Action Electronics 9R3VOH8512 8.5" LCD Monitor w/ FM Transmitter User Manual 1
Action Electronics Co.,Ltd. 8.5" LCD Monitor w/ FM Transmitter 1
Contents
- 1. Users Manual
- 2. Installation Guide
Users Manual
VOH8512 DROP-DOWN VIDEO MONITOR ® ELECTRONICS CORP. 128-7297 Important Notice An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle is in “park” or when the vehicle’s parking brake is applied. An LCD panel or video monitor used for television reception, video or DVD play that operates when the vehicle is in gear or when the parking brake is not applied must be installed to the rear of the driver’s seat where it will not be visible, directly or indirectly, to the operator of the motor vehicle. Warnings Do not use any solvents or cleaning materials when cleaning the video monitor. Do not use any abrasive cleaners, they may scratch the screen. Use only a lightly dampened lint free cloth to wipe the screen if it is dirty. Lock the LCD screen in the fully closed position when not in use. Before putting on headphones always adjust the volume setting to the lowest position. Remember to leave the dome light switch in the off or auto positions when the vehicle is unattended, as the dome lights, if left on, can drain the vehicle’s battery. Do not put pressure on the screen. Caution children to avoid touching or scratching the screen, as it may become dirty or damaged. Television Reception This entertainment system is designed primarily for viewing prerecorded movies or playing video games. Television reception in a moving vehicle will be limited and in some areas will not be possible due to weak and variable signal strength. Television viewing in a stationary vehicle will result in an improvement, but may still be marginal due to signal strength. The quality of the picture will not be consistent with home TV reception. Reception may be affected by weather and distance from TV station. A weak signal may cause the picture to roll, be snowy, or cause some color loss. -2 - Notice : The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Controls and Indicators Diagram 12 11 10 14 -4 - 13 Control Function Descriptions 1. Infrared Transmitter and Sensor – Use to transmit audio to the wireless headphones. Also allows the remote control to operate the VOH8512 and to control other accessories in the system. 2. POWER Button – Used to turn the system ON/OFF. Bright red when system is on, dim when off. 3. Three position Dome Light Switch • Auto – Automatically switches on the dome lights in conjunction with the vehicle’s interior illumination. • Off – The dome lights will not turn on in this position. • On – Turns on the dome lights. 10. IRT ON/OFF – Turn Infrared Transmitter power On/Off. 11. FM Select Button – When this button is pressed it will turn on the wireless FM Modulator and then cycle through FM frequencies (FM Off, Channel 1, 88.3MHz; Channel 2, 88.7MHz; Channel 3, 89.1MHz; Channel 4, 89.5MHz; Channel 5, 89.9MHz). 12. SOURCE Select – Used to select one of the three sources (AV1, AV2 ,AUX) 13. AUX – AUX input jack. 14. REAR Remote Sensor Eye – Allows the remote control to operate the VOH8512, and control other accessories, connected to the system. 4. Dome Lights – Provide additional interior illumination. 5. ( – ) Button – Picture quality adjustment (decrease). 6. ( + ) Button – Picture quality adjustment (increase). 7. PICTURE SELECT Button – Display picture adjustment mode (Brightness, Contrast, Color & Tint) 8. Screen Release – Moves in direction of the arrow to release the drop down screen. 9. Drop Down LCD Panel -5- Remote Control Operation IRTA 10 11 BATTERY COVER Battery Installation Before attempting to operate your Remote Control, install the batteries as described below. 1) Turn the Remote Control face down. Using a fingernail, lift the battery cover off. 2) Install two “AAA” batteries as shown. Make sure that proper polarity (+ or -) is observed. 3) Align the cover tabs with the remote control and press down until the cover clicks. The remote control will operate the VOH8512 and most Audiovox VCP’s. It is not a universal remote control and will not control equipment from other manufacturers. -6 - 12 13 14 15 16 17 18 19 20 21 IRTB 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 Remote Control Function Descriptions *Function control is available on the unit and the remote control. ** Not used in this model *** Function only available if optional TV Tuner is installed. 