ASUSTeK Computer WL-120GV2 Notebook P.C. User Manual NB Copyright Eng 3 4 03 p65

ASUSTeK Computer Inc Notebook P.C. NB Copyright Eng 3 4 03 p65

Contents

Users Manual

Copyright InformationNo part of this manual, including the products and software described in it, may be reproduced, transmitted, tran-scribed, stored in a retrieval system, or translated into any language in any form or by any means, except documen-tation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COM-PUTER INC. (“ASUS”).ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS ORIMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MER-CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIREC-TORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL,OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSI-NESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HASBEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERRORIN THIS MANUAL OR PRODUCT.Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless suchrepair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defacedor missing.Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights oftheir respective companies, and are used only for identification or explanation and to the owners’ benefit, withoutintent to infringe.SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFOR-MATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULDNOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LI-ABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDINGTHE PRODUCTS AND SOFTWARE DESCRIBED IN IT.Copyright © 2003 ASUSTeK COMPUTER INC. All Rights Reserved.Limitation of LiabilityCircumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recoverdamages from ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages fromASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property andtangible personal property; or any other actual and direct damages resulted from omission or failure of performinglegal duties under this Warranty Statement, up to the listed contract price of each product.ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringe-ment under this Warranty Statement.This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and yourreseller are collectively responsible.UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-PARTYCLAIMS AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR(3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIALDAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RE-SELLER IS INFORMED OF THEIR POSSIBILITY.
1Product Name: Notebook PC HardwareManual Revision: 1 E1660Release Date: June 2004Notebook PCHardware User’s Manual
Safety StatementsFederal Communications Commission StatementThis device complies with FCC Rules Part 15. Operation is subject to the following two conditions:• This device may not cause harmful interference, and• This device must accept any interference received, including interference that may cause undesiredoperation.This equipment has been tested and found to comply with the limits for a class B digital device, pursuantto Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. This equipment generates,uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-tions, may cause harmful interference to radio communications. However, there is no guarantee that inter-ference will not occur in a particular installation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Reprinted from the Code of Federal Regulations #47, part 15.193, 1993. Washington DC: Office of theFederal Register, National Archives and Records Administration, U.S. Government Printing Office.Power Safety RequirementProducts with electrical current ratings up to 6A and weighing more than 3Kg must use approved powercords greater than or equal to: H05VV-F, 3G, 0.75mm2 or H05VV-F, 2G, 0.75mm2.Canadian Department of Communications StatementThis digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatusset out in the Radio Interference Regulations of the Canadian Department of Communications.This Class B digital apparatus complies with Canadian ICES-003.(Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.)For use with AC Adaptor Model (Pour Utiliser Avec Modele): PA-1121-02 (120W), ADP-90FB (90W), ADP-65DB (65W)WARNING! The use of a shielded-type power cord is required in order to meet FCCemission limits and to prevent interference to the nearby radio and television recep-tion. It is essential that only the supplied power cord be used. Use only shieldedcables to connect I/O devices to this equipment. You are cautioned that changes ormodifications not expressly approved by the party responsible for compliance couldvoid your authority to operate the equipment.
3Safety StatementsNordic Cautions (for Notebook PC with Lithium-Ion Battery)(Japanese)Macrovision Corporation Product NoticeThis product incorporates copyright protection technology that is protected by method claims of certainU.S.A. patents and other intellectual property rights owned by Macrovision Corporation and other rightsowners. Use of this copyright protection technology must be authorized by Macrovision Corporation, andis intended for home and other limited viewing uses only unless otherwise authorized by MacrovisionCorporation. Reverse engineering or disassembly is prohibited.CDRH RegulationsThe Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administrationimplemented regulations for laser products on August 2, 1976. These regulations apply to laser productsmanufactured from August 1, 1976. Compliance is mandatory for products marketed in the United States.ATTENZIONE! Rischio di esplosione della batteria se sostituita in modo errato. Sostituire la batteria con ununa di tipo uguale o equivalente consigliata dalla fabbrica. Non disperdere le batterie nell’ambiente. (Italian)VORSICHT! Explosionsgetahr bei unsachgemäßen Austausch der Batterie. Ersatz nur durch denselbenoder einem vom Hersteller empfohlenem ähnlichen Typ. Entsorgung gebrauchter Batterien nach Angabendes Herstellers. (German)ADVARSELI! Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske medbatteri af samme fabrikat og type. Levér det brugte batteri tilbage til leverandøren. (Danish)VARNING! Explosionsfara vid felaktigt batteribyte. Använd samma batterityp eller en ekvivalent typsom rekommenderas av apparattillverkaren. Kassera använt batteri enligt fabrikantens instruktion. (Swedish)VAROITUS! Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo ainoastaan laitevalmistajansousittelemaan tyyppiin. Hävitä käytetty paristo valmistagan ohjeiden mukaisesti. (Finnish)ATTENTION! Il y a danger d’explosion s’il y a remplacement incorrect de la batterie. Remplaceruniquement avec une batterie du mêre type ou d’un type équivalent recommandé par le constructeur.Mettre au rebut les batteries usagées conformément aux instructions du fabricant. (French)ADVARSEL! Eksplosjonsfare ved feilaktig skifte av batteri. Benytt samme batteritype eller en tilsvarende typeanbefalt av apparatfabrikanten. Brukte batterier kasseres i henhold til fabrikantens instruksjoner. (Norwegian)CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with the same orequivalent type recommended by the manufacturer. Dispose of used batteries according to themanufacturer’s instructions. (English)WARNING: Use of controls or adjustments or performance of procedures other thanthose specified herein or in the laser product installation guide may result in hazard-ous radiation exposure.
4Safety StatementsSafety StatementsThe following safety precautions will increase the life of the Notebook PC. Follow all precautions andinstructions. Except as described in this manual, refer all servicing to qualified personnel. Do not usedamaged power cords, accessories, or other peripherals. Do not use strong solvents such as thinners,benzene, or other chemicals on or near the surface.Disconnect the AC power and remove the battery pack(s) before cleaning. Wipe theNotebook PC using a clean cellulose sponge or chamois cloth dampened with a solu-tion of nonabrasive detergent and a few drops of warm water and remove any extramoisture with a dry cloth.DO NOT expose to or use near liq-uids, rain, or moisture. DO NOT usethe modem during an electrical storm.DO NOT expose to dirty or dusty en-vironments. DO NOT operate duringa gas leak.DO NOT expose to strong magneticor electrical fields.DO NOT expose to extreme temperaturesabove 50˚C (122˚F) or to direct sunlight.Do not block the fan vents!DO NOT place on uneven or unstablework surfaces. Seek servicing if thecasing has been damaged.DO NOT place or drop objects on topand do not shove any foreign objectsinto the Notebook PC.DO NOT press or touch the displaypanel. Do not place together with smallitems that may scratch or enter the Note-book PC.DO NOT leave the Notebook PC onyour lap or any part of the body whilethe Notebook PC is turned ON or ischarging in order to prevent discom-fort or injury from heat exposure.DO NOT throw batteries in fires asthey may explode. Check local codesfor special battery disposal instruc-tions.DO NOT expose to extreme tempera-tures (below 0˚C (32˚F), otherwise theNotebook PC may not boot.Safe Operating Temperatures: Thisnotebook PC should be used in envi-ronments with ambient temperaturesbetween 0°C/32°F and 30°C/86°F.30°C/86°F0°C/32°F
5Transportation PrecautionsTo prepare the Notebook PC for transport, you should turn it OFF and disconnect all external periph-erals to prevent damage to the connectors. The hard disk drive’s head retracts when the power isturned OFF to prevent scratching of the hard disk surface during transport. Therefore, you should nottransport the Notebook PC while the power is still ON. Close the display panel and check that it islatched securely in the closed position to protect the keyboard and display panel.Cover Your Notebook PCUse a carrying case such as the one supplied with your Notebook PC to protect it from dirt, water,shock, and scratches.Safety StatementsCharge Your BatteriesIf you intend to use battery power, be sure to fully charge your battery pack and any optional batterypacks before going on long trips. Remember that the power adapter charges the battery pack as long asit is plugged into the computer and an AC power source. Be aware that it takes much longer to chargethe battery pack when the Notebook PC is in use.Airplane PrecautionsContact your airline if you want to use the Notebook PC on the airplane. Most airlines will have restric-tions for using electronic devices. Most airlines will allow electronic use only between and not duringtakeoffs and landings.CAUTION! There are three main types of airport security devices: X-ray machines(used on items placed on conveyor belts), magnetic detectors (used on people walk-ing through security checks), and magnetic wands (hand-held devices used on peopleor individual items). You can send your Notebook PC and diskettes through airport X-ray machines. However, it is recommended that you do not send your Notebook PC ordiskettes through airport magnetic detectors or expose them to magnetic wands.NOTE: The surface glaze is easily dulled if not properly cared for. Be careful not to rubor scrap the Notebook PC surfaces when transporting your Notebook PC.
6DanishDutchEnglishFinnishFrenchGermanGreekItalianPortugueseSpanishSwedishCTR 21 Approval (for Notebook PC with built-in Modem)Safety Statements
7Safety StatementsUL Safety NoticesRequired for UL 1459 covering telecommunications (telephone) equipment intended to be electricallyconnected to a telecommunication network that has an operating voltage to ground that does not exceed200V peak, 300V peak-to-peak, and 105V rms, and installed or used in accordance with the NationalElectrical Code (NFPA 70).When using the Notebook PC modem, basic safety precautions should always be followed to reducethe risk of fire, electric shock, and injury to persons, including the following:•Do not use the Notebook PC near water, for example, near a bath tub, wash bowl, kitchen sink orlaundry tub, in a wet basement or near a swimming pool.•Do not use the Notebook PC during an electrical storm. There may be a remote risk of electric shockfrom lightning.•Do not use the Notebook PC in the vicinity of a gas leak.Required for UL 1642 covering primary (nonrechargeable) and secondary (rechargeable) lithium bat-teries for use as power sources in products. These batteries contain metallic lithium, or a lithium alloy,or a lithium ion, and may consist of a single electrochemical cell or two or more cells connected inseries, parallel, or both, that convert chemical energy into electrical energy by an irreversible or revers-ible chemical reaction.•Do not dispose the Notebook PC battery pack in a fire, as they may explode. Check with local codes forpossible special disposal instructions to reduce the risk of injury to persons due to fire or explosion.•Do not use power adapters or batteries from other devices to reduce the risk of injury to persons due tofire or explosion. Use only UL certified power adapters or batteries supplied by the manufacturer orauthorized retailers.Notebook PC Optical DriveLaser Safety InformationInternal or external optical drives sold with this Notebook PC contains a CLASS 1 LASER PRODUCT(LASER KLASSE 1 PRODUKT). Laser classifications can be found in the glossary at the end of thisuser’s manual.Service warning labelWARNING: Making adjustments or performing procedures other than those specifiedin the user’s manual may result in hazardous laser exposure. Do not attempt to disas-semble the optical drive. For your safety, have the optical drive serviced only by anauthorized service provider.CAUTION: INVISIBLE LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAMOR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS.
