Alpha Arsenal EXPRESSGSM1 Express GSM 433 Tx/Rx Base Unit ExpressGSM1 User Manual

Alpha Arsenal LLC Express GSM 433 Tx/Rx Base Unit ExpressGSM1

User Manual

User manual
2
Dear customer!
Thank you for choosing our product. The efforts of different specialists of “Siberian Arsenal”
scientific production association were put into creation of the modern high-quality technical security
devices.
Please look through this manual so that the device could serve for a long time and failure-
free. In case you have any wishes or comments please use contact information given at the end of
manual. We appreciate your opinion.
This user’s manual is intended for mounting and maintenance of GSM motion detector
«EXPRESS GSM».
The motion detector is designed to detect human movement within the protected premises
and inform the user by GSM network about this. Protection mode is turned on/off by using the
remote controller. The battery provides continuous operation of motion detector with a daily turning
on/off the protection mode, from 6 to 12 months.
Telephone number of the GSM motion detector SIM card:
3
Have you ever thought that set the alarm is expensive and troublesome, we also thought so!
Now everything has become much easier. If you decide to protect yourself from the troubles, it
would take only 10 minutes!
Be sure you can handle easily!
You rent a flat, and have no possibility to equip it with alarm. Set up the EXPRESS. When
you move you can easily take it with you!
In summer period burglaries become more frequent. You do not want to get into this unhappy
statistics, but want to relax in the countryside. Set up the EXPRESS and relax with peace of mind!
You build a house or a flat, no guard yet, but the valuables are already there. Set up
temporarily the EXPRESS!
You think your colleagues look at your table (cabinet). Follow up question by the EXPRESS!
You already have protection with security office, but you think they could come to you when
you are absent. Set up the EXPRESS and be sure!
EXPRESS does not detect the movement of people through the glass, so the false alarms
are impossible. Put it on a seat in the car when you leave to the store or to work!
You are a builder and your facility has cabins and rooms, where you store valuables,
construction equipment. Set up the EXPRESS!
There is a watchman In your cottage community, negotiate with your neighbors and organize
a real security, let the calls and SMS of the "Alert" come to the watchman and to you. Set up the
EXPRESS!
If you have reason to worry for the safety of your property, set up the EXPRESS GSM!
4
Settings
For setting motion detector you will need:
- SIM card with balance. PIN code request should be disabled;
- Mobile telephone;
- Remote controller;
- motion detector;
- Battery.
For your ease you should record motion detector SIM card telephone number into your
telephone book, for example «Cottage guard». Then in case you get alarm message, you will not
guess who sent it.
Helpful recommendations
1. Before operation in winter in unheated rooms it is desirable to install a new battery.
2. When replacing the battery installed options are remained.
3. It is advisable to use new SIM card for installation to motion detector.
4. It is desirable that the mobile operator of motion detector and your mobile operator
coincide. This will speed up the transfer of SMS messages
5. Use tariff rate with the lowest cost of SMS messages.
6. Motion detector memory can store up to 6 remote controllers and up to 6 telephone
numbers for warning.
7. Make sure that the place of motion detector installation has coverage area of cellular
communication.
8. Receive or not receive the SMS with notification about turning on/off the protection
5
!
mode? Just change the jumper setting (see page 7).
9. Every 7 days you will receive test SMS messages with balance.
10. If you did not manage to record remote controller in motion detector’s memory or call
the number of motion detector within defined period, remove the battery from the motion detector,
wait 2-3 minutes. Then insert the battery observing the polarity, wait 30 seconds and record the
remote controller or call motion detector number.
11. In case you changed SIM card, you should repeat the setting.
12. If you can not set the motion detector, make sure that
- SIM card is installed correctly (see page 7);
- jumper is in position 1 or 2 (see page 7);
- the battery is installed with the correct polarity.
13. For more information you can read the manual on the site www.arsenal-npo.ru, in the
Documentation section.
Remember! The battery has a limited resource, so please use the economy mode.
Attention! DO NOT REMOVE the SIM card when battery is installed.
6
For the initial setup of motion detector please follow several simple operations.
1
1.Remove the screw at
the bottom part.
2. Remove the motion
detector cap.
7
!
2
Insert the SIM card into its
holder. Set the jumper in
position 1 or 2.
1. Normal mode. Set the
jumper to the "S" position. You
will receive SMS informing
about turning on/off the
protection mode. Protection
mode can be turned off by
remote controller in any time.
2. Economy mode. Remove
the jumper. You will not
receive SMS informing about
turning on/off the protection
mode. Turning off the
protection mode will be
possible after you get to
detection zone.
3. GSM LED (Light-emitting
diode).
If the SIM card was used in the motion detector earlier, erase phone book. For this,
please set the jumper to the "R" position, then MUST WAIT FOR 1 MINUTE and install
the battery, observing polarity. Wait for the beep noise finish. Erasing completed.
