ASUSTeK Computer X008DC ASUS Phone User Manual

ASUSTeK Computer Inc ASUS Phone

Contents

User Manual

User Guide
E12086
15060-xxxxxxxx
Revised Edition V3 / September 2016
Model: ASUS_X008D/ASUS_X008DA/ASUS_X008DB/
ASUS_X008DC
Before you start, ensure that you have read all the
safety information and operating instructions in this
User Guide to prevent injury or damage to your
device.
NOTE:
For the latest updates and more detailed
information, please visit
www.asus.com
.
Front features
Proximity sensor
Receiver
Front
camera
LED indicator
Touch screen
display
Side features
Audio jack
Nano SIM /
micro SIM
card slot
Eject
hole
Volume
key
Power
key
Microphone
Micro USB port
Rear features
Flash
Rear camera
Fingerprint
sensor
NOTES:
•
The Nano SIM / micro SIM card slots support
GSM, WCDMA, FDD-LTE, and TDD-LTE
network bands.
•
The microSD card slot supports microSD and
microSDXC card formats.
Charging your ASUS Phone
To charge your ASUS Phone:
1.
Connect the USB connector into the power
adapter’s USB port.
2.
Connect the other end of the USB cable to your
ASUS Phone.
3.
Plug the power adapter into a wall socket.
IMPORTANT!
•
When using your ASUS Phone while it is plugged to
a power outlet, the grounded power outlet must be
near to the unit and easily accessible.
•
When charging your ASUS Phone through your
computer, ensure that you plug the USB cable to
your computer’s USB port.
•
Avoid charging your ASUS Phone in an
environment with ambient temperature of above
35oC (95oF).
NOTES:
•
Use only the power adapter that came with your
device. Using a different power adapter may
damage your device.
•
Using the bundled power adapter and ASUS Phone
signal cable to connect your ASUS Phone to a
power outlet is the best way to charge your ASUS
Phone.
•
Use the ASUS 18W/10W power adapter and ASUS
USB cable to get the best charge experience when
your ASUS Phone is in sleep mode.
•
The input voltage range between the wall outlet and
this adapter is AC 100V - 240V. The output voltage
of the USB cable is +9V 2A, 18W / +5V 2A, 10W.
3
2
1
Installing a Nano SIM/ micro SIM /
microSD card
To install a Nano SIM/ micro SIM/ microSD card:
1. Push the bundled
eject pin into the hole
on the card slot to
eject the tray out.
2. Insert the Nano SIM, micro SIM, or microSD
card into the appropriate slot.
Micro-SIM1
Micro
SD
3. Push the tray to
close it.
IMPORTANT!
Both SIM card slots support 4G / 3G / 2G
network band. But only one SIM card can connect to 4G
service at a time.
CAUTION!
•
Do not use sharp tools or solvent on your device to
avoid scratches on it.
•
Use only a standard Micro SIM or Nano SIM card
on your ASUS Phone.
• For more regulatory information and E-labels,
check on your device from Settings >About >
Regulatory Information.
Federal Communications
Commission Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user‘s authority to operate the equipment.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to radio
or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment
and receiver.
-
Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
-
Consult the dealer or an experienced radio/TV
technician for help.
The antenna(s) used for this transmitter must not be
co-located or operated in conjunction with any other
antenna or transmitter.
The country code selection is for non-US models
only and is not available to all US models. Per FCC
regulation, all WiFi products that are marketed in US
must be fixed to US-operated channels only.
RF Exposure Information (SAR)
This device has been tested and meets applicable
limits for Radio Frequency (RF) exposure.
Specific Absorption Rate (SAR) refers to the rate at
which the body absorbs RF energy. SAR limits are
1.6 Watts per kilogram (over a volume containing a
mass of 1 gram of tissue) in countries that follow the
United States FCC limit and 2.0 W/kg (averaged
over 10 grams of tissue) in countries that follow the
Council of the European Union limit. Tests for SAR
are conducted using standard operating positions
with the device transmitting at its highest certified
power level in all tested frequency bands.
To reduce exposure to RF energy, use a hands-free
accessory or other similar option to keep this device
away from your head and body. Carry this device at
least 10 mm away from your body to ensure
exposure levels remain at or below the as-tested
levels. Choose the belt clips, holsters, or other
similar body-worn accessories which do not contain
metallic components to support operation in this
manner. Cases with metal parts may change the RF
performance of the device, including its compliance
with RF exposure guidelines, in a manner that has
not been tested or certified, and use such
accessories should be avoided.
Canada, Industry Canada (IC)
Notices
This device complies with Industry Canada’s
licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1)
This device may not cause interference; and
(2)
This device must accept any interference,
including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR
d’Industrie Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux
deux conditions suivantes:
(1)
l’appareil ne doit pas produire de brouillage, et
(2)
l’utilisateur de l’appareil doit accepter tout
brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le
fonctionnement.
Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is
below the Industry Canada (IC) radio frequency
exposure limits. The Wireless Device should be
used in such a manner such that the potential
for human contact during normal operation is
minimized. This device has been evaluated for and
shown compliant with the IC Specific Absorption
Rate (“SAR”) limits when installed in specific host
products operated in portable exposure conditions.
