Alcatel USA 8505U-4 Digitally Modulated Radio User Manual 01 General
Alcatel USA Marketing, Inc. Digitally Modulated Radio 01 General
Contents
- 1. GENERAL
- 2. INITIAL TURNUP
GENERAL
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 255505 |
| Application ID | VEv9siEZlyycxP3kDToA7g== |
| Document Description | GENERAL |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 59.8kB (747492 bits) |
| Date Submitted | 2002-07-10 00:00:00 |
| Date Available | 2002-10-03 00:00:00 |
| Creation Date | 2002-07-10 15:47:23 |
| Producing Software | Acrobat Distiller 5.00 for Macintosh |
| Document Lastmod | 2002-07-10 11:25:26 |
| Document Title | 01-General.fm |
| Document Creator | FrameMaker 6.0: LaserWriter 8 8.7.1 |
| Document Author: | Carol |
3DH03220 Issue 6, April 2002 MDR-8000 Series Radios section 1 general List of Paragraphs Page 1.1 INTRODUCTION...................................................................................... 1-3 1.2 STANDARD FEATURES ............................................................................. 1-3 1.3 NAMING CONVENTION ........................................................................ 1-5 1.4 ORDERING INFORMATION...................................................................... 1-6 1.5 SYSTEM CONFIGURATIONS .................................................................... 1-6 1.6 RADIO CONFIGURATIONS ...................................................................... 1-6 1.6.1 Basic Configurations................................................................................. 1-6 1.6.2 Ring ....................................................................................................... 1-7 1.6.3 Space Diversity Add-On............................................................................ 1-7 1.6.4 Optical 2 X 4 Configuration ...................................................................... 1-7 1.7 FEATURES AND OPTIONS........................................................................ 1-7 1.7.1 Primary Power ......................................................................................... 1-7 1.7.2 Transmit Power Level Options .................................................................... 1-7 1.7.3 Differential Absolute Delay Equalization (DADE) .......................................... 1-7 1.7.4 Trellis Encoding and Time Domain Equalization (TDE)................................... 1-7 1.7.5 MCS-11 Alarm/Control Interface ............................................................... 1-7 1.7.6 Foreign Alarm Interface............................................................................. 1-8 1.7.7 Relay Interface Option .............................................................................. 1-8 1.7.8 Extended Link Monitor Channel.................................................................. 1-8 1.7.9 Automatic Transmitter Power Control Provisioning Option.............................. 1-8 1.7.10 Service Channels Provisioning Options ....................................................... 1-8 1.7.11 Mechanical Options ............................................................................... 1-10 1.7.12 Capacity upgrade .................................................................................. 1-12 1.7.13 Bandwidth upgrade................................................................................ 1-12 1.8 USER SYSTEM INTERFACE (USI) .............................................................. 1-12 1.8.1 System Security ...................................................................................... 1-12 1.9 RADIO CHARACTERISTICS...................................................................... 1-13 1-1 3DH03220 Issue 6, April 2002 MDR-8000 Series Radios Page 1.10 EXTERNAL INTERFACE REQUIREMENTS ................................................... 1-32 1.11 EQUIPMENT LISTING ............................................................................. 1-35 1.11.1 Diplexer Filter Kits .................................................................................. 1-45 1.11.2 Standard Filter Kits ................................................................................. 1-45 1.11.3 Cable Drop Kit Option............................................................................ 1-45 1.12 FAN ASSEMBLY..................................................................................... 1-45 1.13 HANDSET KIT........................................................................................ 1-47 List of Tables Table 1-1 Rack Options......................................................................................... 1-11 Table 1-2 Software ............................................................................................... 1-13 Table 1-3 Guidelines............................................................................................. 1-13 Table 1-4 Physical, Environmental, and Electrical Characteristics ................................ 1-14 Table 1-5 OSS External Interface Requirements ........................................................ 1-32 Table 1-6 MDR-8000/i/s Common Shelf Assembly .................................................. 1-35 Table 1-7 Supplied and Optional Equipment............................................................ 1-38 Table 1-8 I/O Interface Options ............................................................................. 1-40 Table 1-9 XMTR Options ....................................................................................... 1-41 Table 1-10 PA Options............................................................................................ 1-42 Table 1-11 RCVR Options........................................................................................ 1-43 Table 1-12 Capacity Keys for Transmitter and Receiver Modules .................................. 1-44 Table 1-13 LBO Options.......................................................................................... 1-45 List of Figures Figure 1-1 Typical MDR-8000/i/s/u Series Microwave Digital Radio ............................ 1-4 Figure 1-2 Typical MDR-8000/i/s/u Component Locations and Options ...................... 1-36 Figure 1-3 MDR-8000/i/s Component Locations, Rear View....................................... 1-37 Figure 1-4 Fan Assembly ........................................................................................ 1-46 Table 1-14 Fan Assembly/Lap Top Tray Options ........................................................ 1-46 Figure 1-5 Fan Assembly With Laptop Tray Fully Extended.......................................... 1-47 Figure 1-6 Handset Kit ........................................................................................... 1-48 1-2 3DH03220 Issue 6, July 2002 GENERAL 1.1 INTRODUCTION MDR-8000 Series Radios General The MDR-8000/i/s/u series Microwave Digital Radios (see Figure 1-1) consists of: • Solid-state, licensed, digital radios that provide transport for DS1, E1, and DS3 in 2, 6, 7, 8, 10, and 11 GHz RF frequency bands and OC3 in 6, 7, 8, 10, and 11 GHz RF frequency bands • Solid-state, unlicensed digital radios that provide transport for DS1 and DS3 in the 5 GHz RF frequency band. The following capacities and modulation schemes are available: • MDR-8000 – 2, 4, 8, 12, or 16 North American Standard DS1 channels at either 32 or 128 TCM or 1 or 3 North American Standard DS3 channels with 1 or 3 wayside DS1 channels at 64 QAM • MDR-8000i – 2, 4, 8, 12, or 16 CCITT E1 channels at either 32 or 128 TCM • MDR-8000s – 3 North American Standard STS1 channels with 3 wayside DS1 channels at 128 TCM • MDR-8000u – 2, 4, 8, or 16 North American Standard DS1 channels at 32 TCM or 1 North American Standard DS3 channel with 1 wayside DS1 channel at 16 or 64 QAM. The radio fits into a standard 19 in. (483 mm) rack and occupies seven vertical rack increments. Up to four fully-equipped hot-standby radios can be mounted in a standard 7 ft. rack. The radio is front accessible and can be mounted against a wall or back-to-back against other equipment. 