Voice Announcement
Enable Remote Control/Status Module Interface
Set One-Button Weekly Test Option
Set Alert Timeout
Set One-Button Manual Forward
Enable C.G. Text For RWT
Set Auto Mode Timer
Record Alert Voice Message
Verify Alert Voice Message
Set Random Required Weekly Test
Set Transmit Delay Time
EAS911+ Operation Menu
1.
2.
3.
4.
5.
6.
7.
8.
9.
Review Received Messages
Review Transmitted Messages
Test On-Air Relay
Test Alert Relay
Set Output Level: On-Air Relay Open
Set Output Level: On-Air Relay Closed
Set Printer Operation
Set Message Hold
Mark/Space Calibration
EAS911+ Help Menu
10. Password Help
101. Access to Encoder
102. Access to Setup Menu
103. To Change Passwords
104. Password Lost
20. Encoder Operation Help
201. To Originate Weekly Test
202. To Originate Monthly Test
203. To Originate an Alert
204. To Encode an Event
205. To Encode Locations
206. To Encode Event Duration
207.
208.
209.
210.
To Practice Encoding
To Send Header
To Review Transmit Message Log
To Test On-Air Relay
30. Decoder Operation Help
301. To Acknowledge a New Message
302. To Change Between Automatic and Manual Mode
303. To Manual Forward a Message
304. To Review Received Message Log
40. Audio/Printer Operation Help
401. To Set Output Level On-Air
402. To Set Output Level Off-Air
403. Speaker Volume Adjustment
404.
To Print Screen
50. Encoder Setup Help
501.
To Set Current Date/Time
502.
To Set Station Time Zone
503.
Daylight Saving?
504.
To Set Station Originator Code
505.
To Set Station FIPS Code
506.
507.
508.
509.
510.
To Set Station Identification Code
To Set Attention Signal Duration
To Assign, Change or Verify Encoder Event Keys
To Assign or Re-assign Encoder Location Keys
To Verify Encoder Location Key Assignment
60. Decoder Setup Help
601.
To Select Events to Auto Forward
602.
To Add Locations to Auto Forward
603.
To Verify or Delete Locations to Auto Forward
70. Accessory Setup Help
701.
To Enable Character Generator Interface
702.
703.
704.
705.
706.
Voice Recorder Status
To Set Electronic Sign Protocol
Record Voice Announcement
To Verify Voice Announcement
To Enable CPU Interface
707.
708.
To Install Program Interrupt Unit
To Enable Remote Control Status Modules
80. Maintenance and Technical Support Help
801.
To Replace Printer Paper
803.
TFT Customer Service
D-1
APPENDIX E
(NOT USED)
APPENDIX F
ORIGINATOR AND EVENT CODE TRANSLATIONS
Originator codes:
ORG.
Code
English Translation
EAS
EAN
Broadcast Station or Cable System
National Emergency Action Notification
Network
CIV Civil Authority
WXR The National Weather Service
PEP Primary Entry Point
Event
Code
English Translation
EAS 943
Event
Code No.
