Amber Innovation A003S Smart power bank User Manual Exhibit 08 Users Manual
Amber Innovation Smart power bank Exhibit 08 Users Manual
Exhibit 08 Users Manual
A003S User’s Manual A003S is a smart power bank. It has 4200mAh Li-ion rechargeable battery and could be used to charge your mobile phone or other electronic devices when their batteries are low. It is also a Bluetooth Low Energy proximity tag. It could connect with your mobile phone through Bluetooth Low Energy. When A003S is separated from your mobile phone, both sides will generate sound alert. LED button Torch Charge other device Output Power Input Plug in the charging cable of your mobile phone into the output socket. Press the button once and it will start to charge your phone. Charge itself Plug in the accompanied cable into the input socket. Plug the other end to any power source which has USB port. A blue led will start to flash once it starts to charge. When the charge is complete the led will stop flashing. Turn on the torch Hold the button until you see the torch is on. Hold the button again until the torch is off. Turn on the Bluetooth® Before you connect your phone with A003S through Bluetooth®, you need to wake up the Bluetooth in A003S. You just flip A003S and you will see a blue led flashing. FCC Information This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. Federal Communications Commission (FCC) Statement This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. Tested to comply with FCC standard. FOR HOME OR OFFICE USE. Warning : This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. & This device and its antenna(s) must not be co-located or conjunction with any other antenna or transmitter
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 1 Language : zh-CN Tagged PDF : Yes Author : 刘杰 Creator : Microsoft® Office Word 2007 Create Date : 2013:11:25 15:48:08+08:00 Modify Date : 2013:11:25 15:48:08+08:00 Producer : Microsoft® Office Word 2007EXIF Metadata provided by EXIF.tools