Arada Systems MAXR-950 Highpower USB WiFi Module User Manual MaxR 950

Download:
Mirror Download [FCC.gov]
Document ID	1779669
Application ID	76Xbq6JyEAcyCPulCZM7bQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	14.46kB (180762 bits)
Date Submitted	2012-08-30 00:00:00
Date Available	2013-02-27 00:00:00
Creation Date	2012-08-30 17:14:48
Producing Software	Microsoft® Word 2010
Document Lastmod	2012-08-30 17:14:48
Document Title	Microsoft Word - MaxR 950_User Manual
Document Creator	Microsoft® Word 2010
Document Author:	Hoang

OEM INTEGRATION GUIDE
Product Overview
The MaxR 950 is a Hi-Power USB dongle
complies with the IEEE 802.11 specification to
communicate with other 802.11 wireless
devices in 2.4 GHz, and in the 4.9 GHz band, up
to 65 Mbps
Packing Contents
The USB dongle package contains the following
item (s):
1 x Wireless USB Dongle
Installation Guide
•
•
•
•
•
Product Specification
•
•
Ad host supported
Infrastructure ( Access Point )
supported
• Linux Driver
• Operating Temperature : -20C to 70C
Radio shall be sufficiently shielded to prevent
emission/reception of EMI to / from host
Easy installation and use
System Requirement
PC compatible laptop with one available USB
2.0 bus-power port
Windows XP with SP2 or later, Windows Vista or
Windows 7
Shut down the power of the platform.
Align the dongle with the USB 2.0 port
and adjust until the LED power off.
Connect the antenna(s) on the USB
dongle.
Reboot on the platform
Install drivers if necessary
Product Features
•
•
•
•
•
•
•
•
•
•
2.4 GHz ISM ( Industrial , Science ,
Medical ) band operation
4.9 GHz Public Safety band operation
USB 2.0 PHY, high speed client device
Two antenna ports
(Design support single antenna with
one
port
left
unconnected
/unterminated)
Transmit power , average : 24 dBm, +/2 dB, measure at the TX Port
Radio Interoperability : 802.11a /g
OFDM
Antenna Interface: MMCX
Channel Bandwidth : 5 MHz – 20 MHz
Mesh support : 802.11s
The device operates continuously in the
2.4 GHz or 4.9 GHz band ( not both at
the same time)
Host Device Labeling
The outside of the host device into which the
MaxR 950 module is installed must display a
label referring to the enclosed module. This
exterior label can use wording such as the
following: “Contains Transmitter Module FCC
ID: “XZB-MAXR-950” or “Contains
FCC ID: XZB-MAXR-950.” Any similar wording
that expresses the same meaning may be used.
The host OEM user manual must also contain
clear instructions on how end users can find
and/or access the module.
Regulatory Information
FCC Statement
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential
installation.
This
equipment
generates uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by
one of the following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
To assure continued compliance, any changes
or modifications not expressly approved by the
party responsible for compliance could void the
user’s authority to operate this equipment.
FCC Radiation Exposure Statement
This equipment complies with the FCC RF
radiation exposure limits set forth for an
uncontrolled environment. This equipment
should be installed and operated with a
minimum distance of 20 centimeters between
the radiator and your body.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and
(2) This device must accept any interference
received, including interference that may cause
undesired operation.
This transmitter must not be co-located or
operating in conjunction with any other
antenna or transmitter.
The antennas used for this transmitter must be
installed to provide a separation distance of at
least 20cm from all persons and must not be
located or operating in conjunction with any
other antenna or transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 2
Language                        : en-US
Title                           : Microsoft Word - MaxR 950_User Manual
Author                          : Hoang
Creator                         : Microsoft® Word 2010
Create Date                     : 2012:08:30 17:14:48-07:00
Modify Date                     : 2012:08:30 17:14:48-07:00
Producer                        : Microsoft® Word 2010

EXIF Metadata provided by EXIF.tools