8Contents1. Introducing the Notebook PC ................................................................11About This User’s Manual ..................................................................................................... 12Notes For This Manual..................................................................................................... 12Preparing your Notebook PC ................................................................................................ 132. Knowing the Parts.................................................................................. 15Top Side ................................................................................................................................ 16Bottom Side........................................................................................................................... 18Right Side.............................................................................................................................. 20Left Side ................................................................................................................................ 22Front Side.............................................................................................................................. 23Rear Side .............................................................................................................................. 243. Getting Started ....................................................................................... 25Using the Battery Pack..........................................................................................................26Installing and Removing the Battery Pack ....................................................................... 26Charging the Battery Pack ............................................................................................... 27Battery Care ..................................................................................................................... 27Operating Systems................................................................................................................ 27Support Software ............................................................................................................. 27Power Connection ................................................................................................................. 29Powering ON The Notebook PC ...................................................................................... 29The Power-On Self Test (POST)...................................................................................... 29Power Management - “Stand By” & “Hibernate” ................................................................... 30Power Management - “Stand By” & “Hibernate” .............................................................. 30Restarting or Rebooting ........................................................................................................ 31Powering OFF the Notebook PC........................................................................................... 31Restarting or Rebooting ................................................................................................... 31Powering OFF the Notebook PC ..................................................................................... 32Using the Keyboard............................................................................................................... 33Colored Hot Keys ............................................................................................................. 33Microsoft Windows™ Keys .............................................................................................. 34Keyboard as a Numeric Keypad ...................................................................................... 35Keyboard as Cursors ....................................................................................................... 35Instant Launch Keys and Status Indicators ........................................................................... 36Instant Launch Keys ........................................................................................................ 36Status Indicators (above keyboard) ................................................................................. 37Status Indicators (front edge)........................................................................................... 38CD Player Control Buttons and Indicator ......................................................................... 38
94. Using the Notebook PC ......................................................................... 41Pointing Device ..................................................................................................................... 42Using the Touchpad ......................................................................................................... 42Touchpad Usage Illustrations ........................................................................................... 43Caring for the Touchpad ................................................................................................... 44Optical Drive.......................................................................................................................... 45PC Card (PCMCIA) Socket ................................................................................................... 4732-bit CardBus Support ................................................................................................... 47Removing a PC Card (PCMCIA)...................................................................................... 48Inserting a PC Card (PCMCIA) ........................................................................................ 48Flash Memory Card Reader............................................................................................. 49Modem Connection .......................................................................................................... 50Modem and Network Connections ........................................................................................ 51Network Connection (100/10 Base) ................................................................................. 52AC Power System .................................................................................................................53Battery Power System........................................................................................................... 53Charging the Battery Pack ............................................................................................... 53Using Battery Power ........................................................................................................ 54Power Management Modes .................................................................................................. 55Full Power Mode & Maximum Performance .................................................................... 55ACPI................................................................................................................................. 55Suspend Mode ................................................................................................................. 55Power Savings ................................................................................................................. 55Power State Summary ..................................................................................................... 56Thermal Power Control .................................................................................................... 56Notebook PC Upgrades ........................................................................................................ 57System Memory Expansion ............................................................................................. 57Hard Disk Drive Upgrades ............................................................................................... 57Processor Upgrades ........................................................................................................ 57Appendix ..................................................................................................... 59Optional Accessories............................................................................................................. 60USB Hub (Optional) ......................................................................................................... 60USB 2.0 Slim Combo Drive (Optional) ............................................................................. 60Contents
10Wireless LAN Cardbus Card or USB ............................................................................... 61USB Flash Memory Disk .................................................................................................. 61USB Communication Cable ............................................................................................. 61USB Floppy Disk Drive .................................................................................................... 62USB Keyboard and Mouse .............................................................................................. 62Optional Connections ............................................................................................................63Monitor Out Connection ................................................................................................... 63External Audio Connections ............................................................................................. 63Printer Connection ........................................................................................................... 64IEEE1394 Connection...................................................................................................... 64Securing Your Notebook PC ............................................................................................ 64DVD-ROM Drive Information................................................................................................. 65Internal Modem Compliancy ................................................................................................. 66Glossary ................................................................................................................................ 68Notebook PC Information ...................................................................................................... 74Contents
111. Introducing the Notebook PCAbout This User’s ManualNotes For This ManualPreparing your Notebook PC
121 Introducing the Notebook PCAbout This User’s ManualYou are reading the Notebook PC User’s Manual. This User’s Manual provides information on thevarious components in the Notebook PC and how to use them. The following are major sections of thisUser’s Manuals:1. Introducing the Notebook PCIntroduces you to the Notebook PC and this User’s Manual.2. Knowing the PartsGives you information on the Notebook PC’s components.3. Getting StartedGives you information on getting started with the Notebook PC.4. Using the Notebook PCGives you information on using the Notebook PC’s components.5. AppendixIntroduces you to optional accessories and gives additional information.Notes For This ManualThis User’s Manual was created using Macintosh versions of Adobe® PageMaker™ 6.52, Adobe®Photoshop™ 5.5, Adobe® Illustrator® 8.0, and Macromedia® Freehand™ 8.0.1. The body text type usedin this manual is “Times” (MAC) or “Times New Roman” (Windows™) and headings are “Helvetica”(MAC) or “Arial” (Windows™). A few notes and warnings in bold are used throughout this guide thatyou should be aware of in order to complete certain tasks safely and completely. These notes havedifferent degrees of importance as described below:NOTE: Tips and information for spe-cial situations.TIP: Tips and useful information forcompleting tasks.Text enclosed in < > or [ ] represents a key on the keyboard; do not actually type the <> or [ ] and the enclosed letters.< >[ ]WARNING! Important information thatmust be followed for safe operation.IMPORTANT! Vital information thatmust be followed to prevent damageto data, components, or persons.
13Introducing the Notebook PC 1Preparing your Notebook PCThese are only quick instructions for using your Notebook PC. Read the later pages for detailed infor-mation on using your Notebook PC.1. Install the battery pack3. Open the Display Panel 4. Turn ON the Notebook PC2. Connect the AC Power AdapterPress the power button and release.In Windows XP, this button can also be used tosafely turn OFF the Notebook PC.(1) Slide the display release button(2) Lift the display panel with one hand whileholding the system portion with your otherhand.[1][2]1221
141 Introducing the Notebook PC
152. Knowing the PartsTop SideBottom SideRight SideLeft SideFront SideRear Side
162 Knowing the PartsTop SideRefer to the diagram below to identify the components on this side of the Notebook PC. Details are givenstarting from the top and going clockwise.WARNING! When opening, do not force the display panel down to the table or elsethe hinges may break! Never lift the Notebook PC by the display panel!Display PanelKeyboardTouchpadPower Switch /Instant KeysCD Control Buttons(see section 3)Touchpad ButtonsStatus IndicatorsMicrophoneCameraOn selected modelsDisplay Panel LatchOne spring-loaded latch on the front of the Notebook PC locks the display panel in the closed positionwhen the Notebook PC is not in use. To open the display panel, slide the latch with your thumb and liftup the display panel with the same thumb. Slowly tilt the display panel forward or backward to acomfortable viewing angle.
17Knowing the Parts 2LED Status IndicatorsStatus indicator details are described in section 3.Touchpad and ButtonsThe touchpad with its buttons is a pointing device that provides the same functions as a desktop mouse.A software-controlled scrolling function is available after setting up the included touchpad utility toallow easy Windows or web navigation.KeyboardThe keyboard provides full-sized keys with comfortable travel (depth at which the keys can be de-pressed) and palm rest for both hands. Two Windows™ function keys are provided to help ease naviga-tion in the Windows™ operating system.Power SwitchThe power switch allows powering ON and OFF the Notebook PC and recovering from STD. Push theswitch once to turn ON and once to turn OFF the Notebook PC.Instant Launch KeysInstant launch keys allow you to launch frequently used applications with one push of a button. Detailsprovided later in this manual.Display PanelThe display panel functions the same as a desktop monitor. The Notebook PC uses an active matrixTFT LCD, which provides excellent viewing like that of desktop monitors. Unlike desktop monitors,the LCD panel does not produce any radiation or flickering, so it is easier on the eyes.Camera On selected modelsThe built-in camera allows picture taking or video recording. Can be used with voice conferencing andother interactive applications.Microphone (built-in)The built-in mono microphone can be used for video conferencing, voice narrations, or simple audiorecordings.
182 Knowing the PartsBottom SideRefer to the diagram below to identify the components on this side of the Notebook PC. Details aregiven starting from the top and going clockwise.IMPORTANT! The bottom of the Notebook PC can get very hot. Be careful when han-dling the Notebook PC while it is in operation or recently been in operation. Hightemperatures are normal during charging or operation. DO NOT PUT THE NOTEBOOKPC ON THE LAP OR OTHER PARTS OF THE BODY TO AVOID INJURY FROM THE HEAT.Battery PackBattery Lock 2 Battery Lock 1Hard Disk DriveCompartmentMini-PCI andMemoryCompartmentAudio Speaker Audio SpeakerName CardHolderCPU Compartment(Air Vents) (Air Vents)ShutdownButton
19Knowing the Parts 2Hard Disk Drive CompartmentThe hard disk drive is secured in a compartment. Hard disk drive upgrades are to be done by authorizedservice centers or dealers only.Battery LockThe spring loaded latch (lock 1) automatically locks the battery pack when inserted but must be rein-forced with a manually operated latch (lock 2). Usage details are described in the battery section later inthis manual.Battery PackThe battery pack is actually combined with the Notebook PC’s surface in order to reduce thickness.When the battery is released, the surface and battery pack will be seen as a single unit. The battery packcannot be further disassembled and must be replaced as a single unit.Memory CompartmentThe memory compartment contains an expansion slot for additional memory. Memory installation orupgrades must be done by an authorized retailer or else warranty will be void.Air VentsThe air vents allow cool air to enter and warm air to exit the Notebook PC.IMPORTANT! Make sure that paper, books, clothing, cables, or other objects do notblock any of the air vents or else overheating of the Notebook PC may occur.Mini-PCI CompartmentOptional expansion cards can be installed in the mini-PCI compartment. An optional wireless LANmodule enables you to stay connected to your LAN while “roaming” to meeting, conference rooms, orother office locations. Full-time, real-time access to email, Internet, and network resources means notonly an expanded office space, but also greater productivity.Audio SpeakersThe built-in speaker allows you to hear audio without additional attachments. The multimedia soundsystem features an integrated digital audio controller that produces rich, vibrant sound (results im-proved with external stereo headphones or speakers). All audio features are software controlled.
