ARRIS Group VT2542 Wireless Broadband Voice Gateway User Manual

ARRIS Group, Inc. Wireless Broadband Voice Gateway 521569 001

a href="https://usermanual.wiki/ARRIS-Group" itemprop="url"> ARRIS Group >

Contents

Manual Part 1

User GuideVT2500/VT2400Voice Gateway
Overview Installation Troubleshooting Contact FAQ Specifications Glossary LicenseConfiguration: Basic Gateway TCP/IP Wireless Print Server USB VT2500/VT2400 Voice Gateway User Guide iiWARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. THE UNIT MUST NOT BE EXPOSED TO DRIPPING OR SPLASHING. DO NOT PLACE OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, ON THE UNIT.CAUTION: TO PREVENT ELECTRIC SHOCK, THIS EQUIPMENT MAY REQUIRE A GROUNDING CONDUCTOR IN THE LINE CORD. CONNECT THE UNIT TO A GROUNDING TYPE AC WALL OUTLET USING THE POWER CORD SUPPLIED WITH THE UNIT.CAUTION: THIS PRODUCT WAS QUALIFIED UNDER TEST CONDITIONS THAT INCLUDED THE USE OF THE SUPPLIED CABLES BETWEEN SYSTEMS COMPONENTS. TO ENSURE REGULATORY AND SAFETY COMPLIANCE, USE ONLY THE PROVIDED POWER AND INTERFACE CABLES AND INSTALL THEM PROPERLY. CAUTION: DIFFERENT TYPES OF CORD SETS MAY BE USED FOR CONNECTIONS TO THE MAIN SUPPLY CIRCUIT. USE ONLY A MAIN LINE CORD THAT COMPLIES WITH ALL APPLICABLE PRODUCT SAFETY REQUIREMENTS OF THE COUNTRY OF USE.CAUTION: INSTALLATION OF THIS PRODUCT MUST BE IN ACCORDANCE WITH NATIONAL WIRING CODES AND CONFORM TO LOCAL REGULATIONS.CAUTION: DO NOT OPEN THE UNIT. DO NOT PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE INSTALLATION AND TROUBLESHOOTING INSTRUCTIONS. REFER ALL SERVICING TO QUALIFIED SERVICE PERSONNEL.CAUTION: CHANGES AND MODIFICATIONS NOT EXPRESSLY APPROVED BY MOTOROLA FOR COMPLIANCE COULD VOID USER’S AUTHORITY TO OPERATE THE EQUIPMENT.When using this device, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:•Read all of the instructions listed here and/or in the user manual before you operate this equipment. Give particular attention to all safety precautions. Retain the instructions for future reference.•This device must be installed and used in strict accordance with manufacturer’s instructions as described in the user documentation that comes with the product.•Comply with all warning and caution statements in the instructions. Observe all warning and caution symbols that are affixed to this equipment.•Comply with all instructions that accompany this equipment.•Do not overload outlets or extension cords, as this can result in a risk of fire or electric shock. Overloaded AC outlets, extension cords, frayed power cords, damaged or cracked wire insulation, and broken plugs are dangerous. They may result in a shock or fire hazard.•Route power supply cords so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords where they are attached to plugs and convenience receptacles, and examine the point where they exit from the product.•Place this equipment in a location that is close enough to an electrical outlet to accommodate the length of the power cord.•Place unit to allow for easy access when disconnecting the power cord of the device from the AC wall outlet.•Do not connect the plug into an extension cord, receptacle, other outlet unless the plug can be fully inserted with no part of the blades exposed.•Place this equipment on a stable surface.
Download:
Mirror Download [FCC.gov]
Document ID738589
Application IDRcXB4Xv2J2Sks9Epan3LeQ==
Document DescriptionManual Part 1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize160.29kB (2003597 bits)
Date Submitted2006-12-14 00:00:00
Date Available2006-12-14 00:00:00
Creation Date2006-12-14 08:40:13
Producing SoftwareAcrobat Distiller 6.0 (Windows)
Document Lastmod2006-12-14 08:41:29
Document Title521569-001.book
Document CreatorFrameMaker 6.0
Document Author: MGI2603
FCC ID Filing: ACQVT2542

Navigation menu