Aukey E Business SK-M30 Bluetooth speakers User Manual

SHENZHEN AUKEY E BUSINESS CO., LTD. Bluetooth speakers Users Manual

User Manual

SK-M30I1. Bluetooth mode2. Bluetooth version：Bluetooth 3.0，With the prompt, the Bluetooth device name is: AUKEYSK-M303. Long press (2 seconds) switch machine key, can open, shut down. After the boot, the speakerissued a note, the blue light flashing fast, at this time, the machine into the Bluetooth mode4. The blue light flashes rapidly pairing, mobile phone search to AUKEY SK-M30 device nameto confirm connection, the connection after the success of the blue light, speaker sounds,music playback process blue light flash slowly. The first open mobile phone paired bluetoothmobile phone, then open the box will automatically connect back.。.II、AUX IN model1. Boot state, insert the AUX IN line, automatically enter the AUX IN mode, the slow flashingblue light2. during the play, the indicator light flashes slowlyIII、charge1. Connect the USB cable into the speaker, connect the 5V charger or the computer to charge thebuilt-in battery；2. Charging "charge" indicator light red, filled with red lights out。IV、1.All the local mode boot volume default total volume 2/3. to protect the battery life and soundwork, software set battery voltage is lower than 6.5V speakers will automatically detect and voicealarm, the battery voltage is lower than 6.4V speakers will be issued voice prompt and setautomatic shutdown2.If the machine is stuck, press the reset button to resetV、15.19 Labelling requirements.This device complies with part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may causeundesired operation.15.21 Information to user.Any Changes or modifications not expressly approved by the party responsible forcompliance could void the user's authority to operate the equipment.15.105 Information to the user.Note: This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interferenceto radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one or more of thefollowing measures:-Reorient or relocate the receiving antenna.-Increase the separation between theequipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.-Consult the dealer or an experienced radio/TV technician for help

Navigation menu