202 Knowing the PartsRight SideRefer to the diagram below to identify the components on this side of the Notebook PC.ModemPortLANPortFlash Memory SlotHeadOutput1394PortPC Card Slot MicInput AudioInputPC CardEject InfraredPort1394 PortIEEE1394 is a high speed serial bus like SCSI but has simple connections and hot-plugging capabilitieslike USB. The interface IEEE1394 has a bandwidth of 100-400 Mbits/sec and can handle up to 63 unitson the same bus. IEEE1394 is also used in high-end digital equipment and should be marked “DV” forDigital Video port.PC Card SlotOne PCMCIA 2.1 compliant PC Card socket is available to support one type I/II PC card. The socketsupports 32-bit CardBus. This allows accommodation of Notebook PC expansion options such as memorycards, ISDN, SCSI, Smart Cards, and wireless network adapters.Flash Memory SlotNormally a PCMCIA or USB memory card reader must be purchased separately in order to use memorycards from devices such as digital cameras, MP3 players, mobile phones, and PDAs. This Notebook PChas a built-in memory card reader that can read the following flash memory cards: Secure Digital (SD),Multi-Media Card (MMC), Memory Stick (MS), Memory Stick Select (MS Select), Memory StickDuo (with MS adapter), Memory Stick Pro, and Memory Stick Pro Duo (with MS Pro adapter). Thebuilt-in memory card reader is not only convenient, but also faster than most other forms of memorycard readers because it utilizes the high-bandwidth PCI bus. More information is provided in section 4of this manual.IMPORTANT! Never remove cards while or immediately after reading, copying, for-matting, or deleting data on the card or else data loss may occur.SIR Port (Standard Infrared)The standard infrared (IrDA) communication port allows convenient wireless data communicationwith infrared-equipped devices or computers. This allows easy wireless synchronization with PDAs ormobile phones and even wireless printing. If your office supports IrDA networking, you can havewireless connection to a network anywhere provided there is a direct line of sight to an IrDA node.
21Knowing the Parts 2Modem PortThe RJ-11 telephone port supports an RJ-11 telephone cable. The internal modem supports up to 56KV.90 transfers. The built-in connector allows convenient use without a dongle.IMPORTANT! The built-in modem does not support the voltage used in digital phonesystems. Do not connect the modem port to a digital phone system or else damagewill occur to the Notebook PC.LAN Port (100/10)The RJ-45 LAN port supports an RJ-45 Ethernet cable. The internal LAN supports 100/10Base-TXstandards. The built-in RJ45 port allows convenient use without a dongle.Microphone Input Jack (Mic In)The mono microphone jack (1/8 inch) can be used to connect an external microphone or output signalsfrom audio devices. Using this jack automatically disables the built-in microphone. Use this feature forvideo conferencing, voice narrations, or simple audio recordings.Headphone Output Jack (Phone Out)The stereo headphone jack (1/8 inch) is used to connect the Notebook PC’s audio out signal to ampli-fied speakers or headphones. Using this jack automatically disables the built-in speakers.Audio Input Jack (Audio In)The stereo input jack (1/8 inch) can be used to connect a stereo audio source to the Notebook PC. Thisfeature is used mainly to add audio to multimedia applications.
222 Knowing the PartsOptical DriveThe Notebook PC comes in various models with different optical drives. The Notebook PC’s opticaldrive may support compact discs (CD) and/or digital video discs (DVD) and may have recordable (R)or re-writable (RW) capabilities. See the marketing specifications for details on each model.Electronic Eject, Emergency EjectThe optical drive eject has an electronic eject button for opening the tray. You can also eject the opticaldrive tray through any software player or by right clicking the optical drive in Windows™ “My Com-puter.” The emergency eject is used to eject the optical drive tray in case the electronic eject does notwork. Do not use the emergency eject in place of the electronic eject. The activity LED (not availableon some models) lights in proportion to the data transferred between the Notebook PC and optical disc.Left SideRefer to the diagram below to identify the components on this side of the Notebook PC.EmergencyEjectElectronicEjectOptical Drive(Locations vary by model)
23Knowing the Parts 2Front SideRefer to the diagram below to identify the components on the front side of the Notebook PC.Status IndicatorsStatus indicator details are described in section 3.Audio SpeakersThe built-in speaker allows you to hear audio without additional attachments. The multimedia soundsystem features an integrated digital audio controller that produces rich, vibrant sound (results im-proved with external stereo headphones or speakers). All audio features are software controlled.Display Panel LatchStatus IndicatorsCD PlayerControl Buttons Audio SpeakerAudio Speaker
242 Knowing the PartsRear SideRefer to the diagram below to identify the components on this side of the Notebook PC.MonitorPort Air VentsUSBPorts ParallelPort Kensington®Lock PortDC PowerInput JackKensington® Lock PortThe Kensington® lock port allows the Notebook PC to be secured using Kensington® compatible Note-book PC security products. These security products usually include a metal cable and lock that preventthe Notebook PC to be removed from a fixed object. Some security products may also include a motiondetector to sound an alarm when moved.USB Port (2.0/1.1)The Universal Serial Bus is compatible with USB 2.0 or USB 1.1 devices such as keyboards, pointingdevices, video cameras, modems, hard disk drives, printers, monitors, and scanners connected in aseries up to 12Mbits/sec (USB 1.1) and 480Mbits/sec (USB 2.0). USB allows many devices to runsimultaneously on a single computer, with peripherals such as USB keyboards and some newer moni-tors acting as additional plug-in sites or hubs. USB supports hot-swapping of devices so that peripher-als can be connected or disconnected without restarting the computer.Power (DC) InputThe supplied power adapter converts AC power to DC power for use with this jack. Power suppliedthrough this jack supplies power to the Notebook PC and charges the internal battery pack. To preventdamage to the Notebook PC and battery pack, always use the supplied power adapter.Display (Monitor) OutputThe 15-pin D-sub monitor port supports a standard VGA-compatible device such as a monitor or pro-jector to allow viewing on a larger external display.Parallel PortThe 25-pin D-sub parallel/printer port supports native parallel devices such as laser/inkjet printers, orparallel-adapted device such as external hard drives, removable drives, or scanners.
253. Getting StartedUsing the Battery PackOperating SystemsPower ConnectionPowering ON The Notebook PCPower ManagementRestarting or RebootingPowering OFF The Notebook PCUsing the KeyboardInstant Launch Keys and Status Indicators
263 Getting StartedUsing the Battery PackInstalling and Removing the Battery PackYour Notebook PC may or may not have its battery pack installed. If your Notebook PC does not haveits battery pack installed, use the following procedures to install the battery pack.To install the battery pack:1. Insert the battery pack as shown.2. A spring lock will catch the battery pack.3. Slide the battery lock to the lock position.To remove the battery pack:1. Slide the battery lock to the unlock position.2. Slide the sping lock to unlock and hold.3. Remove the battery pack.IMPORTANT! Never attempt to remove the battery pack while the Notebook PC isturned ON, as this may result in the loss of working data.IMPORTANT! Only use battery packs and power adapters supplied with this Note-book PC or specifically approved by the manufacturer or retailer for use with thismodel or else damage may occur to the Notebook PC.132132
27Getting Started 3Charging the Battery PackBefore you use your Notebook PC on the road, you will have to charge the battery pack. The batterypack begins to charge as soon as the Notebook PC is connected to external power. Fully charge thebattery pack before using it for the first time. A new battery pack must completely charge before theNotebook PC is disconnected from external power. It takes a few hours to fully charge the battery whenthe Notebook PC is turned OFF and may take twice the time when the Notebook PC is turned ON. Thebattery charge light turns OFF when the battery pack is charged.Battery CareThe Notebook PC’s battery pack, like all rechargeable batteries, has a limit on the number times it canbe recharged. Fully draining and charging the battery once a day every day will last over a year but howlong beyond that will depend on your environment temperature, humidity, and how your Notebook PCis used. It is ideal that the battery be used in a temperature range between 10˚C and 29˚C (50˚F and85˚F). You must also take into account that the Notebook PC’s internal temperature is higher than theoutside temperature. Any temperatures above or below this range will shorten the life of the battery.But in any case, the battery pack’s usage time will eventually decrease and a new battery pack must bepurchased from an authorized dealer for this Notebook PC. Because batteries also have a shelf life, it isnot recommended to buy extras for storing.Note: When the battery pack is not in use, you must fully charge it every three months.Operating SystemsThis Notebook PC may offer (depending on territory) its customers the choice of a pre-installed oper-ating system such as Microsoft Windows XP. The choices and languages will depend on the territory.The levels of hardware and software support may vary depending on the installed operating system.The stability and compatibility of other operating systems cannot be guaranteed.Support SoftwareThis Notebook PC comes with a support CD that provides BIOS, drivers and applications to enablehardware features, extend functionality, help manage your Notebook PC, or add functionality not pro-vided by the native operating system. If updates or replacement of the support CD is necessary, contactyour dealer for web sites to download individual software drivers and utilities.The support CD contains all drivers, utilities and software for all popular operating systems includingthose that have been pre-installed. The support CD does not include the operating system itself. Thesupport CD is necessary even if your Notebook PC came pre-configured in order to provide additionalsoftware not included as part of the factory pre-install.A recovery CD is optional and includes an image of the original operating system installed on the harddrive at the factory. The recovery CD provides a comprehensive recovery solution that quickly restoresthe Notebook PC’s operating system to its original working state provided that your hard disk drive isin good working order. Contact your retailer if you require such a solution.
283 Getting StartedNOTE: This Notebook PC may come with either a two or three-prong plug dependingon territory. If a three-prong plug is provided, you must use a grounded AC outlet oruse a properly grounded adapter to ensure safe operation of the Notebook PC.With the AC power cord connected to the AC-DC converter, connect the AC power cord to an AC outlet(preferably with surge-protection) and then connect the DC plug to the Notebook PC. Connecting theAC-DC adapter to the AC outlet first allows you to test the AC outlet’s power and the AC-DC converteritself for compatibility problems before connecting the DC power to the Notebook PC. The greenpower LED on the adapter lights up if the power is within accepted ranges.TIP: You can buy travel kits for the Notebook PC that includes power and modemadapters for almost every country.IMPORTANT! Damage may occur if you use a different adapter to power the Note-book PC or use the Notebook PC’s adapter to power other electrical devices. If thereis smoke, burning scent, or extreme heat coming from the AC-DC adapter, seek ser-vicing. Seek servicing if you suspect a faulty AC-DC adapter. You may damage bothyour battery pack(s) and the Notebook PC with a faulty AC-DC adapter.[1][2]Power ConnectionYour Notebook PC comes with a universal AC-DC adapter. That means that you may connect thepower cord to any 100V-120V as well as 220V-240V outlets without setting switches or using powerconverters. Different countries may require that an adapter be used to connect the provided US-stan-dard AC power cord to a different standard. Most hotels will provide universal outlets to support differ-ent power cords as well as voltages. It is always best to ask an experienced traveler about AC outletvoltages when bringing power adapters to another country.
