Alliance Laundry Systems Extractors P232156R9 Users Manual Basic Installation/Operation For CE Pocket Hardmount Washer
P232156R9 to the manual f789c5e5-2f48-481e-b1f4-2f334502a243
2015-02-05
: Alliance-Laundry-Systems Alliance-Laundry-Systems-Extractors-P232156R9-Users-Manual-506551 alliance-laundry-systems-extractors-p232156r9-users-manual-506551 alliance-laundry-systems pdf
Open the PDF directly: View PDF 
.
Page Count: 45
| Download | |
| Open PDF In Browser | View PDF |
Basic Installation/Operation Washer-Extractors Pocket Hardmount P005I Keep These Instructions for Future Reference. (If this machine changes ownership, this manual must accompany machine.) www.comlaundry.com Part No. F232156R9 June 2010 Basic Installation/Operation Table of Contents Safety Information.............................................................................. Explanation of Safety Messages........................................................... Important Safety Instructions ............................................................... Safety Decals ........................................................................................ Operator Safety..................................................................................... Installation........................................................................................... General Specifications .......................................................................... UW UniLinc and M30 Control Models ........................................... UW A-Control, Variable-Speed Models.......................................... UW P-Control, Variable-Speed Models .......................................... UW 2 Speed Models with P-Control, S-Control, Mechanical Timer or B-Control ..................................................... UW 3 Speed Models with P-Control or S-Control .......................... UniLinc and M30 Control Models................................................... UWAV Models ................................................................................ UWPV Models................................................................................. UW 2 Speed Models with P-Control, S-Control, Mechanical Timer or B-Control ..................................................... UW 3 Speed Models with P-Control or S-Control .......................... Operation............................................................................................. UW Models With UniLinc Control ...................................................... UW Models With M30 Control............................................................ Models Equipped with Both Steam and Electric Heating (UniLinc and M30 Controls).............................................................. UW Models with S-Control.................................................................. UW Models with P-Control.................................................................. Pre-Operating Instructions ............................................................... Operating Instructions...................................................................... UW Models with A-Control ................................................................. UW Models with B-Control ................................................................. Disposal of Unit ................................................................................... 2 2 2 4 5 6 6 6 9 11 13 15 17 20 22 25 27 29 29 31 33 34 36 36 36 39 41 43 © Copyright 2010, Alliance Laundry Systems LLC All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher. F232156 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 1 Basic Installation/Operation Safety Information Explanation of Safety Messages Precautionary statements (“DANGER,” “WARNING,” and “CAUTION”), followed by specific instructions, are found in this manual and on machine decals. These precautions are intended for the personal safety of the operator, user, servicer, and those maintaining the machine. Important Safety Instructions WARNING To reduce the risk of fire, electric shock, serious injury or death to persons when using your washer, follow these basic precautions: W023 DANGER DANGER indicates the presence of a hazard that will cause severe personal injury, death, or substantial property damage if the danger is ignored. WARNING WARNING indicates the presence of a hazard that can cause severe personal injury, death, or substantial property damage if the warning is ignored. CAUTION CAUTION indicates the presence of a hazard that will or can cause minor personal injury or property damage if the caution is ignored. Additional precautionary statements (“IMPORTANT” and “NOTE”) are followed by specific instructions. IMPORTANT: The word “IMPORTANT” is used to inform the reader of specific procedures where minor machine damage will occur if the procedure is not followed. NOTE: The word “NOTE” is used to communicate installation, operation, maintenance or servicing information that is important but not hazard related. 1. Read all instructions before using the washer. 2. Refer to the GROUNDING INSTRUCTIONS in the INSTALLATION manual for the proper grounding of the washer. 3. Do not wash textiles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, kerosene, waxes, cooking oils, drycleaning solvents, or other flammable or explosive substances as they give off vapors that could ignite or explode. 4. Do not add gasoline, dry-cleaning solvents, or other flammable or explosive substances to the wash water. These substances give off vapors that could ignite or explode. 5. Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using a washing machine or combination washer-dryer, turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. The gas is flammable, do not smoke or use an open flame during this time. 6. Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used near children. This is a safety rule for all appliances. 7. Before the washer is removed from service or discarded, remove the door to the washing compartment. 8. Do not reach into the washer if the wash drum is moving. 2 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232156 Basic Installation/Operation 9. Do not install or store the washer where it will be exposed to water and/or weather. 10. Do not tamper with the controls. 11. Do not repair or replace any part of the washer, or attempt any servicing unless specifically recommended in the user-maintenance instructions or in published user-repair instructions that the user understands and has the skills to carry out. 12. To reduce the risk of an electric shock or fire, DO NOT use an extension cord or an adapter to connect the washer to the electrical power source. 13. Use washer only for its intended purpose, washing textiles. 14. Never wash machine parts or automotive parts in the machine. This could result in serious damage to the basket. 15. ALWAYS disconnect the washer from electrical supply before attempting any service. Disconnect the power cord by grasping the plug, not the cord. 16. Install the washer according to the INSTALLATION INSTRUCTIONS. All connections for water, drain, electrical power and grounding must comply with local codes and be made by licensed personnel when required. 20. If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent. 21. Be sure water connections have a shut-off valve and that fill hose connections are tight. CLOSE the shut-off valves at the end of each wash day. 22. Loading door MUST BE CLOSED any time the washer is to fill, tumble or spin. DO NOT bypass the loading door switch by permitting the washer to operate with the loading door open. 23. Always read and follow manufacturer’s instructions on packages of laundry and cleaning aids. Heed all warnings or precautions. To reduce the risk of poisoning or chemical burns, keep them out of the reach of children at all times (preferably in a locked cabinet). 24. Always follow the fabric care instructions supplied by the textile manufacturer. 25. Never operate the washer with any guards and/or panels removed. 26. DO NOT operate the washer with missing or broken parts. 27. DO NOT bypass any safety devices. 28. Failure to install, maintain, and/or operate this washer according to the manufacturer’s instructions may result in conditions which can produce bodily injury and/or property damage. 