Remove the battery. Set the jumper in position 1 or 2.
8
3
Insert the battery into the
motion detector slot observing
polarity.
At power-up, an audible
beep sounds. Then three short
beeps sound and the LED
winks 1 time in 5 seconds.
WARNING!
Within 30 seconds after
this you should record a
phone number in motion
detector memory (see next.
page).
9
4
After 3 short beeps sound,
during 30 seconds you should
send SMS with your cell
phone number to motion
detector SIM card number in
format: 1)+XXXXXXXXXX,
where 1) – index number,
XXXXXXXXXXX – your cell
phone number in international
format
Your phone number will be
set as the main for alert alarm,
turning off/on the protection
mode, and also for settings
change. The motion detector
will hang up itself.
Motion detector memory
can store up to 6 telephone
numbers for warning.
WARNING! Within 30
seconds you should record
the remote controller into
the motion detector
memory.
10
!
5
Since the end of the call,
you have 30 seconds to press
briefly the remote controller
button. After pressing it, the
motion detector will record
remote controller in it’s
memory. During recording, the
LED alternately winks red and
green. After recording one
beep noise will sound.
You can switch on and off
protection mode using the
remote controller.
This way you can record up
to 6 remote controllers.
In case of alarm, the owner of the recorded phone number can remotely switch
off the motion detector. For this you should call the motion detector number
within 30 seconds after alarm message received. Otherwise, if the alarm repeats,
you will receive alarm message again after 2-3 minutes.
11
6
1. Close the motion
detector cap.
2. Tighten the screw at
the bottom of the hull.
12
!
Within 30-40 seconds a service SMS with installed settings will be received at your mobile
phone (which number was saved in motion detector SIM memory). These settings may be changed
in the future.
More detailed information about additional settings of the signalizator is
available in operating manual at www.express-gsm.info in Documentation
section. In Video section there is a video demonstrating the whole setting
process.
13
Installation
Put the motion detector into the place, where it will be protected from exposing to
atmospheric precipitation, mechanical damages and access of unauthorized persons.
The motion detector should be placed such a way that makes a protected zone well within
view. Recommended height for installation is 2.0-2.5 m.
Detecting range of human entry the protected zone is not exceeding 10 meters.
The motion detector shouldn’t be installed near the powerful heat source (fireplace, stove,
conditioner, heating radiator etc.), in the places with strong air flow or exposed to direct sun rays.
14
The wall with motion detector shouldn’t receive heavy vibration.
Presence of some objects (furniture, screens, plants etc.) in the protected zone makes “blind“
zones behind them and motion detector may not detect human pass such zones.
Presence of animals and birds in the protected zone may lead to false alarm.
Detecting zones are shown in the picture below.
Use bracket or double-sided adhesive to fix motion detector on the wall.
15
Motion detector functional Test
After installation of the motion detector it is necessary to test its functionality. Use the first
and the second testing methods for common mode and the third and the fourth testing methods for
economy mode.
The first method (jumper is put in “S” position).
1. Press remote controller button. Remote controller LED should wink red. Beep will
sound every 4 seconds during 60 seconds (total about 15 times). It is need to leave
the protected zone during this period.
2. Wait for receiving SMS with text “Protection mode is on by remote controller #1”.
3. Wait more 2-3 minutes and enter the protected zone.
4. Wait for receiving SMS with text “Alarm” and incoming call.
5. Dial the motion detector number.
6. Wait for receiving SMS with text “Protection mode is off by call +XXXXXXXXXXX».
The second method (jumper is put in “S” position).
1. Leave the protected zone.
2. Press the remote controller button. Remote controller LED should wink red.
3. Wait for receiving SMS with text “Protection mode is on by remote controller #1”.
4. Wait more 2-3 minutes. Press remote controller button. Remote controller LED will
wink green.
5. Wait for receiving SMS with text “Protection mode is off by remote controller #1”.
The third method (jumper is put off).
1. Press remote controller button. Remote controller LED should wink red. Beep will
16
!
sound every 4 seconds during 60 seconds (total about 15 times). It is need to leave
the protected zone during this period.
2. Leave the protected zone.
3. Wait 2-3 minutes. Enter the protected zone.
4. Wait for receiving SMS with text “Alarm” and incoming call.
5. Press remote controller button.
6. Wait for beep sounds twice.
The fourth method (jumper is put off).
1. Leave the protected zone.
2. Press remote controller button. Remote controller LED should wink red.
3. Wait 2-3 minutes. Enter the protected zone.
4. Wait for beep sounds once.
5. Press remote controller button. Remote controller LED will wink green.
6. Wait for beep sounds twice.
Attention! In economy mode the remote controller functions only after
EXPRESS has detected You.
17
Turning On/Off the Protection Mode
Protection mode is turned on\off by remote controllers, registered in motion detector
memory. Remote controllers covering distance is up to 15 m.
In order to turn on the protection mode press remote controller button. Remote controller
LED lights yellow while waiting for the motion detector response. Wait till remote controller LED
winks red. After 40 seconds motion detector will turn on the protection mode. During this period
beep will sound every 4 seconds.
In order to turn off the protection mode press remote controller button. Remote controller
LED will light yellow. After the motion detector turns off the protection mode remote controller LED
will wink green.
After the protection mode is turned on/off SMS with text “Protection mode is on” or
“Protection mode is off” will be directed to Your mobile number (if jumper is put in “S” position).
If press remote controller button several times before SMS informing about turning on/off
the protection mode is sent, SMS will contain the last event.
Actions in Case of Alarm
If someone enters a protected zone while motion detector is in protection mode, motion
detector will send SMS with text “Alarm” to your mobile number. After that it will dial your number
and will be waiting for incoming call during 30 seconds to turn off the protection mode. When a call
comes, motion detector will refuse it and send SMS with text “Protection mode is turned off by call
”. In case of alarm it is also possible to turn off the protection mode by remote
controller. Human appearance detection range is up to 10 meters.
18
Specifications
Feature Value
Human appearance detection range, not less 10 m
Radio remote controller maximum covering distance 15 m
GSM module standard GSM-900/1800/1900
Maximum quantity of telephone numbers for warning 6
Maximum quantity of radio remote controllers for turning on/off protection
mode 6
Warning period 10 - 40 s
Battery type Li Battery CR123A
3,0 V
Operating temperature range -10…+5*
Relative air humidity at +35 °, without moisture condensation, not more 93%
Motion detector operating time with one battery at +25 °, not less 6 months
Remark -
*
from -25 ° with shortening of operating time
19
Package Contents
Code Name and designation Qty
SAPO.425152.029 GSM motion detector 1
SAPO.734328.001 Bracket 1
SAPO.734328.002 Holder 1
Self-tapping screw 3x6 GOST11621-80 1
Double-sided adhesive 1
SAPO.425718.009 Radio remote controller BN-1-S 1
Li Battery CR123A 3,0 V 2
SAPO.425152.030 User manual 1
Contact Details
SP «Siberian
Arsenal»
Service center
Russia, 630073,
Novosibirsk,
Gorskiy microdistrict, 8a
tel.: +7 (383) 211-29-63
fax: +7 (383) 301-44-33
e-mail: manager1@express-gsm.info
web: www.express-gsm.info
e-mail: support@arsenalnpo.ru
Skype: express_us
Alpha Arsenal
LLC
USA, 11375
Suite #1-B, 104-20 Queens Blvd.,
New York, NY
tel.: +1 718-825-6292
fax.: +1 718-440-3281
e-mail: manager1@express-gsm.info
web: www.express-gsm.info
20
Warranty
Warranty period is one year.
During this period manufacturer is to repair, change or adjust at option failed product for free.
Warranty doesn’t cover the products with mechanical damages, traces of repairing by one’s own or
other signs of abuse.
Warranty doesn’t cover the battery.
Warranty period starts from the day of purchasing the product. The absence of sale record
relieves from warranty.
Date of sale: Seller name: Seal
_____________ ____________________________ ________
Test Certificate
Product “EXPRESS GSM” corresponds to the design documentation and is recognized as
ready for operation.
Release date: QC
_______________ ________________
21
FCC Information
This device complies with Part 15 of the FCC Results. Operation is subject to the following
two conditions:
This Device may not cause harmful interface, and
This device must accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for digital device,
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try correct the
interference by one or more of the following measures:
1.1. Reorient or relocate the receiving antenna.
1.2. Increase the separation between the equipment and receiver.
1.3. Connect the equipment into an outlet on a circuit different from
that to which receiver is connected.
1.4. Consult the dealer or experienced radio/TV technician for help.
WARNING
Changes or modifications not expressly approved by the manufacturer could void the user's
authority to operate the equipment.
22
The FCC approved GSM module is used in this mobile/fixed application. The antenna (with required
gain in its certification) used for the GSM transmitter must be installed to provide a separation
distance of at least 20 cm from all persons in order to satisfy RF exposure compliance for the final
host device.
Trademarks
This agreement doesn’t grant you any rights to trademarks or service marks of the
“Siberian Arsenal”.
Disclaimer
Under no circumstances the manufacturer is not responsible for the loss of confidential
and other information, violation of privacy, actions or omissions of third parties, careless attitude to
the instrument, mishandling, precautions and other losses and damages caused as a result of
owning and operating this product.
Battery element
Warranty service doesn’t cover the batteries that are included in the kit.

Navigation menu