Accton Technology WA3101ACC WLAN Access Point User Manual Part 1

Download:
Mirror Download [FCC.gov]
Document ID	325134
Application ID	pHjJre6W0w2mI3Fg6bPOYQ==
Document Description	User Manual Part 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	100.08kB (1250972 bits)
Date Submitted	2003-05-13 00:00:00
Date Available	2003-05-12 00:00:00
Creation Date	2003-04-03 20:09:33
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2003-05-08 16:50:25
Document Title	User Manual Part 1

4/1/03 Accton Draft—CONFIDENTIAL
Aruba 50
TM
Wireless
Point
WLAN Access
Access Point
Installation Guide
Model Name :
MP-50-B
180 Great Oaks Blvd. Ste B
San Jose, California 95119
Net www.arubanetworks.com
Tel 408.227.4500
Fax 408.227.4550
4/1/03 Accton Draft—CONFIDENTIAL
Copyright
Copyright © 2003 Aruba Wireless Networks, Inc. All rights reserved.
Specifications in this manual are subject to change without notice.
Originated in the USA.
Trademarks
AirOS, Aruba 50, and Aruba 5000 are trademarks of Aruba Wireless Networks in the United States and
certain other countries.
The K & Lock design is a registered trademark of the Kensington Technology Group in the United States
and certain other countries.
Any other trademarks appearing in this manual are owned by their respective companies.
ii
Aruba 50
Installation Guide
Part 0500007A
May 2003
4/1/03 Accton Draft—CONFIDENTIAL
Compliance
FCC - Class B
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with instructions, may cause harmful interference to
radio communications. However, there is no guarantee that the interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
z Reorient the receiving antenna
z Increase the separation between the equipment and receiver
z Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
z Consult the dealer or an experienced radio/TV technician for help
FCC
Caution: To
assure
continued
compliance, use
shieldedapproved
interface cables
to for
FCC Caution:
Any
changes
or modifications
notonly
expressly
by thewhen
partyconnecting
responsible
computer
or
peripheral
devices.
Any
changes
or
modifications
not
expressly
approved
by
the
party
responcompliance could void the user's authority to operate this equipment.
sible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
CAUTION STATEMENT: FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters (8
inches) between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Industry Canada - Class B
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as
set out in the interference-causing equipment standard entitled “Digital Apparatus,” ICES-003 of the
Department of Communications.
Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils numériques
de Classe B prescrites dans la norme sur le matériel brouilleur: “Appareils Numériques,” NMB-003 édictée
par le ministère des Communications.
Aruba 50
Installation Guide
iii
4/1/03 Accton Draft—CONFIDENTIAL
iv
Aruba 50
Installation Guide
Part 0500007A
May 2003
4/1/03 Accton Draft—CONFIDENTIAL
Contents
Preface . . . . . . . . . . . . .
Related Documents . . . . . . . . . .
Text Conventions . . . . . . . . . .
Contacting Aruba Wireless Networks .
. . vii
. vii
. viii
. . ix
Chapter 1
Introduction . . . .
Product Features . . . . . .
Ethernet Compatibility .
Radio Characteristics . .
Power Over Ethernet . .
Physical Description . . . .
Package Checklist . . .
Top Panel . . . . . . .
Rear Panel . . . . . . .
.. 1
. 1
. 2
. 2
. 2
. 3
. 3
. 3
. 5
Chapter 2
Setup & Installation
Requirements . . . . . . . . .
Select a Network Topology . . .
Perform Initial Setup . . . . . .
Direct SPOE to the Aruba WLAN Switch
Direct Terminal Connection . . . . . . .
Configure the Aruba 50 . . . . . . . . . .
Mount the Aruba 50 . . . . . . . . . . . . .
Free-Standing Placement . . . . . . . . .
Using the Mounting Kit . . . . . . . . .
