Advantech Co MICA-101 10.4" Fanless Mobile Clinical Assistant User Manual MICA Manual update on 031009

Download:
Mirror Download [FCC.gov]
Document ID	1135990
Application ID	PpjUhvggl0FXOdkeXU8gXQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	183.6kB (2294980 bits)
Date Submitted	2009-07-08 00:00:00
Date Available	2009-07-08 00:00:00
Creation Date	2009-03-10 19:23:33
Producing Software	Acrobat PDFWriter 5.0Windows NT ª©
Document Lastmod	2009-06-26 11:56:07
Document Title	MICA Manual_update on 031009.doc
Document Creator	MICA Manual_update on 031009.doc - Microsoft Word
Document Author:	Mike.Tsao

10.4" Fanless
Mobile Clinical Assistant
®
MICA-101XXXXXXXXXXXX("x"
10.4" Intel Atom processor-based
Mobile
can
beClinical
0-9 or Assistant
A-Z or blank or
any alphanumeric character )
User’s Manual
1/41
MICA Tablet PC User’s Manual
FCC Class B
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a residential environment. This equipment generates, uses and
can radiate radio frequency energy. If not installed and used in accordance with this user's
manual, it may cause harmful interference to radio communications.
Note that even when this equipment is installed and used in accordance with this user's
manual, there is still no guarantee that interference will not occur. If this equipment is believed
to be causing harmful interference to radio or television reception, this can be determined by
turning the equipment on and off. If interference is occurring, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and the receiver
Connect the equipment to a power outlet on a circuit different from that to which the
receiver is connected
Consult the dealer or an experienced radio/TV technician for help
Warning
Any changes or modifications made to the equipment which are not expressly
approved by the relevant standards authority could void your authority to operate
the equipment.
Caution
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the
manufacturer. Dispose of used batteries according to the manufacturer’s
instructions.
Packing List
Before installing your MCA, ensure that the following materials have been received:
- MICA-101 x1
- Stylus pen x1
- Power adapter x1
- Battery x1
- USB Type A to Mini B Cable x1
- Software CD x3 (Drivers and Utility, Recovery OS, Recovery Image)
- Warranty card x1
Figure 1.0 MICA and Accessories
Warning
2/41
To prevent electric shock, Do not remove cover.
No user serviceable parts inside, refer servicing to qualified personnel.
MICA Tablet PC User’s Manual
Additional Information and Assistance
1. Visit the Advantech websites at www.advantech.com or www.advantech.com.tw where
you can find the latest information about the product.
2. Contact your distributor, sales representative, or Advantech's customer service center for
technical support if you need additional assistance. Please have the following information
ready before you call:
Product name and serial number
Description of your peripheral attachments
Description of your software (operating system, version, application software, etc.)
A complete description of the problem
The exact wording of any error messages
This equipment is a source of electromagnetic waves. Before use please, make sure that
there are not EMI sensitive devices in its surrounding which may malfunction
therefore.
Warning
1. Input voltage rated 100-240 VAC, 47-63 Hz, 1.62-0.72A,
Output Voltage rated 15VDC , max 4.2A
2. Use a 3V @ 195 mA lithium battery (Model No. BR2032)
3. Maintenance: to properly maintain and clean the surfaces, use only approved
products or clean with a dry applicator
Safety Instructions
1. Read these safety instructions carefully.
2. Keep this User's Manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not
use liquid or spray detergents for cleaning.
4. For plug-in equipment, the power outlet socket must be located near the equipment and
must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or letting it fall may
cause damage.
7. The openings on the enclosure are for air convection. Protect the equipment from
overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before connecting the equipment to
the power outlet.
9. Position the power cord so that people cannot step on it. Do not place anything over the
power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power source to avoid
damage by transient over voltage.
12. Never pour any liquid into an opening. This may cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should be opened only by
qualified service personnel.
