Aerohive Networks AP650 Wireless Access Point User Manual

Aerohive Networks, Inc. Wireless Access Point AP650 V1 1

a href="https://usermanual.wiki/Aerohive-Networks" itemprop="url"> Aerohive Networks >

Contents

AP650-User Manual-V1.1

AP650 and AP650X Hardware User GuideRead about and view specifications and compliance information for the AP650 and AP650X in this topic. Install the AP650 and AP650X using thistopic.The AP650 and AP650X are high-performance, dual-band concurrent access points with one 11ax 4x4 2.4 G and one 11ax 4x4 5 G radio. The AP650 is designed for indoor high-density environments that require HD video streaming and large file transfers. These devices support IEEE 802.11ax Ortho-gonal Frequency-Division Multiple Access(OFDMA) multi-user access.For regulatory and compliance information, see "Regulatory Compliance Statements".Important! Change the Country CodeIf youraccess point is configured for the WorldRegulatory Domain, it is important to set the country code to the country in which the APwill bedeployed to meet regulatory requirements and for optimal wireless operation. To do this, follow these steps:The country code selection is for World models only and is not available to FCC, CAN, and other country-specific models. Per FCC reg-ulations, all Wi-Fi products marketed in the United States must be set to U.S. channels only.1. Power on the AP and allow it to find and connect to HiveManager. Once the APis connected it appears in the table of devices on the >Devices page.2. Select the check box next to the AP, and then choose Assign Country Code from the Actions drop-down list. In the dialog box thatappears, select the appropriate country from the drop-down list, and then click Save.3. Upload your changes to the device.Safety GuidelinesSafety GuidelinesThe safety information in this section applies to AP650 and AP650Xdevices.The following safety icons are used in these guidelines to identify the type of precaution:AP650 and AP650X Hardware User GuidePage 1
This icon indicates a general caution. Failure to comply with a caution notification can result in damage to equipment.This icon indicates an electrical caution. Failure to comply with an electrical notification can result in serious injury ordeath, and extensive damage to equipment.This icon indicates a laser caution. Failure to comply with a laser caution can result in serious injury.The following table lists the safety precautions you should follow when installing your AP650 devices.Aerohive devices must be installedby a professional installer who is certified to install these types of devices and toensure that they are properly grounded and meet applicable local and national electrical codes.These devices are intendedfor indoor use only.Do not install the device in an environment where the operating ambient temperature might exceed the recom-mended ranges.For products available in the USA/Canada market, for the 2.4 GHz band, only channels 1-11 can be operated. Selec-tion of other channels is not possible.Changes or modifications made to this device that are not expressly approved by the party responsible for com-pliance could void the user's authority to operate the equipment.Use only attachments and accessories specified by Aerohive.These devices are not intended for use by persons (including children) with reduced physical, sensory, or mental cap-abilities, or with lack of experience of knowledge unless they are given supervision or instruction concerning use of thedevices by a person who is responsible for their safety. Children should be supervised to ensure that they do not playwith the devices.Electrostatic discharge (ESD) can damage equipment and impair electrical circuitry. ESD damage occurs when elec-tronic components are improperly handled and can result in complete or intermittent failures. Be sure to follow ESD-pre-vention procedures when handling electronic components and equipment.During operation, the surfaces of the AP650 can become hot. Use caution when handling.To meet federal radiation exposure requirements, these devices should be installed at aminimum distance of 10" (25 cm) from people or animals.Install the AP650 and AP650XYou can mount the AP650 and AP650X on a flat surface or wall, or on the rails of a standard dropped ceiling grid. For square mounts, use the hardware on the back of the chassis. For diagonal mounts, use the mounting bracket that ships with the device.The following sections describe how to install your AP650 or AP650X devices and connect them to the network.Shipping Carton ContentsThe AP650 and AP650X shipping carton contains the following items:lAP650 or AP650X chassislMounting bracketlRead Me cardInstall the APon a Dropped Ceiling RailAP650 and AP650X Hardware User GuidePage 2
Download:
Mirror Download [FCC.gov]
Document ID3983741
Application IDroIhaEkG69YP0JeveLFVJQ==
Document DescriptionAP650-User Manual-V1.1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize81.35kB (1016821 bits)
Date Submitted2018-08-30 00:00:00
Date Available2018-08-30 00:00:00
Creation Date2018-07-13 09:24:21
Producing SoftwareMadCap Flare 12
Document Lastmod2018-08-24 09:57:32
Document TitleAP650-User Manual-V1.1
FCC ID Filing: WBV-AP650

Navigation menu