17. To reduce the risk of fire, textiles which have traces of any flammable substances such as vegetable oil, cooking oil, machine oil, flammable chemicals, thinner, etc., or anything containing wax or chemicals such as in mops and cleaning cloths, must not be put into the washer. These flammable substances may cause the fabric to catch on fire by itself. NOTE: The WARNINGS and IMPORTANT SAFETY INSTRUCTIONS appearing in this manual are not meant to cover all possible conditions and situations that may occur. Common sense, caution and care must be exercised when installing, maintaining, or operating the washer. 18. Do not use fabric softeners or products to eliminate static unless recommended by the manufacturer of the fabric softener or product. Any problems or conditions not understood should be reported to the dealer, distributor, service agent or the manufacturer. 19. Keep washer in good condition. Bumping or dropping the washer can damage safety features. If this occurs, have washer checked by a qualified service person. F232156 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 3 Basic Installation/Operation WARNING CAUTION This machine must be installed, adjusted, and serviced by qualified electrical maintenance personnel familiar with the construction and operation of this type of machinery. They must also be familiar with the potential hazards involved. Failure to observe this warning may result in personal injury and/or equipment damage, and may void the warranty. SW004 IMPORTANT: Ensure that the recommended clearances for inspection and maintenance are provided. Never allow the inspection and maintenance space to be blocked. Be careful around the open door, particularly when loading from a level below the door. Impact with door edges can cause personal injury. SW025 WARNING Never touch internal or external steam pipes, connections, or components. These surfaces can be extremely hot and will cause severe burns. The steam must be turned off and the pipe, connections, and components allowed to cool before the pipe can be touched. SW014 WARNING Install the machine on a level floor of sufficient strength. Failure to do so may result in conditions which can produce serious injury, death and/or property damage. W703 Safety Decals Safety decals appear at crucial locations on the machine. Failure to maintain legible safety decals could result in injury to the operator or service technician. To provide personal safety and keep the machine in proper working order, follow all maintenance and safety procedures presented in this manual. If questions regarding safety arise, contact the manufacturer immediately. Use manufacturer-authorized spare parts to avoid safety hazards. 4 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232156 Basic Installation/Operation Operator Safety Do not bypass any safety devices in the machine. WARNING WARNING NEVER insert hands or objects into basket until it has completely stopped. Doing so could result in serious injury. SW012 To ensure the safety of machine operators, the following maintenance checks must be performed daily: Never operate the machine with a bypassed or disconnected balance system. Operating the machine with severe out-of-balance loads could result in personal injury and serious equipment damage. SW039 1. Prior to operating the machine, verify that all warning signs are present and legible. Missing or illegible signs must be replaced immediately. Make certain that spares are available. 2. Check door interlock before starting operation of the machine: a. Attempt to start the machine with the door open. The machine should not start with the door open. b. Close the door without locking it and attempt to start the machine. The machine should not start with the door unlocked. c. Close and lock the door and start a cycle. Attempt to open the door while the cycle is in progress. The door should not open. If the door lock and interlock are not functioning properly, call a service technician. 3. Do not attempt to operate the machine if any of the following conditions are present: a. The door does not remain securely locked during the entire cycle. b. Excessively high water level is evident. c. Machine is not connected to a properly grounded circuit. F232156 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5 Basic Installation/Operation Installation General Specifications UW UniLinc and M30 Control Models Refer to Table 1. . Specifications 35 60 80 100 125 150 Overall width, in (mm) 33.375 (848) (Models through 5/31/09) 32.5 (826) (Models starting 6/1/09) 36.625 (930) 41.5 (1054) 41.5 (1054) 48 (1219) 50.25 (1277) Overall height, in (mm) 55.5 (1410) 64.5 (1638) 68.5 (1740) 68.5 (1740) 72 (1829) 79 (2007) Overall depth, in (mm) 43.625 (1108) (Variable-speed models through 5/31/09) 38.25 (972) (2-speed models through 5/31/09) 44 (1118) (All models starting 6/1/09) 45 (1143) 51.5 (1308) 54.5 (1384) 58 (1473) 63 (1600) Overall Dimensions Weight And Shipping Information Net weight, lb (kg) 1030 (468) 1300 (590) (Variable-speed (Variable-speed models) models) 750 (341) 1136 (515) (2-speed models) (2-speed models) 1730 (785) 1770 (805) 2420 (1100) 2970 (1347) Basket Weight, lb (kg) 150 (68) (Variable-speed models) 74 (34) (2-speed models) 330 (150) 360 (163) 550 (250) 572 (260)* Domestic shipping weight, lb (kg) 1085 (493) 1340 (608) (Variable-speed (Variable-speed models) models) 810 (367) 1175 (533) (2-speed models) (2-speed models) 1795 (814) 1835 (832) 2525 (1148) 3022 (1371) Domestic shipping volume, ft3 (m3) Domestic shipping dimensions, WxDxH, in (mm) Export shipping weight, lb (kg) Export shipping volume, ft3 (m3) Export shipping dimensions, WxDxH, in (mm) 200 (92) 66 (1.9) 84 (2.4) 119 (3.4) 119 (3.4) 166 (4.7) 172 (4.87) 38x47x64 (970x1200x 1630) 40x49x74.5 (1016x1245x 1892) 44x60.5 x77.25 (1118x1537x 1962) 44x60.5x77.25 (1118x1537x 1962) 61.5x60x77.75 (1560x1520x 1980) 54.5x69x79 (139x176x 201) 1990 (903) 2030 (921) 2800 (1270) 3350 (1520) 1150 (522) 1464 (664) (Variable-speed (Variable-speed models) models) 910 (413) 1300 (590) (2-speed models) (2-speed models) 78 (2.2) 96 (2.7) 134 (3.8) 134 (3.8) 184 (5.3) 220 (6.3) 41x50x65.5 (1050x1280x 1670) 43x52.125x74.5 (1092x1324x 1892) 47x63.5x77.25 (1194x1613x 1962) 47x63.5x77.25 (1194x1613x 1962) 63.5x63x80 (1620x1610x 2030) 61.5x71x87 (1562x1804x 2210) * Basket Only Table 1 (continued) 6 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232156 Basic Installation/Operation Table 1 (continued) Specifications 35 60 80 100 125 150 Cylinder diameter, in (mm) 26.25 (667) 32 (813) 36 (914) 36 (914) 42 (1067) 43 (1093) Cylinder depth, in (mm) 18.375 (467) 20 (508) 21 (533) 27 (686) 24 (610) 27.8125 (706) Cylinder volume, ft3 (l) 5.76 (163) 9.31 (264) 12.4 (350) 15.9 (450) 19.2 (544) 23.4 (662) Perforation size, in (mm) 0.1875 (4.8) 0.1875 (4.8) 0.1875 (4.8) 0.1875 (4.8) 0.1875 (4.8) 0.1875 (4.8) Perforation open area, % 18 22 23 23 24 21.5 Door opening size, in (mm) 14.375 (365) 17.5 (445) 17.5 (445) 17.5 (445) 20 (508) 24.75 (629) Height of door bottom above floor, in (mm) 23.75 (603) 28.25 (718) 29 (737) 29 (737) 29 (737) 32 (813) 1 1 1 1 1 1 Drive motor power, hp (kW) (variable-speed models) 5.0 (3.7) 5.0 (3.7) 7.5 (5.6) 7.5 (5.6) 10 (7.5) 10 (7.5) Drive motor power, hp (kW) (2-speed models) 2.0 (1.3) 3.0 (2.2) N/A N/A N/A N/A 26 (.35) 26 (.35) 26 (.40) 23 (.32) 40 (0.8) 40 (0.8) 37 (0.8) 36 (0.8) Wash Cylinder Information Door Opening Information Drive Train Information Number of motors in drive train Cylinder Speeds / Centrifugal Force Data 1/2 Wash/reverse, rpm (g) (Variable-speed models only) Wash/reverse, rpm (g) 26 (.25) 26 (.31) 42 (.66) 40 (.73) (Variable(UniLinc Models) speed models) 44 (.73) 44 (.88) (M30 Variable(2-speed models) speed models) 50 (.95) (2-speed models) Distribution, rpm (g) (Variable-speed models only) 83 (2.57) 71 (2.3) 73 (2.57) (UniLinc Models) 70 (2.5) (M30 Models) 70 (2.50) 62 (2.29) 61 (2.29) Very Low extract, rpm (g) (Variable-speed models only) 401 (60) 364 (60) 343 (60) 343 (60) 317 (60) 314 (60) Low extract rpm (g) (Variable-speed models only) 568 (120) 514 (120) 485 (120) 485 (120) 449 (120) 444 (120) Medium extract, rpm (g) (Variable-speed models only) 695 (180) 630 (180) 594 (180) 594 (180) 550 (180) 543 (180) 803 (240) (Variable-speed models) 504 (95) (2-speed