. 7
10
10
11
12
14
15
15
Contents
4/1/03 Accton Draft—CONFIDENTIAL
Connect Required Cables . . . . . . . . . . . . . . . . 18
Direct SPOE to the Aruba WLAN Switch . . . . . 18
LAN or POE Connection . . . . . . . . . . . . . . 19
vi
Appendix A
Troubleshooting . . . . . . . . . . . . . . . 21
Appendix B
Port Specifications .
Console Port . . . . . . . . . .
FE Port . . . . . . . . . . . .
SPOE Adapter . . . . . . . . .
Appendix C
Product Specifications . . . . . . . . . . 27
Aruba 50
Installation Guide
23
23
24
25
Part 0500007A
May 2003
4/1/03 Accton Draft—CONFIDENTIAL
Preface
The preface includes the following information:
z A list of related documentation for further reading
z A key to the various text conventions used throughout this manual
z Aruba Wireless Networks support and service information
Related Documents
The following items are part of the complete documentation for the Aruba system:
z Aruba 50 Installation Guide (Part No. 050007A, May 2003)
z Aruba 5000 Installation Guide (Part No. 0500001A, May 2003)
z Aruba AirOS v1.0 User’s Guide (Part No. 050002A, May 2003)
Preface
vii
4/1/03 Accton Draft—CONFIDENTIAL
Text Conventions
The following conventions are used throughout this manual to emphasize important concepts:
TABLE 1 Text Conventions
Type Style
Description
Italics
This style is used to emphasize important terms and to mark the
titles of books.
System items
This fixed-width font depicts the following:
z Sample screen output
z System prompts
z Filenames, software devices, and certain commands when mentioned in the text.
Commands
In the command examples, this bold font depicts text that the user
must type exactly as shown.

In the command examples, italicized text within angle brackets represents items that the user should replace with information appropriate to their specific situation. For example:
# send 
In this example, the user would type “send” at the system prompt
exactly as shown, followed by the text of the message they wish to
send. Do not type the angle brackets.
viii
[ Optional ]
In the command examples, items enclosed in brackets are optional.
Do not type the brackets.
{ Item A | Item B }
In the command examples, items within curled braces and separated
by a vertical bar represent the available choices. Enter only one
choice. Do not type the braces or bars.
Aruba 50
Installation Guide
Part 0500007A
May 2003
4/1/03 Accton Draft—CONFIDENTIAL
Contacting Aruba Wireless Networks
**Information Pending
Preface
ix
4/1/03 Accton Draft—CONFIDENTIAL
Aruba 50
Installation Guide
Part 0500007A
May 2003
4/3/03 Accton Draft—CONFIDENTIAL
CHAPTER 1
Introduction
The Aruba 50 is part of a comprehensive wireless network solution. The device works in conjunction with the Aruba 5000 WLAN Switch and can act as a wireless access point or air monitor.
As a wireless access point, the Aruba 50 provides transparent, secure, high-speed data communications between wireless network devices (fixed, portable, or mobile computers with
IEEE
802.11b
wireless
adapters)
and the
wiredadapters)
LAN.
IEEE
802.11a
or IEEE
802.11b
wireless
and the wired LAN.
As a wireless air monitor, a uniquely Aruba feature, the Aruba 50 enhances wireless networks
by collecting statistics, monitoring traffic, detecting intrusions, enforcing security policies,
balancing wireless traffic load, self-healing coverage gaps, and more.
Product Features
Wireless dual-band
transceivertransceiver
Dual, omnidirectional antennas for reception diversity
Protocol-independent networking functionality
802.11a
to 54 Mbps
dataper
rate
per channel:
offers
high data to
ratewired
and LANs
reliable
wireless
802.11b –– up
11 Mbps
data rate
channel:
provides
an aalternative
that
can
dramatically cut costs
connectivity
802.11b – 11with
Mbps
data
rate per
channel:
provides (POE)
an alternative to wired LANs that can
Compatible
IEEE
802.3af
Power
Over Ethernet
dramatically cut costs
Compatible
with IEEEto
802.3af
Over Ethernet
(POE)
Seamless
connectivity
wired Power
LANs augment
existing
networks quickly and easily
Seamless
connectivity
to wired
LANs augment
existing
networks
quickly
and easily
Can
be centrally
managed,
configured,
and upgraded
through
the Aruba
WLAN
Switch
to
take
advantage
of
network
changes
and
security
improvements
Can be centrally managed, configured, and upgraded through the Aruba WLAN Switch
to take advantage of network changes and security improvements
Introduction
Chapter 1
4/3/03 Accton Draft—CONFIDENTIAL
Ethernet Compatibility
The Aruba 50 attaches to 10/100 Mbps Ethernet (FE) LAN segments that utilize
10Base-T/100Base-TX (twisted-pair) wiring. The device appears as an Ethernet node and
performs a routing function by moving packets between the wired LAN and remote workstations on the wireless infrastructure.
