ACE CAD Enterprise BTX-100 DigiMemo Bluetooth Transmitter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1058036
Application ID	7EtJKJwbLR47TjCZsbvcBA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	22.82kB (285291 bits)
Date Submitted	2009-01-19 00:00:00
Date Available	2009-01-19 00:00:00
Creation Date	2009-01-19 11:10:42
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2009-01-19 11:10:42
Document Title	untitled

Simple Guide for DigiMemo Express in Windows Mobile
Install the DigiMemo Express Software in your Smartphone
1. Install the Microsoft ActiveSync software that comes with your Smartphone on the computer
before connecting your Smartphone to the computer.
2. Connect your Smartphone to the computer via USB port.
3. Copy the installation file “MobileSetup.CAB” of the DigiMemo Express Software (in the CD)
into My Documents folder in your Smartphone. (as Pic. 1 ~ Pic. 3)
4. In File Manager of your Smartphone, open My Documents folder. (as Pic. 4)
5. Select the “MobileSetup.CAB” to install the DigiMemo Express software in your Smartphone.
6. After the installation is finished, the DigiMemo Express icon will appear on Start in your
Smartphone. (as Pic. 5)
Page: 1
22 December 2008
Simple Guide for DigiMemo Express in Windows Mobile
Paring the DigiMemo Bluetooth Transmitter (BTX-100) with your
Smartphone
Activate DigiMemo Bluetooth Transmitter (BTX-100) to enter pairing mode
1. Plug the Bluetooth Transmitter (BTX-100) into the USB connector of DigiMemo.
2. Press and hold the Power button on DigiMemo about 5 seconds.
3. You can see the LED of BTX-100 blinking quickly.
To pare the BTX-100 with your Smartphone, execute the following procedures:
Note: The following procedures and screen shots are just for example. As the Bluetooth operation
vary from different phones, please refer to your phone manual on how to pare with a Bluetooth
device.
1. Turn the Bluetooth on. (as Pic. 6)
2. View ‘Paired Devices’ and select Add. (as Pic. 7)
3. After the searching is finished, select the “BTX-100”. (as Pic. 8)
4. Enter the passkey “0000”. (as Pic. 9)
Page: 2
22 December 2008
Simple Guide for DigiMemo Express in Windows Mobile
Using the DigiMemo Express software on your Smartphone
After pairing, select the “DigiMemo Express” icon on Start to open the DigiMemo Express
software in Smartphone. (as following screen shots)
Now you can use the Bluetooth Transmitter (BTX-100) to transmit your handwritten notes from
DigiMemo to your Smartphone.
Page: 3
22 December 2008
Simple Guide for DigiMemo Express in Windows Mobile
Specifications
Specifications of BTX-100
Size
24.7 mm (width) x 41.0 mm (length) x 7.6 mm
Weight
7.6g
DC Power Source
DC 3.3v, Supplied from DigiMemo USB port when connecting.
AC Power Source
No
Interface to PC
Mini-USB port
Note!
This device only apply with DigiMemo L2 or DigiMemo A402.
System Requirements
Equipment
SmartPhone (Symbian OS or Windows Mobile)
Equipment
ACECAD DigiMemo A402/L2
Environment
Operating Temperature
0 °C to 40 °C (32 °F to 104 °F)
Operating Humidity
Less than 85% (no condensation)
Storage Temperature
-20 °C to 60 °C (-4 °F to 140 °F)
Note!
These specifications are subject to change without notice.
Federal Communications Commission (FCC) Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
The user should not modify or change this device without written approval from ACE CAD Enterprise Co., Ltd. Modification
could void authority to use this equipment.
Trademark Information
ACECAD and ACECAT are registered trademarks of ACE CAD Enterprise Co., Ltd.
Microsoft, Windows, Office and OneNote are registered trademarks of Microsoft Corporation.
Pentium is a registered trademark of Intel Corporation.
Internet is a trademark of Digital Equipment Corporation.
Adobe and Acrobat are registered trademarks of Adobe Systems Inc.
All other trademarks are the property of their respective owners.
Copyright Notice
©2008 ACE CAD Enterprise Co., Ltd. All rights reserved. No part of this publication may be reproduced, stored in a retrieval
system, or transmitted, in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise),
without the prior written permission of the publisher.
Page: 4
22 December 2008

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Modify Date                     : 2009:01:19 11:10:42+08:00
Create Date                     : 2009:01:19 11:10:42+08:00
Format                          : application/pdf
Title                           : untitled
Document ID                     : uuid:6bdc0a46-b3e6-41ab-8a41-d1aaed699c8c
Instance ID                     : uuid:26590164-23fb-4755-834e-305c0e7c92e3
Page Count                      : 4

EXIF Metadata provided by EXIF.tools