models) 727 (240) (Variable-speed models) 465 (98) (2-speed models) 686 (240) 686 (240) 565 (190) 627 (240) 898 (300) 813 (300) 766 (300) 766 (300) 579 (200) 701 (300) STD (Variablespeed models) N/A (2-speed models) STD (Variablespeed models) N/A (2-speed models) STD STD STD STD High extract, rpm (g) Very High extract, rpm (g) (Variable-speed models only) Balance Detection Vibration switch installed Table 1 (continued) F232156 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 7 Basic Installation/Operation Table 1 (continued) Specifications 35 60 80 100 125 150 0.5 (13) 0.5 (13) 0.5 (13) 0.5 (13) 0.75 (19) 0.75 (19) 1 1 1 1 1 1 LOW 2.1 (1.5) 3.3 (2.4) 4.6 (3.3) 5.7 (4.1) 6.7 (4.9) 8.3 (6.0) MED 2.3 (1.7) 3.7 (2.6) 5.2 (3.8) 6.5 (4.7) 7.8 (5.6) 9.5 (6.9) HIGH 2.7 (1.9) 4.1 (2.9) 6.1 (4.4) 7.6 (5.5) 9.1 (6.6) 11.1 (8.0) 1.4 (21.4) 2.1 (33.4) 3.1 (48.4) 3.8 (60.4) 4.6 (72.0) 5.8 (91.0) 15.6 27.4 41.2 (Q-Volt) 27.4 (N-Volt) 41.2 (Q-Volt) 27.4 (N-Volt) N/A N/A 6 6 9 9 N/A N/A 2.6 4.2 4.2 4.2 N/A N/A LOW 2.4 (3.6) 2.4 (3.7) 2.2 (3.4) 2.8 (4.2) N/A N/A MED 2.7 (4.1) 2.7 (4.1) 2.5 (3.9) 3.2 (4.8) N/A N/A HIGH 3.1 (4.7) 3.0 (4.6) 3.0 (4.5) 3.7 (5.6) N/A N/A Direct Steam Heating (Optional) Steam inlet connection size, in (mm) Number of steam inlets Steam required to raise bath temperature 10°F, lb (10°C, kg) Average consumption per cycle, BHP (kg) Electrical Heating (Optional) Total electrical heating capacity, kW (N/A for 2-speed models) Number of electrical heating elements Electrical heating element size, kW Time required to raise bath temperature 10°F, min (5°C, min) Table 1 8 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232156 Basic Installation/Operation UW A-Control, Variable-Speed Models . Refer to Table 2. UWAV Pocket Hardmount General Specifications Specifications 35 60 80 100 125 Overall width, in. (mm) 32.5 (826) 36.625 (930) 41.5 (1054) 41.5 (1054) 48 (1219) Overall height, in. (mm) 55.5 (1410) 64.5 (1638) 65.5 (1740) 68.5 (1740) 72 (1829) Overall depth, in. (mm) 43.625 (1108) 45 (1143) 51.5 (1308) 54.5 (1384) 58 (1473) Overall Dimensions Weight and Shipping Information Net weight, lb. (kg) 750 (341) 1229 (559) 1640 (744) 1680 (762) 2211 (1005) Domestic shipping weight, lb. (kg) 800 (361) 1268 (575) 1705 (773) 1745 (792) 2525 (1148) 1.9 (66) 2.4 (84) 3.4 (119) 3.4 (119) 4.7 (166) Domestic shipping dimensions, WxDxH, in. (mm) 38x47x64 (970x1200x1630) 40x49x74.5 (1016x1245x1892) 44x60.5x77.25 (1118x1537x1962) 44x60.5x77.25 (1118x1537x1962) 61.5x60x77.75 (1560x1520x1980) Export shipping weight, lb. (kg) 910 (413) 1392 (631) 1900 (863) 1940 (881) 2591 (1178) Domestic shipping volume, (m3) ft.3 3 Export shipping volume, ft. (m3) Export shipping dimensions, WxDxH, in. (mm) 78 (2.2) 96 (2.7) 134 (3.8) 134 (3.8) 184 (5.3) 41x50x65.5 (1050x1280x1670) 43x52x72.5 (1092x1324x1892) 47x63.5x76 (1194x1613x1962) 47x63.5x76 (1194x1613x1962) 59x63x80 (1620x1610x2030) Wash Cylinder Information Cylinder diameter, in. (mm) 26.25 (667) 32 (813) 36 (914) 36 (914) 42 (1067) Cylinder depth, in. (mm) 18.375 (467) 20 (508) 21 (533) 27 (686) 24 (610) Cylinder volume, ft.3 5.76 (163) 9.31 (264) 12.4 (350) 15.9 (450) 19.2 (544) Perforation size, in. (mm) (l) .1875 (4.8) .1875 (4.8) .1875 (4.8) .1875 (4.8) .1875 (4.8) Perforation open area, % 18 22 23 23 24 Door opening size, in. (mm) 14.375 (365) 17.5 (445) 17.5 (445) 17.5 (445) 20 (508) Height of door bottom above floor, in. (mm) 23.75 (603) 28.25 (718) 29 (737) 29 (737) 29 (737) HOT 45 (170) 61 (231) 90 (341) 106 (401) 114 (431) COLD 24 (91) 29 (110) 41 (155) 47 (178) 52 (197) Average hot water used per hour, gal. (l) 78 (295) 102 (386) 139 (526) 161 (609) 168 (636) Average power used per cycle, kW/ hr 0.18 0.28 0.40 0.40 0.48 Average HVAC load, Btu/hr (kcal/ hr) 800 (202) 950 (240) 1050 (265) 1150 (290) 1200 (302) Door Opening Information Water Consumption Average water consumption per cycle, gal. (l) Power Consumption Table 2 (continued) F232156 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9 Basic Installation/Operation Table 2 (continued) UWAV Pocket Hardmount General Specifications Specifications 35 60 80 100 125 Drive Train Information Number of motors in drive train Drive motor power, hp (kW) 1 1 1 1 1 2.3 (1.7) 2.9 (2.2) 5.0 (3.7) 5.0 (3.7) 7.5 (5.6) 26 / .31 26 / .35 26 / .35 26 / .40 Cylinder Speeds / Centrifugal Force Data 1/2 Wash/reverse, RPM / g 26 / .25 Wash/reverse, RPM / g 42 / .66 40 / .73 40 / .82 40 / .82 37 / .82 Distribution, RPM / g 83 / 2.57 71 / 2.29 73 / 2.57 70 / 2.50 62 / 2.29 High extract 1, RPM / g 329 / 40 297 / 40 280 / 40 280 / 40 260 / 40 High extract 2, RPM / g 534 / 106 483 / 106 456 / 106 456 / 106 422 / 106 High extract 3, RPM / g 656 / 160 594 / 160 560 / 160 560 / 160 518/ 160 N/A STD STD STD STD N/A .25 (.010) NO-GO .20 (.008) GO .25 (.010) NO-GO .20 (.008) GO .25 (.010) NO-GO .20 (.008) GO .20 (.008) NO-GO .15 (.006) GO .5 (13) .5 (13) .5 (13) .5 (13) .75 (19) Balance Detection Vibration safety switch installed Safety switch gap setting, in. (mm)* Direct Steam Heating (Optional) Steam inlet connection size, in. (mm) Number of steam inlets 1 1 1 1 1 2.1 (1.5) 3.3 (2.4) 4.6 (3.3) 5.7 (4.1) 6.7 (4.9) Steam required to raise bath LOW temperature, MED 10°F, lb. (10°C, kg) 2.3 (1.7) 3.7 (2.6) 5.2 (3.8) 6.5 (4.7) 7.8 (5.6) HIGH 2.7 (1.9) 4.1 (2.9) 6.1 (4.4) 7.6 (5.5) 9.1 (6.6) Average consumption per cycle, bhp (kg) 1.4 (21.4) 2.1 (33.4) 3.1 (48.4) 3.8 (60.4) 4.6 (72.0) 15.6 25.2 37.8 37.8 50.4 Electrical Heating (Optional) Total electrical heating capacity, kW Number of electrical heating elements Electrical heating element size, kW Time required to raise bath temperature, 10°F, min. (10°C, min.) LOW 6 6 9 9 12 2.6 4.2 4.2 4.2 4.2 2.4 (3.6) 2.4 (3.7) 2.2 (3.4) 2.8 (4.2) 2.5 (3.8) MED 2.7 (4.1) 2.7 (4.1) 2.5 (3.9) 3.2 (4.8) 2.9 (4.4) HIGH 3.1 (4.7) 3.0 (4.6) 3.0 (4.5) 3.7 (5.6) 3.4 (5.1) * Gap setting should be made with “GO/NO-GO” type feeler gauge. Table 2 10 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232156 Basic Installation/Operation UW P-Control, Variable-Speed Models . Refer to Table 3. UWPV Models Specifications 35 60 80 100 125 150 Overall width, in. (mm) 32.5 (826) 36.63 (930) 41.5 (1054) 41.5 (1054) 48 (1219) 50.25 (1277) Overall height, in. (mm) 55.5 (1410) 64.5 (1638) 68.5 (1740) 68.5 (1740) 72 (1829) 79 (2007) Overall depth, in. (mm) 43.63 (1108) 45 (1143) 51.5 (1308) 54.5 (1384) 58 (1473) 63 (1600) Overall Dimensions Weight And Shipping Information Net weight, lb. (kg) 1030 (468) 1300 (590) 1730 (785) 1770 (805) 2420 (1100) 2970 (1347) Basket/shaft weight, lb. (kg) 150 (68) 200 (92) 330 (150) 360 (163) 550 (250) 260 (572) Domestic shipping weight, lb. (kg) 1085 (493) 1340 (608) 1795 (814) 1835 (832) 2525 (1148) 3022 (1371) Domestic shipping volume, ft.3 (m3) 66 (1.9) 84 (2.4) 119 (3.4) 119 (3.4) 166 (4.7) 172 (4.87) Domestic shipping dimensions, WxDxH, in. (mm) 38x47x64 (970x1200x1630) 40x49x74.5 44x60.5x77.25 44x60.5x77.25 61.5x60x77.75 (1016x1245x1892) (1118x1537x1962) (1118x1537x1962) (1560x1520x1980) 54.5x69x79 (139x176x201) Export shipping weight, lb. (kg) 1150 (522) 1464 (664) 1990 (903) 2030 (921) 2800 (1270) 3350 (1520) Export shipping volume, ft.3 (m3) 78 (2.2) 96 (2.7) 134 (3.8) 134 (3.8) 184 (5.3) 220 (6.3) Export shipping dimensions, WxDxH, in. (mm) 41x50x65.5 43x52.12x74.5 47x63.5x77.25 47x63.5x77.25 63.5x63x80 61.5x71x87 (1050x1280x1670) (1092x1324x1892) (1194x1613x1962) (1194x1613x1962) (1620x1610x2030) (1562x1804x2210) Wash Cylinder Information Cylinder diameter, in. (mm) 26.25 (667) 32 (813) 36 (914) 36 (914) 42 (1067) 43 (1093) Cylinder depth, in. (mm) 18.38 (467) 20 (508) 21 (533) 27 (686) 24 (610) 27.81 (706) Cylinder volume, ft.3 (l) 5.76 (163) 9.31 (264) 12.4 (350) 15.9 (450) 19.2 (544) 23.38 (662) Perforation size, in. (mm) 0.19 (4.8) 0.19 (4.8) 0.19 (4.8) 0.19 (4.8) 0.19 (4.8) 0.19 (4.8) Perforation open area, % 18 22 23 23 24 21.5 Door opening size, in. (mm) 14.34 (364) 17.5 (445) 17.5 (445) 17.5 (445) 20 (508) 24.75 (629) Height of door bottom above floor, in. (mm) 23.75 (603) 28.25 (718) 29 (737) 29 (737) 29 (737) 32 (813) 1 1 1 1 1 1 3.0 (2.2) 5.0 (3.7) 7.5 (5.6) 7.5 (5.6) 10 (7.5) 10 (7.5) Door Opening Information Drive Train Information Number of motors in drive train Drive motor power, hp (kW) Table 3 (continued) F232156 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 