29Getting Started 3The Power-On Self Test (POST)When you turn ON the Notebook PC, it will first run through a series of software-controlled diagnostictests called the Power-On Self Test (POST). The software that controls the POST is installed as apermanent part of the Notebook PC’s architecture. The POST includes a record of the Notebook PC’shardware configuration, which is used to make a diagnostic check of the system. This record is createdby using the BIOS Setup program. If the POST discovers a difference between the record and theexisting hardware, it will display a message on the screen prompting you to correct the conflict byrunning BIOS Setup. In most cases the record should be correct when you receive the Notebook PC.When the test is finished, you may get a message reporting “No operating system found” if the harddisk was not preloaded with an operating system. This indicates that the hard disk is correctly detectedand ready for the installation of a new operating system.The S.M.A.R.T. (Self Monitoring and Reporting Technology) checks the hard disk drive during POSTand gives a warning message if the hard disk drive requires servicing. If any critical hard disk drivewarning is given during bootup, backup your data immediately and run Windows disk checking program.To run Window’s disk checking program: (1) right-click any hard disk drive icon in “My Computer”, (2)choose Properties, (3) click the Tools tab, (4) click Check Now, (5) select a hard disk drive, (6) selectThorough to also check for physical damages, and (7) click Start. Third party disk utilities such as Symantec’sNorton Disk Doctor can also perform the same functions but with greater ease and more features.Powering ON The Notebook PCThe Notebook PC’s power-ON message appears on the screen when you turn it ON. If necessary, you mayadjust the brightness by using the hot keys. If you need to run the BIOS Setup to set or modify the systemconfiguration, press [F2] upon bootup to enter the BIOS Setup. If you press [Tab] during the splashscreen, standard boot information such as the BIOS version can be seen. Press [ESC] and you will bepresented with a boot menu with selections to boot from your available drives.NOTE: Before bootup, the display panel flashes when the power is turned ON. This ispart of the Notebook PC’s test routine and is not a problem with the display.IMPORTANT! If warnings are still given during bootup after running a software diskchecking utility, you should take your Notebook PC in for servicing. Continued usemay result in data loss.IMPORTANT! Never turn OFF or reset your Notebook PC while the hard disk or floppydisk is in use and the activity LED is flashing; doing so can result in loss or destruc-tion of your data. To protect the hard disk drive, always wait at least 5 seconds afterturning OFF your Notebook PC before turning it back ON.
303 Getting StartedPower Management - “Stand By” & “Hibernate”Power management settings can be found in the Windows control panel. The following shows thepower options properties in Windows. You can define “Stand By” or “Shut down” for closing thedisplay panel, pressing the power button, or activating sleep mode. “Stand by” and “Hibernate” savespower when your Notebook PC is not in use by turning OFF certain components. When you resumeyour work, your last status (such as a document scrolled down half way or email typed half way willreappear as if you never left. “Shut down” will close all applications and ask if you want to save yourwork if any are not saved.“Stand by” is the same as Suspend-to-RAM (STR). Thisfunction stores your current data and status in RAM whilemany components are turned OFF. Because RAM is vola-tile, it requires power to keep (refresh) the data. To operate:select “Start” | “Shut down”, and “Stand by”.“Hibernate” is the same as Suspend-to-Disk (STD) andstores your current data and status on the hard disk drive.By doing this, RAM does not have to be periodically re-freshed and power consumption is greatly reduced but notcompletely eliminated because certain wake-up componentslike LAN and modem needs to remain powered. “Hibernate”saves more power compared to “Stand by”. To operate: En-able hibernation in “Power Options” and select “Start” | “Shutdown”, and “Hibernate”.
31Getting Started 3Restarting or RebootingAfter making changes to your operating system, you may be prompted to restart the system. Someinstallation processes will provide a dialog box to allow restart. To restart the system manually:Click the Start button and select Shut Down | and choose Restart.In case the operating system hangs (stops, freezes, crashes), try a “warm boot” by pressing [Ctrl][Alt][Del]keys simultaneously. (You may try a few times if there is no response.)The screens are different depending on your security settings.
323 Getting StartedPowering OFF the Notebook PCIn Windows XP, the Notebook PC can be powered OFF by using Start | Shut Down... | Turn off (orShut down). For operating systems without proper power management (DOS, Windows NT), youmust power OFF the Notebook PC by holding the power switch for 2 seconds (as opposed to 1 secondto power ON) after closing applications and exiting operating systems. Holding the power switch for 2seconds is necessary in order to prevent accidental power-OFFs.The screens are different depending on your security settings.Emergency ShutdownIn case your operating system cannot properly turn OFF or restart, there are two additional ways toshutdown your Notebook PC:(1) Hold the power button over 4 seconds, or (2) Press the shutdown button .TIP: Use a straightened paper clip topress the shutdown button.
33Getting Started 3Using the KeyboardColored Hot KeysThe following defines the colored hot keys on the Notebook PC’s keyboard. The colored commands can onlybe accessed by first pressing and holding the function key while pressing a key with a colored command.NOTE: The Hot Key locations on the function keys may vary depending on model butthe functions should remain the same. Follow the icons instead of the function keys.“Z” Icon (F1): Places the Notebook PC in suspend mode (either Save-to-RAM or Save-to-Disk depending on sleep button setting in power management setup).(F2): Wireless Models Only: Toggles the internal wireless LAN ON and OFF. Whenenabled, the wireless LAN LED will light. Windows software settings are necessary touse the wireless LAN.Filled Sun Icon (F5):Decreases the display brightnessOpen Sun Icon (F6):Increases the display brightnessLCD Icon (F7): Toggles the display panel ON and OFF. This also stretches your screenarea (on certain models) to fill the entire display when using low resolution modes.LCD/Monitor Icons (F8): Toggles between the Notebook PC’s LCD display and an ex-ternal monitor in this series: Notebook PC LCD -> External Monitor -> Both. (This func-tion does not work in 256 Colors, select High Color in Display Property Settings.) IM-PORTANT: Connect an external monitor before booting up the Notebook PC.Speaker Icons (F10):Toggles the speakers ON and OFF (only in Windows OS)Down Speaker Icon (F11):Decreases the speaker volume (only in Windows OS)Up Speaker Icon (F12):Increases the speaker volume (only in Windows OS)Num Lk (Ins): Toggles the numeric keypad (number lock) ON and OFF. Allows you touse a larger portion of the keyboard for number entering.Scr Lk (Del): Toggles the “Scroll Lock” ON and OFF. Allows you to use a larger portionof the keyboard for cell navigation.
343 Getting StartedKeyboard as a Numeric KeypadThe numeric keypad is embedded in the keyboard and consists of 15 keys that make number intensiveinput more convenient. These dual-purpose keys are labeled in orange on the key caps. Numeric as-signments are located at the upper right hand corner of each key as shown in the figure. When thenumeric keypad is engaged by pressing , the number lock LED lights up. If an external key-board is connected, pressing the on the external keyboard enables/disables the NumLock on bothkeyboards simultaneously. To disable the numeric keypad while keeping the keypad on an externalkeyboard activated, press the keys on the Notebook PC.NOTE: The large bold characters and symbols are printed here for your reference.They are not labeled on the keyboard as shown here.Microsoft Windows™ KeysThere are two special Windows™ keys on the keyboard as described below.The key with the Windows™ Logo activates the Start menu located at the bottom left of theWindows™ desktop.The other key, that looks like a Windows™ menu with a small cursor, activates the propertiesmenu and is equivalent to pressing the right mouse button on a Windows™ object.
35Getting Started 3Keyboard as CursorsThe keyboard can be used as cursors while Number Lock is ON or OFF in order to increase navigationease while entering numeric data in spreadsheets or similar applications.With Number Lock OFF, press and one of the cursor keys shown below. For example [Fn][8] forup, [Fn][K] for down, [Fn][U] for left, and [Fn][O] for right.With Number Lock ON, use [Shift] and one of the cursor keys shown below. For example [Shift][8]for up, [Shift][K] for down, [Shift][U] for left, and [Shift][O] for right.NOTE: The large bold characters and symbols are printed here for your reference.They are not labeled on the keyboard as shown here.
363 Getting StartedInstant Launch Keys and Status IndicatorsInstant Launch KeysEmail Launch KeyPressing this button will launch your Email application while Windows is running.Internet Launch KeyPressing this button will launch your Internet browser application while Windows is running.Power4 Gear+ KeyThe Power4 Gear+ button toggles power savings between various power saving modes. The powersaving modes control many aspects of the Notebook PC to maximize performance versus battery timeduring various events.Power4 Gear+ ModesWhen you are using an AC power adapter, Power4 Gear+ will switch between three modes in the ACpower mode segment. When you remove the AC adapter, Power4 Gear+ will switch between sevenmodes in the battery (DC) mode segment. When you remove or apply the AC adapter, Power4 Gear+will automatically shift you up or down into the proper mode segment (AC or DC).SuperPerformance HighPerformance GamePerformance DVD MoviePerformance Email/OfficePerformance PresentationPerformance Audio ListeningPerformance Battery-SavingPerformanceModeNamesTaskbarIconsAC AC/DC AC/DC DC DC DC DC DCPowerSegmentPad-Lock KeyPressing this button will lock your touchpad when using an external mouse. Locking the touchpad willprevent you from accidentally moving the cursor while typing. To enable the touchpad, simply pressthis button again.
37Getting Started 3Status Indicators (above keyboard)Drive Activity IndicatorIndicates that the Notebook PC is accessing one or more storage device(s) such as the hard disk. Thelight flashes proportional to the access time.Number LockIndicates that number lock [Num Lk] is activated when lighted. Number lock allows some of the key-board letters to act as numbers for easier numeric data input.Capital LockIndicates that capital lock [Caps Lock] is activated when lighted. Capital lock allows some of thekeyboard letters to type using capitalized letters (e.g. A, B, C). When the capital lock light is OFF, thetyped letters will be in the lower case form (e.g. a,b,c).Scroll LockIndicates that scroll lock [Scr Lk] is activated when lit. Scroll lock allows some of the keyboard lettersto act as direction keys in order to allow easier navigation when only a part of the keyboard is required,such as for playing games.
383 Getting StartedStatus Indicators (front edge)Power IndicatorThe green LED lights to indicate that the Notebook PC is turned ON and blink when the Notebook PCis in the Suspend-to-RAM (Standby) mode. This LED is OFF when the Notebook PC is OFF or in theSuspend-to-Disk (Hibernation) mode.Battery Charge IndicatorThe battery charge indicator is an LED that shows the status of the battery’s power as follows:ON: The Notebook PC’s battery is chargingOff: The Notebook PC’s battery is charged or completely drainedEmail IndicatorFlashes when there is one or more new email(s) in your email program’s inbox. This function requiressoftware setup and may not be currently configured on your Notebook PC. This function is designedfor Microsoft email software only and may not work with email software from other companies.Wireless LAN Indicator (Optional)This indicator is only applicable on models with internal wireless LAN. When the internal wirelessLAN is enabled, this indicator will light. (Windows software settings are necessary to use the wirelessLAN.)