Canada’s REL (Radio Equipment List) can be found
at the following web address: http://www.ic.gc.ca/
app/sitt/reltel/srch/nwRdSrch.do?lang=eng
Additional Canadian information on RF exposure
also can be found at the following web address:
http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.
html
Informations concernant l’exposition aux
fréquences radio (RF)
La puissance de sortie émise par cet appareil
sans fil est inférieure à la limite d’exposition aux
fréquences radio d’Industrie Canada (IC). Utilisez
l’appareil sans fil de façon à minimiser les contacts
humains lors du fonctionnement normal.
Ce périphérique a été évalué et démontré conforme
aux limites SAR (Specific Absorption Rate – Taux
d’absorption spécifique) d’IC lorsqu’il est installé
dans des produits hôtes particuliers qui fonctionnent
dans des conditions d’exposition à des appareils
portables.
Ce périphérique est homologué pour l’utilisation au
Canada. Pour consulter l’entrée correspondant à
l’appareil dans la liste d’équipement radio (REL
- Radio Equipment List) d’Industrie Canada rendez-
vous sur:
http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.
do?lang=eng
Pour des informations supplémentaires concernant
l’exposition aux RF au Canada rendez-vous sur:
http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.
html
Avertissement
Le guide d’utilisation des dispositifs pour réseaux
locaux doit inclure des instructions précises sur les
restrictions susmentionnées, notamment:
CAN ICES-3(B)/NMB-3(B)
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est conforme
à la norme NMB-003 du Canada.
This device and its antenna(s) must not be co-
located or operated in conjunction with any other
antenna or transmitter, except tested built-in radios.
The County Code Selection feature is disabled for
products that are marketed in the US/ Canada.
Cet appareil et son antenne ne doivent pas être
situés ou fonctionner en conjonction avec une autre
antenne ou un autre émetteur, exception faites des
radios intégrées qui ont été testées.
La fonction de sélection de l’indicatif du pays est
désactivée pour les produits commercialisés aux
États-Unis et au Canada.
The IC ID for this device is 3568A-X008DC.
L’identifiant Industrie Canada de cet appareil est:
3568A-X008DC.
CE RF Exposure Compliance
This device meets the EU requirements (1999/519/
EC) on the limitation of exposure of the general
public to electromagnetic fields by way of health
protection.
For body-worn operation, this device has been
tested and meets the ICNIRP guidelines and the
European Standard EN 62209-2, for use with
dedicated accessories. SAR is measured with
this device at a separation of 0.5 cm to the body,
while transmitting at the highest certified output
power level in all frequency bands of this device.
Use of other accessories which contain metals
may not ensure compliance with ICNIRP exposure
guidelines.
CE Mark Warning
CE marking for devices with wireless
LAN/ Bluetooth
This equipment complies with the requirements of
Directive 1999/5/EC of the European Parliament
and Commission from 9 March, 1999 governing
Radio and Telecommunications Equipment and
mutual recognition of conformity.The highest CE
SAR values for the device are as follows:
• 0.590 W/Kg (Head)
• 0.859 W/Kg (Body)
Using GPS (Global Positioning
System) on your ASUS Phone
To use the GPS positioning feature on your ASUS
Phone:
•
Ensure that your device is connected to the
Internet before using Google Map or any
GPS-enabled apps.
•
For first-time use of a GPS-enabled app on
your device, ensure that you are outdoors to
get the best positioning data.
•
When using a GPS-enabled app on
your device inside a vehicle, the metallic
component of the car window and other
electronic devices might affect the GPS
performance.
Prevention of Hearing Loss
To prevent possible hearing damage, do not listen at
high volume levels for long periods.
Safety information
ASUS Phone care
•
Use your ASUS Phone in an environment with
ambient temperatures between 0 °C (32 °F)
and 35 °C (95 °F).
The battery
Your ASUS Phone is equipped with a high
performance non-detachable Li-polymer battery.
Observe the maintenance guidelines for a longer
battery life.
•
Do not remove the non-detachable li-polymer
battery as this will void the warranty.
•
Avoid charging in extremely high or low
temperature. The battery performs optimally in
an ambient temperature of +5 °C to +35 °C.
•
Do not remove and replace the battery with a
non-approved battery.
•
Use only ASUS battery. Using a different
battery may cause physical harm/injury and
may damage your device.
•
Do not remove and soak the battery in water or
any other liquid.
•
Never try to open the battery as it contains
substances that might be harmful if swallowed
or allowed to come into contact with
unprotected skin.
•
Do not remove and short-circuit the battery, as
it may overheat and cause a fire. Keep it away
from jewelry or metal objects.
•
Do not remove and dispose of the battery
in fire. It could explode and release harmful
substances into the environment.
•
Do not remove and dispose of the battery with
your regular household waste. Take it to a
hazardous material collection point.
•
Do not touch the battery terminals.
•
To avoid fire or burns, do not disassemble,
bend, crush, or puncture the battery.
NOTES:
•
Risk of explosion if battery is replaced by an
incorrect type.
•
Dispose of used battery according to the
instructions.
The charger
•
Use only the charger supplied with your ASUS
Phone.