11 Basic Installation/Operation Table 3 (continued) UWPV Models Specifications 35 60 80 100 125 150 26 / .31 26 / .35 26 / .35 26 / .40 23 / .31 Cylinder Speeds / Centrifugal Force Data 1/2 Wash/reverse, RPM / g 26 / .25 Wash/reverse, RPM / g 42 / .66 40 / .73 40 / .82 40 / .82 37 / .82 36 / 0.8 Distribution, RPM / g 83 / 2.57 71 / 2.29 73 / 2.57 70 / 2.50 62 / 2.29 61 / 2.29 Medium extract, RPM / g 325 / 39 305 / 42 325 / 54 325 / 54 260 / 40 262 / 42 High extract l, RPM / g *Design U6 models 474 / 84 435 / 86 408 / 85 408 / 85 380 / 86 417 / 106 533 / 106 483 / 106 456 / 106 456 / 106 N/A 417 / 106 High extract 2, RPM / g 610 / 139 555 / 140 523 / 140 523 / 140 485 / 140 512 / 160 High extract 3, RPM / g *Design U6 models 795 / 235 720 / 235 671 / 230 601 / 184 534 / 170 573 / 200 897 / 308 813 / 300 767 / 300 767 / 300 580 / 200 701 / 300 STD STD STD STD STD STD .20 (.008) NO-GO .15 (.006) GO .25 (.010) NO-GO .20 (.008) GO .25 (.010) NO-GO .20 (.008) GO .25 (.010) NO-GO .20 (.008) GO .20 (.008) NO-GO .15 (.006) GO .30 (.014) NO-GO .33 (.013) GO 1/2 (13) 1/2 (13) 1/2 (13) 1/2 (13) 3/4 (19) 3/4 (19) 1 1 1 1 1 1 Balance Detection Vibration switch installed Switch gap setting, in. (mm)** Direct Steam Heating (Optional) Steam inlet connection size, in. (mm) Number of steam inlets Steam required to raise bath temperature, 10°F, lb. (10°C, kg) LOW 2.1 (1.5) 3.3 (2.4) 4.6 (3.3) 5.7 (4.1) 6.7 (4.9) 8.3 (6.0) MED 2.3 (1.7) 3.7 (2.6) 5.2 (3.8) 6.5 (4.7) 7.8 (5.6) 9.5 (6.9) HIGH 2.7 (1.9) 4.1 (2.9) 6.1 (4.4) 7.6 (5.5) 9.1 (6.6) 11.1 (8.0) Average consumption per cycle, bhp (kg) 1.4 (21.4) 2.1 (33.4) 3.1 (48.4) 3.8 (60.4) 4.6 (72.0) 5.8 (91.0) 15.6 25.2 37.8 37.8 50.4 N/A 6 6 9 9 12 N/A 2.6 4.2 4.2 4.2 4.2 N/A Electrical Heating (Optional) Total electrical heating capacity, kW Number of electrical heating elements Electrical heating element size, kW Time required to raise bath temperature, 10°F, min. (5°C, min.) LOW 2.4 (3.6) 2.4 (3.7) 2.2 (3.4) 2.8 (4.2) 2.5 (3.8) N/A MED 2.7 (4.1) 2.7 (4.1) 2.5 (3.9) 3.2 (4.8) 2.9 (4.4) N/A HIGH 3.1 (4.7) 3.0 (4.6) 3.0 (4.5) 3.7 (5.6) 3.4 (5.1) N/A * Refer to Figure 4 and Figure 5, and serial number decal on machine to determine design series. ** Gap setting should be made with “GO–NO-GO” type feeler gauge. N/A = Not Applicable Table 3 12 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232156 Basic Installation/Operation UW 2 Speed Models with P-Control, S-Control, Mechanical Timer or B-Control . Refer to Table 4. UW 2 Speed Models UW35 UW60 Overall Dimensions Overall width, in. (mm) 32-1/2 (826) 36-5/8 (930) Overall height, in. (mm) 55-1/2 (1410) 64-1/2 (1638) Overall depth, in. (mm) 38-1/4 (972) 45 (1143) 750 (341) 1136 (515) Weight and Shipping Information Net weight, lb. (kg) Basket/shaft weight, lb. (kg) Domestic shipping weight, lb. (kg) Domestic shipping volume, ft.3 (m3) Domestic shipping dimensions W x D x H, mm (in.) Export shipping weight, lb. (kg) 3 (m3) 74 (34) 200 (92) 810 (367) 1175 (533) 66 (1.9) 84 (2.4) 38 x 47 x 64 (970 x 1200 x 1630) 40 x 49 x 74-1/2 (1016 x 1245 x 1892) 910 (413) 1300 (590) 78 (2.2) 96 (2.7) 41 x 50 x 65-1/2 (1050 x 1280 x 1670) 43 x 52-1/8 x 74-1/2 (1092 x 1324 x 1892) 26-1/4 667 32 (813) 18-3/8 (467) 20 (508) Cylinder volume, ft. (l) 5.76 (163) 9.31 (264) Perforation size, in. (mm) 3/16 (4.8) 3/16 (4.8) Perforation open area, % 18 22 14-11/32 (364) 17-1/2 (445) 23-3/4 (603) 28-1/4 (718) HOT 45 (170) 61 (231) COLD 24 (91) 29 (110) 78 (295) 102 (386) Average power used per cycle, kWh 0.3 0.47 Max. nominal sound emission, dBA 72 81 Average HVAC load, Btu/hr (kcal/hr) 600 (151) 875 (220) Export shipping volume, ft. Export shipping dimensions W x D x H, in. (mm) Wash Cylinder Information Cylinder diameter, in. (mm) Cylinder depth, in. (mm) 3 Door Opening Information Door opening size, in. (mm) Height of door bottom above floor, in. (mm) Water Consumption* Average water consumption per cycle, gal. (l) Average hot water used per hour, gal. (l) Power Consumption * For P and S controls only. M control has no spray rinse. Table 4 (continued) F232156 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 13 Basic Installation/Operation Table 4 (continued) UW 2 Speed Models UW35 UW60 1 1 Wash/reverse motor power, HP (kW) 0.4 (0.3) 0.6 (0.5) High extract motor power, HP (kW) 1.8 (1.3) 3.0 (2.2) Wash/reverse speed, RPM / g 50 / 0.95 44 / 0.88 Distribution speed, RPM / g – – High extract speed, RPM / g 504 / 95 465 / 98 Drive Train Information Number of motors in drive train Cylinder Speeds/Centrifugal Force Data Balance Detection Vibration safety switch installed N/A STD Safety switch gap setting, in. (mm) N/A 0.008-0.010 (0.20-0.25) 1/2 (13) 1/2 (13) 1 1 Direct Steam Heating (Optional) Steam inlet connection size, in. (mm) Number of steam inlets Steam required to raise bath temperature, 10°F, lb. (10°C, kg) LOW 2.1 (1.5) 3.3 (2.4) MED 2.3 (1.7) 3.7 (2.6) HIGH Average consumption per cycle, bhp (kg/hr) 2.7 (1.9) 4.1 (2.9) 1.4 (21.4) 2.1 (33.4) 15.6 25.2 6 6 Electrical Heating (Optional) Total electrical heating capacity, kW Number of electrical heating elements Electrical heating element size, kW Time required to raise bath temperature, 10°F, min. (10°C, min.) 2.6 4.2 LOW 2.4 (3.6) 2.4 (3.7) MED 2.7 (4.1) 2.7 (4.1) HIGH 3.1 (4.7) 3.0 (4.6) Table 4 14 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232156 Basic Installation/Operation UW 3 Speed Models with P-Control or S-Control Refer to Table 5. UW 3 Speed Models UW35 UW60 Overall Dimensions Overall width, in. (mm) 32-1/2 (826) 36-5/8 (930) Overall height, in. (mm) 55-1/2 (1410) 64-1/2 (1638) Overall depth, in. (mm) 36-3/4 (933) 45 (1143) 750 (341) 557 (1229) Weight and Shipping Information Net weight, lb. (kg) Basket/shaft weight, lb. (kg) Domestic shipping weight, lb. (kg) Domestic shipping volume, ft.3 (m3) Domestic shipping dimensions, WxDxH, in. (mm) Export shipping weight, lb. (kg) 3 3 Export shipping volume, ft. (m ) 90 (41) 200 (92) 810 (367) 1268 (575) 66 (1.9) 2.4 (84) 38 x 47 x 64 (970 x 1200 x 1630) 40 x 49 x 74-1/2 (1016 x 1245 x 1892) 413 (910) 631 (1392) 2.2 (78) 2.7 (96) 41 x 50 x 65-1/2 (1050 x 1280 x 1670) 43 x 52-1/8 x 74-1/2 (1092 x 1324 x 1892) Cylinder diameter, in. (mm) 26-1/4 (667) 32 (813) Cylinder depth, in. (mm) 18-3/8 (467) 20 (508) Export shipping dimensions, WxDxH, in. (mm) Wash Cylinder Information Cylinder volume, ft.3 5.76 (163) 9.31 (264) Perforation size, in. (mm) (l) 3/16 (4.8) 3/16 (4.8) Perforation open area, % 18 22 14-11/32 (364) 17-1/2 (445) 23-3/4 (603) 28-1/4 (718) Door Opening Information Door opening size, in. (mm) Height of door bottom above floor, in. (mm) Water Consumption Average water consumption per cycle, gal. (l) Average hot water used per hour, gal. (l) HOT 45 (170) 61 (231) COLD 24 (91) 29 (110) 78 (295) 102 (386) Table 5 (continued) F232156 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 15 Basic Installation/Operation Table 5 (continued) UW 3 Speed Models UW35 UW60 Average power used per cycle, kWh 0.24 0.47 Max nominal sound emission, dBA 72 81 625 (157) 875 (220) 2 2 Wash/reverse motor power, hp (kW) 0.4 (0.3) 0.9 (0.7) Distribution motor power, hp (kW) 0.45 (0.34) 1.0 (0.8) High extract motor power, hp (kW) 3 (2.2) 3.5 (2.6) 45 / 0.76 42 / 0.80 Power Consumption Average HVAC load, Btu/hr (kcal/hr) Drive Train Information Number of motors in drive train Cylinder Speeds/Centrifugal Force Data Wash/reverse speed, RPM / g Distribution speed, RPM / g 75 / 2.10 67 / 2.04 High extract speed, RPM / g 597 / 133 561 / 139 Vibration safety switch installed N/A STD Safety switch gap setting, in. (mm) N/A 0.006 (0.15) 1/2 (13) 1/2 (13) 1 1 2.1 (1.5) 3.3 (2.4) MED 2.3 (1.7) 3.7 (2.6) HIGH 2.7 (1.9) 4.1 (2.9) 1.4 (21.4) 2.1 (33.4) 15.6 25.2 Balance Detection Direct Steam Heating (Optional) Steam inlet connection size, in. (mm) Number of steam inlets Steam required to raise bath temperature, 10°F, lb. (10°C, kg) LOW Average consumption per cycle, bhp (kg) Electrical Heating (Optional) Total electrical heating capacity, kW Number of electrical heating elements Electrical heating element size, kW Time required to raise bath temperature, 10°F, min. (10°C, min.) 6 6 2.6 4.2 LOW 2.4 (3.6) 2.4 (3.7) MED 2.7 (4.1) 2.7 (4.1) HIGH 3.1 (4.7) 3.0 (4.6) Table 5 16 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232156 Basic Installation/Operation