Airtech Information and Communication AQ-10 FM Handheld Transceiver (VHF) User Manual

Airtech Information & Communication Co., Ltd. FM Handheld Transceiver (VHF) AQ 10

a href="https://usermanual.wiki/Airtech-Information-and-Communication" itemprop="url"> Airtech Information and Communication >

Contents

User Manual

User’s Manual FM HANDHELD TRANSCEIVER Model: AQ-10
APPROVAL 1. FCC Approval FCC ID : 1) Safety Training Information Your FM Handheld Transceiver generates RF electromagnetic energy during transmit mode. This radio is designed for and classified as “Controlled Exposure / Occupation Environment”, meaning it must be used only during the course of employment by individuals aware of the hazards, and the ways to minimize such hazards. This radio is NOT intended for use by the “General Population / Uncontrolled Environment. This radio complies with FCC RF radiation exposure limits set forth for a controlled environment. This radio should be installed and operated with a minimum distance of 2.5 centimeters between the radio and your body. Therefore, to ensure that your exposure to RF electromagnetic energy is within the FCC allowable limits for occupational use, always follow below information. Do not operate the radio without a proper antenna as this may damage the radio and may also cause you to exceed FCC RF exposure limits. A proper antenna is the antenna supplied with this radio by the manufacturer or an antenna specifically authorized by the manufacturer for use with this radio. Do not transmit for more than 50% of total radio use time (“50% duty cycle”). Transmitting more than 50% of the time can cause FCC RF exposure compliance requirements to be exceeded. Always use Airtech supplied accessories (antennas, batteries, belt clips, speaker/mics, etc.). Use of unauthorized accessories can cause the FCC RF exposure compliance requirements to be exceeded. Always keep the antenna at least 2.5 cm (1 inch) away from the body when transmitting and only use the belt-clips, when attaching the radio to your belt, etc., to ensure FCC RF exposure compliance requirements are not exceeded. 2) LABEL This radio complies with the FCC RF exposurelimits for Occupational Use Only. 3
CONTENTS GENERAL FEATURES.................................................2 UNPACKING.................................................................3 OPTIONAL ACCESSORIES.........................................4 GETTING READY.........................................................4 DESCRIPTION..............................................................5 OPERATION.................................................................5 CHARGER AND BATTERY..........................................7 General Features 1. Compact design & size (125(W)x55(H)x40(D), 352.2g with high capable battery) 2. Heavy duty durable construction 3. 128 channels 4. 38 CTCSS/ 83 CDCSS/ 83 INVERR CDCSS 5. PC Programmable, transferable by cloning 6. Time-out timer (TOT) 7. Busy Lockout (BCLO) 8. Battery saving mode 9. Low battery alert 10. DTMF ANI 11. Transmit output power High/Low DC 7.5V Ni-Mh battery 21
Download:
Mirror Download [FCC.gov]
Document ID500458
Application IDuHI8dA/cS8TqiTXPxZ0Rrg==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize9.32kB (116464 bits)
Date Submitted2004-12-23 00:00:00
Date Available2005-02-24 00:00:00
Creation Date2004-12-13 13:39:58
Producing SoftwareAcrobat Distiller 6.0 (Windows)
Document Lastmod2004-12-21 13:08:00
Document TitleMicrosoft Word - AQ-10 user manual.doc
Document CreatorPScript5.dll Version 5.2
Document Author: user
FCC ID Filing: ONKAQ-10

Navigation menu