ADC Telecommunications PRSM070A FlexWave Prism - 700 Lower ABC - Band User Manual 1
ADC Telecommunications Inc FlexWave Prism - 700 Lower ABC - Band 1
Contents
- 1. User manual 1
- 2. User manual 2
- 3. User manual 3
- 4. User manual 4
User manual 1
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1379094 |
| Application ID | x9Fb9x3p4AY5zzrZeq37UQ== |
| Document Description | User manual 1 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 26.18kB (327297 bits) |
| Date Submitted | 2010-11-19 00:00:00 |
| Date Available | 2010-11-19 00:00:00 |
| Creation Date | 2008-10-29 09:51:41 |
| Producing Software | Adobe PDF Library 8.0 |
| Document Lastmod | 2008-10-29 09:51:52 |
| Document Title | User manual 1 |
| Document Creator | Adobe InDesign CS3 (5.0.4) |
FlexWave™ Prism Flexible Outdoor Wireless Coverage and Capacity FlexWave™ Prism Flexible Outdoor Wireless Coverage and Capacity FlexWave™ – ADC’s Next Generation of Wireless Solutions for Improving Wireless Capacity, Coverage, Flexibility and Customer Retention FlexWave™ Prism ADC’s FlexWave™ Prism is the most flexible, scalable and complete solution for addressing coverage and capacity needs for current and emerging wireless networks. The Prism improves wireless network coverage and capacity by extending services from existing cell sites, to hard-to-reach areas by distributing coverage from a centralized radio suite. Utilizing a centralized distributed architecture, service providers are able to recognize significant CAPEX/OPEX savings through a shared Base Station Hotel (multiple BTS co-located together), as well as a shared Remote Radio Transceiver approach. The Prism’s flexibility and scalability offers service providers an optimal solution for multiple applications such as; dense urban centers, dense suburban areas, campuses, enterprise buildings, subways and tunnels. The Prism’s distributed architecture and small form factor allows service providers to cost-effectively increase coverage and capacity in these hard-to-reach areas. Features and Benefits: • Flexible Architecture –– Supports multiple frequency bands and wireless protocols in one enclosure –– Scalable and modular –– Multiple non-contiguous segments of 1.5 to 75 MHz each –– BTS interface supporting RF and OBSAI/CPRI standards (Future) –– Field upgradeable • User Friendly –– Embedded element management system, supporting web based access and SNMP –– Fully sealed, maintenance free electronics for harsh outdoor applications • Cost Effective –– Efficient use of CAPEX equipment and real estate 10/08 • 106969AE –– Transport rates supporting Dark Fiber and Millimeter Wave Overview With the increasing popularity and reliance on wireless voice and data services, subscribers expect to have coverage at anytime, anywhere. In addition to increased wireless device usage, wireless service providers implementing 3G technologies have recognized a reduction in coverage patterns within existing coverage footprints, opening coverage “holes” within the network. To resolve this issue, it requires service providers to extend coverage and/or increase capacity within the non-coverage areas. This has been traditionally accomplished by adding new macro cell towers; however, with city centers becoming more congested and local government zoning regulations becoming more stringent, obtaining permits for new macro cell sites is becoming increasingly difficult. The Prism offers service providers a flexible, small form factor solution to extend coverage and capacity where needed, as well as support for the increasing number of protocols and frequencies available today and in the future. www.adc.com • +1-952-938-8080 • 1-800-366-3891 FlexWave™ Prism Flexible Outdoor Wireless Coverage and Capacity Application The FlexWave Prism uses patented digital-over-fiber technology to distribute RF to desired locations. The Prism digitizes the entire designated RF band and digitally transports it over dark fiber or millimeter wave links and reconstructs the signal at full bandwidth, regardless