39Getting Started 3CD Player Control Buttons and IndicatorThere are several CD control buttons integrated externally on the Notebook PC for convenient CDplaying. The buttons activate and control your operating system’s audio player when the Notebook PCis ON. When your Notebook PC is OFF, the CD control buttons activate a CD player function thatallows you to listen to audio CDs even while the Notebook PC is not turned ON. The following definesthe meaning of each CD control button and indicator on the front of the Notebook PC.CD Power SwitchWhile the Notebook PC is OFF: Turns ON or OFF the CD player.CD Player Power Indicator (front side)While the Notebook PC is OFF: This LED lights when the CD player is turned ON (by using the “CDPower Switch”).CD Skip to Previous Track (Rewind) & Audio Volume DownDuring CD play, this button has two functions:Track: The first push will restart the current track. The second push will skip to the previous track.Audio: Hold down to decrease audio volume.CD Skip to Next Track (Fast Forward) & Audio Volume UpDuring CD play, this button has two functions:Track: Push once to skip to the next track during CD playing.Audio: Hold down to increase audio volume.CD StopDuring CD play: Stops CD play.CD Play/PauseDuring CD stop, begins CD play.During CD play, pauses CD play.Audio Volume ControlsFn + Speaker Icons (F10): Toggles the audio volume ON and OFFFn + Down Speaker Icon (F11): Decreases the audio volumeFn + Up Speaker Icon (F12): Increases the audio volume
403 Getting Started
414. Using the Notebook PCPointing DeviceOptical DriveFlash Memory Card ReaderPC Card (PCMCIA) SocketModem and Network ConnectionsIR Wireless CommunicationAC Power SystemBattery Power SystemPower Management ModesNotebook PC Upgrades
424 Using the Notebook PCCursorMovementRight ClickLeft ClickUsing the TouchpadLight pressure with the tip of your finger is all that isrequired to operate the touchpad. Because the touch-pad is electrostatic sensitive, objects cannot be usedin place of your fingers. The touchpad’s primary func-tion is to move the cursor around or select items dis-played on the screen with the use of your fingertip.The following illustrations demonstrate proper use ofthe touchpad.Moving The CursorPlace your finger in the center of the touchpad and slide in a direction to move the cursor.Up - Slide finger forwardLeft - Slidefinger leftDown - Slide finger backwardRight - Slidefinger rightIMPORTANT! Do not use any objects inplace of your finger to operate the touch-pad or else damage may occur to thetouchpad’s surface.Pointing DeviceThe Notebook PC’s integrated touchpad pointing de-vice is fully compatible with all two/three-button andscrolling knob PS/2 mice. The touchpad is pressure sen-sitive and contains no moving parts; therefore, mechani-cal failures can be avoided. A device driver is still re-quired for working with some application software.
43Using the Notebook PC 4Double-clicking/Double-tapping - This is a common skill for launching a program directly from thecorresponding icon you select. Move the cursor over the icon you wish to execute, press the left buttonor tap the pad twice in rapid succession, and the system launches the corresponding program. If theinterval between the clicks or taps is too long, the operation will not be executed. You can set thedouble-click speed using the Windows Control Panel “Mouse.” The following 2 examples produce thesame results.(press the left button twice and release) (lightly but rapidly strike the touchpad twice)(press the left cursor button and release) (lightly but rapidly strike the touchpad)Clicking/Tapping - With the cursor over an item, press the left button or use your fingertip to touch thetouchpad lightly, keeping your finger on the touchpad until the item is selected. The selected item willchange color. The following 2 examples produce the same results.Clicking TappingDouble-Clicking Double-TappingTouchpad Usage Illustrations
444 Using the Notebook PCCaring for the TouchpadThe touchpad is pressure sensitive. If not properly cared for, it can be easily damaged. Take note of thefollowing precautions.• Make sure the touchpad does not come into contact with dirt, liquids or grease.• Do not touch the touchpad if your fingers are dirty or wet.• Do not rest heavy objects on the touchpad or the touchpad buttons.• Do not scratch the touchpad with your finger nails or any hard objects.Dragging - Dragging means to pick up an item and place it anywhere on the screen you wish. You canmove the cursor over the item you select, and while keeping the left button depressed, moving thecursor to the desired location, then release the button. Or, you can simply double-tap on the item andhold while dragging the item with your fingertip. The following 2 examples produce the same results.(hold left button and slide finger on touchpad) (lightly strike the touchpad twice, sliding fingeron touchpad during second strike)Dragging-Clicking Dragging-TappingNOTE: A software-controlled scrolling function is available after setting up the in-cluded touchpad utility to allow easy Windows or web navigation. Basic functionscan be adjusted at the Windows control panel to allow comfortable clicking and tap-ping.NOTE: The touchpad responds to movement not to force. There is no need to tap thesurface too hard. Tapping too hard does not increase the responsiveness of the touch-pad. The touchpad responds best to light pressure.
45Using the Notebook PC 4Optical DriveInserting an optical disc1. While the Notebook PC’s power is ON,press the drive’s eject button and the traywill eject out partially.2. Gently pull on the drive’s front panel and slidethe tray completely out. Be careful not to touchthe CD drive lens and other mechanisms.Make sure there are no obstructions that mayget jammed under the drive’s tray.3. Hold the disc by the edge and face the disc’sprinted side up. Push down on both sides ofthe disc’s center until the disc snaps ontothe hub. The hub should be higher thanthe disc when correctly mounted.4. Slowly push the drive’s tray back in. The drivewill begin reading the table of contents (TOC)on the disc. When the drive stops, the disc isready to be used.NOTE: It is normal to hear as well as feel the CD spinning with great intensity in theCD drive while data is read.1241
464 Using the Notebook PCA CD drive letter should be present regardless of the presence of a CD disc in the drive. After the CD isproperly inserted, data can be accessed just like with hard disk drives; except that nothing can bewritten to or changed on the CD. Using the proper software, a CD-RW drive or DVD+CD-RW drivecan allow CD-RW discs to be used like a hard drive with writing, deleting, and editing capabilities.Vibration is normal for all high-speed optical drives due to unbalanced CDs or CD print. To decreasevibration, use the Notebook PC on an even surface and do not place labels on the CD.Listening to Audio CDThe optical drives can play audio CDs, but only the DVD-ROM drive can play DVD audio. Insert theaudio CD and Windows™ automatically opens an audio player and begins playing. Depending on theDVD audio disc and installed software, it may require that you open a DVD player to listen to DVDaudio. You can adjust the volume using hotkeys or Windows™ speaker icon on the taskbar.Using the Optical DriveOptical discs and equipment must be handled with care because of the precise mechanics involved.Keep in mind the important safety instructions from your CD suppliers. Unlike desktop optical drives,the Notebook PC uses a hub to hold the CD in place regardless of the angle. When inserting a CD, it isimportant that the CD be pressed onto the center hub or else the optical drive tray will scratch the CD.WARNING! If the CD disc is not properly locked onto the center hub, the CD can bedamaged when the tray is closed. Always watch the CD closely while closing the trayslowly to prevent damage.Optical Drive (Cont’)Removing an optical disc1. While the Notebook PC’s power is ON, pressthe drive’s eject button and the tray will ejectout partially.2. Gently pry the edge of the disc upwards at anangle to remove the disc from the hub.31
47Using the Notebook PC 4PC Card (PCMCIA) SocketThe Notebook PC supports PC Cards (or sometimes referred to as PCMCIA cards) to allow expansionlike PCI cards on desktop computers. This allows you to customize your Notebook PC to meet a widerange of application needs. The PCMCIA socket can interface with type I or type II PC cards. PCcards are about the size of a few stacked credit cards and have a 68-pin connector at one end. The PCCard standard accommodates a number of function, communication, and data storage expansion op-tions. PC cards come in memory/flash cards, fax/modems, networking adapters, SCSI adapters, MPEGI/II decoder cards, Smart Cards, and even wireless modem or LAN cards. The Notebook PC supportsPCMCIA 2.1, and 32-bit CardBus standards.The three different PC Card standards actually have different thicknesses. Type I cards are 3.3mm,Type II cards are 5mm, and Type III cards are 10.5mm thick. Type I and Type II cards can be used in asingle socket and Type III cards take up two sockets. Type III cards are only supported on NotebookPC’s with two PC card sockets.32-bit CardBus SupportCardBus support allows PC Cards and their hosts to use 32-bit bus mastering and operate at speeds ofup to 33MHz, transferring data in burst modes comparable with PCI’s 132MB/sec. By comparison, thestandard 16-bit PC Card bus can handle only 20MB/sec. Since the Notebook PC is equipped withCardBus broader and faster data pathway, it can handle bandwidth-hungry operations, such as 100MbpsFast Ethernet, Fast SCSI peripherals, and ISDN-based video conference. The CardBus peripherals sup-port plug and play.The CardBus socket is backward-compatible with 16-bit PC Cards serving at 5 volts operation whileCardBus operates at 3.3 volts to reduce power consumption.
484 Using the Notebook PCInserting a PC Card (PCMCIA)1. If there is a PC Card socket protector, remove it using the “Removing a PC Card” instructionsbelow.2. Insert the PC card with the connector side first and label side up. Standard PC cards will be flushwith the Notebook PC when fully inserted.3. Carefully connect any cables or adapters needed by the PC card. Usually connectors can only beinserted in one orientation. Look for a sticker, icon, or marking on one side of the connector repre-senting the top side.1. Press in the toggle eject button and release.The recessed spring loaded toggle button willextend when pushed in and released.2. Press the extended button again to eject the PCCard. Carefully pull the ejected PC card out ofthe socket.Removing a PC Card (PCMCIA)To remove the PC card, first remove all cables or adapters attached to the PC card, then double-click thePC card icon on the Windows taskbar and stop the PC card you want to remove.5341Be sure the PC card islevel when inserting.2
49Using the Notebook PC 4Flash Memory Card ReaderNormally a PCMCIA memory card reader must be purchased separately in order to use memory cardsfrom devices such as digital cameras, MP3 players, mobile phones, and PDAs. This Notebook PC hasa single built-in memory card reader that can read the following flash memory cards: Secure Digital(SD), Multi-Media Card (MMC), Memory Stick (MS), Memory Stick Select (MS Select), MemoryStick Duo (with MS adapter), Memory Stick Pro, and Memory Stick Pro Duo (with MS Pro adapter).Memory Sticks may be standard or with MagicGate technology. The built-in memory card reader is notonly convenient, but also faster than most other forms of memory card readers because it utilizes thehigh-bandwidth PCI bus.IMPORTANT! Never remove cards while or immediately after reading, copying, for-matting, or deleting data on the card or else data loss may occur.MS (Memory Stick)Duo/Pro/Duo Pro/MGMS (Memory Stick)SelectMS (Memory Stick)Magic Gate (MG)MS (Memory Stick)MS adapterMMC (Multimedia Card)SD (Secure Digital)Supported Memory TypesSD / MMCMS (Memory Stick)
504 Using the Notebook PCNOTE: The built-in modem and network cannot be installed later as an upgrade. Mo-dem and/or network can be installed as a PC card (PCMCIA).Modem and Network ConnectionsThe built-in modem and network model comes with both an RJ-11 and an RJ-45 port. RJ-11 telephonecables have two or four wires and are used to connect telephones to telephone outlets found in the walls ofresidential homes and some commercial buildings (some commercial buildings may have telephone wir-ing designed for dedicated phone systems that may not be compatible). RJ-45 network cables are foundconnecting network computers to network hubs or switches usually found in business environments.IMPORTANT! Only use analog telephone outlets. The built-in modem does not sup-port the voltage used in digital phone systems. Do not connect the RJ-11 to digitalphone systems found in many commercial buildings or else damage will occur!