1.2 STANDARD FEATURES Standard features include: • Frequency bands from 2 to 11 GHz • Committee of European Post and Telegraph (CEPT)/Federal Communications Commission (FCC) applications • DS1, E1, DS3, and OC3 Traffic capacities. • International Telecommunications Union (ITU)/ETSI/FCC compliant • Five configuration options • Upstream management compatibility 1-3 MDR-8000 Series Radios General 3DH03220 Issue 6, July 2002 • User-friendly Personal Computer (PC) monitor and control • Automatic Transmitter Power Control (ATPC) • Adaptive Time Domain Equalization (TDE) • Extended Link Monitor Channel (ELMC) • MCS-11/Telemetry Byte Oriented Serial (TBOS) Alarm/Control Interface • Two independent PCM audio channels Figure 1-1 Typical MDR-8000/i/s/u Series Microwave Digital Radio 1-4 3DH03220 Issue 6, July 2002 1.3 MDR-8000 Series Radios General NAMING CONVENTION The MDR-8000/i/s/u series radio naming conventions are as follows: MDR-8XXXi/s-XXX LINE CAPACITY: 2 12 16 45 135 155 2 DS1/E1s 4 DS1/E1s 8 DS1/E1s 12 DS1/E1s 16 DS1/E1s 1 DS3 3 DS3 3 STS1 i = INTERNATIONAL DATA RATE s = SONET u = UNLICENSED FREQUENCY BAND: 02 05 06 07 08 10 11 MODEM OPTION: 4 GENERATION 2 GHz 5 GHz 6 GHz 7 GHz 8 GHz 10 GHz 11 GHz 16 QAM 32 TCM 64 QAM 128 TCM LMW-3121 07/07/02 1-5 MDR-8000 Series Radios General 1.4 3DH03220 Issue 6, July 2002 ORDERING INFORMATION The radio is shipped as a complete unit; therefore, ordering information must specify the following: • 1.5 System capacity: • 2, 4, 8, 12, or 16 DS1 • 2, 4, 8, 12, or 16 E1 • 1 or 3 DS3 with/without wayside DS1 • OC3 with/without wayside DS1 • System configuration: non-standby, non-standby/space diversity, hot-standby, hotstandby/space diversity, frequency diversity • Transmit and receive frequency • Transmit power level • Fault alarm requirements • Service channel requirements • DS1/E1 interface connector requirements • Alarm interface connector requirements SYSTEM CONFIGURATIONS The MDR-8000/i/s radio can be provisioned as a terminal, synchronous repeater, ring terminal, or ring repeater. 1.6 RADIO CONFIGURATIONS 1.6.1 Basic Configurations The MDR-8000/i/s/u supports the three basic configurations: 1-6 • Non-standby – available in all frequency bands – stand alone transmitter/receiver combination • Hot-standby – available in all frequency bands except 5 GHz (unlicensed) – pair of transmitters and receivers, both pairs operating on the same set of go and return frequencies. • Frequency diversity – available in all frequency bands except 2 GHz and 5 GHz (unlicensed) – pair of transmitters and receivers, each pair operating on a different set of go and return frequencies. 3DH03220 Issue 6, July 2002 1.6.2 MDR-8000 Series Radios General Ring Non-standby radios are typically used in ring systems where the radios are protected by the ring architecture. 1.6.3 Space Diversity Add-On Space diversity can be added to any of the three basic configurations and ring systems. 1.6.4 Optical 2 X 4 Configuration Hot-standby and frequency diversity configuration are available with 2-fiber or 4-fiber optical interfaces. 1.7 FEATURES AND OPTIONS Features and options for the MDR-8000/i/s/u series of microwave digital radios are described in the following paragraphs. 1.7.1 Primary Power The MDR-8000/i/s/u series radios operate from 20.5 to 60 V dc primary power with positive or negative ground. 1.7.2 Transmit Power Level Options The standard radio is provided without a power amplifier (PA) module for low-power applications. The optional PA module is available for high-power requirements. There are different levels for the different frequency bands. Refer to the electrical characteristics table in this section for specific levels. 1.7.3 Differential Absolute Delay Equalization (DADE) DADEing adjusts the differential absolute delay between the main and diversity signals in a space diversity configuration. DADEing is an automatic function within the DS1/E1 and OC3 MDR-8000/i/s/u receivers, reducing the time required for initial turn-up and test. 1.7.4 Trellis Encoding and Time Domain Equalization (TDE) Trellis encoding (DS1/E1/OC3) ensures that even with the most severe multipath, only the correct digital data is demodulated. TDE further reduces the disruptive effects of multipath distortion. 1.7.5 MCS-11 Alarm/Control Interface MCS-11 is standard in the MDR-8000. The MDR-8000 can interface with any alarm system that is based on the MCS-11 protocol. Use with the TSM-2500 network management system to develop a central access point to monitor and control the transmission system 1-7 MDR-8000 Series Radios General 1.7.6 3DH03220 Issue 6, July 2002 Foreign Alarm Interface This provisioning option provides serial alarm/status reporting for the Telemetry Byte Oriented Serial (TBOS) protocol. A wire-wrap adapter is provided to mate to connector J305 on the backplane. 1.7.7 Relay Interface Option The optional AE-27AF Relay Interface unit provides relay closure indications of radio alarms and status. The relay interface also provides up to 16 station alarm inputs and six relay closure control outputs. 1.7.8 Extended Link Monitor Channel ELMC is standard and performance monitoring, alarm and status information, and remote controls are accessible through the ELMC channel, independent of network management interfaces. Optional remote provisioning and downloading capability is provided via an ELMC option key that is mounted on the controller module. 1.7.9 Automatic Transmitter Power Control Provisioning Option Automatic Transmitter Power Control (ATPC) is a standard feature that can be enabled or disabled using the USI provisioning screens. When ATPC is disabled, transmitter power is fixed at the recommended maximum level. When ATPC is enabled, transmitter power may be reduced up to 10 dB from the maximum power level when the far end RSL is above a minimum level. When ATPC is enabled with timeout, transmitter ATPC activity is limited to a maximum time without returning to minimum transmit power. After five minutes of activity, the transmit power is forced to minimum until the far end RSL returns to normal levels. 1.7.10 Service Channels Provisioning Options The MDR-8000 provides a 256 kb/s auxiliary channel for servicing the radio. This is an overhead channel and is independent of the traffic channels. The 256 kb/s service channel contains four 64 kb/s service channels. Three of the four 64 kb/s channels (Service Channel 1, 2, and 3) can be provisioned on the USI for a specific use. Service channel 4 is dedicated to radio commands and ELMC. Service channel 4 is not provisionable. Only 16 kb/s out of the 64 kb/ s in this channel are used. Note Service channels at both ends of a hop (and end-to-end in a link) must be provisioned the same. 1-8 3DH03220 Issue 6, July 2002 MDR-8000 Series Radios General Service channel provisioning is interactive. When an option is selected for any service channel, that option is excluded from selections on the other applicable service channels. Provisioning options for Service Channels 1, 2, and 3 are listed: • • • Service Channel 1 (64 kb/s channel) – can be used to carry 4-wire audio, RS232 data, or MCS-11 fault alarm information. • AUDIO 1 and 2 – Two audio provisioning options (AUDIO 1 and AUDIO 2) are provided for Service Channel 1. Each audio channel is a 4-wire audio channel that provides off-hook detection, level control, and E and M-lead signaling. AUDIO 1 also has DTMF decoding that allows a specific station to be dialed. External connection to AUDIO 1 is J316. External connection to AUDIO 2 is J317. • RS232 1 – RS232 Channel 1 is an RS232 formatted data channel that can provide interface to an external computer/modem. External connection to RS232-1 is J312. • MCS-11 – The MCS-11 channel is an RS422 formatted data that provides an interface to an external MCS-11 Monitor Control System or TSM system, used to control multiple MCS-11 systems. External connections to the MCS-11 include J307, J308, J309 and J310. Service channel 2 (64 kb/s channel) - can be used to carry 4-wire audio, RS232 data, or MCS-11 fault alarm information. • AUDIO-1 and -2 – Same as Service Channel 1 • RS232-2 – RS232 Channel 2 is an RS232 formatted data channel that can provide interface to an external computer/modem. External connection to RS232-1 is J313. • MCS-11 – Same as Service Channel 1. Service Channel 3 (64 kb/s channel) - can be used to carry 4-wire audio, or MCS11 fault alarm information. • AUDIO 1 and 2 – Same as Service Channel 1 • MCS-11 – Same as Service Channel 1. 1-9 MDR-8000 Series Radios General 1.7.11 3DH03220 Issue 6, July 2002 Mechanical Options Mechanical options include: • Racks. Refer to Table 1-1 for characteristics. • Shelf covers - One front cover is provided. • Rack extension kit PN 690-1125-001 through 005 - Extends 7-ft racks PN 690-1124-XXX and 694-9000-XXX to any height from 7 ft 3-1/2 in. to 11 ft 6 in. The purpose of the extensions is to provide top support mounting above the 7-ft level. • Adjacent rack attachment (without/with rack extension) kit PN 6949004-001/002 – Provides hardware for bolting two rack assemblies (PN 694-9000-XXX) together. The -001 kit is used to tie two racks together that do not have the optional rack extension kit (PN 690-1125-003) installed. Kit -002 is used when the two racks have the optional rack extension kit. Note Guardrails and AC outlets are field installed and are sent in shipper kits. 1-10 • Guardrail kit PN 690-4367-005 through -008 - Protects front only (PN 690-4367-007), front and rear (PN 690-4367-008), or sides (690-4367-005 and -006) of all configurations of rack PN 690-1124-XXX. • AC outlet kit PN 690-4373-001 - Provides hardware for mounting ac outlet to the guardrail (PN 690-4367-XXX). • Optical Fiber Management Panel (OC3 only). Optical fiber management panels are available for 2 or 4 fiber and for 2- or 4-fiber switched configurations. Each optical fiber management panel supports two MDR-8000s radio shelves. The 2- or 4-fiber switched optical fiber management panel (PN 3EM09257AA) is used with splitter/combiners to support 2 or 4 fiber switched applications using multimode or single mode fibers. For nonswitched applications, the 2 or 4 fiber optical fiber management panel (PN 3EM09257AB) is used to support 2 or 4 fiber configurations. 3DH03220 Issue 6, July 2002 MDR-8000 Series Radios General Table 1-1 Rack Options PART NO. DESCRIPTION RACK TYPE 694-9000-001 19-in. wide by 7-ft. high aluminum rack, no top support bar, Standard no side covers 694-9000-002 19-in. wide by 7-ft. high aluminum rack with top support bar Standard (694-9001-002), no side covers 694-9000-003 19 in. wide by 6-ft high aluminum rack with top support bar Standard (694-9001-001), no side covers 019-0429-010 19-in. wide by 7-ft. high steel rack Seismic * 019-0429-020 19-in. wide by 9-ft. high steel rack Seismic * 019-0429-030 19-in. wide by11-ft. 6-in high steel rack Seismic * 019-0429-040 19-in wide by 11-ft. 8-in high steel rack Seismic * 019-0429-080 19 in.wide by 7-ft. 6-in high steel rack Seismic * 019-0429-090 19 in wide by 8-ft. high steel rack Seismic * 695-0905-002 23-in. wide by 7-ft. high aluminum rack, no top support bar, Standard no side covers 694-8873-001 MDR-8000 shelf mounting bracket extender (for mounting 19-in. shelf in 23-in. rack) 694-8873-005 PDU mounting bracket extender (for mounting 19-in. PDU in 23-in. rack) 690-1125-003 Aluminum rack extension (extends height of 7-ft aluminum rack) 694-9004-001 Adjacent rack attachment (without rack extension 690-1125-003) 694-9004-002 Adjacent rack attachment (with rack extension 690-1125-003) 690-4367-005 Short side guard rail 690-4367-006 Long side guard rail 690-4367-007 Guard rail (front only) 690-4367-008 Guard rail (front and rear) 690-4373-001 AC outlet * Seismic racks require Seismic Accessory Kit PN 695-1001-001 1-11 MDR-8000 Series Radios General 1.7.12 3DH03220 Issue 6, July 2002 Capacity upgrade The number of maximum DS1/E1 lines can be changed to any number between 1 and 16 to meet expanding system needs. DS3 lines can be expanded from 1 to 3. The number of available DS1/E1/DS3 lines is determined by printed circuit boards (capacity keys). Identical capacity keys plug onto the transmitter and receiver modules. Changing the number of DS1/E1/ DS3 lines requires changing capacity keys. DS1 to DS1 and/or DS3 to DS3 capacity upgrades can be performed in-service on protected systems without traffic interruption. In non-protected radios, traffic will be interrupted for the duration of the procedure. 1.7.13 Bandwidth upgrade Assuming no frequency or band change, DS1 to DS3 conversion can be accomplished by changing out the I/O interface modules, LBO board, and capacity keys and installing DS3 software. Electrical DS3 to optical OC3 conversion can be accomplished by changing out the I/O interface modules, exchanging the LBO board with the auxiliary board, and changing capacity keys and installing OC3 software. Changing out the LBO or AUX board requires interrupting traffic for the duration of the procedure. 1.8 USER SYSTEM INTERFACE (USI) A personal computer (PC) is required to access provisioning, status and alarm information, and maintenance control functions (on-line maintenance and troubleshooting) within the radio. The PC is not supplied with the radio and must be provided by the user. These functions are performed via the Alcatel USI maintenance program software (Table 1-2). The PC must be IBM compatible. PC guidelines are addressed in Table 1-3. Note The USI runs on Windows 95®, 98®, NT®‚ or 2000®‚ 1.8.1 System Security Password options ensure that only authorized users have access to USI provisioning screens. The level of security provided by the system depends on how thoroughly the security system scheme is implemented and maintained by the system administrator. 1-12 3DH03220 Issue 6, July 2002 MDR-8000 Series Radios General Table 1-2 Software CD ROM PART NUMBER DS1/E1 695-9406-021 DS3 695-9406-022 OC3 695-9406-023 Table 1-3 PC Guidelines 1.9 ITEM MINIMUM REQUIREMENTS CPU Pentium Speed 100 MHz or greater RAM 32 Mbytes, minimum Graphics VGA Display Color Hard Disk Required Free Disk Space 100 Mbytes CD ROM Drive Required Mouse Optional Operating System Windows 95, 98, NT, or 2000 Serial Port 2400 b/s RADIO CHARACTERISTICS Refer to Table 1-4 for the physical, environmental, and electrical characteristics of the MDR-8000/i/s/u series radio. 1-13 MDR-8000 Series Radios General 3DH03220 Issue 6, July 2002 Table 1-4 Physical, Environmental, and Electrical Characteristics ITEM CHARACTERISTICS PHYSICAL CHARACTERISTICS Dimensions WIDTH 483 mm (19 in.) Weight DEPTH 406.4 mm (16.25 in.) HEIGHT 311.15 mm (12.25 in.) (Hot-Standby Terminal)38.6 kg (85 lbs) ENVIRONMENTAL CHARACTERISTICS Ambient Temperature Spec Compliant 32° to 122°F (- 0° to 50°C) Operational - 30° to 70°F (- 34° to 50°C) Nonoperating - 40° to 176°F (- 40° to 80°C) Altitude Operating -350 to 16500 ft (-100 to 5000 m) Nonoperating -350 to 40000 ft (-100 to 12000 m) Relative Humidity 5 to 95 percent (without condensation) Vibration and Shock Normal Storage and Handling Duty Cycle Continuous, unattended COMMON ELECTRICAL CHARACTERISTICS Primary Input Voltage 24 V dc Battery 48 V dc Battery Positive or Negative Ground ±20.5 to ±28.0 V dc ±41.5 to ±56.0 V dc RF CHANNEL FREQUENCY (MHZ) MDR-8X02/i-X 2025-2285 MDR-8X05u-X 5725-5850 MDR-8X06/i/s-X 5850-7125 MDR-8X07/i/s-X 7125-7750 MDR-8X08/i/s-X 7700-8500 MDR-8X10/i/s-X 10440-10680 MDR-8X11/i/s-X 10700-11700 XMT OUTPUT POWER (DBM, NOMINAL) XMTR (NO PA) OPTIONAL PA INSTALLED MDR-8X02/i-X +14 +33 MDR-8X05u-X +15 +25 or +30 MDR-8X06/i/s-X +14 +23 or +29 or +31 MDR-8X07/i/s-X +14 +28 or +30 MDR-8X08/i/s-X +14 +28 or +30 MDR-8X10/i/s-X +15 +23 or +27 or +29 MDR-8X11/i/s-X +15 +23 or +27 or +29 Note: XMT Power – Referenced at the SMA output of the diplexer filter or the top of the stack for waveguide stacking configurations. 1-14 3DH03220 Issue 6, July 2002 MDR-8000 Series Radios General Table 1-4 (Cont.) Physical, Environmental, and Electrical Characteristics ITEM CHARACTERISTICS DS1 RADIO ELECTRICAL CHARACTERISTICS Power Consumption NO PA WITH PA MDR-8502-16 Non-Standby +14 dBm XMT Power 69 W +33 dBm XMT Power 68 W (With Fan Assy) Hot-Standby +14 dBm XMT Power 138 W +33 dBm XMT Power 288 W (With Fan Assy) MDR-8X05u-16 Non-Standby +14 dBm XMT Power 69 W +29 dBm XMT Power 126 W (With Fan Assy) MDR-8706-16 Non-Standby +14 dBm XMT Power 69 W +23 dBm XMT Power 94 W +29 dBm XMT Power 126 W +31 dBm XMT Power 165 W (With Fan Assy) Hot-Standby +14 dBm XMT Power 126 W +23 dBm XMT Power 169 W +29 dBm XMT Power 226 W +31 dBm XMT Power 286 W (With Fan Assy) Frequency Diversity +14 dBm XMT Power 126 W +23 dBm XMT Power 175 W +29 dBm XMT Power 240 W +31 dBm XMT Power 307 W (With Fan Assy) 1-15 MDR-8000 Series Radios General 3DH03220 Issue 6, July 2002 Table 1-4 (Cont.) Physical, Environmental, and Electrical Characteristics ITEM CHARACTERISTICS MDR-8708-16 Non-Standby +14 dBm XMT Power 69 W +28 dBm XMT Power 126 W +30 dBm XMT Power 165 W (With Fan Assy) Hot-Standby +14 dBm XMT Power 126 W +28 dBm XMT Power 226 W +30 dBm XMT Power 286 W (With Fan Assy) Frequency Diversity +14 dBm XMT Power 126 W +28 dBm XMT Power 240 W +30 dBm XMT Power 307 W (With Fan Assy) MDR-8710/11-16 Non-Standby +15 dBm XMT Power 71 W +23 dBm XMT Power 126 W +27 dBm XMT Power 162 W (With Fan Assy) +29 dBm XMT Power 180 W (With Fan Assy) Hot-Standby +15 dBm XMT Power 130 W +23 dBm XMT Power 226 W +27 dBm XMT Power 280 W (With Fan Assy) +29 dBm XMT Power 311 W (With Fan Assy) Frequency Diversity +15 dBm XMT Power 130 W +23 dBm XMT Power 240 W +27 dBm XMT Power 300 W (With Fan Assy) +29 dBm XMT Power 336 W (With Fan Assy) CAPACITY (MB/S, NOMINAL) MDR-8XXXX-2 2 X 1.544 MDR-8XXXX-4 4 X 1.544 MDR-8XXXX-8 8 X 1.544 MDR-8XXXX-12 12 X 1.544 MDR-8XXXX-16 16 X 1.544 1-16 3DH03220 Issue 6, July 2002 MDR-8000 Series Radios General Table 1-4 (Cont.) Physical, Environmental, and Electrical Characteristics ITEM CHARACTERISTICS MODULATION MDR-85XX-X 32 TCM MDR-87XX-X 128 TCM BAUD RATE (MB/S, ±0.003%) MDR-85XX MDR-87XX -2 0.7726 0.5349 -4 1.4594 1.0104 -8 2.9189 0.5349 -12 4.3783 3.0311 -16 5.8378 4.3783 MINIMUM RF CHANNEL BANDWIDTH (99% POWER) (MHZ) MDR-85XX MDR-87XX -2 1.25 0.80 -4 2.50 1.25 -8 3.75 2.50 -12 5.25 3.75 -16 7.00 5.00 Frequency Stability ±0.001% Receiver Noise Figure (measured at the filter input of a space-diversity radio) Not More Than 5 dB Max RSL (1 X 10-6 BER) (measured at the filter input of a space-diversity radio) -10 dBm Background BER Less Than 1 X 10-11 for RSL at least 5 dB above 1 X 10-6 threshold RADIO TYPE TYPICAL RCVR THRESHOLD (DBM) BER=10-6 TYPICAL DISPERSIVE FADE MARGIN (DB) BER=10-3 MDR-8502-2 -88.0 78 MDR-8502-4 -86.0 74 MDR-8502-8 -83.0 65 MDR-8502-12 -81.0 62 MDR-8502-16 -80.0 60 MDR-8505u-2 -89 TBD MDR-8505u-4 -86 TBD MDR-8505u-8 -83 TBD MDR-8505u-16 -80 TBD 1-17 MDR-8000 Series Radios General 3DH03220 Issue 6, July 2002 Table 1-4 (Cont.) Physical, Environmental, and Electrical Characteristics ITEM CHARACTERISTICS MDR-8506-2 -89.0 78 MDR-8506-4 -86.0 74 MDR-8506-8 -83.0 65 MDR-8506-12 -81.0 62 MDR-8506-16 -80.0 60 MDR-8508-2 -87.0 78 MDR-8508-4 -84.0 74 MDR-8508-8 -81.0 65 MDR-8508-12 -79.0 62 MDR-8508-16 -78.0 60 MDR-8510-2 -86.0 78 MDR-8510-4 -83.0 74 MDR-8510-8 -80.0 65 MDR-8510-12 -78.0 62 MDR-8510-16 -77.0 60 MDR-8511-2 -86.0 78 MDR-8511-4 83.0 74 MDR-8511-8 -80.0 65 MDR-8511-12 -78.0 62 MDR-8511-16 -77.0 60 MDR-8706-2 -85.0 81 MDR-8706-4 -82.0 76 MDR-8706-8 -79.0 68 MDR-8706-12 -77.0 65 MDR-8706-16 -76.0 63 MDR-8710-2 -82.0 81 MDR-8710-4 -79.0 77 MDR-8710-8 -76.0 68 MDR-8710-12 -74.0 65 MDR-8710-16 73.0 63 1-18 3DH03220 Issue 6, July 2002 MDR-8000 Series Radios General Table 1-4 (Cont.) Physical, Environmental, and Electrical Characteristics ITEM CHARACTERISTICS MDR-8711-2 -82.0 81 MDR-8711-4 -79.0 77 MDR-8711-8 -76.0 68 MDR-8711-12 -74.0 65 MDR-8711-16 -73.0 63 Notes: 1. The typical RCVR thresholds listed above are for non-standby or hot-standby with space diversity configurations. For hot-standby configurations, deduct 1 dB for the A side and 10 dB for the B side. 2. RCVR thresholds and dispersive fade margins are typical values. Guaranteed values are 2 dB worse. 3. For RCVR thresholds in the FCC Part 74 Broadcast Auxiliary Band from 6.875 to 7.125 GHz, deduct an additional 0.5 dB. Receiver DADE Automatic, range Not Less Than ±300 ns DS1 Interface Requirements Line Rate 1.544 Mb/s ±50 ppm Line Code Bipolar AMI, with at least 12.5% average 1s density, and no more than 15 consecutive 0s. B8ZS coding option available. Line Impedance 100 ohms ±5% balanced Power Levels Refer to CCITT G.703, Section 2. Pulse Shape Refer to CCITT G.703, Section 2. Jitter Tolerance Meets both North American and CCITT performance standards. Jitter Attenuation Meets both North American and CCITT performance standards. Cross-connect Distance 660 ft maximum (LBO cards are selected in 330 ft increments). E1 RADIO ELECTRICAL CHARACTERISTICS Power Consumption NO PA WITH PA MDR-8706i-16 Non-Standby +14 dBm XMT Power 74W +23 dBm XMT Power 98 W +29 dBm XMT Power 131 W +31 dBm XMT Power 170 W (With Fan Assy) Hot-Standby +14 dBm XMT Power 135 W +23 dBm XMT Power 178 W +29 dBm XMT Power 235 W +31 dBm XMT Power 295 W (With Fan Assy) 1-19 MDR-8000 Series Radios General 3DH03220 Issue 6, July 2002 Table 1-4 (Cont.) Physical, Environmental, and Electrical Characteristics ITEM CHARACTERISTICS Frequency Diversity +14 dBm XMT Power 135 W +23 dBm XMT Power 184 W +29 dBm XMT Power 249 W +31 dBm XMT Power 316 W (With Fan Assy) MDR-8708-16i Non-Standby +14 dBm XMT Power 69 W +28 dBm XMT Power 126 W +30 dBm XMT Power 165 W (With Fan Assy) Hot-Standby +14 dBm XMT Power 126 W +28 dBm XMT Power 226 W +30 dBm XMT Power 286 W (With Fan Assy) Frequency Diversity +14 dBm XMT Power 126 W +28 dBm XMT Power 240 W +30 dBm XMT Power 307 W (With Fan Assy) MDR-8710/11-16i Non-Standby +15 dBm XMT Power 71 W +23 dBm XMT Power 126 W +27 dBm XMT Power 162 W (With Fan Assy) 180 W (With Fan Assy) +29 dBm XMT Power Hot-Standby +15 dBm XMT Power 130 W +23 dBm XMT Power 232 W +27 dBm XMT Power 280 W (With Fan Assy) 321 W (With Fan Assy) +29 dBm XMT Power Frequency Diversity +15 dBm XMT Power 240 W +27 dBm XMT Power 300 W (With Fan Assy) 336 W (With Fan Assy) +29 dBm XMT Power 1-20 130 W +23 dBm XMT Power 3DH03220 Issue 6, July 2002 MDR-8000 Series Radios General Table 1-4 (Cont.) Physical, Environmental, and Electrical Characteristics ITEM CHARACTERISTICS CAPACITY (MB/S, NOMINAL) MDR-8XXXi-2 2 X 2.048 MDR-8XXXi-4 4 X 2.048 MDR-8XXXi-8 8 X 2.048 MDR-8XXXi-12 12 X 2.048 MDR-8XXXi-16 16 X 2.048 MODULATION MDR-85XX-X 32 TCM MDR-87XX-X 128 TCM BAUD RATE (MB/S, ±0.003%) MDR-85XXi MDR-87XXI -2 0.9962 0.6897 -4 1.9070 1.3202 -8 3.8140 2.6404 -12 5.7209 3.9606 -16 7.6279 5.2808 MINIMUM RF CHANNEL BANDWIDTH (99% POWER) (MHZ) MDR-85XXi MDR-87XXI -2 1.25 0.80 -4 2.50 1.50 -8 5.00 3.00 -12 7.00 5.00 -16 9.00 7.00 Frequency Stability ±0.001% Receiver Noise Figure (measured at the filter input of a space-diversity radio) Not More Than 5 dB Max RSL (1 X 10-6 BER) (measured at the filter input of a space-diversity radio) -10 dBm Background BER Less Than 1 X 10-11 for RSL at least 5 dB above 1 X 10-6 threshold 1-21 MDR-8000 Series Radios General 3DH03220 Issue 6, July 2002 Table 1-4 (Cont.) Physical, Environmental, and Electrical Characteristics ITEM CHARACTERISTICS RADIO TYPE TYPICAL RCVR THRESHOLD (DBM) BER=10-6 TYPICAL DISPERSIVE FADE MARGIN (DB) BER=10-3 MDR-8506i-2 -88.0 78 MDR-8506i-4 -85.0 74 MDR-8506i-8 -82.0 65 MDR-8506i-12 -80.0 62 MDR-8506i-16 -79.0 60 MDR-8508i-2 -86.0 78 MDR-8508i-4 -83.0 74 MDR-8508i-8 -80.0 65 MDR-8508i-12 -78.0 62 MDR-8508i-16 -77.0 60 MDR-8510i-2 -85.0 78 MDR-8510i-4 -82.0 74 MDR-8510i-8 -79.0 65 MDR-8510i-12 -77.0 62 MDR-8510i-16 -76.0 60 MDR-8511i-2 -85.0 78 MDR-8511i-4 -82.0 74 MDR-8511i-8 -79.0 65 MDR-8511i-12 -77.0 62 MDR-8511i-16 -76.0 60 MDR-8706i-2 -84.0 81 MDR-8706i-4 -81.0 76 MDR-8706i-8 -78.0 68 MDR-8706i-12 -76.0 65 MDR-8706i-16 -75.0 63 1-22 3DH03220 Issue 6, July 2002 MDR-8000 Series Radios General Table 1-4 (Cont.) Physical, Environmental, and Electrical Characteristics ITEM CHARACTERISTICS MDR-8710i-2 -81.0 81 MDR-8710i-4 -78.0 76 MDR-8710i-8 -75.0 68 MDR-8710i-12 -73.0 65 MDR-8710i-16 -72.0 63 MDR-8711i-2 -81.0 81 MDR-8711i-4 -78.0 76 MDR-8711i-8 -75.0 68 MDR-8711i-12 -73.0 65 MDR-8711i-16 -72.0 63 Notes: 1. The typical RCVR thresholds listed above are for non-standby or hot-standby with space diversity configurations. For hot-standby configurations, deduct 1 dB for the A side and 10 dB for the B side. 2. RCVR thresholds and dispersive fade margins are typical values. Guaranteed values are 2 dB worse. Receiver DADE Automatic, range Not Less Than ±300 ns CEPT INTERFACE (E1) REQUIREMENTS Line rate 2.048 Mb/s ±50 ppm Line code High density bipolar with 3 zeroes maximum (HDB3) Line impedance 120 ohms nominal, line-to-line Pulse Shape Refer to CCITT G.703, Section 6. Pulse width 244 ns, nominal Interference 18 dB without affecting error-free performance Jitter tolerance 1.5 unit intervals peak-to-peak (UI p-p) from 20 to 2400 Hz, falling at 20 dB/decade to 0.2 UI p-p at 18 kHz, and continuing at 0.2 UI p-p from 8 to 100 kHz Intrinsic jitter 0.2 UI p-p, 10 Hz to 100 kHz; 0.05 UI p-p, 18 to 100 kHz Jitter transfer Jitter gain will not exceed 0.5 dB from 1 Hz, and will not exceed a gain line from 0.5 dB at 40 Hz falling (at 20 dB/decade) to -19.5 dB at 400 Hz. 1-23 MDR-8000 Series Radios General 3DH03220 Issue 6, July 2002 Table 1-4 (Cont.) Physical, Environmental, and Electrical Characteristics ITEM CHARACTERISTICS DS3 RADIO ELECTRICAL CHARACTERISTICS Power Consumption NO PA WITH PA MDR-8602-45 Non-Standby +14 dBm XMT Power 99 W +33 dBm XMT Power 178 W (With Fan Assy) Hot-Standby +14 dBm XMT Power 169 W +33 dBm XMT Power 305 W (With Fan Assy) MDR-8605u-45 Non-Standby +15 dBm XMT Power XXW +25 dBm XMT Power XXX W +30 dBm XMT Power XXX W (With Fan Assy) MDR-8606-135 Non-Standby +14 dBm XMT Power 74W +23 dBm XMT Power 98 W +29 dBm XMT Power 131 W +31 dBm XMT Power 170 W (With Fan Assy) Hot-Standby +14 dBm XMT Power 135 W +23 dBm XMT Power 178 W +29 dBm XMT Power 235 W +31 dBm XMT Power 295 W (With Fan Assy) Frequency Diversity +14 dBm XMT Power 1-24 135 W +23 dBm XMT Power 184 W +29 dBm XMT Power 249 W +31 dBm XMT Power 316 W (With Fan Assy) 3DH03220 Issue 6, July 2002 MDR-8000 Series Radios General Table 1-4 (Cont.) Physical, Environmental, and Electrical Characteristics ITEM CHARACTERISTICS MDR-8608-135 Non-Standby +14 dBm XMT Power 74 W +28 dBm XMT Power 131 W +30 dBm XMT Power 170 W (With Fan Assy) Hot-Standby +14 dBm XMT Power 135 W +28 dBm XMT Power 235 W +30 dBm XMT Power 295 W (With Fan Assy) Frequency Diversity +14 dBm XMT Power 135 W +28 dBm XMT Power 249 W +30 dBm XMT Power 316 W (With Fan Assy) MDR-8610/11-135 Non-Standby +15 dBm XMT Power 76 W +23 dBm XMT Power 131 W +27 dBm XMT Power 166 W (With Fan Assy) 184 W (With Fan Assy) +29 dBm XMT Power Hot-Standby +15 dBm XMT Power 140 W +23 dBm XMT Power 236 W +27 dBm XMT Power 289 W (With Fan Assy) 321 W (With Fan Assy) +29 dBm XMT Power Frequency Diversity +15 dBm XMT Power 140 W +23 dBm XMT Power 250 W +27 dBm XMT Power 309 W (With Fan Assy) 345 W (With Fan Assy) +29 dBm XMT Power 1-25 MDR-8000 Series Radios General 3DH03220 Issue 6, July 2002 Table 1-4 (Cont.) Physical, Environmental, and Electrical Characteristics ITEM CHARACTERISTICS CAPACITY (MB/S, NOMINAL) DS3 DS1 WAYSIDE MDR-8XXX/u-45 1 X 44.736 1 X 1.544 MDR-8XXX-135 3 X 44.736 3 X 1.544 MODULATION QAM 64 MDR-8405u-45 16 QAM MDR-8605u-45 64 QAM MDR-86XX-XXX 64 QAM RADIO TYPE TYPICAL RCVR THRESHOLD (DBM) BER=10-6 TYPICAL DISPERSIVE FADE MARGIN (DB) BER=10-3 MDR-8605U-45 -73.0 70 MDR-8602-45 -74.0 70 MDR-8606-45 -75.5 70 MDR-8606-135 -70.0 51 MDR-8608-45 -74.5 70 MDR-8608-135 -69.0 51 MDR-8611-45 -74.5 70 MDR-8611-135 -69.0 51 Notes: 1. With exception of the unlicensed radios (non-standby only), the typical RCVR thresholds listed above are for non-standby or hot-standby with space diversity configurations. For hot-standby configurations, deduct 1 dB for the A side and 10 dB for the B side. 2. For RCVR thresholds in the FCC Part 74 Broadcast Auxiliary Band from 6.875 to 7.125 GHz, deduct an additional 0.5 dB. MAXIMUM RSL (BER=1 X 10-6 BER (DBM) -10 DBM THRESHOLD INTERFERENCE COCHANNEL (DB) 34 ADJACENT CHANNEL (DB) -8 1-26 3DH03220 Issue 6, July 2002 MDR-8000 Series Radios General Table 1-4 (Cont.) Physical, Environmental, and Electrical Characteristics ITEM CHARACTERISTICS RF CHANNEL BANDWIDTH (MHZ) MDR-8605u-45 10 MDR-8602-45 10 MDR-8606-45 10 MDR-8606-135 30 MDR-8608-45 10 MDR-8608-135 30 MDR-8611-45 10 MDR-8611-135 30 EMISSION DESIGNATOR MDR-8X05-45 N/A MDR-8602-45 10MOD7W MDR-8606-45 10MOD7W MDR-8606-135 30MOD7W MDR-8608-45 10MOD7W MDR-8608-135 30MOD7W MDR-8611-45 10MOD7W MDR-8611-135 30MOD7W DS3 INTERFACE REQUIREMENTS Data Inputs/Outputs Compatible with DSX-3 cross-connect; interface specification, DS3 interface equipment per AT&T Compatibility bulletin 119. Line rate 44.736 Mb/s ±20 ppm Line code Bipolar with 3-Zero Substitution (B3ZS) Pulse Shape Refer to CCITT G.703, Section 5 1-27 MDR-8000 Series Radios General 3DH03220 Issue 6, July 2002 Table 1-4 (Cont.) Physical, Environmental, and Electrical Characteristics ITEM CHARACTERISTICS Wayside DS1 Interface Requirements Line Rate 1.544 Mb/s ±32 ppm Line Code Optionally provisionable as Bipolar/AMI or B8ZS Data Rate Sync tolerance ±130 ppm Line Impedance 100 ohms ±5% balanced Jitter Accommodation 5.0 UI p-p low frequency, o.1 UI p-p high frequency per TR-TSY-000499 para. 3.7.1 Jitter Transfer 0.1 dB low frequency per TR-TSY-000499 para. 3.7.2 Jitter Generation Less than 0.28 UI p-p OC3 RADIO ELECTRICAL CHARACTERISTICS Power Consumption NO PA WITH PA MDR-8706s-155 Non-Standby +14 dBm XMT Power 71W +23 dBm XMT Power 96 W +29 dBm XMT Power 128 W +31 dBm XMT Power 167 W (With Fan Assy) Hot-Standby +14 dBm XMT Power 130 W +23 dBm XMT Power 173 W +29 dBm XMT Power 230 W +31 dBm XMT Power 290 W (With Fan Assy) Frequency Diversity +14 dBm XMT Power 1-28 130 W +23 dBm XMT Power 179 W +29 dBm XMT Power 244 W +31 dBm XMT Power 311 W (With Fan Assy) 3DH03220 Issue 6, July 2002 MDR-8000 Series Radios General Table 1-4 (Cont.) Physical, Environmental, and Electrical Characteristics ITEM CHARACTERISTICS MDR-8708s-155 Non-Standby +14 dBm XMT Power 71 W +28 dBm XMT Power 128 W +30 dBm XMT Power 167 W (With Fan Assy) Hot-Standby +14 dBm XMT Power 130 W +28 dBm XMT Power 230 W +30 dBm XMT Power 290 W (With Fan Assy) Frequency Diversity +14 dBm XMT Power 130 W +28 dBm XMT Power 244 W +30 dBm XMT Power 311 W (With Fan Assy) MDR-8710/11s-155 Non-Standby +15 dBm XMT Power 73 W +23 dBm XMT Power 128 W +27 dBm XMT Power 164 W (With Fan Assy) 182 W (With Fan Assy) +29 dBm XMT Power Hot-Standby +15 dBm XMT Power 135 W +23 dBm XMT Power 231 W +27 dBm XMT Power 284 W (With Fan Assy) 316 W (With Fan Assy) +29 dBm XMT Power Frequency Diversity +15 dBm XMT Power 135 W +23 dBm XMT Power 245 W +27 dBm XMT Power 304 W (With Fan Assy) 340 W (With Fan Assy) +29 dBm XMT Power CAPACITY (MB/S, NOMINAL) OC3 DS1 WAYSIDE MDR-87XXs-155 3 X 51.840 3 X 1.544 1-29 MDR-8000 Series Radios General 3DH03220 Issue 6, July 2002 Table 1-4 (Cont.) Physical, Environmental, and Electrical Characteristics ITEM CHARACTERISTICS Frequency Stability ±0.001% Receiver Noise Figure (measured at the filter input of a space-diversity radio) Not More Than 5 dB MODULATION 128 TCM RF BAUD (MB/S =0.003 %) MDR-87XXs-155 25.285 RADIO TYPE TYPICAL RCVR THRESHOLD (DBM) BER=10-6 TYPICAL DISPERSIVE FADE MARGIN (DB) BER=10-3 MDR-8706s-155 -70.0 51 MDR-8708s-155 -69.0 51 MDR-8711s-155 -69.0 51 Note: The typical RCVR thresholds listed above are for non-standby or hot-standby with space diversity configurations. For hot-standby configurations, deduct 1 dB for the A side and 10 dB for the B side. MAXIMUM RSL (BER=1 X 10-6 BER (DBM) -10 THRESHOLD INTERFERENCE COCHANNEL (DB) 34 ADJACENT CHANNEL (DB) -8 RF CHANNEL BANDWIDTH (MHZ) MDR-87XXs-155 30 EMISSION DESIGNATOR MDR-87XXs-155 1-30 30MOD7W 3DH03220 Issue 6, July 2002 MDR-8000 Series Radios General Table 1-4 (Cont.) Physical, Environmental, and Electrical Characteristics ITEM CHARACTERISTICS OC3 INTERFACE REQUIREMENTS Data Inputs/Outputs Compatible with optical interfaces per ANSI TI.105/ 106/117. Line rate 155.52 Mb/s±20 ppm Line code Binary NRZ Payload STS-1, STS-3c Wavelength 1260-1360 nm Physical Interface LC Cable Assembly Type of Optical XCVR Laser Optical Input Power -8 to -28 dBm Optical Output Power -8 to -15 dBm Wayside DS1 Interface Requirements Line Rate 1.544 Mb/s ±32 ppm Line Code Optionally provisionable as Bipolar/AMI or B8ZS Data Rate Sync tolerance ±130 ppm Line Impedance 100 ohms ±5% balanced Jitter Accommodation 5.0 UI p-p low frequency, 0.1 UI p-p high frequency per TR-TSY-000499 para. 3.7.1 Jitter Transfer 0.1 dB low frequency per TR-TSY-000499 para. 3.7.2 Jitter Generation Less than 0.28 UI p-p 1.10 EXTERNAL INTERFACE REQUIREMENTS Refer to Table 1-5 for Operational Support System (OSS) external interface requirements. 1-31 MDR-8000 Series Radios General 3DH03220 Issue 6, July 2002 Table 1-5 OSS External Interface Requirements ITEM CHARACTERISTICS MCS-11 Type RS-422-compatible on backplane. Interfaces to 15-pin Dstyle connectors (J307, J308, J309, and J310). Receiver 0.2 to 6.0 V dc, 2.3 mA maximum Logic 1 -6.0 to -0.2 V dc, 2.8 mA maximum Logic 0 -7.0 to 7.0 V dc Common Mode Range Selectable; not less than 4 kilohms, balanced (bridged) Input Impedance Nominal 120 ohms terminated Input Clock Rate 62 to 68 kHz Driver Differential Output Voltage +6 V dc maximum, +150 mA maximum +2 V dc minimum, +150 mA maximum Output Impedance 108 to 130 ohms Output Clock Rate 64 kHz ±500 Hz, internal clock 300 Hz to -68 kHz, external clock TBOS Type RS-485-compatible on backplane. Interfaces to four pins (13-16) on 50-pin connector (J305). Receiver 0 to 5.0 V dc, 2.8 mA maximum Input Sensitivity ±200 mV Logic 1 -6.0 to -0.2 V dc, 2.8 mA maximum Logic 0 -7.0 to 7.0 V dc Input Impedance Nominal 120 ohms terminated Input Clock Rate 62 to 68 kHz Driver Differential Output Voltage +5 V dc maximum Output Clock Rate 64 kHz ±500 Hz, internal clock 300 Hz to 68 kHz, external clock 1-32 3DH03220 Issue 6, July 2002 MDR-8000 Series Radios General Table 1-5 (Cont.) OSS External Interface Requirements ITEM CHARACTERISTICS AUDIO HANDSET JACK Type RJ-11, 4-wire modular jack on AE-37Y Controller Frequency 300-3400 Hz Level 0 dBm maximum Impedance 220 ohms Off-hook Microphone current greater than 15 mA indicates handset is off hook. Maximum microphone current is 40 mA. RS-232 CONNECTOR Type 9-pin D-style ribbon (J312 and J313) Data Rate 9600 kb/s Input Levels Logic 0 3.0 to 30 V dc, input resistance 3 to 7 kilohms Logic 1 -30 to 0.5 V dc, input resistance 3 to 7 kilohms Output Levels Logic 0 8.0 to 12.0 V dc, not less than 300 ohms output resistance Logic 1 -12.0 to -8.0 V dc, not less than 300 ohms output resistance 4-WIRE AUDIO Type Connector 9-pin D-style (J316 and J317) LEVELS Input 0 or -16 dBm, 600 ohms balanced Output 0 or +7 dBm, 600 ohms balanced E-lead Single form-A contact to ground or -12 V dc when off hook. M-lead Normally open; voltage more negative than -9 V indicates input is off hook. Relay Interface All interface via AE-27AF Relay Interface module Type Connector 50-pin (J305) 1-33 MDR-8000 Series Radios General 3DH03220 Issue 6, July 2002 Table 1-5 (Cont.) OSS External Interface Requirements ITEM CHARACTERISTICS CONTROL INPUTS Number of Inputs Input Voltage 0 to 5 V dc, diode protected Current Limiting Resistor 10 kohm Pull-Up Resistor 100 kohm ALARM/STATUS INPUTS Number of Inputs 16 (13 through 16 are not available if TBOS is used) Input Voltage 0 to 5 V dc, diode protected Current Limiting Resistor 10 kohm Pull-Up Resistor 100 kohm Alarm State Logic 0 Non-Alarm State Logic 1 RELAY ALARM/STATUS OUTPUTS ALL RELAYS DEFAULT TO OPEN IF CARD POWER IS LOST, EXCEPT POWER SUPPLY ALARMS, WHICH DEFAULT TO GROUND. Number of Alarm Outputs Number of Status Outputs Activated State Closure to ground Maximum Contact Rating 0.5 A, 100 V Relay Control Outputs All relays default to open if card power is lost. Number of Outputs Activated State Closure to ground Maximum Contact Rating 0.5 A, 100 V CONTROL STATUS INPUTS Number of Inputs Input Voltage 0 to 5 V dc, diode protected Current Limiting Resistor 10 kohm Pull-Up Resistor 100 kohm 1-34 3DH03220 Issue 6, July 2002 1.11 MDR-8000 Series Radios General EQUIPMENT LISTING See Figure 1-2 through Figure 1-6. The following paragraphs describe required and optional equipment for the MDR-8000 radio, in top-down breakdown order. The MDR-8000 common shelf assembly (Table 1-6) consists of the shelf assembly wired (SAW), shelf internal RF cables, front cover, and modules. Refer to Table 1-7 for supplied and optional equipment. The MDR-8000 SAW (PN 3EM 00116 ABAA UDZZA), consists of backplane assembly, cardcage assembly, front