of modulation technology, at the remote location. ADC’s digital RF transport allows RF signals to be replicated at full dynamic range, independent of the link length, for improved data throughput. As service providers migrate to 3G and 4G networks, highdata rate broadband services, networks utilizing a Prism backbone will be ready. FlexWave™ Prism The Prism offers a flexible architecture to distribute wireless coverage and capacity. Its versatility and small form factor allow service providers to quickly deploy networks in areas where zoning restrictions often hinder installation of traditional macro cell towers and base stations. Centralization of base station capacity can also be realized using the FlexWave Prism. This allows service providers to further benefit by reducing capital expenditures and annual operating costs. System Description The FlexWave Prism is a flexible and cost effective solution for Distributed Antenna System applications: Microcell and/or CPRI/OBSAI Remote Radio Head applications: • Next Generation DAS; optimized for multiple frequency bands, scalable RF bandwidth & transport rates • Flexible SeRF technology; serial RF processing, enabling scalable frequency bands and bandwidths • Digitial RF Transport; Digitally transports RF from the BTS to remote locations for distribution of RF signals. • Digital simulcast; signal is digitally combined and split to mulitple remotes Future enhancements will include: • CPRI/OBSAI; flexibility to support BTS interface standards • IP ready platform; smooth integration to IP front/backhaul networks Sample System Configuration (3 Band 3 Remote Simulcast) REMOTES • 106969AE • Microcell; fully contained capacity solution utilizing cost efficient low bit-rate IP backhaul HOST 10/08 OBSAI/CPRI Multiplexed SeRF over mm-wave SeRF Base Station 1 OBSAI/CPRI to SeRF Converter RF SeRF Base Station 2 RF to SeRF Converter SeRF Board RF SeRF Base Station 3 Multiplexed SeRF over Fiber RF to SeRF Converter Data Multiband, protocol-agnostic Universal Radio Head Backhaul Multiplexed SeRF over mm-wave www.adc.com • +1-952-938-8080 • 1-800-366-3891 FlexWave™ Prism Flexible Outdoor Wireless Coverage and Capacity Host Unit The rack-mountable FlexWave Prism Host Unit is typically located at a Base Station or a facility housing a suite of Base Stations. On the forward path, the Host Unit receives the RF signals from the BTS and digitizes the designated RF bands and digitally transports them over single mode fiber or a millimeter wave link to the Remote Units. On the reverse path, the Host Unit receives the digitized RF signals from the Remote Unit and converts them back to RF for the BTS. The Prism Host Unit is completely modular in design. Digital/Analog Radio Transceiver (DARTS) are hot swappable providing easy upgrades to addtional bands without interrupting existing service. The Prism Host Unit supports up to eight DART cards (supporting up to eight Remote Units) and is capable of simulcasting signals up to as many as eight Remote Units. 106969AE The Host Unit utilizes an embedded element management system for system configuration and network monitoring. The embedded EMS collects alarm information from both the Host and Remote Units. For multiple link deployments, multiple Host Units can be networked together at the same BTS site. In addition to sending alarm notifications to the Element Management System (EMS) through software, the Prism Host Unit also features front panel alarm reporting. LEDs on the front panel of the Host Unit will change color depending on the status of the unit. LED displays provide information regarding the following items: • FlexWave™ Prism Host Unit • RF conditions • Power • System mode (active/standby) 10/08 • Indicate unit fault condition www.adc.com • +1-952-938-8080 • 1-800-366-3891 FlexWave™ Prism 10/08 • 106969AE FlexWave™ Prism Flexible Outdoor Wireless Coverage and Capacity Single Band Remote Unit Dual Band Remote Unit Tri Band Remote Unit Quad Band Remote Unit Remote Units The Prism Remote Units