14. If one of the following situations arises, get the equipment checked by service personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment does not work well, or you cannot get it to work according to the user's
manual.
e. The equipment has been dropped and damaged.
f. The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED ENVIRONMENT WHERE
THE STORAGE TEMPERATURE IS BELOW -20° C (-4° F) OR ABOVE 60° C (140° F). THIS
MAY DAMAGE THE EQUIPMENT.
16. If your computer is losing dramatic time or the BIOS configuration reset to default, the
battery has no power.
Caution
1. Do not replace battery yourself. Please contact a qualified technician or your
retail.
2 .The computer is provided with a battery-powered real-time clock circuit. There
is a danger of explosion if battery is incorrectly replaced. Replace only with same
or equivalent type recommended by the manufacture. Discard used batteries
3/41
MICA Tablet PC User’s Manual
according to the manufacturer’s instructions
17. IMPROPER INSTALLATION OF VESA MOUNTING CAN RESULT IN SERIOUS
PERSONAL INJURY! VESA mount installation should be operated by professional technician,
please contact the service technician or your retail if you need this service.
18. CLASSIFICATION:
Supply Class I adapter
No applied part
IP54
Continuous Operation
Not AP or APG category
19. Disconnect device: Appliance inlet.
20. Follow the national requirement to dispose unit.
21. Maintenance: to properly maintain and clean the surfaces, use only the approved
products or clean with a dry applicator.
22. Contact information:
No.1, Alley 20, Lane 26, Reuiguang Road Neihu District, Taipei,
Taiwan 114, R.O.C.
TEL: +886 2-27927818
23.
24. This equipment shall not be used for life support system.
25. Accessory equipment connected to the analog and digital interfaces must be in
compliance with the respective nationally harmonized IEC standards (i.e. IEC 60950 for data
processing equipment, IEC 60065 for video equipment, IEC 61010-1 for laboratory equipment,
and IEC 60601-1 for medical equipment.) Furthermore all configurations shall comply with the
system standard IEC 60601-1-1. Everybody who connects additional equipment to the signal
input part or signal output part configures a medical system, and is therefore, responsible that
the system complies with the requirements of the system standard IEC 60601-1-1. The unit is
for exclusive interconnection with IEC 60601-1 certified equipment in the patient environment
and IEC 60XXX certified equipment outside of the patient environment. If in doubt, consult the
technical services department or your local representative.
26. User not to contact SIP/SOPs and the patient at the same time.
27. The sound pressure level at the operator's position according to IEC 704-1:1982 is no
more than 70dB (A).
DISCLAIMER
This set of instructions is given according to IEC 704-1. Advantech disclaims
all responsibility for the accuracy of any statements contained herein
Explanation Of Graphical Symbols:
This symbol warns user that uninsulated voltage within the unit may have sufficient
magnitude to cause electric shock. Therefore, it is dangerous to make any kind of
contact with any part inside this unit.
This symbol alerts the user that important literature concerning the operation and
maintenance of this unit has been included. Therefore, it should be read carefully in
order to avoid any problems.
4/41
MICA Tablet PC User’s Manual
Stand-by
Direct Current
Section 15.105 Information to the user.
This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Part 15.21 information for user
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance
could void your authority to operate the equipment.
FCC RF Radiation Exposure Statement:
1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This device was tested for typical lap held operations with the device contacted directly to the
human body to the back side of the notebook computer. To maintain compliance with FCC RF exposure
compliance requirements, avoid direct contact to the transmitting antenna during transmitting.
except above RF exposure statement, for devices used at 5.15-5.25GHz should add the following wording at
their user manual.
According to FCC 15.407(e), the device is intended to operate in the frequency band of 5.15GHz to 5.25GHz
under all conditions of normal operation. Normal operation of this device is restricted to indoor used only to
reduce any potential for harmful interference to co-channel MSS operations.
5/41
MICA Tablet PC User’s Manual
Chapter 1General Information
1.0 Introduction
MICA is a multimedia Atom Mobile processor-based computer that is designed to serve as a
Mobile Clinical Assistant (MCA). It is a PC-based system with 10.4" color TFT LCD display
and 18-bit stereo audio controller. MICA is a mobile for system integrators, this simple,
complete and highly integrated multimedia system lets you easily build a Mobile Clinical
Assistant Terminal into your applications.
