4iiii Innovations VBLE HEART RATE MONITOR STRAP transmitting the 2.4G through Bluetooth (BLE) and ANT+. User Manual II
4iiii Innovations Inc. HEART RATE MONITOR STRAP transmitting the 2.4G through Bluetooth (BLE) and ANT+. II
Contents
- 1. User Manual
- 2. User Manual II
User Manual II
MZ-3 HEART RATE MONITOR
Model Number VBLE
Step 1
Wear your belt
Wearing your MZ-3 Belt is easy and comfortable. Position the belt so that the center piece is directly
below your chest, on top of your sternum.
Step 2
Exercise Anywhere
Whether you're in the gym watching your live feed, or out on the street viewing your tile through the
MYZONE App, you can rest assured you're earning MEPs and tracking your effort anywhere you go.
Step 3
Monitor your results
By logging in to your MYZONE account on your computer or through the MYZONE App, you'll be
able to see minute-by-minute breakdowns of your exercise effort. Track your progress over time to
gain more understanding about your workout habits.
Step 4
Challenge, share, compare
With built-in leaderboards, status rankings, and social integration, we've made it easier than ever to
show off your progress. Meet World Health Organization standards every month to rank up and pass
your friends.
IMPORTANT INFORMATION ON USE OF THE MYZONE
BELT
Product Use
WARNING
Strenuous exercise can be dangerous for persons suffering from many medical
conditions.
If you are in any doubt (and in any event if you are pregnant, or receiving medical
treatment or medication) you should refrain from taking any such exercise - with or
without your product - without first taking competent medical advice.
Your MYZONE belt is designed only as an aid to personal training / exercise. IT IS
NOT A MEDICAL DEVICE. It cannot tell you what level of exercise is safe for you,
or whether you are exerting yourself beyond your safe limits. You should
therefore take particular care if you are undertaking exercise in a group / class
environment and are following the instructions provided by a physical instructor
or trainer. It is your responsibility to check your own medical condition before
undertaking any exercise.
If chest pains or any other symptoms or discomfort are experienced when using the
MYZONE belt, you should stop exercising immediately and seek medical attention.
MYZONE personnel are not medically qualified, and MYZONE cannot and does not
give medical advice.
IMPORTANT: MYZONE uses a formula (HR MAX = 207.3 − (0.711 × age)) derived by
Londeree and Moeschberger (University of Missouri) to establish your age-predicted
maximum heart rate (HR MAX). This is based on population norms and is not accurate
for everyone. Your HR MAX setting will be adjusted and increased if samples of your
heart rate data indicate the formula could be inappropriate for you. However, the
MYZONE system is not a replacement for an accurate heart rate test conducted by a
trained professional. If you exercise and follow your level of effort depicted in a
MYZONE color-coded tile you must always consider the warning above as your tile
color and percentage of your HR MAX may be incorrect. Your facility can manually
readjust your HR MAX setting for you.
The MYZONE belt must at all times be used in accordance with MYZONE product use
& care instructions.
Operation and Use of the Myzone Belt:
To register a MYZONE belt you will require a facility code. If you have purchased your
belt directly from MYZONE we will allocate a facility code to you. If you have not
purchased your belt from MYZONE a facility code will be issued by the facility that
supplied your belt. It should be noted that a belt cannot be transferred from one facility
for use at another facility without the agreement of both facilities. You are responsible
for obtaining and supplying MYZONE with confirmation of such agreement.
Although a MYZONE belt is capable of operating as a standalone device, if you wish to
store data in your MYZONE account you will require a facility code and an online user
account.
Belts can only be registered in respect of one facility or (at the discretion of the facility
operator) one chain of associated facilities at any given time.
Product Support
You will need to register your MYZONE belt before you can use it. Registration will
allow you to receive support for your MYZONE belt. You can find details of the support
and warranty services at www.myzone.org. The support services offered may change
over time – we recommend you check the support available by visiting www.myzone.org
from time to time. This does not affect your statutory rights.
To register your MYZONE belt, we will need to collect and store some personal
information about you. All personal information we gather about you will be handled in
accordance with our Privacy Policy.
Different countries or states often have their own laws controlling the collection of
personal information from children or young people online (for example, the Children's
Online Privacy Protection Act or COPPA in the US) so, depending on your age, you
may need a parent or legal guardian to provide their consent, or even to register your
MYZONE belt for you.
Model Number VBLE
FCC STATEMENT FCC ID: ZZNVBLE
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received, including interference
that may cause undesired operation.
The grantee is not responsible for any changes or modifications not expressly approved by the
party responsible for compliance. Such modifications could void the user’s authority to operate
the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
Model Number VBLE
IC Statement IC:9896A-VBLE
This device complies with Industry Canada licence‐exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation
of the device.
CAN ICES-3(B)/NMB-3(B)
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) il ne doit pas
produire de brouillage et (2) l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage
radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fomctionnement
du dispositif. CAN ICES-3(B)/NMB-3(B)
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102
and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF
exposure and compliance.
Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de
RSS 102 et la conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information
canadienne sur l'exposition et la conformité de rf.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter. This equipment should be installed and operated with a distance of less than 5mm
between the radiator and the body.
Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps qu'aucune autre
antenne ou émetteur. Cet equipment devrait étre installé et actionné avec une distance moins
de 5 millimètres entre le radiateur et votre corps.