ADESSO Technologies RCV-110R 2.4G Wireless Receiver User Manual RCV 110R QG English

ADESSO TECHNOLOGIES INC. 2.4G Wireless Receiver RCV 110R QG English

User manual

QuickGuideEnglishwww.adesso.comINSTALLATION123TROUBLESHOOTING:Plug the Wireless Receiver into your computer’s available USB port.1.Your computer’s operating system will automatically detect and connect the device (this device is plug and play, no driver is required). Your wireless device is now ready to use.2.RCV-110R2.4GHz Wireless Receiver DongleWireless ReceiverUSB PortIf you cannot get your wireless device to work after installation try the following:2. Ensure Power Switch on your wireless device is set to ON. Then press the Connect Button to establish wireless connection.Ensure that the Wireless Receiver is securely plugged into a properly powered USB port on your computer.3. Make sure you are using new batteries and verify they are properly installed in battery compartment. 1.
1、将接收器插入电脑空余的USB端口，在电脑开启状态下， 接收器在插入USB端口后的10秒钟左右，会自动安装硬件 所需的驱动程序。平台系 统 : 微软视 窗Win2000/XP/Vista/7。安装步骤支持平台键盘图 电池安装说明将一节7号电池按电池仓内的正负标示方向装入键盘的电池仓内，盖好电池门盖。提示 1. 产品在出厂前已完成对码操作，不需要再对码。 2. 在更换 电 池时，将 接 收器拔离 电脑，以免 掉码或死机 。 3. 长期不使用时，请把电池取出来分开保管，以免电池漏 液将产品损坏。2012/06/08tenkey199.0 mm140.0 mm(Wireless Combo Photo) Compatibility: Windows 2000/XP/Vista/7.(Installation of battery)(Tips)Finish code before delivering.Pull out the receiver from computer when change the battery. Avoid to the computer crash or off code . If no use for long time, Please take out the battery (System platform)(Installation Steps)In the state of computer opening,Put the Receiver into USB Connector , After 10 seconds , it will auto install the driving process of hardware.2、打开键盘产品底部的电池盖。Opening the battery cover of the Mouse and keyboard .3、按电池仓所指示的极性装入电池，请勿反装电池，产品会 自动选择与之配对接收器。Install the battery in correct position .4、您的无线鼠标、键盘全部安装完毕。Installation is over.Put two pieces 7-AAA battery into battery cassette in correct position.from products.,To avoid damaging the products .电池仓Battery box电池 仓Battery box接收器仓Receiverbox
FCC Certification Requirements Caution: Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Navigation menu