UniLinc and M30 Control Models WARNING Dimensional Clearances Crush hazard. Allow a minimum of 24 inches (60 cm) at the rear and 6 inches (45 cm) at the sides for maintenance, inspection, and adjustment. Allow at least 6 inches (45 cm) between machines in multiple installations. Machine dimensions are indicated in Table 6 and specified in Figure 1 and Figure 2. To avoid personal injury and/or property damage, do not tip the UW150 machine more than 25 degrees in any direction. W642 NOTE: The dimensions shown here are for planning purposes only. They are approximate and subject to normal manufacturing tolerances. If exact dimensions are required for construction purposes, contact the distributor or the manufacturer. We reserve the right to make changes at any time without notice. UniLinc and M30 Control Pocket Hardmount Machine Dimensions (Refer to Figure 1 and Figure 2) Dimension 35 60 80 100 125 150 in mm in mm in mm in mm in mm in mm A 30.125 765 35.625 905 41.125 1045 41.125 1045 48 1219 50.25 1277 B1 33.375 (Models through 5/31/09) 32.5 (Models starting 6/1/09) 848 36.625 930 41.5 1054 41.5 1054 48 1219 50.25 1277 C 23.75 603 28.25 718 29 737 29 737 29 737 32 813 1108 45 1143 51.5 1308 54.5 1384 58 1473 63 1600 D 43.625 (Variable speed models through 5/31/09) 38.25 (2-speed models through 5/31/09) 44 (All models starting 6/1/09) E2 .5 13 1 25 3 76 3 76 1.5 38 2.9 73 F 55.5 1410 64.5 1638 68.5 1740 68.5 1740 72 1829 79 2007 G2 36 914 36 914 43.75 1111 43.75 1111 48 1219 56 1422 H 8 203 15.5 394 16.875 429 16.875 429 11.375 289 15.75 400 J 43.14 1096 49.8 1265 53.54 1360 53.54 1360 56.4 1433 62.85 1596 K 46.64 1185 53.3 1354 57.04 1449 57.04 1449 59.9 1521 66.35 1685 L 5.12 130 5.12 130.05 7.12 181 7.12 181 7.12 181 7.12 181 M 2.62 66 2.62 66 3.62 92 3.62 92 3.62 92 3.62 92 N 1.37 35 1.37 35 2.25 57 2.25 57 2.25 57 2.25 57 O 3.87 98 3.87 98 5 127 5 127 5 127 5 127 P 2.5 64 2.5 64 2.75 70 2.75 70 2.75 70 2.75 70 Q 2.5 64 2.5 64 3.5 89 3.5 89 3.5 89 3.5 89 1 Overhang dimensions for the optional starch dispenser are as follows: 35, 3.88 inches (9.86 cm); 60, 1.75 inches (4.45 cm); 80 and 100, 0.33 inches (0.83 cm). (The starch dispenser does not overhang the 125.) (No longer available.) 2 The overhang dimension for the premium wet clean module option (compatible with wet-clean-capable washer-extractors only) adds 24 inches (60.96 cm) to combined machine dimensions E and G. Table 6 F232156 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 17 Basic Installation/Operation 3 2 3 4 8 5 1 6 7 F E C G (BASE) D (OVERALL) A (BASE) B (OVERALL) 10 L 11 9 M 12 Q 13 16 K N P O J 15 14 H 35 - 125 PHM770N 1 2 3 4 5 6 7 8 External Supply Control Mounting Bracket (Models through 6/30/08) Door Unlock Button Supply Valve Box Emergency Stop Button Supply Dispenser (optional) Door Handle Spray Rinse Nozzle (optional) Recirculation Inlet 9 10 11 12 13 14 15 16 Water Inlet Valves Steam Connection (Optional) Shell Vent Power Input (Electric Heat Models) Power Input (Non-Electric Heat Models) Drain (80, 100 and 125 models only) Drain Overflow Vent Figure 1 18 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232156 Basic Installation/Operation 2 3 9 4 1 10 11 5 7 8 F J 6 C G (BASE) A (BASE) E D (OVERALL) B (OVERALL) L 12 M 10 Q 13 K 11 15 N P O J H 14 UW150TV TMB736N PHM736N 1 2 3 4 5 6 7 External Supply Control Mounting Bracket (Models through 6/30/08) Door Unlock Button Emergency Stop Button Supply Valve Box Supply Dispenser Spray Rinse Nozzle Door Handle 8 9 10 11 12 13 14 15 Basket Jog Buttons Recirculation Inlet Shell Vent Water Inlet Valves Steam Connection (Optional) Power Input Drain Overflow Vent Figure 2 F232156 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 19 Basic Installation/Operation UWAV Models Dimensional Clearances Allow a minimum of 24 inches (60 cm) at the rear and 18 inches (45 cm) at the sides for maintenance, inspection, and adjustment. Allow at least 18 inches (45 cm) between machines in multiple installations. Machine dimensions are indicated in Figure 3 and specified in Table 7. NOTE: The dimensions shown here are for planning purposes only. They are approximate and subject to normal manufacturing tolerances. If exact dimensions are required for construction purposes, contact the distributor or the manufacturer. We reserve the right to make changes at any time without notice. UWAV Pocket Hardmount Machine Dimensions (Refer to Figure 3) 35 60 80 100 125 Dimension in. mm in. mm in. mm in. mm in. mm A 30.125 765 35.625 905 41.125 1045 41.125 1045 48 1219 B 32.5 826 36.625 930 41.5 1054 41.5 1054 48 1219 C 23.75 603 28.25 718 29 737 29 737 29 737 D 43.625 972 45 1143 51.5 1308 54.5 1384 58 1473 E 1 25 1 25 3 76 3 76 1.5 38 F 55.5 1410 64.5 1638 68.5 1740 68.5 1740 72 1829 G 30.5 775 36 914 43.75 1111 43.75 1111 48 1219 H 7.625 194 15.5 394 16.875 429 16.875 429 11.375 289 I 43.875 1114 55 1397 58.5 1486 58.5 1486 63.375 1610 Table 7 20 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232156 Basic Installation/Operation 1 2 1 2 3 4 5 6 < < 3 F E C G (BASE) A (BASE) B (OVERALL) D (OVERALL) 4 5 6 7 I H Models UW 35 – 125 PHM623N 1 2 3 4 Supply Valve Box Supply Dispenser Door Handle Water Inlet Valve 5 6 7 Power Input Area (Inside) Steam Connector (Optional) Drain Figure 3 F232156 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 21 Basic Installation/Operation UWPV Models Dimensional Clearances Allow a minimum of 24 inches (60 cm) at the rear and 18 inches (45 cm) at the sides for maintenance, inspection and adjustment. Allow at least 18 inches (45 cm) between machines in multiple installations. Machine dimensions are indicated in Figure 4 and specified in Table 8. NOTE: The dimensions shown here are for planning purposes only. They are approximate and subject to normal manufacturing tolerances. If exact dimensions are required for construction purposes, contact the distributor or the manufacturer. We reserve the right to make changes at any time without notice. UWPV Pocket Hardmount Machine Dimensions (Refer to Figure 4 and Figure 5) Dimension 35 60 80 100 125 150 in mm in mm in mm in mm in mm in mm A 30.12 765 35.63 905 41.12 1045 41.12 1045 48 1219 50.25 1277 B1 33.39 847 36.63 930 41.5 1054 41.5 1054 48 1219 50.25 1277 C 23.75 603 28.25 718 29 737 29 737 29 737 32 813 D 43.63 1108 45 1143 51.5 1308 54.5 1384 58 1473 63 100 E2 .5 13 1 25 3 76 3 76 1.5 38 2.9 4.6 F 55.5 1410 64.5 1638 68.5 1740 68.5 1740 72 1829 79 2007 G2 36 914 36 914 43.75 1111 43.75 1111 48 1219 56 1422 H 8 203 15.52 394 16.88 429 16.88 429 11.38 289 15.75 400 I 43.88 1114 55 1397 58.5 1486 58.5 1486 63.38 1610 70.25 1778 1 Overhang dimensions for the optional starch dispenser are as follows: UW35PV, 3.88 inches (9.86 cm); UW60PV, 1.75 inches (4.45 cm); UW80PV and UW100PV, 0.33 inches (0.83 cm). (The starch dispenser does not overhang the UW125PV.) (No longer available.) 2 The overhang dimension for the premium wet clean module option (compatible with wet-clean-capable washer-extractors only) adds 24 inches (60.96 cm) to combined machine dimensions E and G. Table 8 22 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232156 Basic Installation/Operation 1 5 2 3 4 F E C G (BASE) A (BASE) B (OVERALL) D (OVERALL) 11 6 7 8 I 10 9 H PHM387N UW35PV – UW125PV PHM387N 1 2 3 4 5 6 Supply Valve Box Supply Dispenser Door Handle Spray Rinse Nozzle Recirculation Inlet Premium Wet Clean Module (Optional) 7 8 9 10 11 Power Input Area (Inside) Steam Connection (Optional) Premium Wet Clean Module (Optional) Drain Water Inlet Valves Figure 4 F232156 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 23 Basic Installation/Operation 1 5 6 1 2 3 4 5 6 7 8 9 1 0 5 4 3 2 1 2 4 F I 3 C A (BASE) G (BASE) 7 D (OVERALL) B (OVERALL) E 8 H 9 UW150PV PHM603N 1 2 3 4 5 Supply Valve Box Supply Dispenser Spray Rinse Nozzle Door Handle Recirculation Inlet 6 7 8 9 Water Inlet Valves Power Input Area (Inside) Steam Connection (Optional) Drain Figure 5 24 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232156 Basic Installation/Operation UW 2 Speed Models with P-Control, S-Control, Mechanical Timer or B-Control UW 2 Speed Machine Dimensions (Refer to Figure 6) Dimensions Dimensional Clearances Allow a minimum of 24 inches (60 cm) at the rear, and 18 inches (45 cm) at the sides for maintenance, inspection and adjustment. Allow at least 18 inches (45 cm) between machines in multiple installations. Machine dimensions are indicated in Figure 6 and specified in Table 9. NOTE: The dimensions shown here are for planning purposes only. They are approximate and subject to normal manufacturing tolerances. If exact dimensions are required for construction purposes, contact the distributor or the manufacturer. We reserve the right to make changes at any time without notice. * 35 60 in. mm in. mm A 30.13 765 35.63 905 B* 32.5 826 36.63 930 C 23.75 603 28.25 718 D 38.25 972 45 1143 E 0.5 13 1 25 F 55.5 1410 64.5 1638 G 30.5 775 36 914 H 8 203 15.5 394 I 43.88 1114 55 1397 Overhang dimensions for the optional starch dispenser are as follows: UW35, 3.88 inches (9.86 cm); UW60, 1.75 inches (4.45 cm). Table 9 F232156 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 25 Basic Installation/Operation 1 2 3 4 F E E C A (BASE) G (BASE) B (OVERALL) D (OVERALL) 5 6 7 I 8 H PHM388N UW 2 Speed Models P032I 1 2 3 4 Supply Valve Box Supply Dispenser Door Handle Spray Rinse Nozzle (2 Speed, P-Control Models Only) 5 6 7 8 Water Inlet Valves Power Input Area (Inside) Steam Connection (Optional) Drain Figure 6 26 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232156 Basic Installation/Operation UW 3 Speed Models with P-Control or S-Control UW 3 Speed Machine Dimensions (Refer to Figure 7) Dimensions Dimensional Clearances Allow a minimum of 24 inches (60 cm) at the rear and 18 inches (45 cm) at the sides for maintenance, inspection, and adjustment. Allow at least 18 inches (45 cm) between machines in multiple installations. Machine dimensions are indicated in Figure 7 and specified in Table 10. NOTE: The dimensions shown here are for planning purposes only. They are approximate and subject to normal manufacturing tolerances. If exact dimensions are required for construction purposes, contact the distributor or the manufacturer. We reserve the right to make changes at any time without notice. * 35 60 in. mm in. mm A 30.13 765 35.63 905 B* 32.5 825 36.63 930 C 23.75 604 28.25 718 D 36.75 934 45 1143 E 1 25 1 25 F 55.5 1409 64.5 1638 G 30.5 775 36 914 H 7.63 194 15.5 394 I 43.63 1108 55 1397 Overhang dimensions for the optional starch dispenser are as follows: UW35, 3.88 inches (9.86 cm); UW60, 1.75 inches (4.45 cm). Table 10 F232156 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 27 Basic Installation/Operation 1 2 3 4 F E C G (BASE) A (BASE) D (OVERALL) B (OVERALL) 6 5 7 8 I H P032I UW 3 Speed Models P032I 1 2 3 4 Supply Valve Box Supply Dispenser Door Handle Spray Rinse Nozzle 5 6 7 8 Steam Connection (Optional) Water Inlet Valves Power Input Area (Inside) Drain Figure 7 28 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232156 Basic Installation/Operation Operation UW Models With UniLinc Control 1. When display shows the Cycle Menu Screen washer-extractor is ready to be loaded with laundry. unlock button. Refer to Figure 10. 150 MODELS 2. On UW35-UW150 models. Press the door unlock button located on the lower left front on the control. Refer to Figure 8. 3. Open door within five seconds of pressing the door unlock keypad. UW35 – UW150 MODELS PHM717N PHM705N PHM705N Figure 8 4. On 35 – 125 models, turn door handle clockwise and swing the door left to open. Door must be opened within 5 seconds of pressing the door unlock button. Refer to Figure 9. Figure 10 6. Load the washer-extractor to full capacity whenever possible, but do not exceed the rated dry-weight capacity of the machine if the fabric to be washed is quite dense, closely woven, and heavily soiled. Overloading can result in an inferior wash. The operator may need to experiment to determine load size based on fabric content, soil content, and level of cleanliness required. Do not underload the machine. Underloading can result in premature bearing and sealing failure and outof-balance situations. UW35 – UW125 MODELS WARNING MACHINE MAY BE HOT AND CAUSE BURNS ATTEMPT NO ENTRY UNTIL BASKET HAS STOPPED SERIOUS INJURY MAY RESULT PHM590N MD004J Figure 9 Figure 11 5. On 150 models, turn handle counterclockwise and swing the door right to open. Door must be opened within 5 seconds of pressing the door F232156 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 29 Basic Installation/Operation As the cycle proceeds, the display will show a summary of the cycle occurring. Refer to Figure 8 CAUTION Be careful around the open door, particularly when loading from a level below the door. Impact with door edges can cause personal injury. SW025 NOTE: When washing items which may disintegrate or fragment, such as mop heads or sponges, use laundry nets to prevent drain blockage. To begin the cycle at any step other than the first step, press the keypad to advance through the cycle to the desired starting point. (The Rapid Advance feature keypad is enabled at the factory and can be disabled.) Refer to Programming Manual for information to disable Rapid Advance. If the door is not closed and locked, the display will indicate that the door needs to closed and locked. Refer to Figure 13. IMPORTANT: To prevent out-of-balance conditions, premature wear or damage to machine when using laundry nets, use several small nets in a load. 7. When loading is complete, ensure that all fabric is inside the basket. Then close and lock the door. Add dry supplies are placed in the supply dispenser compartment cups prior to the start of each cycle. Liquid supplies can be injected directly into the supply dispenser by an external chemical supply system. NOTE: Supply dispenser compartment cups must not be removed when an external chemical injection supply system is attached to the washerextractor. 8. Press and wash cycle. keypads to select desired Cycle01: Towels White Bleach Figure 13 Close door to start cycle or press return to Cycle Menu. keypad to 10. The cycle will continue until its completion. Then the display will show the door is ready to be unlocked and opened. NOTE: The Drain Step that occurs before an Extract Step or a Spray Rinse Extract Step cannot be skipped using Rapid Advance. The machine MUST drain and balance during the Drain Step before it can extract. For Technical Service Distributor ABC 1-800-555-5555 Cycle41: Supply Set Up PHM706N Cycle02: Towels White Cycle Menu PHM702N Figure 12 9. Press 30 to start the selected cycle. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232156 Basic Installation/Operation UW Models With M30 Control 1. When display shows a cycle number, the washerextractor is ready to be loaded with laundry. 2. Press the STOP/UNLOCK button located on the control. Refer to Figure 14. 5. Load the washer-extractor to full capacity whenever possible, but do not exceed the rated dry-weight capacity of the machine if the fabric to be washed is quite dense, closely woven, and heavily soiled. Overloading can result in an inferior wash. The operator may need to experiment to determine load size based on fabric content, soil content and level of cleanliness required. Do not underload the machine. Underloading can result in premature bearing and sealing failure and out-ofbalance situations. WARNING MACHINE MAY BE HOT AND CAUSE BURNS ATTEMPT NO ENTRY UNTIL BASKET HAS STOPPED SERIOUS INJURY MAY RESULT PHM758N Figure 14 3. Open door within five seconds of pressing the door unlock keypad. 4. Turn the door handle clockwise and swing the door left to open it. The door must be opened within 5 seconds of pressing the door unlock button. Refer to Figure 15. PHM590N Figure 16 PHM593N Figure 15 F232156 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 31 Basic Installation/Operation CAUTION Be careful around the open door, particularly when loading from a level below the door. Impact with door edges can cause personal injury. SW025 NOTE: When washing items which may disintegrate or fragment, such as mop heads or sponges, use laundry nets to prevent drain blockage. IMPORTANT: To prevent out-of-balance conditions, premature wear or damage to machine when using laundry nets, use several small nets in a load. 6. When loading is complete, ensure that all fabric is inside the basket. Then close and lock the door. 7. Where applicable, add dry supplies into the supply dispenser compartment cups prior to the start of each cycle. Liquid supplies can be injected directly into the washer-extractor by an external chemical supply system. NOTE: Supply dispenser compartment cups must not be removed when an external chemical injection supply system is attached to the washerextractor. 