•
Never pull the charger cord to disconnect it
from the power socket. Pull the charger itself.
Caution
Your ASUS Phone is a high quality piece of
equipment. Before operating, read all instructions
and cautionary markings on the (1) AC Adapter.
•
Do not use the ASUS Phone in an extreme
environment where high temperature or high
humidity exists. The ASUS Phone performs
optimally in an ambient temperature between 0
°C (32°F) and 35 °C (95 °F).
•
Do not disassemble the ASUS Phone or its
accessories. If service or repair is required,
return the unit to an authorized service center.
If the unit is disassembled, a risk of electric
shock or fire may result.
•
Do not short-circuit the battery terminals with
metal items.
Operator access with a tool
If a TOOL is necessary to gain access to an
OPERATOR ACCESS AREA, either all other
compartments within that area containing a hazard
shall be inaccessible to the OPERATOR by the use
of the same TOOL, or such compartments shall be
marked to discourage OPERATOR access.
ASUS Recycling/Takeback
Services
ASUS recycling and takeback programs come
from our commitment to the highest standards for
protecting our environment. We believe in providing
solutions for you to be able to responsibly recycle
our products, batteries, other components as well
as the packaging materials. Please go to http://
csr.asus.com/english/Takeback.htm for detailed
recycling information in different regions.
Regional notice for Singapore
This ASUS Phone
complies with IDA
Standards.
Proper disposal
WARNING!
This product may contain chemicals
known to the State of California to cause cancer,
birth defects, or other reproductive harm. Wash
hands after handling.
Risk
of
explosion
if
battery
is
replaced
by
an
incorrect
type.
Dispose
of
used
batteries
according
to
the
instructions.
DO
NOT
throw
the
battery
in
municipal
waste.
The
symbol
of
the
crossed
out
wheeled
bin
indicates
that
the
battery
should
not
be
placed
in
municipal
waste.
DO
NOT
throw
this
product
in
municipal
waste.
This
product
has
been
designed
to
enable
proper
reuse
of
parts
and
recycling.
The
symbol
of
the
crossed
out
wheeled
bin
indicates
that
the
product
(electrical,
electronic
equipment
and
mercury-containing
button
cell
battery)
should
not
be
placed
in
municipal
waste.
Check
local
regulations
for
disposal
of
electronic
products.
DO
NOT
throw
this
product
in
fire.
DO
NOT
short
circuit
the
contacts.
DO
NOT
disassemble
this
product.
EN 60950-1: 2006 / A12: 2011
EN 60950-1: 2006 / A2: 2013 EN 60065:20 02 / A1 2: 2011
Regulat ion ( EC) No. 1275/ 2 00 8
Regulat ion ( EC) No. 642/ 20 09 Regulat ion ( EC) No. 278/ 20 09
Regulat ion (EU) No. 617/2013
LV D – Di re cti v e 2006/ 95/ E C (until Ap ril 19th, 2016) and Directi v e 2014/35/E U ( from Ap ril 20th, 2016)
Ecod e sign – Dir ective 2009/ 125/EC
Ro HS – Di rective 2011/65/EU
CE
marking
Equipment Class 1
Ver. 160217
(EU conformi t y m ar king)
Taipei, Taiwan
EN 60950-1: 2006 / A12: 2011
EN 60950-1: 2006 / A2: 2013
EN 60065: 20 02 / A1 2: 2011
Veror dnung (EG) No. 127 5/2008
Veror dnung (EG) No. 642/ 2009 V eror dnung (EG) No. 2 78/2009
Veror dnung (EU) No. 61 7/ 20 13
LV D – Richtlinie 2006/9 5/E G (bi s 1 9. Ap ril 2016) und Ri chtlinie 201 4/ 35/ EU ( ab 20. April 201 6)
Ökod esign – Richtlini e 2009/ 1 25/ EG
Ro HS – Richtlinie 2011 /65/EU
CE
Kennzeiche n
Geräteklasse 1
Ver. 160217
Taip ei, T aiwan
EU Declaration of Conformity
W e, th e undersigned,
Manu f a ctur e r:
ASUST eK COMPUTER I NC.