Radio
Characteristics
Power Over
Ethernet
The
50 supports
the IEEE
Power
Over Ethernet
(POE).
With as
this
For Aruba
IEEE 802.11a
operation,
the802.3af
Aruba standard
50 uses a for
radio
modulation
technique
known
feature, the Aruba 50 can accept electrical power from a compatible POE-capable device to
Orthogonal Frequency Division Multiplexing (OFDM), and a shared collision domain
which it is connected, directly over the FE cable. POE eliminates the need to provide separate
(CSMA/CA).
operates in the
5GHz
Unlicensed
National Information
Infrastructure
power
outlets inItenvironments
that
are difficult
or undesirable
to wire for electricity.
(UNII)
band.
Data is transmitted
over the
a half-duplex
radio channel
operating
at up compliant
to 54
The
Aruba
50 supports
POE only when
FE port is connected
to an
IEEE 802.3af
device
(such
the Aruba
5000and
WS-5032
Card). operating range up to 503 m (1650 ft.).
Megabits
peras
second
(Mbps),
with aLine
maximum
Power Over Ethernet
The Aruba 50 supports the IEEE 802.3af standard for Power Over Ethernet (POE). With this
feature, the Aruba 50 can accept electrical power from a compatible POE-capable device to
which it is connected, directly over the FE cable. POE eliminates the need to provide separate
power outlets in environments that are difficult or undesirable to wire for electricity.
The Aruba 50 supports POE only when the FE port is connected to an IEEE 802.3af compliant device (such as the Aruba 5000 WS-5032 Line Card).
Aruba 50
Installation Guide
Part 0500007A
May 2003
4/3/03 Accton Draft—CONFIDENTIAL
Physical Description
Package Checklist
The Aruba 50 package includes:
One Aruba 50 wireless access point
One mounting kit
One Serial & Power Over Ethernet (SPOE) adapter
One AC power adapter (3.3 VDC, 4 A)
Non-slip rubber foot-pads
Assorted documentation
Inform your supplier if there are any incorrect, missing or damaged parts. If possible, retain
the carton, including the original packing materials. Use them again to repack the product in
case there is a need to return it.
Top Panel
FIGURE 1-1 Aruba 50 Top Panel
Introduction
Chapter 1
4/3/03 Accton Draft—CONFIDENTIAL
Dual, omnidirectional Antennas for Wireless Communications (on sides)
The antennas swivel and should be oriented vertically (straight up and down) away from the
chassis for best performance.
Air Vents (on sides)
These vents promote proper air circulation for cooling the device. Do not allow these vents to
be obstructed by mounting equipment, network cables, or any other material.
Indicator LEDs
During operation, the Aruba 50 LEDs provide the following information:
TABLE 1-1 Aruba 50 LEDs
LED
State
Description
Ready
Off
The device is off or initializing.
Green
The device has passed self-test and is operating.
Flashing
The device is running a self-test or loading new software. If the
condition persists for more than one minute, refer to the troubleshooting information in Appendix A.
Off
No link on the FE port on back of the device.
Green
Link detected on the FE port.
Flashing
Transmitting or receiving data across the FE port. Flashing
rate is proportional to your network activity.
Off
Off
The802.11b
802.11awireless
wireless interface
interfaceisis disabled
disabled or
or down.
down.
