ADTRAN BSAP2020 BSAP-2020, DUAL RADIO User Manual

Adtran BSAP-2020, DUAL RADIO Users Manual

UserManual.wiki >

BSAP2020 User Manual >

Contents

1. Users Manual
2. Users Manual Regulatory

Users Manual

Quick Installation Guide CAP7250AG/CAP7252AG/CAP7253AG Wireless-AC+ABGN Long Range Ceiling Mount Dual Concurrent AP Please verify contents of the box before continuing to set up the CAP7250AG/CAP7252AG/CAP7253AG.  CAP7250AG/CAP7252AG/CAP7253AG Access Point  12V/2A 100V~240V Power Adaptor  Mounting Bracket  Wall/Ceiling Mounting Hardware Kit  T-Rail Mounting Hardware Kit *CAP7250AG is 3x3 concurrent 3x3 MIMO access point *CAP7252AG is 2x2 MIMO internal ANT access point *CAP7253AG is 2x2 MIMO external ANT access point Connecting the CAP7250AG/CAP7252AG/CAP7253AG 1) Ensure that the computer in use has an Ethernet Card (RJ-45 Ethernet Port). For more information, verify with User Manual. 2) Connect one end of the Category 5e Ethernet cable into RJ-45 port of the CAP7250AG/CAP7252AG/CAP7253AG and the other end to the RJ-45 port on the computer that will use the CAP7250AG/CAP7252AG/CAP7253AG. Ensure that the cable is securely connected to both the CAP7250AG/CAP7252AG/CAP7253AG and the Computer. 3) Connect the Power DC Inlet to the DC-IN port of the CAP7250AG/CAP7252AG/CAP7253AG and the Power to the electrical out. Note: CAP7250AG/CAP7252AG/CAP7253AG supports both IEEE 802.3at PoE(Power over Ethernet) and regular power adapter. You should use either one as the power source. Please do not apply both at the same time.