Add re ss:
4F, No. 15 0, LI-TE R d. , PEITO U, TAI PEI 11 2, TAIW AN
Authorized rep r es ent ati v e in Eu rop e:
ASUS CO MP UT E R Gmb H
Add ress, City:
HA RKO RT ST R. 21-2 3, 40880 RA TI NG E N
Country:
GERMA NY
declare the fo llo win g a pp ar atu s:
Product name :
ASU S Phone
Model name : A SUS _X008D; ASUS_ X 008D A
The object of th e de cl arat ion des crib ed above is in conformity with th e rel evan t Union harmonisation legislation:
EMC – Di rective 2004/ 108/ EC (u ntil Ap ri l 19th, 2016) and Directi ve 2014/30/EU (f ro m A p ri l 2 0t h, 2016)
EN 55 022:20 10+A C:20 11
EN 6 10 00- 3-2: 2 01 4
EN 550132001 A12003 A2 2006
EN 55024:2010
EN 6 10 00- 3-3: 2 01 3
EN 550202007 A112011
R&TTE – Directi ve 1999/5/EC
EN 300 3 28 V 1 9 1(2 0 15 0 2)
EN 301 48 9 1 V 1 9 2( 20 1 1 0 9)
EN 300 44 0- 1 V1. 6. 1( 20 1 0-0 8)
EN 301 48 9- 3 V1. 6. 1( 20 1 3-1 2)
EN 300 44 0- 2 V1. 4. 1( 20 1 0-0 8)
EN 301 48 9- 4 V2. 1. 1( 20 1 3-1 2)
EN 301 5 11 V 9. 0. 2( 2 0 03 -0 3)
EN 301 48 9- 7 V1. 3. 1( 20 0 5-1 1)
EN 301 90 8- 1 V7. 1. 1( 20 1 5-0 3)
EN 301 48 9- 9 V1. 4. 1( 20 0 7-1 1)
EN 301 90 8- 2 V6. 2. 1( 20 1 3-1 0)
EN 301 48 9-17 V 2. 2. 1 (2 0 12-0 9)
EN 301 90 8-13 V 6. 2. 1 (2 0 14-0 2)
EN 301 48 9-24 V 1. 5. 1 (2 0 10-0 9)
EN 301 8 93 V 1. 7. 1( 2 0 12 -0 6)
EN 301 35 7- 2 V1. 4. 1( 20 0 8-1 1)
EN 300 33 0- 2 V1. 5. 1( 20 1 0-0 2)
EN 302 29 1- 2 V1. 1. 1( 20 0 5-0 7)
EN 5 03 60: 2 00 1/ A1: 2 01 2
EN 302 6 23 V 1. 1. 1( 2 0 09 -0 1)
EN 62479:2010
EN 50 566:20 13/A C:20 14
EN 62311:2008
EN 50385:2002
Sig nat ur e
Pl ac e of issu e
Jerry Shen
Pri nt e d Name
15/07/2016
Date of iss ue
CEO
Posi ti on
2016
Year CE mar ki ng was firs t affi xe d
Hier mit er klären wir,
EU Konformitätserklärung
Herst ell er:
ASUSTeK COMPUTER IN C.
Ansch ri ft:
4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN
Bevollmächtigter:
ASUS COMPUTE R GmbH
Ansch rif t des Bevollmächtigten:
HARKO RT S TR. 21-23, 408 80 RAT INGEN
Land:
GERMANY
das s n achst eh end bez eic hnet e Produkte
Pro du kt b ezei ch n un g ASUS Phone
Modellbezei chnung:
ASU S_X 008D ; A SUS _X0 08D A
mit den nachstehend angegeben en, für das Produkt geltenden Richtlinien/Bestimmungen über einstimmen:
EMV – Richtlinie 2004/108/ EG (bis 19. April 2016) und Richtlinie 2014/3 0/EU (ab 20. April 2016)
EN 550 22: 2 01 0+ AC: 2 01 1
EN 61 000-3-2: 2 01 4
EN 550 13: 2 00 1+ A1: 2 00 3+ A2: 2 00 6
EN 550 24: 2 01 0
EN 61 000-3-3: 2 01 3
EN 550 20: 2 00 7+ A11: 20 11
R&TT E – Richtlinie 1999/5/EG
EN 30 0 328 V 1 9 1( 2015 02)
EN 30 1 489 1 V1 9 2( 2011 09)
EN 30 0 440-1 V1. 6.1( 2010-08)
EN 30 1 489-3 V1. 6.1( 2013-12)
EN 30 0 440-2 V1. 4.1( 2010-08)
EN 30 1 489-4 V2. 1.1( 2013-12)
EN 30 1 511 V 9. 0.2( 20 03-03)
EN 30 1 489-7 V1. 3.1( 2005-11)
EN 30 1 908-1 V7. 1.1( 2015-03)
EN 30 1 489-9 V1. 4.1( 2007-11)
EN 30 1 908-2 V6. 2.1( 2013-10)
EN 30 1 489-17 V 2. 2.1( 20 12-09)
EN 30 1 908-13 V 6. 2.1( 20 14-02)
EN 30 1 489-24 V 1. 5.1( 20 10-09)
EN 30 1 893 V 1. 7.1( 20 12-06)
EN 30 1 357-2 V1. 4.1( 2008-11)
EN 30 0 330-2 V1. 5.1( 2010-02)
EN 30 2 291-2 V1. 1.1( 2005-07)
EN 50 360:20 01/A 1:20 12
EN 30 2 623 V 1. 1.1( 20 09-01)
EN 624 79: 2 01 0
EN 505 66: 2 01 3/ AC: 2 01 4
EN 623 11: 2 00 8
EN 503 85: 2 00 2
Unter schr ift
Ort
Jerry S hen
Na me
15/07/2016
Dat u m
CEO
Posi ti on
2016
Jahr d er Kennzeichenvergabe
EN 60950-1: 2006 / A12: 2011
EN 60950-1: 2006 / A2: 2013
EN 60065:20 02 / A1 2: 2011
Regulat ion (EC) No. 1275/200 8
Regulat ion (EC) No. 642/2009 Regulat ion (EC) No. 278/2009
Regulat ion (EU) No. 617/2013
LVD D ire cti va 2006/95/CE (ha st a el 1 9 d e ab ril, 2016) y Dire cti va 2014/35/UE (de sd e el 20 d e abril, 2016)
Di señ o Ecológi co – Directiva 2009/12 5/ C E
Ro HS – Di rectiva 2011/65/ UE
Ma
rcado CE Cl ase
de equipo 1
Ver. 160217
(marcado CE de con formidad)
Taipei, Taiwan
EN 609 50 -1: 2 006 / A12: 201 1
EN 609 50 -1: 2 006 / A2: 2013
Regulation ( CE) No. 127 5/ 200 8
Regulation ( CE) No. 642/ 2009
Regulation ( CE) No. 278/ 2009
Regulation ( UE) No. 6 17/2013
Di recti ve LVD 2006// 125/CE (ju sq u ’ au 19 avril 2016) et la dire ctiv e 2014/3 4/UE (à parti r du 20 avril 2016)
EN 600 65: 2002 / A1 2: 2011
Di rect i ve é co con cep ti on 2 009/125/CE
Di rective RoHS 2011/ 65/UE
Ma
rqu age C E
Equipement de classe 1
Ver. 160217
(Marquage UE de confor mit é)
Taipei, Taiwan
UE Declaración de Conformidad
Nosotros, lo s abaj o f ir man t es,
Fab ri can te:
ASUST eK COM P UTE R IN C.