The
Green
Green
The device is operating as an 802.11b access point.
LAN
.A
.B
Flashing
.B
Aruba 50
Installation Guide
The device is operating as an 802.11a access point.
The device is operating as an 802.11a air monitor.
Flashing
The device is operating as an 802.11b air monitor.
Off
The 802.11b wireless interface is disabled or down.
Green
The device is operating as an 802.11b access point.
Flashing
The device is operating as an 802.11b air monitor.
Part 0500007A
May 2003
4/3/03 Accton Draft—CONFIDENTIAL
Rear Panel
®
FIGURE 1-2 Aruba 50 Rear Panel
Kensington Security Slot
This slot is compatible with a Kensington MicroSaver Security Cable (not included) which
can be used to prevent the unauthorized removal of the Aruba 50 from its installed location.
To secure the Aruba 50, wrap a security cable around an immovable object, insert the cable’s
lock into the Kensington Security Slot, and turn the key.
Console Port
This port has a 9-pin, female serial connector. It is used primarily to connect a terminal during
initial setup of the Aruba 50. See Appendix B for port details.
Using the included SPOE adapter, this port can also be connected directly to an FE port on an
Aruba WLAN Switch that supports SPOE (see “Power Over Ethernet” on page 2). This
direct connection provides extra maintenance options during normal operation.
FE Port
This port attaches the Aruba 50 to 10Base-T/100Base-TX (twisted-pair) Ethernet LAN segments. The port automatically adjusts MDI/MDX to accept either straight-through or crossover cables. See Appendix B for port details.
This port also supports POE (see “Power Over Ethernet” on page 2). When POE is used, a
straight-through cable is required.
DC Power Socket
This socket is used to connect the included AC power adapter. If POE is being used to supply
power to the Aruba 50, the power adapter is not necessary.
Mounting Slots (on bottom)
The keyhole-shaped slots on the bottom of the chassis are used to mount the Aruba 50.
Introduction
Chapter 1
4/3/03 Accton Draft—CONFIDENTIAL
Aruba 50
Installation Guide
Part 0500007A
May 2003
4/3/03 Accton Draft—CONFIDENTIAL
CHAPTER 2
Setup & Installation
This chapter covers the following topics:
z Requirements for installing the Aruba 50
z Supported network topology options
z Initial setup of the Aruba 50
z Physical mounting of the device
z Connecting the required cables
z Testing the installation
Requirements
Before you install the Aruba 50, you must have the following:
z An operational Aruba WLAN Switch with a valid IP route to the LAN segment to which
the access point or air monitor will be connected.
z An appropriate physical location for the new access point or air monitor.
We recommend an up-to-date site survey to help determine the optimal location for your
Aruba 50. See your Aruba AirOS Software Guide for instructions on using the Aruba
WLAN Switch’s built-in planning tools.
802.11b
compliant
wireless compliant
Ethernet adapters
with
z Client devices with
802.11a
or 802.11b
wireless
Ethernet adapters with
TCP/IP compatible protocol installed.
Setup & Installation
Chapter 2
4/3/03 Accton Draft—CONFIDENTIAL
z One of the following power sources for the access point or air monitor:
An AC power outlet rated at 100~240 V, 50~60 Hz.
Power Over Ethernet (POE) capability on the device to which the Aruba 50 is connected (see “Power Over Ethernet” on page 2).
NOTE—When installing the Aruba 50 in plenums or air-handling spaces, as described in
NEC (2002) Article 300.22(C), the device must be powered using POE, and not the
included AC power adapter.
Select a Network Topology
The Aruba 50 can be installed in your network using the following topologies:
FIGURE 2-1 Aruba 50 Topology Options
Aruba 50
Installation Guide
Part 0500007A
May 2003
4/3/03 Accton Draft—CONFIDENTIAL
Direct Serial & Power Over Ethernet (SPOE) to the Aruba WLAN Switch (recommended)
In this topology, both the console and 10/100 Mbps Ethernet (FE) ports on the Aruba 50 are
connected to the included SPOE adapter. An 8-conductor, Category 5 UTP, straight-through
FE cable connects the adapter directly to the Aruba WLAN Switch with no intervening hubs,
routers, or other network equipment. The network port on the Aruba WLAN Switch must
include optional SPOE capability (see “Power Over Ethernet” on page 2).
