ACOUSTMAX MNGLOS Monster GLO User Manual Monster Glow UserManual

ACOUSTMAX INTERNATIONAL CO., LTD Monster GLO Monster Glow UserManual

UserManual

Please Call:Please do not return thisproduct to the store.FOR QUESTIONSOR TECHNICALSUPPORT1-800-976-0877Weather ResistantLantern SpeakerCONNECT 8SPEAKERS WIRELESSLY Additional speakerssold separately
TABLE OF CONTENTSWarning & FCC StatementSafety InstructionsNew FeaturesUnpackingSpeaker ComponentGetting StartedCharging Battery3.5 MM Aux InputBluetooth Connection NFC ConnectionEZ-Play Wireless ConnectionSpecificationsLimited Warranty345556666 677-892
WARNINGA lightning flash and arrowhead within an equilateral triangle denotes the presence of insulated “dangerous voltage” within the product’s enclosure. The voltage may be of sufficient magnitude to constitute a risk of electric shock to persons who come into contact with it.An exclamation point within an equilateral triangle denotes the presence of important operation & maintenance/service instructions.FCC WARNING STATEMENTPREVENT FIRE AND SHOCK HAZARDS. DO NOT USE EXTENSION CORDS OR OUTLETS THAT EXPOSE PLUG BLADES. DO NOT EXPOSE CABLES AND PLUGS TO RAIN OR MOISTURE.DO NOT ATTEMPT TO PERFORM ANY SERVICING THAT IS NOT INCLUDED IN THE OPERATING INSTRUCTIONS. DO NOT ATTEMPT TO REPLACE THE BATTERY, AS INCORRECT INSTALLATION CAN CAUSE FIRE OR EXPLOSION. FOR SERVICE, CONTACT QUALIFIED SERVICE PERSONNEL.DO NOT REMOVE COVER OR BACK OF PRODUCT. THERE ARE NO USER-SERVICEABLE PARTS INSIDE. ATTEMPTING TO MODIFY CONTROLS OR PERFORMANCE BEYOND MANUFACTURER SPECIFICATIONS MAY RESULT IN HAZARDOUS EXPOSURE TO RADIATION.Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.3
IMPORTANT SAFETY INSTRUCTIONS1. Read all instructions and save them for personal reference in the future.2. Follow all directions for operating the product.3. Heed all warnings on the product and in the operation instructions.4. Clean with a dry cloth only. Always unplug the product from any powersource before cleaning.5. Do not use third-party attachments or non-recommendedaccessories with this product.6. Do not place product on an unstable surface, such as a cart,stand, tripod, table, etc. Unstable surfaces may cause theproduct to fall and cause serious injury to people and seriousdamage to the product. Follow all manufacturer instructions formounting and accessories.7. Do not block or cover ventilation slots. Openings in the product cabin ensurereliable operation and prevent overheating. Avoid placing on beds, sofas, andrugs, or mounting on racks or bookcases, unless proper ventilation is provided.8. Do not use plug incorrectly. The product may come with a polarized,alternating-current line plug (one blade is wider/larger than the other). This is asafety feature: the plug will only go into outlet receptacles one way. Do not forcethe plug. If the plug does not fit, contact your electrician to replace the outlet.9. Prevent power cord hazards. Route cords to avoid walking on them or pinchingthem, especially at plug ends and connection points to the product & power outlets.10. Unplug power cord when not in use. The product should not be plugged into apower source when not in use for long periods of time.11. Do not use this product near bodies of water. The product is not waterproofand cannot be fully submerged in water. Power cords and electric currents shouldnever be exposed to water.12. Do not set up near heat sources. Avoid radiators, stoves, heat registers,amplifiers, and other devices that produce heat. Avoid long exposure to sunlightand high temperatures.13. Refer all service to qualified personnel. If the product becomes damagedduring use or encounters a malfunction, contact qualified service personnel. Donot attempt to service yourself.14. To use wirelessly, disconnect AC plug completely. The plug must becompleted disconnected from the power outlet.4
UNPACKINGThis box includes the following items: • Monster GLO speaker • AC Power Cable • Audio Cable • User Manual (incl. Limited Warranty Statement) • Quick Start Guide • Wall Mount If any items are missing, contact our customer service team at 1.800.976.0677.1. AUX input2. AC power input3. Power ON/OFF4. Volume DOWN/UP5. Bluetooth/AUX pairing6. EZ-Play TRANSMIT/RECEIVESPEAKER COMPONENTS7. Color Setting8. Light Setting9. LED Light Panel10. Mounting HandleIPX5 Water ResistanceAs rated according to International Protection Marking (IP Code), the Monster GLO is rated IPx5 for water resistance capable of withstanding exposure to water jets. This makes the Monster GLO safe n light rain, near splashing drinks, and even around the pool (but not IN the pool!).LED Light PanelsThe speaker has two LED light panels facing opposite directions. Use the panels to light up spaces after dark, or just to add some color to festivities. Change colors, brightness, and light duration to suit your personal needs.NEW FEATURES5