8. Press the numeric keypads to select the desired wash cycle. Refer to Table 11. Cycle Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Cycle Name Permanent Press Light Soil Light Soil Permanent Press Medium Soil Medium Soil Permanent Press Heavy Soil Heavy Soil Rags Reclaim Delicates 95°C 60°C 40°C 95°C Permanent Press 60°C Permanent Press 40°C Permanent Press 70°C Permanent Press 50°C Gentle 30°C Gentle Custom #1 Custom #2 Custom #3 Custom #4 Custom #5 Custom #6 Custom #7 Custom #8 Custom #9 Custom #10 Custom #11 Custom #12 Table 11 32 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232156 Basic Installation/Operation Models Equipped with Both Steam and Electric Heating (UniLinc and M30 Controls) 1. To switch between the heating type, locate the switch on the left side of control module. Refer to Figure 17. 2. To select steam heat, make sure the switch is in the down position. OR To select electric heat, make sure the switch is in the up position. PHM784N PHM784N Figure 17 F232156 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 33 Basic Installation/Operation UW Models with S-Control 4. Load the machine to full capacity whenever possible. DO NOT OVERLOAD. 1. Turn on the main power source (circuit breaker or cut-off switch on the wall). 2. Use left hand to press and hold the Door Unlock button located on the lower right front of the control panel. Refer to Figure 18. WARNING MACHINE MAY BE HOT AND CAUSE BURNS ATTEMPT NO ENTRY UNTIL BASKET HAS STOPPED SERIOUS INJURY MAY RESULT PHM590N Figure 20 CAUTION MD003J Figure 18 3. Use right hand to turn door handle clockwise, and swing the door left to open. Refer to Figure 19. Be careful around the open door, particularly when loading from a level below the door. Impact with door edges can cause personal injury. SW025 NOTE: When washing items which may disintegrate or fragment, such as mop heads or sponges, use laundry nets to prevent drain blockage. 5. Close door and turn handle counterclockwise. Door will lock automatically. CAUTION Check the door safety interlock daily before the machine is placed in operation. SW024 MD004J Figure 19 34 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232156 Basic Installation/Operation 6. Add dry supplies to the supply dispenser compartment cups prior to the start of each cycle. Liquid supplies can be injected directly into the supply dispenser by an external chemical supply system. NOTE: Supply dispenser compartment cups must not be removed when an external chemical injection supply system is attached to the washerextractor. NOTE: Press keypads at their centers just hard enough to activate them. 8. Cycle is complete when display reads “donE”. NOTE: A cycle can be stopped at any time by pressing the Stop keypad. 7. Press the Up or Down keypad until the desired cycle number is displayed. Press the Start keypad to start the cycle. To display the temperature of the water while cycle is running, press the Up keypad. To display the number of the cycle in progress, press the Start keypad. F232156 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 35 Basic Installation/Operation UW Models with P-Control WARNING Pre-Operating Instructions 1. Turn on the main power source (circuit breaker or cut-off switch on wall). Models with the rotation sensor will display WE-6 Firmware ID Code “HRWC18” and later (i.e., “HRWC19”) after power up. For models without rotation sensor, proceed to step 1 of Operating Instructions. 2. Display shows size of machine and will flash “TEST?” and “SPEED” for 15 seconds. 3. Push Start keypad during the 15 seconds. Machine will test rotation sensing for 15 seconds. 4. Display will flash “POWER” and “WAIT” one time and will display “NEXT00.” Do not operate machine in a cycle with program keymode switch in program position. Program keymode switch must be in run position at all times, except when editing or programming cycle or setup information. W528 3. On UW35 – UW125 models, use right hand to turn door handle clockwise and swing the door left to open. Refer to Figure 22. UW35 – UW125 MODELS NOTE: If START keypad is not pushed while display flashes “TEST?” and “SPEED” or if rotation sensing fails, then display flashes “POWER” and “WAIT” before showing “NEXT00” for approximately 2 minutes. Operating Instructions 1. When display shows “NEXT00,” washerextractor is ready to be loaded with laundry. 2. On UW35 – UW125 models, use left hand to press and hold the door unlock button located on the lower right front of the control panel. Refer to Figure 21. UW35 – UW125 MODELS MD004J Figure 22 MD003J Figure 21 36 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232156 Basic Installation/Operation 4. On UW150 models, use left hand to press and hold the door unlock button located on the door box. Refer to Figure 23. UW150 MODELS 6. Load the washer-extractor to full capacity whenever possible, but do not exceed the rated dry-weight capacity of the machine if the fabric to be washed is quite dense, closely woven, and heavily soiled. Overloading can result in an inferior wash. The operator may need to experiment to determine load size based on fabric content, soil content, and level of cleanliness required. Do not underload the machine. Underloading can result in premature bearing and sealing failure and out-of-balance situations. WARNING MACHINE MAY BE HOT AND CAUSE BURNS ATTEMPT NO ENTRY UNTIL BASKET HAS STOPPED SERIOUS INJURY MAY RESULT PHM597N PHM590N Figure 23 5. On UW150 models, use right hand to turn door handle counterclockwise and swing the door right to open. Refer to Figure 23. F232156 Figure 24 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 37 Basic Installation/Operation CAUTION Be careful around the open door, particularly when loading from a level below the door. Impact with door edges can cause personal injury. SW025 NOTE: When washing items which may disintegrate or fragment, such as mop heads or sponges, use laundry nets to prevent drain blockage. IMPORTANT: To prevent out-of-balance conditions, premature wear or damage to machine when using laundry nets, use several small nets in a load. 7. When loading is complete, ensure that all fabric is inside the basket. Then close and lock the door. 8. Add dry supplies in the supply dispenser compartment cups prior to the start of each cycle. Liquid supplies can be injected directly into the supply dispenser by an external chemical supply system. NOTE: Supply dispenser compartment cups must not be removed when an external chemical injection supply system is attached to the washerextractor. 9. Find the cycle number of the desired wash cycle. Cycle numbers must be two-digit numbers from 01 to 39. NOTE: Press keypads at their centers just hard enough to activate them. As the cycle proceeds, the display will show the function being executed, the step number, and the cycle number selected. Pressing the Edit Cycle keypad while the cycle is running will cause the display to show the remaining cycle time in minutes. Pressing this keypad again will return the display to normal. To begin the cycle at any step other than the first step, press the Advance keypad to advance through the cycle to the desired starting point. (The Advance keypad is enabled at the factory and can be disabled at the laundry site.) Then press the Start keypad. It is possible to skip to the next step in a cycle, with the exception of a drain step: drain steps must be allowed time to complete. When the display shows the step desired to begin the cycle, press the Start keypad. If the door is not locked, the display will indicate “CLOSE” and “DOOR.” If this occurs, be sure the door is closed and locked and press the Start keypad again. If the LED indicator lights for the control outputs indicate that one or more outputs are activated but the washer-extractor is not functioning according to the output or outputs indicated, contact a service technician. As water fills the washer-extractor, one or more of the indicator lights located to the left of the keyboard will come on and stay on until the required water level is reached. LED dots located immediately above the last three digits on the right of the control display will illuminate to indicate the water level(s) reached: • When the indicator dot above the last digit on the right is lit, the low water level has been reached. • When the dot above the next-to-the-last digit is lit, medium water level (optional) has been reached. • When the dot over the third digit from the right has been lit, high level has been reached. Press the numbers desired on the keyboard and note that these numbers are displayed after “NEXT.” When keypads are pressed on the keyboard, a signal will be heard. If an error is made, press the numbers again. As numbers are entered, they move from right to left on the display. 