cover, heatsinks, brackets, mounting hardware, and decal. Table 1-6 MDR-8000/i/s Common Shelf Assembly UNIT/MODULE PART NUMBER APPLICATIONS Single T/R, Domestic Kit 3DH 04122 AA Low Capacity DS1 Non-Standby Applications. Single T/R, International Kit 3DH 04122 AB Low Capacity E1 Non-Standby Applications. Dual T/R, Domestic Kit 3DH 04122 AC Low Capacity DS1 Hot-Standby Applications Dual T/R, International Kit 3DH 04122 AD Low Capacity E1 Hot-Standby Applications Single T/R, Domestic Kit 3DH 04122 AG High Capacity DS3 Non-Standby Applications. Dual T/R, Domestic Kit 3DH 04122 AJ High Capacity DS3 Hot-Standby Applications Single T/R, Domestic Kit 3DH 04122 AL High Capacity OC3 Non-Standby Applications With Wayside DS1 Dual T/R, Domestic Kit 3DH 04122 AN High Capacity OC3 Hot-Standby Applications With Wayside DS1 1-35 MDR-8000 Series Radios General 3DH03220 Issue 6, July 2002 AE–37Y CNTR C1 SELECT A3 AND B3 I / O I NT F C MODUL E S BY D ATA RATE CE–16BB POWER SUPPLY A1 I/O INTFC A3 UD–36A( ) RCVR A2 UD–51( ) PWR AMP A5 UD–35A( ) XMTR A4 I/O INTFC B3 UD–36A( ) RCVR B2 CE–16BB UD–35A( ) POWER XMTR SUPPLY B4 B1 UD–51( ) PWR AMP B5 AE–27AF RELAY INTFC C2 ALM INSVC WYSD ON WYSD ALM XMT AUX OC3 IN SC ALM OC3 ALM RCVR ON OC3 OUT RAD LOF ALM WYSD DS1 ON L INE WYSD ALM LBO/OC3 AUX INTFC SY NC ALM 23 4 56 DS3 ALIGN 78 COMMON LOS S ALM RAD DADE 901 ALM ON L INE SELECT LBO/OC3 AUX INTFC TO MATCH I/O INTFC (DATA RATE) DS1/E1 LBO DX - 3 5 P OC3 DS3 LBO DX- 35 N D S3 OC3 AUX INTFC DX- 35 M D S1 / EI Figure 1-2 Typical MDR-8000/i/s/u Component Locations and Options 1-36 LMW-7030 07/08/02 3DH03220 Issue 6, July 2002 MDR-8000 Series Radios General HEAT SINK RF SWITCH CIRCULATORS RCV XMT B–SIDE POWER RF SWITCH ANTENNA DIPLEXER REAR VIEW (SINGLE ANTENNA CONFIGURATION) A–SIDE POWER DIPLEXER MOUNTING BRACKET MW211–0061–1B 101898 Figure 1-3 MDR-8000/i/s Component Locations, Rear View 1-37 MDR-8000 Series Radios General 3DH03220 Issue 6, July 2002 Table 1-7 Supplied and Optional Equipment UNIT/MODULE PART NUMBER REMARKS AE-37Y-1 Controller: 3DH 03155 AA One Per Shelf ELMC Option Key 695-5647-018 Required for remote provisioning and downloading on DS1/E1 radios, and DS3 and OC3 radios without wayside DS1 ELMC Option Key 695-5647-019 Required for status of DS3 and OC3 radios with wayside DS1 (no remote provisioning or download capability provided) ELMC Option Key 695-5647-020 Required for remote provisioning and downloading of DS3 and OC3 radios with wayside DS1 3DH 03164 AA Two included in Dual T/R assembly kit. 264-0928-130 4 ea. 15A fast-blow fuses. (Two operational and two spares) Capacity and Application Dependent Two included in Dual T/R assembly kit. CE-16BB-1 Power Supply: Fuse DX-35( ) I/O Interface: Refer to Table 1-8 UD-35( ) Transmitter: Application and Frequency Dependent Two required for hot-standby Refer to Table 1-9 UM-62AX Crystal Oscillator Subboard 3DH 04123 AX Frequency Dependent The crystal oscillator subboard and crystal part numbers define this unit. The crystal is soldered to the oscillator subboard and factory tuned to the customers requirements. See drawing 3DH 03177 0000 BJZZA in the Diagrams Section. Capacity Key Modulation and Capacity Dependent Refer toTable 1-12. UD-51( ) Power Amplifier Frequency and Output Power Dependent. Optional. Two required for hot-standby (if equipped) Refer to Table 1-10. Cooling Fan Assembly Configuration Dependent Fan Assembly Without Lap Top Tray 967-0500-001 Fan Assembly With Lap Top Tray 967-0500-002 1-38 Assembly with fans always required for PAs with +27 or +29 (10/11 GHz), +28 dBm (8 GHz) and +31 dBm (6 GHz) output power. Assembly with fans and heat deflector are always required between radios in a rack with multiple shelf stacking (regardless of PA output power). 3DH03220 Issue 6, July 2002 MDR-8000 Series Radios General Table 1-7 (Cont.) Supplied and Optional Equipment UNIT/MODULE PART NUMBER Fan Assembly With Fans 967-0500-003 Fan Alarm Board 3DH 04169 AA Heat Deflector 3EM 03390 AA For use with fan assembly Application and Frequency Dependent Two required for hot-standby UD-36( ) Receiver: REMARKS Refer to Table 1-11 UM-62AX Crystal Oscillator Sub board 3DH 04123 AX Capacity Key Modulation and Capacity Dependent Line Buildout (LBO) Application and Distance Dependent Frequency Dependent The crystal oscillator subboard and crystal part numbers define this unit. The crystal is soldered to the oscillator subboard and factory tuned to the customers requirements. See drawing 3DH 03177 0000 BJZZA in the Diagrams section. Refer toTable 1-12. Refer to Table 1-13. AE-27AF Relay Interface 3DH 03219 AA Optional 2 X 4 Fiber Management Panel 3EM 0957 AA Optional. For use with OC3 2- or 4-fiber switched configurations. Provides interface for one or two radio shelves. Single-mode Splitter/Combiner 1AB 12332 0023 Single-mode fiber interface. One per radio shelf required. Multi-mode Splitter/Combiner 1AB 12332 0022 Multi-mode fiber interface. One per radio shelf required. 2 or 4 Fiber Management Panel 3EM 0957 AB Optional. For use with OC3 2- or 4-fiber configurations. Provides interface for one or two radio shelves. SC mating connectors required. Handset Kit 3CC07946AAAA Optional 155-3362-010 Replaces RJ9 to RJ11 cord supplied with handset kit. Diplexer Filter Kit Frequency Dependent Refer to drawing 3DH 03177 0000 UDZZA in the Diagrams section. Waveguide Iso-Adapters Frequency, Waveguide, and Configuration Dependent Optional. Refer to drawing 3DH 03177 0000 BJZZA in the Diagrams section. Waveguide Flanges Frequency, Waveguide, and Configuration Dependent Optional. Refer to drawing 3DH 03177 0000 BJZZA in the Diagrams section. Customer Interface Cables Applications Dependent Optional. Refer to drawing 3DH 03177 0000 BJZZA in the Diagrams section. Coiled Cord, RJ11 to RJ11 1-39 MDR-8000 Series Radios General 3DH03220 Issue 6, July 2002 Table 1-8 I/O Interface Options TYPE NO. PART NUMBER CAPACITY/APPLICATIONS DX-35M-1 3DH 03131 AA DS1/Domestic DX-35M-2 3DH 03131 AB E1/International DX-35N-1 3DH 03169 AG DS3 (1 or 3 DS3 Lines + DS1 Wayside per DS3) DX-35P-1 3EM 03134 AA OC3 (3 STS1 Lines + DS1 Wayside per STS1) CAUTION Possibility of Service Interruption XMTR Crystals should never be shipped as replacements without being soldered and tuned up in an oscillator assembly board at the factory. 1-40 3DH03220 Issue 6, July 2002 MDR-8000 Series Radios General Table 1-9 XMTR Options TYPE NO. PART NUMBER APPLICATIONS/FREQUENCY UD-35AN-1* 3DH 03137 AA DS1/E1 6400-6525 MHz UD-35AN-2* 3DH 03137 AB DS1/E1 6425-6875 MHz UD-35AN-3* 3DH 03137 AC DS1/E1 6875-7125 MHz UD-35AN-4 3DH 03137 AD DS1/E1/DS3/OC3 6400-6525 MHz UD-35AN-5 3DH 03137 AE DS1/E1/DS3/OC3 6525-6875 MHz UD-35AN-6 3DH 03137 AF DS1/E1/DS3/OC3 6875-7125 MHz UD-35AQ-1* 3DH 03236 AA DS1/E1 5850-5925 MHz UD-35AQ-2* 3DH 03236 AB DS1/E1 5925-6425 MHz UD-35AQ-3 3DH 03236 AC DS1/E1/DS3/OC3 5850-5925 MHz UD-35AQ-4 3DH 03236 AD DS1/E1/DS3/OC3 5925-6425 MHz UD-35AP-1* 3DH 03228 AA DS1/E1 10400-10700 MHz UD-35AP-2* 3DH 03228 AB DS1/E1 10700-11200 MHz UD-35AP-3* 3DH 03228 AC DS1/E1 11200-11700 MHz UD-35AP-4 3DH 03228 AD DS1/E1/DS3/OC3 10400-10700 MHz UD-35AP-5 3DH 03228 AE DS1/E1/DS3/OC3 10700-11200 MHz UD-35AP-6 3DH 03228 AF DS1/E1/DS3/OC3 11200-11700 MHz UD-35AR-1 3DH 04170 AA DS1/E1/DS3/OC3 7125-7750 MHz UD-35AR-2 3DH 04170 AB DS1/E1/DS3/OC3 7700-8500 MHz UD-35AS-1 3EM 09626 AA DS1/DS3 2025-2285 MHz *Obsolete. Have been replaced with DS1/E1/DS3/OC3 XMTR. 1-41 MDR-8000 Series Radios General 3DH03220 Issue 6, July 2002 Table 1-10 PA Options TYPE NO. PART NUMBER FREQUENCY/TOP OF STACK POWER UD-51Z-1 3DH 03218 AA 5850-6425 MHz, +23 dBm UD-51Z-2 3DH 03218 AB 6425-7125 MHz, +23 dBm UD-51Z-3 3DH 03218 AC 5850-6425 MHz, +29 dBm UD-51Z-4 3DH 03218 AD 6425-7125 MHz, +29 dBm UD-51Z-5 3DH 03218 AE 5850-6425 MHz, +31 dBm UD-51Z-6 3DH 03218 AF 6425-7125 MHz, +31 dBm UD-51AA-1 3DH 04136 AA 10550-10700 MHz, +27 dBm UD-51AA-2 3DH 04136 AB 10700-11200 MHz, +27 dBm UD-51AA-3 3DH 04136 AC 11200-11700 MHz, +27 dBm UD-51AA-4 3DH 04136 AD 10440-10700 MHz, +23 dBm UD-51AA-5 3DH 04136 AE 10700-11200 MHz, +23 dBm UD-51AA-6 3DH 04136 AF 11200-11700 MHz, +23 dBm UD-51AA-7 3DH 04136 AG 10440-10700 MHz, +29 dBm UD-51AA-8 3DH 04136 AH 10700-11200 MHz, +29 dBm UD-51AA-9 3DH 04136 AJ 11200-11700 MHz, +29 dBm UD-51AB-1 3EM 04070 AA 7125-7750 MHz, +28 dBm UD-51AB-2 3EM 04070 AB 7700-8500 MHz, +28 dBm UD-51AB-3 3EM 04070 AC 7125-7750 MHz, +30 dBm UD-51AB-4 3EM 04070 AD 7700-8500 MHz, +30 dBm UD-51AC-1 3EM 09037 AA 2025-2285 MHz, +32 dBm CAUTION Possibility of Service Interruption RCVR Crystals should never be shipped as replacements without being soldered and tuned up in an oscillator assembly board at the factory. 1-42 3DH03220 Issue 6, July 2002 MDR-8000 Series Radios General Table 1-11 RCVR Options TYPE NO. PART NUMBER APPLICATIONS/FREQUENCY UD-36AN-1 3DH 03132 AA DS1/E1 6400-6525 MHz UD-36AN-2 3DH 03132 AB DS1/E1 6525-6875 MHz UD-36AN-3 3DH 03132 AC DS1/E1 6875-7125 MHz UD-36AN-4* 3DH 03132 AD DS3 6400-6525 MHz UD-36AN-5* 3DH 03132 AE DS3 6525-6875 MHz UD-36AN-6* 3DH 03132 AF DS3 6875-7125 MHz UD-36AN-7 3DH 03132 AG DS3/OC3 6400-6525 MHz UD-36AN-8 3DH 03132 AH DS3/OC3 6525-6875 MHz UD-36AN-9 3DH 03132 AJ DS3/OC3 6875-7125 MHz UD-36AP-1 3DH 03231 AA DS1/E1 10400-10700 MHz UD-36AP-2 3DH 03231 AB DS1/E1 10700-11200 MHz UD-36AP-3 3DH 03231 AC DS1/E1 11200-11700 MHz UD-36AP-4* 3DH 03231 AD DS3 10400-10700 MHz UD-36AP-5* 3DH 03231 AE DS3 10700-11200 MHz UD-36AP-6* 3DH 03231 AF DS3 11200-11700 MHz UD-36AP-7 3DH 03231 AG DS3/OC3 10400-10700 MHz UD-36AP-8 3DH 03231 AH DS3/OC3 10700-11200 MHz UD-36AP-9 3DH 03231 AJ DS3/OC3 11200-11700 MHz UD-36AQ-1 3DH 03239 AA DS1/E1 5850-5925 MHz UD-36AQ-2 3DH 03239 AB DS1/E1 5925-6425 MHz UD-36AQ-3* 3DH 03239 AC DS3 5850-5925 MHz UD-36AQ-4* 3DH 03239 AD DS3 5925-6425 MHz UD-36AQ-5 3DH 03239 AE DS3/OC3 5850-5925 MHz UD-36AQ-6 3DH 03239 AF DS3/OC3 5925-6425 MHz UD-36AR-1 3DH 04175 AA DS1/E1 7125-7750 MHz UD-36AR-2 3DH 04175 AB DS1/E1 7700-8500 MHz UD-36AR-3* 3DH 04175 AC DS3 7125-7750 MHz UD-36AR-5 3DH 04175 AE DS3/OC3 7125-7750 MHz UD-36AR-6 3DH 04175 AF DS3/OC3 7700-8500 MHz UD-36AS-1 3EM 09628 AA DS1/DS3 2025-2285 MHz *Obsolete. Have been replaced with DS3/OC3 RCVR. 1-43 MDR-8000 Series Radios General 3DH03220 Issue 6, July 2002 Table 1-12 Capacity Keys for Transmitter and Receiver Modules CAPACITY KEY PN TCM/QAM RADIO TYPE CONFIGURATION 967-1609-001 32 TCM MDR-85XX-2 2 DS1 967-1609-002 32 TCM MDR-85XX-4 4 DS1 967-1609-003 32 TCM MDR-85XX-8 8 DS1 967-1609-004 32 TCM MDR-85XX-12 12 DS1 967-1609-005 32 TCM MDR-85XX-16 16 DS1 967-1609-006 128 TCM MDR-87XX-2 2 DS1 967-1609-007 128 TCM MDR-87XX-4 4 DS1 967-1609-008 128 TCM MDR-87XX-8 8 DS1 967-1609-009 128 TCM MDR-87XX-12 12 DS1 967-1609-010 128 TCM MDR-87XX-16 16 DS1 967-1609-011 32 TCM MDR-85XXi-2 2 E1 967-1609-012 32 TCM MDR-85XXi-4 4 E1 967-1609-013 32 TCM MDR-85XXi-8 8 E1 967-1609-014 32 TCM MDR-85XXi-12 12 E1 967-1609-015 32 TCM MDR-85XXi-16 16 E1 967-1609-016 128 TCM MDR-87XXi-2 2 E1 967-1609-017 128 TCM MDR-87XXi-4 4 E1 967-1609-018 128 TCM MDR-87XXi-8 8 E1 967-1609-019 128 TCM MDR-87XXi-12 12 E1 967-1609-020 128 TCM MDR-87XXi-16 16 E1 3EM 01583 AA 64 QAM MDR-86XX-45 1 DS3 3EM 01583 AB 64 QAM MDR-86XX-135 3 DS3 3EM 04176 AB 128 TCM MDR-87XX-155 3 STS1 *One capacity key is required for each UD-35( ) Transmitter and for each UD-36( ) Receiver. 1-44 3DH03220 Issue 6, July 2002 MDR-8000 Series Radios General Table 1-13 LBO Options MODULE/DESCRIPTION PART NUMBER APPLICATIONS DS1 LBO (Domestic) 0-330 ft. (Near) 3DH 03144 AA Linear/Ring DS1 LBO (Domestic) 330-650 ft. (Far) 3DH 03144 AB Linear/Ring E1 LBO (International) 3DH 03144 AC Linear/Ring DS3 LBO Hot Standby/ Frequency Diversity 3DH 04173 AK Linear/Ring 1.11.1 Diplexer Filter Kits Each kit contains diplexer, RF switch assembly, and cables for a specific configuration. The RF switch assembly (PN 978-0490-001, 002, 003 consist of isolators/circulators that are frequency dependent. For DS1 diplexer kit options, refer to Integral LM drawing (3DH 04122 0000 UDZZA) in the Diagrams section. For DS3 and OC3 diplexer kit options, refer to Integral LM drawing (3DH 04158 0000 UDZZA) in the Diagrams section. 1.11.2 Standard Filter Kits Each standard filter kit contains filter, isolators, circulators, and cables for a specific configuration. See Equipping Option Drawing (3DH 03177 0000 BJZZA) in the Diagrams section for information. 1.11.3 Cable Drop Kit Option The cable drop kit option is available for all radio configurations. This option replaces waveguide with coaxial cable. Refer to engineering drawing 967-1665-XXX in the Diagrams section for list of kit parts. 1.12 FAN ASSEMBLY See Figure 1-4 and Figure 1-5. The Fan Assembly fits into a standard 19 in. (483 mm) rack and occupies two vertical rack increments. Three options are available. Refer to Table 1-14 for details. 1-45 MDR-8000 Series Radios General 3DH03220 Issue 6, July 2002 FAN (4 EA) FAN ALARM CARD LAPTOP TRAY FRONT OF FAN ASSEMBLY ALM LED LMW-7031 07/08/02 Figure 1-4 Fan Assembly Table 1-14 Fan Assembly/Lap Top Tray Options DESCRIPTION PART NUMBER REMARKS Without Lap Top Tray 967-0500-001 Contains four fans that can be replaced individually. A front-panel alarm LED illuminates if a fan fails. 967-0500-002 Contains a pullout tray to place a lap top computer and four fans that can be replaced individually. A front-panel alarm LED illuminates if a fan fails. 967-0500-003 Contains a pullout tray to place a lap top computer and no fans or front-panel alarm LED. With Lap Top Tray With Lap Top Tray, Without Fans When equipped with fans, the fan assembly mounts directly below the radio and plugs into connector J302 on the MDR-8000 backplane. The four fans provide air flow to help dissipate heat. Power is provided by the backplane. When not equipped with fans, the assembly can be mounted in any rack location. 1-46 3DH03220 Issue 6, July 2002 MDR-8000 Series Radios General LAPTOP TRAY EXTENDED LMW-7032 07/08/02 Figure 1-5 Fan Assembly With Laptop Tray Fully Extended 1.13 HANDSET KIT See Figure 1-6. The handset kit consists of a handset, telephone cord, and handset holder. The handset is a push button multi-frequency type handset. The handset cord supplied with the handset contains an RJ11 connector on one end and RJ9 connector on the other end. A recommended cable is available with RJ11 connectors on both ends (PN 155-3362-010). The handset holder attaches to any flat surface with doublesided tape. 1-47 MDR-8000 Series Radios General TONE/PULSE (FV/DC) MODE SWITCH SET TO FV FOR TONES 3DH03220 Issue 6, July 2002 HANDSET HANDSET HOLDER LMW-7034 07/09/02 Figure 1-6 Handset Kit 1-48
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2002:07:10 15:47:23Z Modify Date : 2002:07:10 11:25:26-05:00 Page Count : 48 Creation Date : 2002:07:10 15:47:23Z Mod Date : 2002:07:10 11:25:26-05:00 Producer : Acrobat Distiller 5.00 for Macintosh Author : Carol Metadata Date : 2002:07:10 11:25:26-05:00 Creator : Carol Title : 01-General.fm Page Mode : UseOutlinesEXIF Metadata provided by EXIF.tools