AEE Wireless Technology 830T 2.4GHz Wireless Camera User Manual Manual
Shenzhen AEE Wireless Technology Co., Ltd. 2.4GHz Wireless Camera Manual
Contents
- 1. Manual
- 2. Manual revised
Manual
Operation Guide 2.4GHz Wireless Camera Model: ZT-830T DLNGRANI Camera Adapter (For charge) STRUCTURE CAMERA Antenna Charge . . . Power Indicator Indicator Lens ‘ Universal ~——- Bracket Power Jack 0 I l . Power Switch INSTALLATION 1. Locate the camera to a specific position and then adjust it to a suitable angle. 2. Turn on the camera by tuning the power switch from OFF to any channel and the power indicator lights up green. Notes: 0 The camera with built-in Li-battery is able to work at least 2 hours continuously and independently anywhere. c If the battery is dead. please recharge it with the camera adapter (DC 5V 700mA). The charge indicator lights up red during charging and turns dim after a full charge. A full charge will take about 2 hours. 0 The power switch must be kept at OFF position during charging. CAMERA CHANNEL SETUP You could adjust the channel switch of camera to set the channel for multi-camera working or avoiding the interference. Please tune the channel switch on the back cover to the desired channel as the following diagram. 4 3 1 - channel 1: l / - - Channel Switch it i _ £22222: if 042» 4 - channel 4 S—PECIFICATIONS _— as ‘ép SC —_ __ B1-___ —__ —-_—_ __ *Cl1annel Frequency: CH]:2.414MHZ: C112=2.432Ml'lz: C113:2.450Mllz: Cll4z2.468Mllz Waning This product is for the sole purpose of security and applicable for monitoring in residential houses. shops and companies The user shall observe local rules. regulations and laws, and shall be solely liable in this regard. This company shall not be liable for any "legalities therein. Caution: Any changes or modifications not expressly approved by the party responsrble for compliance could void the user's authority to operate the equipment Note“ New This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to part 15 of the FCC Rules. These lirmts are designed to provide reasonable protection against harmfiil interference in a resrdential installation. The equipment generates. uses and can radiate radio frequency energy and. if not installed and used in accordance with the instructions, may cause harmful interference to radio comrminications. However. there is no guarantee tint interference will not occur in a particular installation. Ifthis equipment does cause harmful interference to radio or telension reception. which can be determined by filming the equipment 03 and on. the user is encouraged to try to correct the interference by one or more of the following measures: ~Reoriem or relocate the recervrng antenna. ~Increase the separation between the equipment and receiver ——Connect the equipment into an outlet on a cue-mt diflerent from that to which the receiver is connected ~Consult the dealer or an experienced radioTV technician for help. FCC Statement: This device complies with Part 15 o the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 5 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:6cd21e4c-8ca8-4872-8c11-f224160bf2dd Modify Date : 2006:06:19 18:06:33+08:00 Create Date : 2006:06:19 18:06:33+08:00 Metadata Date : 2006:06:19 18:06:33+08:00 Document ID : uuid:6e4c459a-c4b0-46ac-b3e7-f9da547631b7 Format : application/pdf Creator : Adobe Acrobat 6.0 Producer : Adobe Acrobat 6.0 Image Conversion Plug-inEXIF Metadata provided by EXIF.tools