Dirección:
4F, No. 15 0, LI-TE R d. , PEITO U, TAI PEI 11 2, TAIW AN
Rep r esen t ant e aut o riz ad o en Europa:
ASUS CO MP UT E R Gmb H
Dirección, Ciud ad:
HA RKO RT ST R. 21-2 3, 40880 RA TI NG E N
País :
GERMA NY
De cl ar am o s el siguiente producto:
No mb re d el ap ar ato :
ASU S Phon e
No mb re d el mo d elo :
ASU S_X 008D; ASU S_X0 08D A
El objet o de la declaració n des crita ante rior m ente es co nfor m e co n la legislación de arm onizació n p er tine nte de la Unión:
EMC Directiva 2004/108/CE (hasta el 19 de a bril, 2016) y Directi va 2014/30/UE (desde el 20 de a bril, 2016)
EN 55 022:20 10+A C:20 11
EN 61 00 0-3- 2: 2 01 4
EN 5 501 3: 2 00 1+ A1: 2 00 3+A 2:20 06
EN 55024:2010
EN 61 00 0-3- 3: 2 01 3
EN 55 020: 20 07+ A 1 1:2 01 1
R&TTE – Directi va 1999/5/CE
EN 300 32 8 V 1 9 1( 20 1 5 02)
EN 301 48 9 1 V 1 9 2( 20 1 1 0 9)
EN 300 44 0- 1 V1. 6. 1( 20 1 0-0 8)
EN 301 48 9- 3 V1. 6. 1( 20 1 3-1 2)
EN 300 44 0- 2 V1. 4. 1( 20 1 0-0 8)
EN 301 48 9- 4 V2. 1. 1( 20 1 3-1 2)
EN 301 51 1 V 9. 0. 2( 20 0 3-03)
EN 301 48 9- 7 V1. 3. 1( 20 0 5-1 1)
EN 301 90 8- 1 V7. 1. 1( 20 1 5-0 3)
EN 301 48 9- 9 V1. 4. 1( 20 0 7-1 1)
EN 301 90 8- 2 V6. 2. 1( 20 1 3-1 0)
EN 301 48 9-17 V 2. 2. 1 (2 0 12-0 9)
EN 301 90 8-13 V 6. 2. 1 (2 0 14-0 2)
EN 301 48 9-24 V 1. 5. 1 (2 0 10-0 9)
EN 301 89 3 V 1. 7. 1( 20 1 2-06)
EN 301 35 7- 2 V1. 4. 1( 20 0 8-1 1)
EN 300 33 0- 2 V1. 5. 1( 20 1 0-0 2)
EN 302 29 1- 2 V1. 1. 1( 20 0 5-0 7)
EN 5 03 60: 2 00 1/ A1: 2 01 2
EN 302 62 3 V 1. 1. 1( 20 0 9-01)
EN 62479:2010
EN 50 566:20 13/A C:20 14
EN 62311:2008
EN 50385:2002
Fi r ma
Lugar de emi sión
Jerry Shen
No mbr e i mpr e so
15/07/2016
Fecha de emisión
CEO
Posi ci ón
2016
Año en que se col o có
el marcado CE por primera vez
DECLARATION UE DE CONFORMITE
No u s, soussignés
Fab ri can t:
ASUST eK COM P UTE R IN C.
