Alcatel USA 8502-8 Digital Modulated Radio User Manual 588119

Download:
Mirror Download [FCC.gov]
Document ID	588119
Application ID	GDpYyRKMWiBdybx/l0P/MA==
Document Description	MDR8000 Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Microsoft Word - pdf
Filesize	29.7kB (371201 bits)
Date Submitted	2005-10-03 00:00:00
Date Available	2005-11-18 00:00:00
Creation Date	2005-10-04 07:13:56
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2005-10-04 07:13:56
Document Title	Microsoft Word - 588119.DOC
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

EXHIBIT 6.
USER’S MANUAL
The MDR-8000 series Microwave Digital Radios (see Figure ) consists of:
• Solid-state, licensed, digital radios that provide transport for DS1 and E1 in 1.85, 2, 6,
7, 8, 10, and 11 GHz RF bands, DS3 in 2, 6, 7, 8, and 11 GHz RF bands, and OC3 in 6,
7, 8, and 11 GHz RF bands
• Solid-state, unlicensed digital radios that provide transport for DS1 and DS3 in the 5
GHz RF frequency band.
The following capacities and modulation schemes are available:
• MDR-8000 – 2, 4, 8, 12, or 16 North American Standard DS1 channels at either 32 or
128 TCM or 1, 2, or 3 North American Standard DS3 channels with 1, 2, or 3 wayside
DS1 channels at 64 QAM
• MDR-8000i – 2, 4, 8, 12, or 16 CCITT E1 channels at either 32 or 128 TCM
• MDR-8000u – 2, 4, 8, or 16 North American Standard DS1 channels at 32 TCM.
SHELF CONFIGURATIONS
The MDR-8000 is available in two shelf configurations: hot-standby and CommPak.
HOT STANDBY SHELF
The MDR-8000 hot-standby shelf is wired hot-standby and can be configured nonstandby, where only the A-side is populated, or hot-standby, where both the A- and the Bsides are populated. The hot-standby shelf fits into a standard 19 in. (483 mm) rack and
occupies seven vertical rack increments. Up to four fully equipped hot-standby radios can
be mounted in a standard 7 ft. rack. The radio is front accessible and can be mounted
against a wall or back-to-back against other equipment.
COMMPAK RADIO
The MDR-8000 CommPak radio is available as a full indoor shelf or outdoor unit in a
cabinet.
COMMPAK INDOOR SHELF
The CommPak indoor shelf is wired and configured non-standby only. The indoor shelf
fits into a standard 19 in. (483 mm) rack and occupies four vertical rack increments (7
in.). The radio is front accessible and can be mounted against a wall or back-to-back
against other equipment.
COMMPAK OUTDOOR UNIT
The MDR-8000 outdoor unit consists of the CommPak indoor shelf mounted vertically in a
20 in. high x 7.5 in. wide x 12.5 in. deep enclosure.
STANDARD FEATURES
Standard features include:
• Frequency bands from 1.85 to 11 GHz
• Committee of European Post and Telegraph (CEPT)/Federal Communications
Commission (FCC) applications
• DS1, E1, DS3, and OC3 Traffic capacities
• International Telecommunications Union (ITU)/ETSI/FCC compliant
• Five configuration options
• Upstream management compatibility.
• User-friendly Personal Computer (PC) monitor and control
• Automatic Transmitter Power Control (ATPC)
• Adaptive Time Domain Equalization (TDE)
• Extended Link Monitor Channel (ELMC)
• MCS-11/Telemetry Byte Oriented Serial (TBOS) Alarm/Control Interface
• Two independent PCM audio channels
Figure 1
Typical MDR-8000 Series Microwave Digital Radio
Table
Physical, Environmental, and Electrical Characteristics
ITEM
CHARACTERISTICS
PHYSICAL CHARACTERISTICS
Dimensions
WIDTH
Hot-Standby Shelf
483 mm (19 in.)
CommPak Indoor
483 mm (19 in.)
Shelf
Weight
DEPTH
HEIGHT
406.4 mm (16.25
311.15 mm (12.25
in.)
in.)
406.4 mm (16.25
177.8 mm (7.0 in.)
in.)
(Hot-Standby Terminal)38.6 kg (85 lbs)
ENVIRONMENTAL CHARACTERISTICS
Ambient Temperature
Spec Compliant
32° to 122°F (0° to 50°C)
Operating Without Failure
- 4° to 158°F (- 20° to 70°C)
Nonoperating
- 40° to 176°F (- 40° to 80°C)
Altitude
Operating
-350 to 16500 ft (-100 to 5000 m)
Nonoperating
-350 to 40000 ft (-100 to 12000 m)
Relative Humidity
5 to 95 percent (without condensation)
Vibration and Shock
Normal Storage and Handling
Duty Cycle
Continuous, unattended
COMMON ELECTRICAL CHARACTERISTICS
Primary Input Voltage
±20.5 to ±60.0 Vdc
RF CHANNEL FREQUENCY (MHZ)
MDR-8X02/i-X
1850-2285
MDR-8X05u-X
5725-5850
MDR-8X06/i/s-X
5850-7125
MDR-8X07/i/s-X
7125-7750
MDR-8X08/i/s-X
7700-8500
MDR-8X10/i/s-X
10440-10680
MDR-8X11/i/s-X
10700-11700
XMT OUTPUT POWER (DBM, NOMINAL)
XMTR (NO PA)
OPTIONAL PA
INSTALLED
MDR-8X02/i-X
+14
+30 or +33
MDR-8505u-X
+15
+25 or +30
MDR-8605u-X
+14
+23 or +29
MDR-8X06/i/s-X
+14
+23 or +29 or +31
MDR-8X07/i/s-X
+14
or +33
MDR-8X08/i/s-X
+14
+28 or +30
MDR-8X10/i/s-X
+15
+28 or +30 or +32
MDR-8X11/i/s-X
+15
+23 or +27 or +29
+23 or +27 or +29
Note: XMT Power
Referenced at the SMA output of the diplexer filter or the
top of the stack for waveguide stacking configurations.
Figure 1. Typical MDR-8000 Hot-Standby Shelf Component

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2005:10:04 07:13:56-04:00
Modify Date                     : 2005:10:04 07:13:56-04:00
Page Count                      : 6
Creation Date                   : 2005:10:04 11:13:56Z
Mod Date                        : 2005:10:04 11:13:56Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : Administrator
Metadata Date                   : 2005:10:04 11:13:56Z
Creator                         : Administrator
Title                           : Microsoft Word - 588119.DOC

EXIF Metadata provided by EXIF.tools