Advanced RF Technologies ADRFTECH004 Epoch-M1C-AF, Epoch-M1C-BF & Epoch-M1C-FF 800 MHz User Manual M1C QuickStart

Download:
Mirror Download [FCC.gov]
Document ID	723530
Application ID	Oq1+0iL4ydfyMPHvEWD1tg==
Document Description	Quick Start Guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	62.17kB (777170 bits)
Date Submitted	2006-11-01 00:00:00
Date Available	2006-11-01 00:00:00
Creation Date	2006-06-21 16:25:07
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2006-06-21 16:25:07
Document Title	M1C QuickStart.cdr
Document Creator	PScript5.dll Version 5.2.2
Document Author:	James

Epoch M1C Quick Start Guide
SERVER
DONOR
ADRF
CONNECT ANTENNAS/CABLES
INSERT CD AND INSTALL SOFTWARE
CONNECT USB CABLE AND INSTALL DRIVERS
STATUS WINDOW
RUN SOFTWARE AND POWER ON M1C
CHECK FOR PROPER COMMUNICATION
SELECT OPERATING BAND(S)
Documentation and Software can be found on the CD-ROM
included in the M1C box.
Technical Support
Contact ADRF’s Technical Support Team for assistance with:
-Software Questions
-Setting up the M1C
-M1P Operation
-Troubleshooting Questions
1-323-254-8131
1-800-313-9345
www.adrftech.com
MODEM SETUP
CHECK SIGNAL LEVELS
Epoch M1C Quick Start Guide
ANTENNA CONNECTION
Connect the donor/server antenna cables to
the M1C’s antenna ports on top as shown in
figure 1.
Adjust antenna positioning to assure
maximum RSSI and coverage.
SOFTWARE/POWER
Now run the M1C software, and plug in the
power converter. (AC/DC Adapter)
SOFTWARE INSTALL
Place the installation CD into your CD-ROM.
The setup will start automatically.
Follow the InstallShield Wizard to completely
install the M1C software.
SOFTWARE COMMUNICATION
Click the SET button, then the “INSTALL” button.
When installation is complete go to STATUS menu
and verify input/output power, gains, etc.
When the Found New Hardware wizard
comes up, click next to automatically search
the CD-ROM for drivers.
Verify that the AUTO CONNECTION box is checked.
Enter the Site ID and Manager IP information
provided by the carrier.
Connect the USB cable to your computer and
the M1C.
*The installation CD must be in the CD-ROM.
Then turn on the M1C.
*If the M1C does not have a modem inside, proceed to step 8.
USB DRIVER INSTALLATION
When prompted, connect the USB cable and
install the driver. (Step 3)
After opening the software verify that it is
communicating with the M1C by checking
that the status window has loaded properly
as shown in figure 5.
MODEM SETUP
BAND SELECTION
Go to INSTALL menu on the top of the
GUI.
Click on the band you want selected.
Documentation and Software can be found on the CD-ROM
included in the M1C box.
POST SURVEY
Congratulations! The M1C has been
successfully installed and is ready for use.
Technical Support
Contact ADRF’s Technical Support Team for assistance with:
-Software Questions
-Setting up the M1C
It is recommended to do a walk-through
inside of the building and make live phone
calls to verify RF coverage.
-M1C Operation
-Troubleshooting Questions
1-323-254-8131
1-800-313-9345
www.adrftech.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2006:06:21 16:25:07-07:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2006:06:21 16:25:07-07:00
Format                          : application/pdf
Title                           : M1C QuickStart.cdr
Creator                         : James
Document ID                     : uuid:d551a0b0-8609-4ac9-bdb7-f077ec925d8a
Instance ID                     : uuid:0c438ade-5e85-472b-b5f1-212376109401
Page Count                      : 2
Author                          : James

EXIF Metadata provided by EXIF.tools