EAN
EAT
NIC
NPT
ADR
AVA
AVW
BZW
CAE
CDW
CEM
CFA
CFW
DSW
EQW
EVI
FRW
FFA
FFW
FFS
FLA
FLW
FLS
HMW
HWA
HWW
National Emergency Action Notification
National Emergency Action Termination
National Information Center Message
National Periodic Test
Administrative Message
Avalanche Watch
Avalanche Warning
Blizzard Warning
Child Abduction Emergency
Civil Danger Warning
Civil Emergency Message
Coastal Flood Watch
Coastal Flood Warning
Dust Storm Warning
Earthquake Warning
Immediate Evacuation Notice
Fire Warning
Flash Flood Watch
Flash Flood Warning
Flash Flood Statement
Flood Watch
Flood Warning
Flood Statement
Hazardous Materials Warning
High Wind Watch
High Wind Warning
N/A
N/A
N/A
N/A
10
11
12
13
14
15
16
17
18
19
20
21
22
Event
Code
HUA
HUW
HLS
LEW
LAE
NMN
TOE
NUW
DMO
RHW
RMT
RWT
SVA
SVR
SVS
SPW
SMW
SPS
TOA
TOR
TRA
TRW
TSA
TSW
VOW
WSA
WSW
English Translation
Hurricane Watch
Hurricane Warning
Hurricane Statement
Law Enforcement Warning
Local Area Emergency
Network Message Notification
911 Telephone Outage Emergency
Nuclear Power Plant Warning
Practice/Demo Warning
Radiological Hazard Warning
Required Monthly Test
Required Weekly Test
Severe Thunderstorm Watch
Severe Weather Warning
Severe Weather Statement
Shelter in Place Warning
Special Marine Warning
Special Weather Statement
Tornado Watch
Tornado Warning
Tropical Storm Watch
Tropical Storm Warning
Tsunami Watch
Tsunami Warning
Volcano Warning
Winter Storm Watch
Winter Storm Warning
EAS 943
Event
Code No.
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
F-1
APPENDIX G
GLOSSARY OF EAS911+ TERMS
TERM
EXPLANATION
Attention Signal
Auto Forward
The former two-tone EBS signal of 853 Hz and 960 Hz.
The act of automatically retransmitting or relaying an EAS message without operator intervention
whenever the EAS911+ is set to Auto Mode and the EVENT and FIPS codes of a valid received
message match those Events and FIPS codes set by the setup menu for Auto Forwarding.
Banner Mode
The normal, standby condition of the EAS911+ in which the date and time are displayed in the LCD
screen.
COM port
Communications Port, or connector, on the rear panel of the EAS911+, which connects and enables
various external devices
The valid time period of an EAS event, e.g. "A tornado watch for the next 3 hours." In this case, "3
hours" is the duration.
Emergency Alert System or the originator field code for a broadcast station or cable system in an
EAS message
End-of-Message; the FSK signal ("nnnn") sent at the end of an EAS message
Federal Information Processing Identifier, a unique five-digit number for every county, parish,
borough, or census district in the US and its possessions
The fields of the EAS protocol: sync, ORG, EVENT, LOCATION (FIPSs), Duration, Date/Time
Stamp, and Station ID; the FSK signal that consists of the header
Liquid Crystal Display
The state of operation of the EAS911+, i.e. Manual Forward Mode or Automatic Forward Mode
National Oceanagraphic and Atmospheric Administration, a branch of the Commerce
Department
Duration
EAS
EOM
FIPS
Header
LCD
Mode
NOAA
ORG
Password
Subdivision
Originator, field in an EAS message, e.g. WXR-National Weather Service, CIV-Civil Authority
The 3-digit number that must be entered after pressing the "PASSWORD" key to gain operator or
setup access to the EAS911+
Printed Circuit Board
The 3-digit code used by the station operator.
(same as Banner Mode)
An EIA electrical interface standard that is used for connections between the EAS911+ and an EAS
941A Remote Control/Status Module
The 3-digit code used by the station owner/manager/engineer to setup and change the basic
operation of the EAS911+
The call sign of the broadcast station at which this EAS911+ is located, e.g. "KTFT/AM"; the cable
system identifier, e.g. "CA0233 ".
One-ninth parts of a county, parish, borough, or census district or US possession
SAME
Specific Area Message Encoding
PCB
Primary Password
Ready Mode
RS-485
Setup Password
Station ID
G-1
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Page Count : 82 Has XFA : No XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:78d6b443-ccd3-4b99-9dfe-ea2ec4f7d65b Modify Date : 2013:01:24 16:56:38-08:00 Create Date : 2013:01:24 16:56:37-08:00 Metadata Date : 2013:01:24 16:56:38-08:00 Document ID : uuid:944f4266-3161-410f-9f11-1ce6bd751f9a Format : application/pdf Creator : Adobe Acrobat 6.0 Producer : Adobe Acrobat 6.0EXIF Metadata provided by EXIF.tools