51Using the Notebook PC 4CAUTION: For electrical safety concerns, only use telephone cables rated 26AWG orhigher. (see Glossary for more information)NOTE: When you are connected to an online service, do not place the Notebook PC insuspend (or sleep mode) or else you will disconnect the modem connection.WARNING! Only use analog telephone outlets. The built-in modem does not supportthe voltage used in digital phone systems. Do not connect the RJ-11 to digital phonesystems found in many commercial buildings or else damage will occur!Modem ConnectionThe telephone wire used to connect the Notebook PC’s internal modem should have either two or fourwires (only two wires (telephone line #1) is used by the modem) and should have an RJ-11 connectoron both ends. Connect one end to the modem port and the other end to an analog telephone wall socket(the ones found in residential buildings). Once the driver is setup, the modem is ready to use.This is an example of the Notebook PC connectedto a telephone jack for use with the built-in modem.TelephoneWall Jack Telephone cableswith RJ-11 connectors Telephoneconnection isoptional
524 Using the Notebook PCNetwork Hub or SwitchNetwork cable withRJ-45 connectorsThis is an example of the Notebook PC connected to a NetworkHub or Switch for use with the built-in Ethernet controller.Network Connection (100/10 Base)Connect a network cable, with RJ-45 connectors on each end, to the modem/network port on the Note-book PC and the other end to a hub or switch. For 100/10BASE-TX speeds, your network cable must becategory 5 or better (not category 3) with twisted-pair wiring. If you plan on running the interface at100/10Mbps, it must be connected to a 100/10BASE-TX hub (not a BASE-T4 hub). For 10Base-T, usecategory 3, 4, or 5 twisted-pair wiring. Duplex transfers (200/20Mbps) is supported on this NotebookPC but requires connection to a network switching hub with “duplex” enabled. The software default isto use the fastest setting so no user-intervention is required.Twisted-Pair CableThe cable used to connect the Ethernet card to a host (generally a Hub or Switch) is called a straight-through Twisted Pair Ethernet (TPE). The end connectors are called RJ-45 connectors, which are notcompatible with RJ-11 telephone connectors. If connecting two computers together without a hub inbetween, auto-crossover is supported on this Notebook PC so a crossover LAN cable is not required.
53Using the Notebook PC 4AC Power SystemThe Notebook PC power is comprised of two parts, the power adapter and the battery power system.The power adapter converts AC power from a wall outlet to the DC power required by the NotebookPC. The battery pack consists of a set of battery cells housed together. The AC Adapter’s primaryfunction is to provide power to the Notebook PC which also charges the battery pack. When the poweradapter is connected to the Notebook PC, it provides power to the Notebook PC and charges the inter-nal battery at the same time as long as it is plugged into an electrical outlet.IMPORTANT! To protect your Notebook PC from damage, use only the power adapterthat came with this Notebook PC because each power adapter has its own poweroutput ratings.NOTE: The battery stops charging if the temperature is too high or the battery voltageis too high. BIOS provides a smart battery refreshing function.Battery Power SystemThe Notebook PC is designed to work with a removable battery pack. A fully charged pack will provideseveral hours of battery life, which can be further extended by using power management features throughthe BIOS setup. The battery system implements the Smart Battery standard under the Windows envi-ronment, which allows the battery to accurately report the amount of charge percentage left in thebattery. Additional battery packs are optional and can be purchased separately through a Notebook PCretailer. Before using the Notebook PC on battery power for the first time, check the battery icon in theWindows task bar to make sure that the battery is fully charged. Charging the battery takes a few hourswhen the Notebook PC is powered OFF.Charging the Battery PackYou can charge the battery pack by using the power adapter. When the power adapter is plugged in, theinserted battery pack automatically recharges whether your Notebook PC is ON or OFF. It takes a fewhours to receive a full charge when the power is OFF but takes twice as long when the Notebook PC isin use. The battery is charging when the orange LED is solid. When the LED is OFF, the battery pack ischarged.
544 Using the Notebook PCWARNING! Suspend-to-RAM (STR) does not last long when the battery power is de-pleted. Suspend-to-Disk (STD) is not the same as power OFF. STD requires a smallamount of power and will fail if no power is available due to complete battery deple-tion or no power supply (e.g. removing both the power adapter and battery pack).NOTE: If you ignore the low battery warning, eventually the Notebook PC enters sus-pend mode (Windows default uses STR).WARNING! Never attempt to remove the battery pack while the power is ON, or if thesystem has not yet entered into the suspend mode as this may result in the data loss.Using Battery PowerA fully-charged battery pack provides the Notebook PC a few hours of working power. But the actualfigure varies depending on how you use the power saving features, your general work habits, the CPU,system memory size, and the size of the display panel.Checking Battery PowerTo check the remaining battery power, move your cursor over the power icon. The power icon is a“battery” when not using AC power and a “plug” when using AC power. Double click on the icon formore information and settings.Move your mouse over the battery icon forremaining power information. Right-click the battery icon for sub-menus.When the AC power is connected,charging status will be shown.Left-click the battery icon for powermanagement settings.
55Using the Notebook PC 4Power Management ModesThe Notebook PC has a number of automatic or adjustable power saving features that you can use tomaximize battery life and lower Total Cost of Ownership (TCO). You can control some of these fea-tures through the Power menu in the BIOS Setup. ACPI power management settings are made throughthe operating system. The power management features are designed to save as much electricity aspossible by putting components into a low power consumption mode as often as possible but also allowfull operation on demand. These low power modes are referred to as “Stand by” (or Suspend-to-RAM)and “Hibernation” mode or Suspend-to-Disk (STD). The Standby mode is a simple function providedby the operating system. When the Notebook PC is in either one of the power saving modes, the statuswill be shown by the following: “Stand by”: Power LED Blinks and “Hibernation”: Power LED OFF.Full Power Mode & Maximum PerformanceThe Notebook PC operates in Full Power mode when the power management function is disabled byconfiguring Windows power management and SpeedStep. When the Notebook PC is operating in FullPower Mode, the Power LED remains ON. If you are conscious of both system performance and powerconsumption, select “Maximum Performance” instead of disabling all power management features.ACPIAdvanced Configuration and Power Management (ACPI) was developed by Intel, Microsoft, and Toshibaespecially for Windows and later to control power management and Plug and Play features. ACPI is thenew standard in power management for Notebook PCs.NOTE: APM was used in older operating systems like Windows NT4 and Windows 98.Because newer operating systems like Windows XP, Windows 2000, and Windows MEutilize ACPI, APM is no longer fully supported on this Notebook PC.Suspend ModeIn “Stand by” (STR) and “Hibernation” (STD), the CPU clock is stopped and most of the Notebook PCdevices are put in their lowest active state. The suspend mode is the lowest power state of the NotebookPC. The Notebook PC enters suspend mode when the system remains idle for a specified amount of timeor manually using the [Fn][F1] keys. The Power LED blinks when the Notebook PC is in STR mode. InSTD mode, the Notebook PC will appear to be powered OFF. Recover from STR by pressing anykeyboard button (except Fn). Recover from STD by using the power switch (just like poweringON the Notebook PC).Power SavingsIn addition to reducing the CPU clock, this mode puts devices including the LCD backlight in theirlower active state. The Notebook PC enters “Stand by” mode (low priority) when the system remainsidle for a specified amount of time. The timeout can be set through Windows power management (higherpriority). To resume system operation, press any key.
564 Using the Notebook PCThermal Power ControlThere are three power control methods for controlling the Notebook PC’s thermal state. These powercontrol cannot be configured by the user and should be known in case the Notebook PC should enterthese states. The following temperatures represent the chassis temperature (not CPU).• The fan turns ON for active cooling when the temperature reaches the safe upper limit.• The CPU decreases speed for passive cooling when the temperature exceeds the safe upper limit.• The system shut down for critical cooling when temperature exceeds the maximum safe upper limit.Power State SummarySTATE ENTRY EVENT EXIT EVENT“Stand by” • “Stand by” through Windows Start button, • Any device• Timer as set though “Power Management” • Battery low in Windows Control Panel (higher priority)STR (“Stand by”) • Hotkey [Fn][F1] • Signal from modem port(Suspend-to-RAM) -- • Power button • Any keySTD (“Hibernate”) • Hotkey [Fn][F1] • Power button(Suspend-to-Disk) -- • Battery Extremely LowSoft OFF • Power button (can be defined as STR or STD) • Power button• “Shut down” through Windows Start buttonPower4 Gear+ ModesWhen you are using an AC power adapter, Power4 Gear+ will switch between three modes in the ACpower mode segment. When you remove the AC adapter, Power4 Gear+ will switch between sevenmodes in the battery (DC) mode segment. When you remove or apply the AC adapter, Power4 Gear+will automatically shift you up or down into the proper mode segment (AC or DC).SuperPerformance HighPerformance GamePerformance DVD MoviePerformance Email/OfficePerformance PresentationPerformance AudioListeningPerformanceBattery-SavingPerformanceModeNamesTaskbarIconsAC AC/DC AC/DC DC DC DC DC DCPowerSegment
57Using the Notebook PC 4Notebook PC UpgradesSystem Memory ExpansionAdditional memory will increase application performance by decreasing hard disk access. This is morenoticeable on newer software that require more and more system resources. The BIOS automaticallydetects the amount of memory in the system and configures CMOS accordingly during the POST(Power-On-Self-Test) process. There is no hardware or software (including BIOS) setup required afterthe memory is installed. Only purchase expansion modules from authorized retailers of this NotebookPC to ensure maximum compatibility and reliability. Visit an authorized service center or retailer forinformation on memory upgrades for your Notebook PC.Hard Disk Drive UpgradesHard disk drives have higher capacities and operate at much faster speeds than floppy disk drives and CD-ROM drives. Enhanced IDE drives provide a reliable, fast, and cost-effective mass storage solution in thePC storage industry. The high speed transfer modes supported are UltraATA/100 up to 100MB/sec andPIO mode 4 up to 16.6MB/sec. The Notebook PC comes with a removable 2.5” (6.35cm) wide and .374”(.95cm) high UltraATA/100/66 IDE hard disk drive with current capacities up to 80GB. Current IDE harddrives support S.M.A.R.T. (Self Monitoring and Reporting Technology) to detect hard disk errors orfailures before they happen. Visit an authorized service center or retailer for upgrades.IMPORTANT! Poor handling of the Notebook PC may damage the hard disk drive.Handle the Notebook PC gently and keep it away from static electricity and strongvibrations or impact. The hard disk drive is the most delicate component and willlikely be the first or only component that is damaged if the Notebook PC is dropped.Processor UpgradesSome Notebook PC models feature an upgradable processor design for faster performance in the fu-ture. Some Notebook PC models feature a ULV design for compactness and may not be upgraded. Visitan authorized service center or retailer for information on upgrades.WARNING! End-user removal of the CPU or hard disk drive will void the warranty.
584 Using the Notebook PC
59AppendixOptional AccessoriesOptional ConnectionsInternal Modem CompliancyGlossaryNotebook PC Information
60A AppendixOptional AccessoriesThese items, if desired, come as optional items to complement your Notebook PC.USB Hub (Optional)Attaching an optional USB hub will increase your USB ports and allow you to quickly connect ordisconnect many USB peripherals through a single cable.USB 2.0 Slim Combo Drive (Optional)The slim combo drive features FlextraLink™ (anti-coaster technology) and FlextraSpeed™ (recordingtechnology) to help prevent writing unusable discs, minimizes CPU loading to allow operation of othersoftware while writing, and automatically adjust for optimal recording speed versus vibration to reducerotational noise.• Interface: USB 2.0• Data buffer: 2MB (write), 512KB (read)• Disc sizes: 12cm and 8cm• DVD (read): 8X max• CD (read): 24X max• CD-R (write): 24X, 20X, 16X, 8X, 4X• CD-RW (write): 12X, 10X, 8X, 4X, 2X• Dimensions: 16mm x 129mm x 142mm• Weight: 250gSpecifications may change without notice.