utilize a modular design, which supports up to four bands. Each Remote allows for future upgrades and easy field access. Typical mounting options for the Remote Unit include: pole-mount, inside pole-mount, wall-mount, and sub-terrain vault-mount. The electronics enclosure of the Prism Remote Unit is fully sealed IP-65 rated, which minimizes maintenance and is ideal for harsh environments. Fiber, antenna, and power input/output connectors are all sealed for maximum protection. On the forward path, the Remote Unit receives the digitized spectrum from the Host Unit and converts the spectrum back into RF to be distributed via an externally mounted antenna system. On the reverse path, the Remote Unit digitizes the designated RF spectrum and digitally transports it over single-mode fiber or MMW to the Host Unit. In addition to sending alarm notifications to the EMS software, the Prism Remote Unit also features LED alarm reporting. An LED on the bottom of the Remote Unit will illuminate upon a fault condition. www.adc.com • +1-952-938-8080 • 1-800-366-3891 FlexWave™ Prism Flexible Outdoor Wireless Coverage and Capacity Alarm and Management System The FlexWave Prism utilizes an embedded network management for system configuration and network monitoring. The Element Management System (EMS) utilizes a web based interface or SNMP protocol for easy accesses to the system. 10/08 • 106969AE FlexWave™ Prism The EMS provides operational and maintenance capabilities for the Prism system (Host and Remote). The EMS can be used to set up and monitor status of any Host and any associated Remote Units. The EMS has the ability to configure the system, view status and parameter settings, download software, change parameters and monitor system performance and alarms Access and troubleshooting can also be accomplished on-site at either the Host Unit and/or the Remote Unit by utilizing a craft interface. Thus, allowing technicians the ability to plug-in a laptop and access all associated units connected to it. Host Site Capabilities The EMS performs the following functions at the Host site: • Provides real-time information regarding faults • Set up simulcast ratios • Digital timing delays • Displays various system level values (voltages, RF, power, etc.) • Records and generates history reports with time and date stamps • Adjusts performance related parameters of the Host Unit and Remote Unit • Permits placement of Host Unit and Remote Unit into standby mode • Allows download of new software versions to the Host Unit and Remote Units Network Monitoring Capabilities The embedded EMS allows for remote alarm monitoring and network control of the Prism can also be performed from an off-site location or Network Operation Center (NOC). Communications to the NOC can be performed using the web based interface or SNMP protocol. The EMS performs the following functions at offsite locations such as the NOC: • Provides real-time information regarding faults • Displays various system level values (voltages, RF, power, etc.) • Adjusts performance-related parameters of the Host Unit and Remote Unit • Permits placement of Host Unit and Remote Unit into standby mode • Access records and generates history reports with time and date stamps • Allows download of new software versions to the Host Unit and Remote Units www.adc.com • +1-952-938-8080 • 1-800-366-3891 FlexWave™ Prism Flexible Outdoor Wireless Coverage and Capacity 10/08 • 106969AE FlexWave™ Prism Specifications RF Specifications Supported Frequency Blocks: Bandwidth: Frequency Band Supported: Digital Simulcast: Diversity Receive: 1-4 per Remote Unit; 1-8 per Host Unit 1.5 to 75 MHz non-contiguous Cell (850), ESMR, PCS (1900), AWS (2100), E-GSM, DCS (1800), UMTS (2100) Up to 8:1 Single Host (can daisy chain Host for higher simulcast) Yes (Optional) Propagation Delay System Delay: Delay Management: <5 dB typical, 6 dB max Digital (Manual or Automatic) Noise Figure Noise Figure: Input IP3: <5 dB typical, 6 dB max >-8 dBm Optical Specifications Optical Budget: Digital Transport Rate: 26 dB 3.072 Gbps Output PoweR at antenna port (dBm) Number of RF Carriers Frequency Channels Composite Power per Carrier CELL (850) 43.0 ESMR PCS (1900) Composite Power per Carrier 43.0 43.0 38.1 38.1 43.0 43.0 AWS (2100) 43.0 E-GSM Composite Power per Carrier 40.0 43.0 38.1 35.1 43.0 40.0 43.0 43.0 31.0 31.0 DCS (1800) 32.8 UMTS (2100) 42.5 16 Composite Power per Carrier Composite Power per Carrier 37.0 43.0 34.0 43.0 31.0 32.1 32.1 38.1 29.1 38.1 26.1 43.0 37.0 43.0 34.0 43.0 31.0 40.0 43.0 37.0 43.0 34.0 – – 34.0 31.0 37.0 31.0 40.0 31.0 40.0 28.0 32.8 35.8 32.8 38.1 32.8 41.8 32.8 41.8 29.8 42.5 42.5 39.5 42.5 36.5 42.5 33.5 – – REMOTE UNIT ENVIRONMENTAL Specifications Outside Ambient Temp Rating: -40°C to +50°C (-40ºF to +122ºF) Storage Temperature: -40°C to +70°C (-º40F to +158) Humidity: 10% to 90% non-condensing Lightning Protection: 20kA IEC 1000-45 8/30 µs Waveform Remote Unit Enclosure: Mounting: Single Band Dimensions (H x W x D): Volume: Weight: Dual Band: Dimensions (H x W x D): Volume: Weight: Tri Band: Dimensions (H x W x D): Volume: Weight: Quad Band: Dimensions (H x W x D): Volume: Weight: Cooling: Optical Connectors: www.adc.com • IP-65 Wall, Pole, Inside Pole, Strand, and Vault 23.1” x 12.15” x 10.125” (58.67 cm x 30.86 cm x 25.71 cm) 1.56 ft3 47 lbs. chasis, 64 lbs. total (21 kg chasis, 29 kg total) 31.1” x 12.15” x 10.125” (78.99 cm x 30.86 cm x 25.71 cm) 2.10 ft3 63 lbs. chasis, 96 lbs. total (28 kg chasis, 43 kg total) 39.1” x 12.15” x 10.125” (99.31 cm x 30.86 cm x 25.71 cm) 2.64 ft3 79 lbs. chasis, 127 lbs. total (36 kg chasis, 57 kg total) 50.2” x 12.15” x 10.125” (127.51 cm x 30.86 cm x 25.71 cm) 3.40 ft3 98 lbs. chasis, 163 lbs. total (44 kg chasis, 74 kg total) Fan, IP-55 Sealed Proax +1-952-938-8080 • 1-800-366-3891 Specifications (con't) Host Unit Mounting: 19-inch rack Dimensions (H x W x D): 5.25" x 19" x 19" (13.34cm x 48.26 cm x 48.26) (3 RUs) Weight: <25 Pounds (<11 kg) Remote Unit Power Requirements Power Supply: Battery Backup: 100-240 VAC, 50-60 Hz Yes (optional external UPS) Host Unit Power Requirements Power Source: 21 to 60 VDC FlexWave™ prism Element Management Embedded EMS: Yes SNMP Based Management: Yes Note: Unless noted otherwise specifications are typical and subject to change Website: www.adc.com From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080 Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our website. ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101 Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer 106969AE 10/08 Original © 2008 ADC Telecommunications, Inc. All Rights Reserved
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.1-c037 46.282696, Mon Apr 02 2007 18:36:56 Create Date : 2008:10:29 09:51:41-05:00 Metadata Date : 2008:10:29 09:51:52-05:00 Modify Date : 2008:10:29 09:51:52-05:00 Creator Tool : Adobe InDesign CS3 (5.0.4) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 9900 bytes, use -b option to extract) Instance ID : uuid:3bc5fdc6-c053-4f74-8604-5467f9fb333d Document ID : adobe:docid:indd:7a65aff8-80d5-11dd-92ef-fe9dddfea075 Rendition Class : proof:pdf Derived From Instance ID : acf07bcc-0169-11dd-9a6a-cc39889fc82f Derived From Document ID : adobe:docid:indd:482ed8cf-5450-11da-906a-b2083b848a1a Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Y Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:C5F37AF3A59811DD9615AF8B7BAFBD89, uuid:DE241FC7A5C611DD9407E459BF206171, uuid:28BC9A40A36411DD819FEDB5E67725F4, uuid:2848A419A68B11DD88EB9F2C87E3F74B, uuid:DDD4246D3A85DC1198DFF466938FB459, uuid:DBD4246D3A85DC1198DFF466938FB459 Manifest Reference Document ID : uuid:C5F37AF2A59811DD9615AF8B7BAFBD89, uuid:59EC7CD3AE83DC11AB2B9CC09F37179E, uuid:28BC9A3FA36411DD819FEDB5E67725F4, uuid:0ECC8C64A36111DD819FEDB5E67725F4, uuid:DCD4246D3A85DC1198DFF466938FB459, uuid:DAD4246D3A85DC1198DFF466938FB459 Format : application/pdf Producer : Adobe PDF Library 8.0 Trapped : False Page Count : 8 Creator : Adobe InDesign CS3 (5.0.4)EXIF Metadata provided by EXIF.tools