11. The cycle will continue until its completion. Then the display will read “DONE.” 10. To start the selected cycle, press the Start keypad. If the selected cycle number is not in the control memory, the display will show “NCYC.” If this happens, select another cycle. Otherwise, the display will now show the first step. For example, if the display reads “HL01,” “HL” represents a hot fill to low level, and “01” indicates that this is the first step of the cycle. 38 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232156 Basic Installation/Operation UW Models with A-Control 1. When display shows “Cyxx,” washer-extractor is ready to be loaded with laundry. 2. Use left hand to press and hold the door unlock button located on the lower right front of the control panel. Refer to Figure 25. 1 2 3 4 5 6 4. Load the washer-extractor to full capacity whenever possible, but do not exceed the rated dry-weight capacity of the machine if the fabric to be washed is quite dense, closely woven, and heavily soiled. Overloading can result in an inferior wash. The operator may need to experiment to determine load size based on fabric content, soil content, and level of cleanliness required. Do not underload the machine. Underloading can result in premature bearing and sealing failure and outof-balance situations. WARNING MACHINE MAY BE HOT AND CAUSE BURNS ATTEMPT NO ENTRY UNTIL BASKET HAS STOPPED SERIOUS INJURY MAY RESULT < < PHM626N Figure 25 3. Use right hand to turn door handle clockwise and swing the door left to open. Refer to Figure 26. PHM590N Figure 27 WARNING Do not operate machine in a cycle with program keymode switch in program position. Program keymode switch must be in run position at all times, except when editing or programming cycle or setup information. W528 WARNING Do not operate machine in a cycle or if spinning with program keymode switch in program position. W529 PHM593N Figure 26 F232156 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 39 Basic Installation/Operation Liquid supplies can be injected directly into the supply dispenser by an external chemical supply system. CAUTION Be careful around the open door, particularly when loading from a level below the door. Impact with door edges can cause personal injury. NOTE: Supply dispenser compartment cups must not be removed when an external chemical injection supply system is attached to the washerextractor. SW025 NOTE: When washing items which may disintegrate or fragment, such as mop heads or sponges, use laundry nets to prevent drain blockage. IMPORTANT: To prevent out-of-balance conditions, premature wear or damage to machine when using laundry nets, use several small nets in a load. 5. When loading is complete, make sure that all fabric is inside the basket. 6. Close and lock the door. 8. The default wash cycle will display. If desired, select a different cycle at this point. 9. Press the Start keypad. NOTE: The cycle number can be changed during the FIRST FILL ONLY by pressing another cycle select key. At the conclusion of the cycle, the display will show ‘doNE’. The door can be unlocked. At this point the washer-extractor may be unloaded. When the door is opened, the display will revert to showing “----” and the default cycle. 7. Dry supplies can be placed in the supply dispenser compartment cups prior to the start of each cycle. 40 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232156 Basic Installation/Operation UW Models with B-Control 1. When display shows “----,” washer-extractor is ready to be loaded with laundry. 2. Use left hand to press and hold the door unlock button located on the lower right front of the control panel. Refer to Figure 28. 4. Load the washer-extractor to full capacity whenever possible, but do not exceed the rated dry-weight capacity of the machine if the fabric to be washed is quite dense, closely woven, and heavily soiled. Overloading can result in an inferior wash. The operator may need to experiment to determine load size based on fabric content, soil content, and level of cleanliness required. Do not underload the machine. Underloading can result in premature bearing and sealing failure and outof-balance situations. WARNING NORMAL HOT PERM PRESS MACHINE MAY BE HOT AND CAUSE BURNS HOT ATTEMPT NO ENTRY UNTIL BASKET HAS STOPPED SERIOUS INJURY MAY RESULT WASH LIGHT SOIL ADD BLEACH VISA TM HOT WARM HEAVY SOIL UNIFORMS RINSE SPIN DOOR START HOT STAINED HOT HOT DELICATE COLD PHM601N Figure 28 PHM590N 3. Use right hand to turn door handle clockwise and swing the door left to open. Refer to Figure 29. Figure 30 WARNING Do not operate machine in a cycle with program keymode switch in program position. Program keymode switch must be in run position at all times, except when editing or programming cycle or setup information. W528 WARNING Do not operate machine in a cycle or if spinning with program keymode switch in program position. W529 PHM593N Figure 29 F232156 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 41 Basic Installation/Operation CAUTION Be careful around the open door, particularly when loading from a level below the door. Impact with door edges can cause personal injury. SW025 NOTE: When washing items which may disintegrate or fragment, such as mop heads or sponges, use laundry nets to prevent drain blockage. IMPORTANT: To prevent out-of-balance conditions, premature wear or damage to machine when using laundry nets, use several small nets in a load. 5. When loading is complete, make sure that all fabric is inside the basket. 6. Close and lock the door. 8. Liquid supplies can be injected directly into the supply dispenser by an external chemical supply system. NOTE: Supply dispenser compartment cups must not be removed when an external chemical injection supply system is attached to the washerextractor. 9. Select the desired cycle. The corresponding LED indicator for that cycle will light. 10. Press the Start keypad. NOTE: The cycle number can be changed during the FIRST FILL ONLY by pressing another cycle select key. 11. At the conclusion of the cycle, the display will show ‘doNE’. The door can be unlocked. At this point the washer-extractor may be unloaded. 12. When the door is opened, the display will revert to showing “----” and the default cycle. 7. Dry supplies can be placed in the supply dispenser compartment cups prior to the start of each cycle. Be sure to return the supply dispenser compartment cups before the start of each cycle. 42 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232156 Basic Installation/Operation Disposal of Unit This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Refer to Figure 31. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Ensuring this product is disposed of correctly will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact the local city office, household waste disposal service, or the source from which the product was purchased. F232156 MIX1N Figure 31 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 43
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Description : F232156R9 Title : Basic Installation/Operation for CE Pocket Hardmount Washer-Extractors Creator : Alliance Laundry Systems Producer : Acrobat Distiller 9.3.0 (Windows) Copyright : ? Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT Creator Tool : FrameMaker 9.0 Modify Date : 2010:04:13 15:30:47-05:00 Create Date : 2010:04:13 15:08:09Z Metadata Date : 2010:04:13 15:30:47-05:00 Document ID : uuid:a705d911-38de-449e-815b-902252933b41 Instance ID : uuid:b3db9c95-dd73-4bdd-9fa0-5110284e831d Page Layout : SinglePage Page Mode : UseNone Page Count : 45 Author : Alliance Laundry Systems Subject : F232156R9EXIF Metadata provided by EXIF.tools