Adresse:
4F, No. 15 0, LI-TE R d. , PEITO U, TAI PEI 11 2, TAIW AN
Rep r ésen t ant aut ori sé en Eu rop e:
ASUS CO MP UT E R Gmb H
Adresse, ville:
HA RKO RT ST R. 21-2 3, 40880 RA TI NG E N
Pays:
GERMA NY
Déclarons l’ap p ar ei l sui v ant:
No m du p roduit :
ASU S Phon e
Nom du modèle :
ASU S_X 008D; ASU S_X0 08D A
L’objet de la déclaration dé crit ci-d es su s est co nfo rm e avec la législation d’harmonisation de l’ Union applicable
Directive CEM 2004/108/CE (ju squ’ au 19 avril 2016) et la directive 2014/ 30/UE (à p artir du 20 avril 2016)
EN 55 022:20 10+A C:20 11
EN
610 00- 3-2: 2 01 4
EN 5 501 3: 2 00 1+ A1: 2 00 3+A 2:20 06
EN 55024:2010
EN
610 00- 3-3: 2 01 3
EN 55 020: 20 07+ A 1 1:2 01 1
Directive R&TTE 1999/5/CE
EN 300 440-1 V1. 6.1( 2 01 0-08 )
EN 301 489-3 V1. 6.1( 2 01 3-12 )
EN 300 440-2 V1. 4.1( 2 01 0-08 )
EN 301 489-4 V2. 1.1( 2 01 3-12 )
EN 301 51 1 V 9. 0. 2( 20 0 3-03)
EN 301 489-7 V1. 3.1( 2 00 5-11 )
EN 301 90 8- 1 V7. 1. 1( 20 1 5-0 3)
EN 301 489-9 V1. 4.1( 2 00 7-11 )
EN 301 908-2 V6. 2.1( 2 01 3-10 )
EN 301 489-17 V 2. 2. 1( 20 1 2-0 9)
EN 301 908-13 V 6. 2. 1( 20 1 4-0 2)
EN 301 489-24 V 1. 5. 1( 20 1 0-0 9)
EN 301 89 3 V 1. 7. 1( 20 1 2-06)
EN 301 357-2 V1. 4.1( 2 00 8-11 )
EN 300 330-2 V1. 5.1( 2 01 0-02 )
EN 302 291-2 V1. 1.1( 2 00 5-07 )
EN 5 03 60: 2 00 1/ A1: 2 01 2
EN 302 62 3 V 1. 1. 1( 20 0 9-01)
EN 62479:2010
EN 50 566:20 13/A C:20 14
EN 62311:2008
EN 50385:2002
Sig na t ur e
Jerry Shen
Nom en c ar ac t èr es d’imprimerie
CEO
P ositi o n
Li eu d e dél i vr a nc e
15/07/2016
Da te d'E mission
2016
Année où commence l’appositi on
du m arq uag e CE
EN 60950-1: 2006 / A12: 2011
EN 60950-1: 2006 / A2: 2013 EN 60065:20 02 / A1 2: 2011
Regulat ion (EC) No. 1275/200 8
Regulat ion ( EC) No. 642/ 20 09
Regulat ion ( EC) No. 278/ 20 09
Regulat ion (EU) No. 617/2013
LVD D ireti va 2 006/ 9 5/CE (at é 19 d e ab ril d e 2016) and Diretiva 2014/35/UE ( a p arti r d e 20 d e ab ril d e 20 16 )
Eco Ecod esign – Diretiva 2009/125/ C E
Ro HS – Di reti va 2 011/ 65/UE
Ma
rcação CE
Cl ass e de equip amento 1
Ver. 160217
(Marcaç ão CE d e co nfor midad e)
Taipei, Taiwan
EN 60950-1: 2006 / A12: 2011
EN 60950-1: 2006 / A2: 2013
EN 60065: 20 02 / A1 2: 2011
Regul at ion (EC) No. 1275/ 2008
Regul at ion (EC) No. 642/2009
Regul at ion (EC) No. 278/2009
Regul at ion (EU) No. 61 7/ 20 13
LV D – Dir ect iv a 2 006/ 95/ CE ( p ân ă în 19 Ap rili e 2 01 6) şi Di rect iv a 2 01 4/ 35 / UE ( p ână în 20 Ap ril ie 2 0 16)
Ecod esign – Dir ectiva 2009/125/ CE
rcajul CE
Ver. 160217
(Marc aj de conformi tate UE )
Taip ei, T aiwan
Declaração CE de Conformidade
Nó s, os abaixo-ass in ad o s,
Fab ri can te:
ASUST eK COMPUTER I NC.
Endereço:
4F, No. 15 0, LI-TE R d. , PEITO U, TAI PEI 11 2, TAIW AN
Rep r esen t ant e aut o riz ad o na Euro p a:
ASUS CO MP UT E R Gmb H
Endereço, ci d ad e:
HA RKO RT ST R. 21-2 3, 40880 RA TI NG E N
País :
GERMA NY
declaramos o se guint e aparelho:
Nome do produto:
ASU S Phone
Nome do mod el o : ASU S_X 008D; ASU S_ X 008D A
O objeto da decl ar a ção acima d esc rito est á em conformidade co m a l egi sl ação de h ar mon iz aç ão da União apl i cá vel:
EMC Diretiva 2004/108/CE (até 19 de ab ril de 2016) e Diretiva 2014/ 30/ UE (a p a rti r de 20 de ab ri l de 2016)
EN 55 022:20 10+A C:20 11
EN 6 10 00- 3-2: 2 01 4
EN 550 13: 2 00 1+ A1: 2 00 3+A 2:2 00 6
EN 55024:2010
EN 6 10 00- 3-3: 2 01 3
EN 55 020:20 07+A 11:2 011
R&TTE – Direti va 1999/5/CE
EN 300 3 28 V 1 9 1(2 0 15 0 2)
EN 301 48 9 1 V 1 9 2( 20 1 1 0 9)
EN 300 44 0- 1 V1. 6. 1( 20 1 0-0 8)
EN 301 48 9- 3 V1. 6. 1( 20 1 3-1 2)
EN 300 44 0- 2 V1. 4. 1( 20 1 0-0 8)
EN 301 48 9- 4 V2. 1. 1( 20 1 3-1 2)
EN 301 5 11 V 9. 0. 2( 2 0 03 -0 3)
EN 301 48 9- 7 V1. 3. 1( 20 0 5-1 1)
EN 301 90 8- 1 V7. 1. 1( 20 1 5-0 3)
EN 301 48 9- 9 V1. 4. 1( 20 0 7-1 1)
EN 301 90 8- 2 V6. 2. 1( 20 1 3-1 0)
EN 301 48 9-17 V 2. 2. 1 (2 0 12-0 9)
EN 301 90 8-13 V 6. 2. 1 (2 0 14-0 2)
EN 301 48 9-24 V 1. 5. 1 (2 0 10-0 9)
EN 301 8 93 V 1. 7. 1( 2 0 12 -0 6)
EN 301 35 7- 2 V1. 4. 1( 20 0 8-1 1)
EN 300 33 0- 2 V1. 5. 1( 20 1 0-0 2)
EN 302 29 1- 2 V1. 1. 1( 20 0 5-0 7)
EN 5 03 60: 2 00 1/ A1: 2 01 2
EN 302 6 23 V 1. 1. 1( 2 0 09 -0 1)
EN 62479:2010
EN 50 566:20 13/A C:20 14
EN 62311:2008
EN 50385:2002
Assi n at ura
Loc al de emissão
Jerry Shen
Nome i m pr e ss o
15/07/2016
Data de emissão
CEO
Posi ç ão
2016
Ano mar c açã o CE foi apos ta por primeira vez
Subsemnatul,
Declaraţie de conformita te UE
Producător :
ASUST eK CO MPUTE R INC.
Adre să:
4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN
Repr ezent ant au tori zat în Europa:
ASUS COMPUTE R GmbH
Adre să, O raş:
HARKO RT S TR. 21-23, 408 80 RAT INGEN
Ţară:
GERMANIA
declară următorul ap arat :
Nume Produs :
ASUS Phone
Nu me M od el : ASUS _X008D; ASU S_ X0 08D A
Obiectul declarației descris mai sus este în conformitate cu legislația relev antă de armonizare a Uniunii :
CEM – Directiva 2004/108/CE (pân ă în 1 9 Ap rilie 2016) şi Directiva 20 14/ 3 0/ UE (p ân ă în 20 Ap rilie 2016)
EN 550 22: 2 01 0+ AC: 2 01 1
EN 61 000-3-2: 2 01 4
EN 550 13: 2 00 1+ A1: 2 00 3+ A2: 2 00 6
EN 550 24: 2 01 0
EN 61 000-3-3: 2 01 3
EN 550 20: 2 00 7+ A11: 20 11
R&T T E – Directiva 1999/5/CE
EN 30 0 328 V 1 9 1( 2015 02)
EN 30 1 489 1 V1 9 2( 2011 09)
EN 30 0 440-1 V1. 6.1( 2010-08)
EN 30 1 489-3 V1. 6.1( 2013-12)
EN 30 0 440-2 V1. 4.1( 2010-08)
EN 30 1 489-4 V2. 1.1( 2013-12)
EN 30 1 511 V 9. 0.2( 20 03-03)
EN 30 1 489-7 V1. 3.1( 2005-11)
EN 30 1 908-1 V7. 1.1( 2015-03)
EN 30 1 489-9 V1. 4.1( 2007-11)
EN 30 1 908-2 V6. 2.1( 2013-10)
EN 30 1 489-17 V 2. 2.1( 20 12-09)
EN 30 1 908-13 V 6. 2.1( 20 14-02)
EN 30 1 489-24 V 1. 5.1( 20 10-09)
EN 30 1 893 V 1. 7.1( 20 12-06)
EN 30 1 357-2 V1. 4.1( 2008-11)
EN 30 0 330-2 V1. 5.1( 2010-02)
EN 30 2 291-2 V1. 1.1( 2005-07)
EN 50 360:20 01/A 1:20 12
EN 30 2 623 V 1. 1.1( 20 09-01)
EN 624 79: 2 01 0
EN 505 66: 2 01 3/ AC: 2 01 4
EN 623 11: 2 00 8
EN 503 85: 2 00 2
Se mnătur ă
Loc ul e miterii
Jerry S hen
Nu me
15/07/2016
Dat a emiterii
CEO
Fun cţie
2016
An ul în c ar e Mar c ajul CE a fo st aplic at pentr u
pri ma oar ă
Biz , bu imz a altın d a kile r
EU Uygunluk Beyanı
Üret i ci:
ASUST eK COMPUTER I NC.
Adres:
4F, No. 15 0, LI-TE R d. , PEITO U, TAI PEI 11 2, TAIW AN
Avrup a’ daki Y etkili:
ASUS CO MP UT E R Gmb H
Adres, Şehi r:
HA RKO RT ST R. 21-2 3, 40880 RA TI NG E N
Ülk e:
ALMA NYA
Aş ağ ıd a ki ürün leri beyan ediyoruz :
Ürü n adı :
ASU S Phone
Mo d el ad ı :
ASU S_X 008D; ASU S_ X00 8D A
Yukarıda b eli rti l en beyanın kon u su birli k yasalarına göre uygundur:
E MC – Direktif 2004/108/EC 19 Ni san 2016’ya kadar ve Direktif 2014/30/EU 20 Ni s an 20 16
EN 55 022:20 10+A C:20 11
EN 6 10 00- 3-2: 2 01 4
EN 550 13: 2 00 1+ A1: 2 00 3+A 2:2 00 6
EN 55024:2010
EN 6 10 00- 3-3: 2 01 3
EN 55 020:20 07+A 11:2 011
R&TTE – Di rekti fi 1999/5/EC
EN 300 3 28 V 1 9 1(2 0 15 0 2)
EN 301 48 9 1 V 1 9 2( 20 1 1 0 9)
EN 300 44 0- 1 V1. 6. 1( 20 1 0-0 8)
EN 301 48 9- 3 V1. 6. 1( 20 1 3-1 2)
EN 300 44 0- 2 V1. 4. 1( 20 1 0-0 8)
EN 301 48 9- 4 V2. 1. 1( 20 1 3-1 2)
EN 301 5 11 V 9. 0. 2( 2 0 03 -0 3)
EN 301 48 9- 7 V1. 3. 1( 20 0 5-1 1)
EN 301 90 8- 1 V7. 1. 1( 20 1 5-0 3)
EN 301 48 9- 9 V1. 4. 1( 20 0 7-1 1)
EN 301 90 8- 2 V6. 2. 1( 20 1 3-1 0)
EN 301 48 9-17 V 2. 2. 1 (2 0 12-0 9)
EN 301 90 8-13 V 6. 2. 1 (2 0 14-0 2)
EN 301 48 9-24 V 1. 5. 1 (2 0 10-0 9)
EN 301 8 93 V 1. 7. 1( 2 0 12 -0 6)
EN 301 35 7- 2 V1. 4. 1( 20 0 8-1 1)
EN 300 33 0- 2 V1. 5. 1( 20 1 0-0 2)
EN 302 29 1- 2 V1. 1. 1( 20 0 5-0 7)
EN 5 03 60: 2 00 1/ A1: 2 01 2
EN 302 6 23 V 1. 1. 1( 2 0 09 -0 1)
EN 62479:2010
EN 50 566:20 13/A C:20 14
EN 62311:2008
EN 50385:2002
LVD – Di re ktifi 2006/95/19 Nis an 2016’ya kad ar ve Direktif 2014/ 35/EU 20 Ni san 2016
EN 60950-1: 2006 / A 1 2: 2011
EN 609501 2006 / A2 2013
EN 60065:2002 / A12: 20 11
E co d esi gn – Direktif 2009/125/EC
Regulation (E C) No. 1275/2008
R l ti (E C) N 642/ 2 0 09
Regulation (E C) No. 27 8/ 2 0 09
R l ti (E U) N 617/ 2 0 13
RoHS – Dir ektifi 2011/65/EU V er. 160217
CE işareti
Ekipman Sını fı 1
(EU uygunl uk i şar eti )
İmz a
Ta ip ei , Taiwan
Sürüm yeri
Jerry Shen
B ası lı Ad
15/07/2016
Sürüm tari hi
CEO
Pozi s yo nu
2016
CE iş ar eti ni n ilk eklendiği yı l
ASUS
Address: 4F, No.150 Li-Te Rd., Peitou, Taipei,
Taiwan
Tel: 886228943447
Fax: 886228907698
Declaration
We declare that the IMEI codes for this product,
ASUS
Phone, are unique to each unit and only assigned to
this model. The IMEI of each unit is factory set and
cannot be altered by the user and that it complies
with the relevant IMEI integrity related requirements
expressed in the GSM standards.
Should you have any questions or comments regarding
this matter, please contact us.
Sincerely yours,
ASUSTeK COMPUTER INC.
Tel: 886228943447
Fax: 886228907698
Support: http://vip.asus.com/eservice/techserv.aspx
Copyright © 2016 ASUSTeK COMPUTER INC.
All Rights Reserved.
You acknowledge that all rights of this Manual remain with ASUS.
Any and all rights, including without limitation, in the Manual or
website, and shall remain the exclusive property of ASUS and/or its
licensors. Nothing in this Manual intends to transfer any such rights,
or to vest any such rights to you.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY
OF ANY KIND. SPECIFICATIONS AND INFORMATION
CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE
AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE
CONSTRUED AS A COMMITMENT BY ASUS.
ZenTalk Fans Forum
(http://www.asus.com/zentalk/global_forward.php)

Navigation menu