61Appendix AOptional Accessories (Cont.)These items, if desired, come as optional items to complement your Notebook PC.Wireless LAN Cardbus Card or USBThe SpaceLink™ Cardbus Card is a dual band (IEEE 802.11a/b) wireless LAN adapter that fits intoa Notebook PC’s PCMCIA Type II slot with Cardbus support. The USB version is single band (IEEE802.11b) but supports any computer (Notebook or Desktop) with a USB port.Wireless LAN (Cardbus Card) Wireless LAN (USB)USB Communication CableAttaching optional USB communication cables be-tween computers through the USB ports will al-low basic file transfer capabilities between the com-puters whether they be Notebook PC’s, DesktopPC’s, or a combination of both.USB Flash Memory DiskA USB flash memory disk is an optional item thatcan replace the 1.44MB floppy disk and provide stor-age up to several hundred megabytes, higher trans-fer speeds, and greater durability. When used in cur-rent operating systems, no drivers are necessary.
62A AppendixWARNING! To prevent system failures,use (Safely Remove Hardware) on thetaskbar before disconnecting the USBfloppy disk drive. Eject the floppy diskbefore transporting the Notebook PC toprevent damage from shock.USB Keyboard and MouseAttaching an external USB keyboard will allow data entry to be more comfortable. Attaching an exter-nal USB mouse will allow Windows navigation to be more comfortable. Both the external USB key-board and mouse will work simultaneously with the Notebook PC’s built-in keyboard and touchpad.Optional Accessories (Cont.)These items, if desired, come as optional items to complement your Notebook PC.USB Floppy Disk DriveThe Notebook PC features an optional USB-interface disk drive that accepts a standard 1.44MB (or720KB) 3.5-inch floppy diskette. The eject button is on the top edge of the floppy disk drive for easyaccess, unlike desktop PCs with the eject button on the bottom of the floppy disk drive. Floppy accessactivity can be monitored through the LED on the front of the floppy disk drive.
63Appendix AMonitor Out ConnectionAttaching an optional VGA/LCD monitor is justlike that of a standard desktop PC (some configu-rations may require additional display driver set-tings. You can view the Notebook PC display panelwhile simultaneously allowing others to view theexternal monitor. For large audiences, try you canconnect a video projector to this port.Optional ConnectionsThese items, if desired, may be purchased from third-parties.External Audio ConnectionsThe Notebook PC provides easy access for connecting a stereo headphone or multichannel speakersystem, mono microphone, and a stereo audio source just like on many personal audio equipment.Multichannel speaker system
64A AppendixOptional Connections (Cont.)These items, if desired, may be purchased from third-parties.IEEE1394 Connection1394 is a high speed serial bus like SCSI but hassimple connections and hot-plugging capabilitieslike USB. Up to 63 devices such as hard disk drives,scanners, removable drives, and digital cameras/video cameras with an 1394 port can all be con-nected (more 1394 devices can be connected us-ing a 1394 hub). 1394 is also used in high-end digi-tal equipment and should be marked “DV” forDigital Video port.Securing Your Notebook PCFor system and hard disk drive security, see BIOSsetup “Security”. A third party lock such as the onesby Kensington® can be used to secure your Note-book PC physically to an unmovable object. Thecable wraps around an object and the “T” shapedend inserts into the Kensington® lock port as shownin this illustration and a key or combination dial isused to secure the lock in place.Printer ConnectionOne or more USB printers can be simultaneouslyused on any USB port or USB hub.
65Appendix ADVD-ROM Drive InformationThe Notebook PC comes with an optional DVD-ROM drive or a CD-ROM drive. In order to viewDVD titles, you must install your own DVD viewer software. Optional DVD viewer software may bepurchased with this Notebook PC. The DVD-ROM drive allows the use of both CD and DVD discs.Regional Playback InformationPlayback of DVD movie titles involves decoding MPEG2 video, digital AC3 audio and decryption of CSSprotected content. CSS (sometimes called copy guard) is the name given to the content protection schemeadopted by the motion picture industry to satisfy a need to protect against unlawful content duplication.Although the design rules imposed on CSS licensors are many, one rule that is most relevant is playbackrestrictions on regionalized content. In order to facilitate geographically staggered movie releases, DVDvideo titles are released for specific geographic regions as defined in “Region Definitions” below. Copyrightlaws require that all DVD movies be limited to a particular region (usually coded to the region at which it issold). While DVD movie content may be released for multiple regions, CSS design rules require that anysystem capable of playing CSS encrypted content must only be capable of playing one region.Region DefinitionsRegion 1Canada, US, US TerritoriesRegion 2Czech, Egypt, Finland, France, Germany, Gulf States, Hungary, Iceland, Iran, Iraq, Ireland, Italy, Ja-pan, Netherlands, Norway, Poland, Portugal, Saudi Arabia, Scotland, South Africa, Spain, Sweden,Switzerland, Syria, Turkey, UK, Greece, Former Yugoslav Republics, SlovakiaRegion 3Burma, Indonesia, South Korea, Malaysia, Philippines, Singapore, Taiwan, Thailand, VietnamRegion 4Australia, Caribbean (Except US Territories), Central America, New Zealand, Pacific Islands, SouthAmericaRegion 5CIS, India, Pakistan, Rest of Africa, Russia, North KoreaRegion 6ChinaNOTE: The region setting may be changed up to five times using the viewer software,then it can only play DVD movies for the last region setting. Changing the region codeafter that will require factory resetting which is not covered by warranty. If resetting isdesired, shipping and resetting costs will be at the expense of the user.
66A AppendixInternal Modem CompliancyThe Notebook PC with internal modem model complies with JATE (Japan), FCC (US, Canada, Korea,Taiwan), and CTR21. The internal modem has been approved in accordance with Council Decision 98/482/EC for pan-European single terminal connection to the public switched telephone network (PSTN).However due to differences between the individual PSTNs provided in different countries, the approvaldoes not, of itself, give an unconditional assurance of successful operation on every PSTN networktermination point. In the event of problems you should contact your equipment supplier in the firstinstance.OverviewOn 4th August 1998 the European Council Decision regarding the CTR 21 has been published in theOfficial Journal of the EC. The CTR 21 applies to all non voice terminal equipment with DTMF-dialling which is intended to be connected to the analogue PSTN (Public Switched Telephone Net-work).CTR 21 (Common Technical Regulation) for the attachment requirements for connection to the ana-logue public switched telephone networks of terminal equipment (excluding terminal equipment sup-porting the voice telephony justified case service) in which network addressing, if provided, is bymeans of dual tone multifrequency signalling.Network Compatibility DeclarationStatement to be made by the manufacturer to the Notified Body and the vendor: "This declaration willindicate the networks with which the equipment is designed to work and any notified networks withwhich the equipment may have inter-working difficulties"Network Compatibility DeclarationStatement to be made by the manufacturer to the user: "This declaration will indicate the networks withwhich the equipment is designed to work and any notified networks with which the equipment mayhave inter-working difficulties. The manufacturer shall also associate a statement to make it clear wherenetwork compatibility is dependent on physical and software switch settings. It will also advise the userto contact the vendor if it is desired to use the equipment on another network."Up to now the Notified Body of CETECOM issued several pan-European approvals using CTR 21. Theresults are Europe's first modems which do not require regulatory approvals in each individual Euro-pean country.Non-Voice EquipmentAnswering machines and loud-speaking telephones can be eligible as well as modems, fax machines,auto-dialers and alarm systems. Equipment in which the end-to-end quality of speech is controlled byregulations (e.g. handset telephones and in some countries also cordless telephones) is excluded.
67Appendix AThis table shows the countries currently under the CTR21 standard.Country Applied More TestingAustria1Yes NoBelgium Yes NoCzech Republic No Not ApplicableDenmark1Yes YesFinland Yes NoFrance Yes NoGermany Yes NoGreece Yes NoHungary No Not ApplicableIceland Yes NoIreland Yes NoItaly Still Pending Still PendingIsrael No NoLichtenstein Yes NoLuxemburg Yes NoThe Netherlands1Yes YesNorway Yes NoPoland No Not ApplicablePortugal No Not ApplicableSpain No Not ApplicableSweden Yes NoSwitzerland Yes NoUnited Kingdom Yes NoThis information was copied from CETECOM and is supplied without liability. For updates to thistable, you may visit http://www.cetecom.de/technologies/ctr_21.html1 National requirements will apply only if the equipment may use pulse dialling (manufacturers maystate in the user guide that the equipment is only intended to support DTMF signalling, which wouldmake any additional testing superfluous).In The Netherlands additional testing is required for series connection and caller ID facilities.
68A AppendixGlossaryACPI (Advanced Configuration and Power Management Interface)Modern standard for reducing power usage in computers.APM (Advanced Power Management)Modern standard for reducing power usage in computers.AWG (American Wire Gauge)NOTE: This table is for general reference only and should not be used as a source ofthe American Wire Gauge standard as this table may not be current or complete.Gauge Diam Area R I@3A/mm2AWG (mm) (mm2) (ohm/km) (mA)46 0.04 0.0013 13700 3.844 0.05 0.0020 8750 642 0.06 0.0028 6070 941 0.07 0.0039 4460 1240 0.08 0.0050 3420 1539 0.09 0.0064 2700 1938 0.10 0.0078 2190 2437 0.11 0.0095 1810 280.12 0.011 1520 3336 0.13 0.013 1300 4035 0.14 0.015 1120 450.15 0.018 970 5434 0.16 0.020 844 600.17 0.023 757 6833 0.18 0.026 676 750.19 0.028 605 8532 0.20 0.031 547 9330 0.25 0.049 351 14729 0.30 0.071 243 21227 0.35 0.096 178 28826 0.40 0.13 137 37825 0.45 0.16 108 477Gauge Diam Area R I@3A/mm2AWG (mm) (mm2) (ohm/km) (mA)24 0.50 0.20 87.5 5880.55 0.24 72.3 7150.60 0.28 60.7 85022 0.65 0.33 51.7 1.0 A0.70 0.39 44.6 1.16 A0.75 0.44 38.9 1.32 A20 0.80 0.50 34.1 1.51 A0.85 0.57 30.2 1.70 A19 0.90 0.64 26.9 1.91 A0.95 0.71 24.3 2.12 A18 1.00 0.78 21.9 2.36 A1.10 0.95 18.1 2.85 A1.20 1.1 15.2 3.38 A16 1.30 1.3 13.0 3.97 A1.40 1.5 11.2 4.60 A1.50 1.8 9.70 5.30 A14 1.60 2.0 8.54 6.0 A1.70 2.3 7.57 6.7 A13 1.80 2.6 6.76 7.6 A1.90 2.8 6.05 8.5 A12 2.00 3.1 5.47 9.4 A
69Appendix ABIOS (Basic Input/Output System)BIOS is a set of routines that affect how the computer transfers data between computer components,such as memory, disks, and the display adapter. The BIOS instructions are built into the computer’sread-only memory. BIOS parameters can be configured by the user through the BIOS Setup program.The BIOS can be updated using the provided utility to copy a new BIOS file into the EEPROM.Bit (Binary Digit)Represents the smallest unit of data used by the computer. A bit can have one of two values: 0 or 1.BootBoot means to start the computer operating system by loading it into system memory. When the manualinstructs you to “boot” your system (or computer), it means to turn ON your computer. “Reboot” meansto restart your computer. When using Windows 95 or later, selecting “Restart” from “Start | Shut Down...”will reboot your computer.Bus Master IDEPIO (Programmable I/O) IDE requires that the CPU be involved in IDE access and waiting for me-chanical events. Bus master IDE transfers data to/from the memory without interrupting the CPU. Busmaster IDE driver and bus master IDE hard disk drives are required to support bus master IDE mode.Byte (Binary Term)One byte is a group of eight contiguous bits. A byte is used to represent a single alphanumeric character,punctuation mark, or other symbol.Clock ThrottlingChipset function which allows the processor’s clock to be stopped and started at a known duty cycle.Clock throttling is used for power savings, thermal management, and reducing processing speed.COM PortCOM is a logical device name used by to designate the computer serial ports. Pointing devices, mo-dems, and infrared modules can be connected to COM ports. Each COM port is configured to use adifferent IRQ and address assignment.CPU (Central Processing Unit)The CPU, sometimes called “Processor,” actually functions as the “brain” of the computer. It interpretsand executes program commands and processes data stored in memory.Device DriverA device driver is a special set of instructions that allows the computer’s operating system to commu-nicate with devices such as VGA, audio, Ethernet, printer, or modem.HardwareHardware is a general term referring to the physical components of a computer system, including pe-ripherals such as printers, modems, and pointing devices.