1. POWER Button* Press this button to turn the VOH8512 on. Press the button again to turn the VOH8512 off. 2. SOURCE Button* Each time the button is pressed, the audio / video source will change: AV1, AV2, AUX. 3. AUTO MEMORY Button (AUTO PROGRAM Button)*** When the AUTO MEMORY button is pressed, all channels are searched and channels that are detected with signals of sufficent levels are automatically stored. 4. SKIP/SEARCH Button*** This button selects betweeen SKIP and SEARCH mode. In “SKIP mode” the TV tuner will tune and stop on channels that are programmed into memory the when CHANNEL UP/DOWN buttons are used. When the SKIP mode is disabled, the TV will stop on all active channels. 5. ERASE/WRITE Button*** While tuned to a channel, pressing this button will store or erase the channel from memory. The stored channel numbers are displayed in “GREEN” and the erased channel numbers are displayed in “RED”. 6. Channel Up ( ) Button*** Use this button to increase the channel number to the desired channel and to scroll upward in menu options. -7- 7. MUTE Button Press this button to mute the audio. Pressing the button again restores the sound to the previously set level. 8. ENTER Button** Used to implement a selected setting or menu option. 9. LEFT ( ) Button** Allows the user to shift left in the menu options. 10. MENU Button** Allows the user to access the main menu. 11. RETURN Button** Allows the user to return to the menu while PBC on. Note : This function only present on VCD 2.0. 12. TV Mode Select Button Switches certain function keys on the remote control for TV functions. 13. DVD Mode Select button** Switches certain function keys on the remote control for DVD functions. -8 - 14. DISPLAY Button** Press to display DVD Disc current information. Press DISPLAY button Once Twice 3 times 4 times 5 times 6 times 7 times 8 times DVD Player Perform Display current TITLE , CHAPTER & elapsed time Display current SUBTITLE Display current AUDIO language & channel Display current surround mode Display current ANGLE Display A-B current status Display REPEAT current status Display off 15. FM TRANSMITTER ON/OFF Button Turns the FM Modulator ON/OFF. 16. AUDIO Button** Press this button to display and select the desired AUDIO language. Each time the button is pressed, the language or track changes. NOTE: The languages & tracks you can select are vary from disc to disc. -9- 17. ZOOM Button – Press this button to zoom the picture. ** Press ZOOM button Once Twice 3 times 4 times 5 times 6 times 7 times OSD DVD Player Perform 2X 3X 4X 1/2 1/3 1/4 OFF ZOOM picture 2 times ZOOM picture 3 times ZOOM picture 4 times Reduces picture to 1/2 normal size Reduces picture to 1/3 normal size Reduces picture to 1/4 normal size Returns to normal size 18. PAUSE ( ) Button** Allows the user to pause the playback. ) Button** 19. STOP ( Disc playback will be stopped. 20. PREVIOUS ( ) Button** Allows the user to return to the previous chapter or track. 21. NEXT ( ) Button** Allows the user to skip to the next chapter or track. 22. REV ( ) Button** Allows the user to search in a backward direction at 2, 4, 8, 16 and 32 times the normal speed. -10- 23. FWD ( ) Button** Allows the user to search in a forward direction at 2,4,8, 16 and 32 times the normal speed. 24. PLAY ( )Button** Press this button to activate the play mode when a disc is loaded into the disc compartment. 25. ANGLE Button** Press this button to display and select the available camera angles. Each time the button is pressed, the angle will change. NOTE: The number of angles vary from disc to disc. 26. SUBTITLE Button** Press this button to display and select the available subtitle language in DVD. Each time the button is pressed, the subtitle language changes. NOTE: The type & number of languages for subtitles vary from disc to disc. 27. SOURCE SELECT Button** With FM ON, used to select the Audio source to the FM Modulator, POD audio or SAT Audio (Second IR input). With FM OFF, used to select from SAT Audio or Car Audio. 28. CHANNEL SELECT Button* (FM Select) Selects the FM modulator Frequency (Frequency 1, 88.3MHz, Frequency 2, 88.7MHz, Frequency 3, 89.1MHz, Frequency 4, 89.5MHz, Frequency 5, 89.9MHz). 29. VCP Mode Select button Switches certain function keys on the remote control for VCP functions. 30. Screen Mode Button Allows the user to change the screen Aspect Ratio, 4:3 or 16:9. -11- 31. A-B Button** Allows the user to repeat playback of a DVD or CD from point A to point B. 32. REPEAT Button** Allows the user to repeat a chapter, title, track, or all of a DVD, CD or MP3. 33. Channel Down ( ) Button*** Use this button to decrease the channel number to the desired channel and to scroll downward in the menu options. 34. SETUP Button** Allows the user to access the DVD setup menu and select various playback options (Display, OSD Language, Defaults, Parental Control, Password, Exit Setup). 35. RIGHT ( ) Button** Allows the user to shift to the right in the menu options. 36. PIX Button (PICTURE SELECT)* Each time this button is pressed, the OSD will display the “adjustment bars” for BRIGHTNESS, CONTRAST, COLOR or TINT. Once the desired adjustment bar is displayed, use the VOLUME UP/DOWN buttons to adjust the setting. The display will automatically turn off if no adjustments are made within 6 seconds, or if any other button is pressed. 37. (–) Button* Used to make picture adjustments in picture select mode. -12- 38. (+) Button* Used to make picture adjustments in picture select mode. 39. NUMBER Buttons*** Allows the user to directly access specific TV channels. 40. IRT A ON/OFF Buttons* Turn Infrared Transmitter power ON/OFF for IR Wireless Headphone Channel A. 41. IRT B ON/OFF Buttons** Turn Infrared Transmitter power ON/OFF for IR Wireless Headphone Channel B. 42. EJECT ( )Button** Used to eject the disc. -13- Turning the VOH8512 ON or OFF 1. Sliding the screen release lock forward will unlock the LCD screen and it will drop down slightly. Pivot the screen downward until a comfortable viewing angle is reached. The hinge friction will hold the screen in position while the system is in use. 2. Pressing the power button on the unit or the remote control will turn the system on or off alternately. When in use the internal backlighting will illuminate the controls. 3. Press the source buttonon the unit or the remote control to select the desired source. Adjust the viewing angle by pivoting the screen to optimize the picture quality. 4. Remember to turn the unit off and pivot the LCD to the locked position when not in use. Overhead Dome Lights Dome Light Switch The lights integrated into the VOH8512 are controlled by a three position slide switch. Sliding the switch to the on position will turn the lights on. The off position will prevent the lights from turning on at all times, and the auto position will allow the lights to turn on and off with the vehicle’s interior lighting. Refer to the Installation Manual for the wire connections. Do not leave the vehicle unattended with the dome light switch in the on position, as this could result in a discharged battery. -14- Infrared Transmitter Remote Sensor The VOH8512 incorporates two Infrared sensors which relay signals from the remote control to allow the unit to be controlled simply by pointing its remote control at the remote sensor eye. The repeater function allows control of auxiliary equipment such as an Audiovox DVD Player or Video Cassette Player. The infrared sensor can relay signals from most manufacturer’s remote controls to its respective component connected to the AV input. In this case you must use the remote control supplied with the component. Remote Sensor Eye Accessories Wireless Headphones Remote Sensor Eye The VOH8512 includes a built-in infrared transmitter for use with Audiovox wireless headphones (Part Number MVIRHS). The volume can then be adjusted using the controls on each headset. Any number of wireless headphones may be used but they must be used within a line of sight from the transmitter, as infrared transmissions, like visible light travel only in a straight line. See the documentation accompanying your Audiovox wireless headphones. -15- Wireless FM Modulator The VOH8512 is equipped with buit-in wireless FM Modulator*, that allows you to listen to the VOH8512 audio signal by tuning your vehicle’s radio to the selected frequency, (88.3, 88.7, 89.1, 89.5, 89.9MHz). This feature is accessed by using either the FM transmitter buttons on the remote (ON/OFF, Channel Select) or the FM Select button on the unit. Whenever the FM modulator is on, broadcast reception on the vehicles radio will be poor. Switching off the FM modulator will allow normal radio reception. *NOTE: In certain areas where there are a large number of FM radio stations (e.g. large cities, urban areas), the reception of the FM signal from the overhead pod may not be satisfactory, resulting in static, distorted sound or signal bleed thru from strong local radio stations. This is not a defect in the product, but the result of a stronger local radio station overpowering the wireless FM transmitter