Common industrial applications include factory automation systems, precision machinery,
and production process control. It is also suitable for many non-industrial applications,
including interactive kiosk systems, entertainment management, and car park automation.
MICA is a reliable, cost-effective solution to your application’s processing requirements.
1.1 Specifications
Item
Description
Dimension (W×D×H )
254.7mm x 254.7mm x 30mm
Weight
1.5Kg (Max)
IntelR Atom Processor and IntelR Poulbso SCH
CPU and Chipset
- Z510/1.1GHz (FSB 400MHz)
- Z530/1.6GHz (FSB 533MHz)
Memory
DDR2 667MHz SO-DIMM 2GB
Graphics
IntelR Integrated 3D Graphics
Audio
Realtek ALC888
Integrated speakerx1, Microphone x2
USB 2.0x1
I/O Ports
DC-in
Cradle connector
Card reader for smart card
Expansion
mini-PCIe x1
Display
10.4”XGA TFT LCD
Touch Panel
Dual mode –Digitizer & Resistive
Stylus Pen
Electronic stylus pen with side switch and eraser
Storage
1.8”PATA HDD 60GB
WiFi- 802.11AGN WLAN
Communication
Bluetooth V2.0
Ingress Protection
IP54
Thermal Solution
Fanless Design
Windows XP Professional
Operating System
Windows Vista Business
Windows XP Embedded
Barcode Scanner
1D/2D and UDSI Barcode scanner
RFID
- 13.56MHz RFID with ISO15693 & ISO14443A/B
6/41
MICA Tablet PC User’s Manual
- Active Tag function
Camera
Web camera
2.0Mega pixel camera with LED light
Auto-focus supported
1.3M pixel VGA camera (Optional)
Power button: On the left side of MICA
Barcode scan button: On the right side of MICA.
Composite button
Ÿ Navigator button: One 5-way directional control button for navigation.
Control Button
Ÿ Camera snapshot button
Ÿ RFID read trigger button
Ÿ Screen lock button
Ÿ 2 programmable buttons (Default setting):
Programmable button 1 for S3 mode
Programmable button 2 for WiFi on/off
Power LED & Battery status LED
Indicated LED
Ÿ
Full à Green
Ÿ
Charging à Green + Red
Ÿ
Low à Red
RFID LED
Ÿ
Blue LED for RFID read trigger
WiFi LED
Ÿ
Blue LED for enabling Wireless LAN
Bluetooth
Ÿ
Blue flickering LED for enabling Bluetooth
SINPRO MPU63
Power adapter
INPUT:100-240V ~ 1.5A 50/60Hz
OUTPUT: 15V, 4.2A Max.60W
Battery
Backup battery
Lithium -ion battery (11.1V@3760mAh)
2.5Hr charging time
Lithium -ion battery 40mAh
24Hr charging time
Normal mode: general using
Power management
Idle mode: turn-off the LCD backlight only.
Suspend mode: S3 (STR) /S4 (STD)
Power-off mode: only RTC alive
Certification
Standards
ACPI 3.0 compliant
FCC part 15 class B
Regulatory
CAN/CSA
Optional: R&TTE, GSM, RFID
Saf ety
7/41
FCC/ANSI
UL, CUL, CE, (IEC/EN60601-1)
MICA Tablet PC User’s Manual
CB60601, CB60950
UL2054, UN38.3 for battery pack
BSMI
CCC
Table 1.1: MICA specification
1.2 Cradle Specifications
Item
Description
Form Factor
TBD
Weight
TBD
USB x1
LAN x1
I/O Ports
VGA x1
Power-in Jack
Table 1.2: Cradle specification
1.3 LCD Panel Specifications
LCD model
Toshiba LTD104KA1S
Display type
TFT color LCD
Size (Diagonal)
10.4”
Resolution
1024(W) x 768(H) pixels (XGA)
Maximum colors
256K(R,G,B 6 bit color data)
Pixel pitch (mm)
0.2055(W) x 0.2055(H)
viewing
(Upper+Lower)
50 degree
angle
(Left+Right)
90 degree
Luminance (cd/m )
230 cd/m
Contrast ratio
250:1
Lamp lifetime
50,000 hours
Table 1.2: Toshiba LCD Panel specification
1.4 Touchscreen Specifications
Type
Resolution
Light Transmission
Controller
Power Consumption
Software Driver
Durability (touches in a
lifetime)
Analog Resistive
Continuous
75%
USB interface
+5V@100 mA
Supports Windows® XP Professional, Windows® Vista
Business
30 million
Table 1.3: Touch screen specification
Note
8/41
MICA Terminal with the optionally installed touchscreen will share USB. Once
the touch screen is installed, one USB cannot be used for other purposes.
MICA Tablet PC User’s Manual
Cleaning/Disinfecting
During normal use MICA may become soiled and should, therefore, be cleaned regularly.
Agents: Green tinctured soap and Enzymatic detergents
Steps:
1. Wipe MICA with a clean cloth that has been moistened in the cleaning solution.
2. Prepare agent per manufacturer’s instructions or hospital protocol.
3. Wipe thoroughly with a clean cloth
Cautions
9/41
Do not immerse or rinse MICA and its peripherals. If you accidentally spill liquid
on the device, disconnect the unit from the power source. Contact your Biomed
regarding the continued safety of the unit before placing it back in operation.
Do not spray cleaning agent on the chassis.
Do not use disinfectants that contain phenol.
Do not autoclave or clean MICA or its peripherals with strong aromatic,
chlorinated, ketone, ether, or Esther solvents, sharp tools or abrasives. Never
immerse electrical connectors in water or other liquids.
MICA Tablet PC User’s Manual
1.5 Dimensions
Figure 1-1: Dimensions of MICA
Figure 1-2: Dimensions of Cradle
10/ 41
MICA Tablet PC User’s Manual
Chapter 2 System Setup
2.1 A Quick Tour of MICA
Before you start to set up MICA, take a moment to become familiar with the locations and
purposes of the controls, drives, connections and ports, which are illustrated in the figures
below.
When you place MICA upright on the desktop, its front panel appears as shown in Figure 2-1.
A: LED Indicator
B: Composite button
Figure 2-1: Front View of MICA
When you look at the left side of the panel PC, you will see the power button and P2 button
on the top view. Figure 2-2.
A: Power Button
B: Programmable button 2
Figure 2-2: Left side view of MICA
11/41
MICA Tablet PC User’s Manual
When you look at the right side of the panel PC, you will see the Bar code scanner button and
Stylus pen. Figure 2-3.
A: Bar scanner button
B: Stylus Pen
Figure 2-3: Left side view of MICA
When you turn MICA around and look at its rear cover. Figure 2-4.
A: Sensor of Bar code scanner
B: RFID sensor area
C: Camera lens
D: Stylus pen
E: battery pack
F: Heatsink of system
G: take out battery button
Figure 2-4: Rear view of MICA
When you look at the bottom side of the panel PC, you will see the I/O ports (power jack/USB
jack/smart card slot) and charging connector. Figure 2-5.
12/ 41
MICA Tablet PC User’s Manual
Figure 2-5: Bottom view of MICA
13/ 41
MICA Tablet PC User’s Manual
2.2 Installation Procedures
2.2.1 Powering MICA by Battery Power
MICA is supplied with a powerful rechargeable battery. To install and maintain the battery, or
if it needs to be replaced, follow the instructions in
this section.
Caution! Do not attempt to replace the battery with any others than the models
recommended and manufactured specifically for this MICA.
Note! Before using MICA, please connect the adapter into MICA to charge the battery and
backup battery at least 24Hrs.
2.2.1.1 Installing a Battery
The battery is designed specifically for installation with MICA. It fits exactly into the back of
the PC and delivers precisely the exact voltage required to power the unit. Under normal
conditions, a fully charged battery will power the PC for up to 5.0 hours. Normally, it
requires 2.5 hours to fully charge a new battery.
l To install or replace the battery pack:
1. Turn off MICA
2. Disconnect any peripheral devices from MICA.
3. Press the position as thumb in Figure2-6 then can remove the battery.
Figure 2-6: Press the position
14/ 41
MICA Tablet PC User’s Manual
4. Take out the battery from the system through below Figure2-7.
Figure 2-7: Take out the battery from the sytem
5. Push battery pack into the slot until click sound alarmed in Figure2-8.
Figure 2-8: Push battery back to slot
15/ 41
MICA Tablet PC User’s Manual
2.2.2 Connecting the adapter with MICA
Be sure to always handle the power cords by holding the plug ends only.
Follow these procedures in order:
1. Connect the end of the AC Adapter cord to the DC Power inlet of MICA. (See Figure 2-9.)
2. Connect the female end of the power cord to the AC inlet of the AC Adapter
3. Connect the 3-pin male plug of the power cord to an electrical outlet.
Figure 2-9: Connecting the AC Adapter power supplier with MICA
2.2.3 Connecting the power cord for CRADLE
Be sure to always handle the power cords by holding the plug ends only.
Follow these procedures in order:
1. Connect the end of the AC Adapter cord to the DC Power inlet of the CRADLE. (See Figure
2-10.)
2. Connect the female end of the power cord to the AC inlet of the AC Adapter
3. Connect the 3-pin male plug of the power cord to an electrical outlet.
4. Open the power switch on AC Adapter.
2.2.4 Connecting the keyboard and mouse
Connect the USB port to the USB mouse and keyboard port on the I/O section of MICA. (See
Figure 2-10.)
16/ 41
MICA Tablet PC User’s Manual
Figure 2-10: Connecting the Keyboard or Mouse
2.2.6 Switching on the power
Switch on the power switch on the left side. Press the power switch button then can power on
the system.
17/ 41
MICA Tablet PC User’s Manual
18/ 41
MICA Tablet PC User’s Manual
2.3 LED Signals
MICA is an equipment with a set of Light Emitting Diodes (LEDs) located along the right top of
the front Bezel.
Figure 2-11: Front side view of MICA
2.3.1 Bluetooth ON/OFF LED
Blue flickering : enable Bluetooth function
Dark : disable Bluet ooth function
2.3.2 RFID ON/OFF LED
Blue : enable RFID function
Dark : disable Bluetooth function
2.3.3 WiFi ON/OFF LED
Blue : enable Wireless function
Dark : disable Wireless function
2.3.4 Power/Battery Status LED
19/ 41
Green : full charged
Red : Low battery
Green+Red: battery charging
MICA Tablet PC User’s Manual
2.4 Buttons
The hotkey button is on the right up side of front bezel.
Figure 2-12: Hotkey button of MICA
2.4.1 Barcode scanner button
The Barcode function button is up of the right side.
Figure 2-13: Right side of MICA
2.4.2 Power and P2 button
The Power button and P2 function buttons are up of the left side.
20/ 41
MICA Tablet PC User’s Manual
Figure 2-14: Left side button of MICA
2.4.3 Battery remove button
The battery remove button is in the center of the back side.
Figure 2-15: battery remove button of MICA
21/ 41
MICA Tablet PC User’s Manual
2.5 Running the BIOS Setup Program
Your MICA is likely to have been properly set up and configured by your dealer prior to
delivery. You may still find it necessary to use the BIOS (Basic Input -Output System) setup
program to change system configuration information, such as the current date and time or
your type of hard drive. The setup program is stored in read-only memory. It can be accessed
either when you turn on or reset the panel PC, by pressing the " Crtl+Alt+Del " key on your
keyboard immediately after powering on the computer.
The settings you specify with the setup program are recorded in a special area of memory
called CMOS RAM. This memory is backed up by a battery so that it will not be erased when
you turn off or reset the system. Whenever you turn on the power, the system reads the
settings stored in CMOS RAM and compares them to the equipment check conducted during
the power on self-test (POST). If an error occurs, an error message will be displayed on
screen, and you will be prompted to run the setup program.