This topology provides the following features:
z 10/100 Mbps Ethernet connectivity
z Electrical power through the FE cable
z Serial console connectivity through the FE cable
z Convenient initial setup through the Aruba WLAN Switch management interface either
before or after physical installation of the Aruba 50
z Extra console maintenance options during normal operation
POE connection through the LAN
In this topology, the Aruba 50 is connected to the LAN through a hub or switch that is POE
compatible (see “Power Over Ethernet” on page 2). An 8- or 4-conductor, Category 5 UTP,
straight-through FE cable is required. Initial setup requires a local serial console.
This topology provides the following features:
z 10/100 Mbps Ethernet connectivity (depending on the connecting port)
z Electrical power through the FE cable
z Versatile placement of the Aruba WLAN Switch and Aruba 50s within the network
Connection to a non-POE network port on the Aruba WLAN Switch or other network device
In this topology, the Aruba 50 is connected to the Aruba WLAN Switch either directly or
through the LAN. An 8- or 4-conductor, Category 5 UTP, straight-through or crossover FE
cable may be used. Initial setup requires a local serial console. Electrical power is supplied
using the included AC power adapter.
This topology provides the following features:
z 10/100 Mbps Ethernet connectivity (depending on the connecting port)
z Versatile placement of the Aruba WLAN Switch and Aruba 50s within the network
Setup & Installation
Chapter 2
4/3/03 Accton Draft—CONFIDENTIAL
Perform Initial Setup
The Aruba 50 requires some initial configuration before it will operate. The method used for
connecting to the Aruba 50 for initial setup depends on your intended network topology (see
Figure 2-1 on page 8).
Direct SPOE to the Aruba WLAN Switch
Use this procedure when connecting the Aruba 50 directly to an SPOE-compatible network
port on the Aruba WLAN Switch (see “Power Over Ethernet” on page 2). SPOE provides
10/100 Mbps Ethernet, serial connection, and power over one cable.
NOTE—If connecting the Aruba 50 through the LAN or to a non-SPOE network port on
the Aruba WLAN Switch, see the instructions on page 11.
Connect the included SPOE adapter to the Aruba 50.
Connect the adapter’s 9-pin serial connector to the Console port on the back of the
Aruba 50.
Connect the adapter’s male RJ-45 plug to the FE port on the back of the Aruba 50.
Connect the Aruba 50 to the Aruba WLAN Switch.
The connection between the Aruba 50 and the Aruba WLAN Switch requires an 8-conductor, Category 5 UTP, straight-through FE cable with RJ-45 connectors (see Appendix B for
port specifications).
Connect one end of the FE cable directly to the RJ-45 socket on the SPOE adapter that
was attached to the Aruba 50 in the previous step.
Connect the other end of the FE cable directly to an available SPOE network port on the
Aruba WLAN Switch.
NOTE—The Aruba 50 must be connected to the Aruba WLAN Switch without any intervening hubs, routers, or other networking equipment.
Telnet to the Aruba WLAN Switch Serial-Over-Ethernet (SOE) interface.
Run the Telnet client on your management workstation and connect to theAruba WLAN
Switch management IP address using logical port 2300. The connection command may vary
depending on the specific software used, but commonly appears as follows:
telnet  2300
10
Aruba 50
Installation Guide
Part 0500007A
May 2003

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2003:04:03 20:09:33Z
Modify Date                     : 2003:05:08 16:50:25+08:00
Page Count                      : 20
Creation Date                   : 2003:04:03 20:09:33Z
Mod Date                        : 2003:05:05 18:34:13+08:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Metadata Date                   : 2003:05:05 18:34:13+08:00
Has XFA                         : No

EXIF Metadata provided by EXIF.tools