in your overhead pod. If wireless reception is unsatisfactory, an optional wired relay box (Audiovox P/N SIRSWB) can be installed which will improve audio quality. Please contact the installer if this is the case with your product. AV1/AV2 Input The AV1/AV2 video input may be connected to a DVD Player, video game system, or other audio / video devices. To access the A/ V inputs, turn the VOH8512 on and press the source button on the VOH8512 or the Source button on the remote control until “AV1” or “AV2” is displayed on the screen. Turn the video source component on with its power button or remote control. The VOH8512 is now ready to play the audio and video signals from the source connected to AV1/AV2 input. The AV1/AV2 input requires a 8010730 cable. AUX A/V Input The VOH8512 will accept an audio/video signal input through the AUX jacks located on the side of the unit. The audio/video device could be a video game system, video camera, or other input device (use the supplied AV adaptor cable). Video Out The VOH8512 provides a video output for an optional video monitor(s). This output will provide a video signal that duplicates the signal displayed by the VOH8512 to an additional monitor or video display. Please see your installer for more inofrmation. -16- Troubleshooting PROBLEM SOLUTION Poor in vehicle radio reception • Check the condition of the vehicle’s radio antenna. • Verify that the antenna is fully raised. • If a relay box (SIRSWB) has been insatalled, make sure that the FM Modulator is turned OFF. • If a wired FM modulator has been installed, verify that it is turned OFF by using the remote or switch. IR sensor inoperative • Verify that the batteries in the remote are fresh. • Verify that the remote sensor eye is not obstructed. • Verify that the infrared transmitter is affixed over the sensor eye of the component to be controlled. No sound or distorted sound • Make sure your AV Source is connected properly. Make sure all cables are securely inserted into the appropriate jacks. • If you are using the IR headphones, make sure you turn on the IR power. • Make sure the FM Modulator is ON and the proper Frequency has been selected. -17- Replacement Parts Remote Control 136-3855 Specifications LCD Backlighting Edge Light Tube Resolution 1440 x 234 Pixels 336,960 Operation Temperature 32 -140º F (0 - 60º C) Storage Temperature -4 - 176º F (-20 - 80º C) Backlight life 10,000 Hours Video Display System NTSC / PAL Video Output 1.0Vp-p @ 75 ohms Power Source 12V DC Dimensions 1”H x 9.5”W x 8.75” 25.4mmH x 241.3mmW x 222.25mmD -18- 12 MONTH LIMITED WARRANTY Applies to Audiovox Mobile Video Products AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor. To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e.g. dated bill of sale), specification of defect(s), transportation prepaid, to the Company at the address shown below. This Warranty does not extend to the elimination of externally generated static or noise, to correction of antenna problems, to costs incurred for installation, removal or reinstallation of the product, or to damage to tapes, discs, speakers, accessories, or vehicle electrical systems. This Warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged through alteration, improper installation, mishandling, misuse, neglect, accident, or by removal or defacement of the factory serial number/bar code label(s). THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT. This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 24 MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. No person or representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product. Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and you may also have other rights which vary from state to state. U.S.A. : AUDIOVOX ELECTRONICS CORPORATION, 150 MARCUS BLVD., HAUPPAUGE, NEW YORK 11788 z 1-800-645-4994 CANADA : CALL 1-800-645-4994 FOR LOCATION OF WARRANTY STATION SERVING YOUR AREA -19- For Customer Service Visit Our Website At WWW.audiovox.com Product Information, Photos, FAQ’s Owner’s Manuals © 2004 Audiovox Electronics Corp., Hauppauge, NY 11788 128-7297
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2004:12:19 02:35:42Z Modify Date : 2005:01:14 10:07:44+08:00 Page Count : 20 Creation Date : 2004:12:19 02:35:42Z Mod Date : 2005:01:14 10:07:44+08:00 Producer : Acrobat Distiller 5.0.5 (Windows) Author : KONWAY03 Metadata Date : 2005:01:14 10:07:44+08:00 Creator : KONWAY03 Title : Untitled-1 Has XFA : NoEXIF Metadata provided by EXIF.tools