2.6 Installing System Software
Recent releases of operating systems from major vendors include setup programs which load
automatically and guide you through hard disk preparation and operating system installation.
The guidelines below will help you determine the steps necessary to install your operating
system on the panel PC hard drive.
Note
Some distributors and system integrators may have already pre-installed system
software prior to shipment of your panel PC.
If required, insert your operating system's installation or setup diskette into the optical drive
until the release button pops out.
The BIOS supports system boot-up directly from the CD-ROM drive. You may also insert your
system installation CD-ROM disk into the CD-ROM drive..
Power on or reset the system by pressing the "Ctrl"+"Alt"+"Del" keys simultaneously. MICA
Terminal will automatically load the operating system from the diskette or CD-ROM.
If you are presented with the opening screen of a setup or installation program, follow the
instructions on screen. The setup program will guide you through preparation of your hard
drive, and installation of the operating system.
22/ 41
MICA Tablet PC User’s Manual
2.8 Installing the Drivers
After installing your system software, you will be able to set up the Ethernet, SVGA, audio and
touch screen functions. All the drivers except the CD-ROM drive driver are stored in a CDROM disc entitled "Drivers and Utilities” which can be found in your accessory box.
The standard procedures for installing the Ethernet, SVGA, audio and touch screen drivers
are described in Chapters 3, 4, 5, 6 and 7 respectively.
For your reference, the directory of drivers on the "Drivers and Utilities" CD-ROM is:
Figure 2-16: The file directory on "Drivers and Utilities" CD-ROM
Note
The drivers and utilities used for MICA are subject to change without notice. If in
doubt, check Advantech's website or contact our application
engineers for the latest information regarding drivers and utilities.
23/ 41
MICA Tablet PC User’s Manual
Chapter 3 Graphic chipset Setup
3.1 Introduction
The MICA uses Intel® Poulbso SCH chipset for its graphic controller. Poulsbo
is a single -chip system controller hub (SCH) that consists of an integrated graphics
controller, memory controller, and I/O controller. The SCH contains functionality
normally found in separate GMCH (front side bus interface, integrated graphics,
memory controller) and ICH (platform I/O expansion) components.
3.2 Installation of Chipset Driver
Complete the following steps to install the chipset driver. Follow the procedures in the flow
chart that apply to the operating system that you are using within your MICA.
Step 1 -1 double click the driver file and click next button
Step 1 -2 click yes button for license agreement
25/ 41
MICA Tablet PC User’s Manual
Step 1 -3 click next button for installation informaiton
Step 1 -4 program has copy relevant file into system and click next to perform install
26/ 41
MICA Tablet PC User’s Manual
Step 1 -5 click finish button to restart system
Important
The following windows illustrations are examples only. You must follow the flow
chart instructions and pay attention to the instructions which appear on your
screen.
3.3 Further information
27/ 41
MICA Tablet PC User’s Manual
For further information about the CHIPSET, VGA installation in your MICA, included Driver
updates, troubleshooting guides and FAQ lists please visit the following web resources.
Intel website: www. Intel.com
Advantech websites: www.advantech.com
28/ 41
MICA Tablet PC User’s Manual
Chapter 4 Audio Setup
4.1 Introduction
Complete the following steps to install the Audio driver. Follow the procedures in the flow chart that
apply to the operating system that you are using within your MICA.
4.2 Installation of Audio Driver
Step 1-1 double click driver file and click next button for continue installation.
Step 1-2 Installation complete and press finish to restart the sustem.
29/ 41
MICA Tablet PC User’s Manual
Important
The following windows illustrations are examples only. You must follow the flow
chart instructions and pay attention to the instructions which appear on your
screen.
4.3 Further information
For further information about the Audio installation in your MICA, included Driver updates,
troubleshooting guides and FAQ lists please visit the following web resources.
Intel website: www. realtek.com
Advantech websites: www.advantech.com
30/ 41
MICA Tablet PC User’s Manual
Chapter 5 Touch screen Setup
5.1 Introduction
MICA support Dual-mode with pen and fingertip touch capabilities in a screen (touch input
prioritization: pen first and then finger touch). Enables more intuitive, natural input (pen and touch ) &
enjoyable user experience
5.2 Installation of Touch screen Driver
Step 1-1 double click driver file and click accept button of license agreement to continue installation.