GETTING STARTED• Connect the AC cable to the speaker.• Plug the AC cable into a wall outlet.• Press the Power button to turn the speaker ON (GREEN LED will turn on, and voice confirmation).• Speaker will enter Bluetooth pairing mode (BLUE LED will flash).• If 3.5mm AUX cable is plugged in, speaker will automatically enter AUX mode.CHARGING BATTERYNOTE: Before first use, charge for ~10 hours.• Connect speaker to AC outlet via AC power input to charge the battery (RED LED will turn on).• When fully charged, RED LED will turn off.• When low on battery life, RED LED will flash.• Make sure Bluetooth function is enabled on your device.• Place Bluetooth device and speaker within pairing distance (~3 ft.).• Press and hold Bluetooth button for 3 seconds to enter pairing mode (BLUE LED will flash).• Search for Bluetooth connections on your device. Select “TOWER OF MUSIC 2”.• Speaker will confirm connection with audible sound (BLUE LED turns solid).BLUETOOTH CONNECTIONNFC CONNECTION• Turn on Bluetooth on your NFC-compatible device.• Tap your NFC-compatible device onto the speaker’s NFC logo.• When paired, BLUE LED will stop flashing and remain steady.(SELECTED DEVICE MUST BE ANDROID)3.5MM AUX INPUT• Plug a 3.5mm cable into the AUX input. Speaker will automatically turn off Bluetooth function and switch to AUX.• Connect any audio device to the 3.5mm audio jack to play audio through the speaker.• Control volume on the speaker or use the connected device’s playback functions.6
EZ-PLAY WIRELESS CONNECTION• Press the EZ-PLAY button TRANSMIT EZ-Play connection(AMBER LED will flash on TRANSMIT).• Press and hold the EZ-PLAY button on another EZ-PLAY speaker for 3 seconds to RECEIVE EZ-PLAY connection (AMBER LED will flash on RECEIVE).• When speakers connect, the same audio will play from each speaker(AMBER LED will turn solid).• When connection is established, speakers will automatically connect whenever both are powered ON and in range.• When speaker is converted to RECEIVE, AUX input and Bluetooth featuresare disabled.• Repeat steps with multiple speakers (up to 8 total) to play music inmultiple areas. Transmitting SpeakerAmberGreenReceiving Speaker(ADDITIONAL SPEAKERS SOLD SEPARATELY)SPECIFICATIONSInput(s) Bluetooth / AUX / NFC / EZ-Play (TWS)Control Buttons Power, EZ-Play, Bluetooth, Volume DOWN,Volume UP, Color LightLED Indicators Power, Transmit, Receive, Bluetooth, LightBattery 12.6V 6600mAh, approx. 8 hours of wireless usePower Input ACPower Save Auto-sleep after 15 minutes with no signal, power down after 30 minutes of sleep modeSpeaker Output 5W x 2Driver Layout 3” Driver (x2), Passive Radiator (x2)THD + Noise <10%Cabinet Material PlasticDimenstions (W x H x D) 8.11” x 12.6” x 8.11”Weight 5.4 lbs.General7
Green Power LEDRed Charging LEDUnit power on modeUnit in Standby modeUnit in Standby mode / Fully chargedLow in Battery indicationBlue Bluetooth LEDCharging in progressUnit is connected with BT deviceUnit is in BT waiting modeAmber EZ-Play LEDUnit is in BT pairing modeEZ-Play Speakers connectedNo connection / Lost connectionOnOffOffSlow FlashOnSteady On Slow FlashFast FlashSteady On Slow FlashFast Flash Scan Transmit unit signal / send signalto receive unit (connection request)Led Status IndicatorsKeyPower On / Off Press to turn the speaker ON / Press and hold to turnspeaker OFFEZ-Play Press to TRANSMIT / Press and hold to RECEIVEBluetooth Press and hold to enter pairing modeVolume DOWN (-) Press to decrease speaker volumeVolume UP (+) Press to increase speaker volumeColorLight Press to change brightness of LED lightsVolume UP (+) Press and hold to turn LED lights ON/OFFOperating TempOperating Temperature Range 32F° - 104F°Operating Humidity Range 40~90% RHStorage Temperature Range -13F° to 158F°Connections3.5mm AUX In x 1BluetoothBluetooth Version 4.2 + EDRBluetooth Profile A2DP, AVRCPBluetooth Range 10m (33ft.)Press to change LED light colorPress and hold to turn LED lights ON/OFF8
BTW3189
FCC Statement:This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.—Consult the dealer or an experienced radio/TV technician for help.Caution: Any changes or modifications not expressly approved by the party responsiblefor compliance could void the user's authority to operate the equipment.This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 0cm between the radiator&your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu