ATI Electronics G328 EX-02S BLUETOOTH HEADSET User Manual

ATI Electronics (Shenzhen) Co. Ltd EX-02S BLUETOOTH HEADSET Print

a href="https://usermanual.wiki/ATI-Electronics" itemprop="url"> ATI Electronics >

Users Manual

EX-02s NEXT GEN BLUETOOTH® HEADSET FOR PS3™EXCLUSIVELY DESIGNED FOR GAMING ON PS3™MODEL G328AThis product is not designed, manufactured, sponsored or endorsed by Sony Computer Entertainment Inc. or any of its divisions. PS3™ is a trademark of Sony Computer Entertainment Inc. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Gioteck is under license. Specification & appearance are subject to change without prior notice. Copyright © 2010 GBB Group. All Rights Reserved.
02 | CONTENTS & PRECAUTIONS FEATURES & DETAILS | 03 CONTENTS02 | Contents & Precautions03 | Features & Details04 | Setup06 | Reversing Earhook08 | Charging09 | Operation10 | Troubleshooting11 | Care & Maintenancethank youThank you for purchasing the EX-02s Next Gen Bluetooth® Headset from Gioteck. We hope that this product will go beyond your expectations for a quality accessory. Please read this booklet thoroughly before using the product and review the PS3™ manual for additional details regarding PS3™ operation. Thank you & enjoy!features & detailsFollowing hot on the heels of the best selling EX-01, we are proud to bring you the EX-02s Next Gen Bluetooth® Headset, featuring a state-of-the-art chipset with built-in noise cancelling for optimum voice clarity, coupled with an incredibly long battery life. Now wearing a sleeker design overall with removable faceplates, so as to fine-tune your enjoyment online.precautions• Use only as intended.• This is a precision product and should be handled with care.• To avoid electrical shock, do not take the product apart.• Do not store in areas of extreme heat or cold.• Do not allow product to get wet or dirty; doing so may damage the product.• Do not clean with benzene; paint thinner, acetone, alcohol, or other such solvents.• Contains small parts. Not suitable for children under 3 years of age. warningsThis symbol indicates important installation, operation or maintenance instructions. Always follow these instructions closely.This symbol is intended to alert the user to the presence of potentially harmful or dangerous substances within the product’s enclosure. This symbol may also indicate a procedure that will void your product warranty. Recycling is important and will help to protect our environment and reduce landfill waste.This symbol on the product or in the manual means that your electronic equipment should NOT be disposed of in normal household waste at the end of its life. It should be disposed of separately. Please take it to a collection point for electrical waste.01 | Microphone02 | Speaker03 | Earhook04 | LED Feedback05 | Volume Decrease06 | Power / Mute / Reconnect07 | Volume Increase02030405060701
04 | SETUP SETUP | 05 pairing your headset1. Within the Settings' menu, press X on Accessory Settings.7. Press X to enter 0000 (four zeros) as the Pass Key and press X on OK.10. Scroll down and press X on Audio Device Settings.2. Press X on the icon labelled: Manage Bluetooth® Device.3. Press X on Yes to register your Bluetooth® Device.4. At the next screen, prepare your headset (from off) to be paired by holding down the power button continuously until the LEDs flash alternate Blue & Red. When it is connected the LEDs will flash Blue every 2 seconds. If not connected, it will flash blue every 4 seconds.5. Press X to Start Scanning. Once the scan is complete, the PS3™ will recognize all Bluetooth® wireless technology devices within range.6. Locate PS3 EX-02s from the list of available devices and press X.8. You will be taken to a new screen stating: Register completed.9. Press twice on your controller to go back to Accessory Settings.11. Choose PS3 EX-02s as your input and output device from the lists. Press X to confirm your choices.12. Scroll down and press X on OK. Your EX-02s Next Gen Bluetooth® Headset is now ready to use...enjoy :)3SECONDS
06 | REVERSING EARHOOK REVERSING EARHOOK | 07 reversing the earhookThe EX-02s ships with two earhooks, each marked [L] for the left ear and [R] for the right ear.After selecting the appropriate earhook, follow the instructions below:EARHOOK HOLESEARHOOK PINSUsing your fingernail, carefully pry the faceplate off the headset upwards and forwards.Lift clear from the body.Noting the 4 earhook pins, gently pull away the existing earhook, and store safely.Line-up the earhook holes with the pins and gently guide the replacement earhook over the top until set in position.Replace the faceplate by slowly pushing the faceplate hooks into the slots on the headset.Push the faceplate into place firmly to secure.
08 | CHARGING OPERATION | 09 charging your headsetThe headset contains a rechargeable Lithium-ion battery. Prior to using the headset for the first time, it is strongly recommended to fully charge the battery for 2 hours.Connect the USB cable to your PS3™ (01) and insert the DC connector (02) into the headset (03). The LED will illuminate red during the charging process and will be blue when fully charged. NOTE: Charging indication will be delayed for a few minutes if the headset has not been used for a long time.operating your headset1. To power on your headset, press and hold the power button for 1 second until the LED flashes Blue. NOTE: If the LED flashes Red only, the battery will need to be charged. A low battery is also denoted by a low tone repeated every 20 seconds.2. To fit your headset comfortably, flex the earhook and loop it around your ear. Position the speaker in your ear for optimal audio performance.3. To power off your headset, press and hold the power button for 1 second until the LED flashes Red.01charging timeNormally the battery is fully recharged within 3 hours. As soon as the battery is fully charged, the LED will be Blue. Disconnect the cable from the PS3™ and the EX-02s.game timeThe fully charged battery offers up to 8 hours continuous use. It is advisable to always recharge after lengthy gameplayso the headset is fully charged for thenext round.adjusting volumeTap the + button to increase the volume in increments until the headset reaches your desired volume level.Tap the - button to decrease the volume in increments until the headset reaches your desired volume level. If at any point the headset disconnects from the PS3™ press lightly on the power button to reconnect.mutingPress the power button briefly (less than 1 second) to mute the headset; repeat the process to un-mute. When in mute mode the LED will flash Red & Blue every 5 seconds. Do not try to pair the headset to the console, when the headset is charging. If it is charging, it will not pair to the PS3™.VOLUME DECREASEVOLUME INCREASEPOWER / MUTE / RECONNECT020103
Download:
Mirror Download [FCC.gov]
Document ID1363789
Application IDLtcyffXeBPVenMkOyZHsEQ==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize54.52kB (681468 bits)
Date Submitted2010-10-21 00:00:00
Date Available2010-10-21 00:00:00
Creation Date2010-09-01 18:14:52
Producing SoftwareAcrobat Distiller 9.3.3 (Macintosh)
Document Lastmod2010-10-21 14:12:18
Document TitlePrint
Document CreatorAdobe Illustrator CS4
FCC ID Filing: SF4-G328

Navigation menu