Step 1-2 the installation complete and restart the system.
Important
The following windows illustrations are examples only. You must follow the flow
chart instructions and pay attention to the instructions which appear on your
screen.
5.3 Further information
31/ 41
MICA Tablet PC User’s Manual
For further information about the touch installation in your MICA, included Driver updates,
troubleshooting guides and FAQ lists please visit the following web resources.
Intel website: www. wacom.com
Advantech websites: www.advantech.com
32/ 41
MICA Tablet PC User’s Manual
Chapter 6 Ethernet Driver Installation
6.1 Installation of ethernet driver
Step 1-1 double click driver file and click next button to continue installation.
Step 1-2 click finish button to complete installation.
34/ 41
MICA Tablet PC User’s Manual
Important
The following windows illustrations are examples only. You must follow the flow
chart instructions and pay attention to the instructions which appear on your
screen.
5.3 Further information
For further information about the Audio installation in your MICA, included Driver updat es,
troubleshooting guides and FAQ lists please visit the following web resources.
Intel website: www. realtek.com
Advantech websites: www.advantech.com
35/ 41
MICA Tablet PC User’s Manual
Chapter 6 RFID driver installation
6.1 Introduction
MICA supports RFID reader function to help nurses identify patients and verify themselves as
authorized caregivers, as well as reducing prescription errors. Besides, active tag allows the MICA to
be tracked/managed as a medical asset at distances of one hundred feet or more, greatly improving the
utility of the device.
6.2 Installation of RFID Driver
Step 1-1 double click driver file and click next button to continue installation.
Step 1-2 select a destination folder by browse button. The default is C:\Program Files\RFID\USB
Driver. Click next button to continue installation.
37/ 41
MICA Tablet PC User’s Manual
Step 1-3 click finish button to complete the installation.
Important
The following windows illustrations are examples only. You must follow the flow
chart instructions and pay attention to the instructions which appear on your
screen.
6.3 Further information
For further information about the Audio installation in your MICA, included Driver updates,
troubleshooting guides and FAQ lists please visit the following web resources.
38/ 41
MICA Tablet PC User’s Manual
Intel website: www.mstar.com
Advantech websites: www.advantech.com
39/ 41
MICA Tablet PC User’s Manual
Chapter 7 WLAN Driver Installation
7.1 Introduction
MICA supports Mini PCI Express Wireless Module and complies with IEEE 802.11 a/b/g/n standard.
7.2 Installation of WLAN Driver
Step 1-1 double click driver file and click next button for continue installation.
Important
The following windows illustrations are examples only. You must follow the flow
chart instructions and pay attention to the instructions which appear on your
screen.
7.3 Further information
For further information about the Audio installation in your MICA, included Driver updates,
troubleshooting guides and FAQ lists please visit the following web resources.
Intel website: www.sparklan.com
Advantech websites: www.advantech.com
41/ 41
MICA Tablet PC User’s Manual

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2009:03:10 19:23:33Z
Modify Date                     : 2009:06:26 11:56:07+08:00
Producer                        : Acrobat PDFWriter 5.0Windows NT ª©
Creation Date                   : 2009:03:10 19:23:33Z
Mod Date                        : 2009:06:26 11:56:07+08:00
Author                          : Mike.Tsao
Metadata Date                   : 2009:06:26 11:56:07+08:00
Creator Tool                    : MICA Manual_update on 031009.doc - Microsoft Word
Document ID                     : uuid:2cad5388-4752-47d7-8191-7af700f780a6
Instance ID                     : uuid:bdc7b7fe-da68-422c-aeab-139291ee3f4f
Format                          : application/pdf
Title                           : MICA Manual_update on 031009.doc
Creator                         : Mike.Tsao
Has XFA                         : No
Page Count                      : 37

EXIF Metadata provided by EXIF.tools