70A AppendixDVD is essentially a bigger, faster CD that can hold video as well as audio and computer data. Withthese capacities and access rates, DVD discs can provide you with dramatically-enhanced high-color,full-motion videos, better graphics, sharper pictures, and Dolby® Digital Surround for a theater-likeexperience. DVD aims to encompass home entertainment, computers, and business information with asingle digital format, eventually replacing audio CD, videotape, laserdisc, CD-ROM, and perhaps evenvideo game cartridges. DVD has widespread support from all major electronics companies, all majorcomputer hardware companies, and most major movie and music studios.Device DriverA device driver is a special set of instructions that allows the computer’s operating system to commu-nicate with devices such as VGA, audio, Ethernet, printer, or modem.HardwareHardware is a general term referring to the physical components of a computer system, including pe-ripherals such as printers, modems, and pointing devices.IDE (Integrated Drive Electronics)IDE devices integrate the drive control circuitry directly on the drive itself, eliminating the need for aseparate adapter card (in the case for SCSI devices). UltraDMA/66 or 100 IDE devices can achieve upto 33MB/Sec transfer.IEEE1394Also known as iLINK (Sony) or FireWire (Apple). IEEE1394 is a high speed serial bus like SCSI buthas simple connections and hot-plugging capabilities like USB. The interface IEEE1394 has a band-width of 400-1000 Mbits/sec and can handle up to 63 units on the same bus. It is very likely thatIEEE1394, together with USB, will replace Parallel, IDE, SCSI, and EIDE ports. IEEE1394 is alsoused in high-end digital equipment and should be marked “DV” for Digital Video port.Infrared Port (IrDA)The infrared (IrDA) communication port allows convenient wireless data communication with infra-red-equipped devices or computers. This allows easy wireless synchronization with PDAs or mobilephones and even wireless printing to printers. If your office supports IrDA networking, you can havewireless connection to a network anywhere provided there is a direct line of sight to an IrDA node.Small offices can use IrDA technology to share a printer between several closely placed Notebook PCsand even send files to each other without a network.Kensington® LocksKensington® locks (or compatible) allow the Notebook PC to be secured usually using a metal cableand lock that prevent the Notebook PC to be removed from a fixed object. Some security products mayalso include a motion detector to sound an alarm when moved.
71Appendix ALaser ClassificationsAs lasers became more numerous and more widely used, the need to warn users of laser hazards be-came apparent. To meet this need, laser classifications were established. Current classification levelsvary from optically safe, requiring no controls (Class 1) to very hazardous, requiring strict controls(Class 4).CLASS 1: A Class 1 laser or laser system emits levels of optical energy that are eye-safe and conse-quently require no controls. An example of this class of laser system is the checkout scanning devicefound in most grocery stores or lasers used in optical drives.CLASS 2 AND CLASS 3A: Class 2 and Class 3A lasers emit visible, continuous-wave (CW) opticalradiation levels slightly above the maximum permissible exposure (MPE) level. Although these la-sers can cause eye damage, their brightness usually causes observers to look away or blink beforeeye damage occurs. These lasers have strict administrative controls requiring placement of signswarning personnel not to stare directly into the beam. Class 3A lasers must not be viewed withoptically-aided devices.CLASS 3B: Class 3B lasers, and Class 3A lasers with outputs of 2.5mW, are hazardous to personnelwho are within the beam path and look at the beam source directly or by specular reflection. Theselasers cannot produce hazardous diffuse reflections. Personnel working with these lasers should wearappropriate protective eyewear during any operation of the laser. Class 3B lasers have both adminis-trative and physical controls to protect personnel. Physical controls include limited access workareas. Administrative controls include special warning signs posted outside the entrances to the laserwork spaces and lights outside the entrances that warn personnel when the lasers are in use.CLASS 4: Class 4 lasers are high-power lasers that will cause damage to unprotected eyes and skinthrough intra-beam viewing and specular or diffuse reflections. Consequently, no personnel shouldbe in aroom where a Class 4 laser is operating without proper eye protection.LPT Port (Line Printer Port)Logical device name reserved by DOS for the computer parallel ports. Each LPT port is configured touse a different IRQ and address assignment.PCI Bus (Peripheral Component Interconnect Local Bus)PCI bus is a specification that defines a 32-bit data bus interface. PCI is a standard widely used byexpansion card manufacturers.PC Cards (PCMCIA)PC cards are about the size of a few stacked credit cards and have a 68-pin connector at one end. The PCCard standard accommodates a number of function, communication, and data storage expansion op-tions. PC cards come in memory/flash cards, fax/modems, networking adapters, SCSI adapters, MPEGI/II decoder cards, and even wireless modem or LAN cards. The Notebook PC supports PCMCIA 2.1,and 32-bit CardBus standards. The three different PC Card standards actually have different thick-nesses. Type I cards are 3.3mm, Type II cards are 5mm, and Type III cards are 10.5mm thick. Type I andType II cards can be used in a single socket. Type III cards take up two sockets and must be used onNotebook PCs with two sockets.
72A AppendixPOST (Power On Self Test)When you turn on the computer, it will first run through the POST, a series of software-controlleddiagnostic tests. The POST checks system memory, the motherboard circuitry, the display, the key-board, the diskette drive, and other I/O devices.PS/2 PortPS/2 ports are based on IBM Micro Channel Architecture. This type of architecture transfers data througha 16-bit or 32-bit bus. A PS/2 mouse and/or keyboard may be used on ATX motherboards.RAM (Random Access Memory)There are several different types of RAM such as DDR (Double Dynamic RAM), DRAM (DynamicRAM), EDO DRAM (Extended Data Output DRAM), SDRAM (Synchronous DRAM).ROM (Read Only Memory)ROM is nonvolatile memory used to store permanent programs (called firmware) used in certain com-puter components. Flash ROM (or EEPROM) can be reprogrammed with new programs (or BIOS).Suspend ModeIn Save-to-RAM (STR) and Save-to-Disk (STD), the CPU clock is stopped and most of the NotebookPC devices are put in their lowest active state. The Notebook PC enters Suspend when the systemremains idle for a specified amount of time or manually using the function keys. The timeout setting ofboth Hard Disk and Video can be set by the BIOS Setup. The Power LED blinks when the Notebook PCis in STR mode. In STD mode, the Notebook PC will appear to be powered OFF.System DiskA system disk contains the core file of an operating system and is used to boot up the operating system.Twisted-Pair CableThe cable used to connect the Ethernet card to a host (generally a Hub or Switch) is called a straight-through Twisted Pair Ethernet (TPE). The end connectors are called RJ-45 connectors, which are notcompatible with RJ-11 telephone connectors. If connecting two computers together without a hub inbetween, a crossover twisted-pair is required.UltraDMA/66 or 100UltraDMA/66 or 100 are new specifications to improve IDE transfer rates. Unlike traditional PIOmode, which only uses the rising edge of IDE command signal to transfer data, UltraDMA/66 or 100uses both rising edge and falling edge.USB (Universal Serial Bus)A new 4-pin serial peripheral bus that allows plug and play computer peripherals such as keyboard,mouse, joystick, scanner, printer and modem/ISDN to be automatically configured when they are at-tached physically without having to install drivers or reboot. With USB, the traditional complex cablesfrom back panel of your PC can be eliminated.
73Appendix A
74A AppendixNotebook PC InformationThis page is provided for recording information concerning your Notebook PC for future reference orfor technical support. Keep this User’s Manual in a secured location if passwords are filled out.Owner’s Name:__________________________ Owner’s Telephone: ________________Manufacturer: ______________________________________ Model: ________________Retailer: ______________________________________ Telephone: ________________Display Size:_________ Purchase Date: _________ Serial Number: ________________Hard Disk Drive Manufacturer: ______________________Capacity: ________________2nd Hard Disk Drive Manufacturer: ___________________Capacity: ________________BIOS Version: _______________________________________ Date: ________________Accessories: _______________________________ Serial Number: ________________Accessories: _______________________________ Serial Number: ________________SoftwareOperating System: ________________________________ Version: ________________Software: __________________________________ Serial Number: ________________Software: __________________________________ Serial Number: ________________SecuritySupervisor Password: _______________________ User Password: ________________NetworkUser’s Name: ____________Password: ______________ Domain: ________________User’s Name: ____________Password: ______________ Domain: ________________
Contact InformationASUSTeK COMPUTER INC. (Asia-Pacific)Company Address: 150 Li-Te Road, Peitou, Taipei, Taiwan 112General Telephone:+886-2-2894-3447 Web Site Address: www.asus.com.twGeneral Fax: +886-2-2894-7798 General Email: info@asus.com.twTechnical SupportMB/Others (Tel): +886-2-2890-7121 (English) Notebook (Tel): +886-2-2894-3447Desktop/Server (Tel): +886-2-2890-7123 (English) Support Fax: +886-2-2890-7698ASUS COMPUTER INTERNATIONAL (America)Company Address: 44370 Nobel Drive, Fremont, CA 94538, USAGeneral Email: tsd@asus.com Web Site Address: usa.asus.comGeneral Fax: +1-510-608-4555Technical SupportSupport Email: notebooktsd@asus.com Support Fax: +1-502-933-8713General Support: +1-502-995-0883 Notebook (Tel): +1-510-739-3777 x5110ASUS COMPUTER GmbH (Germany & Austria)Company Address: Harkort Str. 25, D-40880 Ratingen, GermanyWeb Site Address: www.asuscom.de General Telephone: +49-2102-95990Online Contact: www.asuscom.de/sales General Fax: +49-2102-959911Technical SupportOnline Support: www.asuscom.de/support Support Fax: +49-2102-959911Component Support: +49-2102-95990 Notebook Support: +49-2102-959910ASUS COMPUTER (Middle East and North Africa)Company Address: P.O. Box 64133, Dubai, U.A.E. General Telephone: +9714-283-1774Web Site Address: www.ASUSarabia.com General Fax: +9714-283-1775

Navigation menu