Arada Systems MAXR552-4 Wireless module User Manual Statement Fully Modular Approval

Download:
Mirror Download [FCC.gov]
Document ID	2693183
Application ID	cVElxOFJpCMpV2pdmgYTuQ==
Document Description	Users Manual (Statement).pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	1.25kB (15584 bits)
Date Submitted	2015-07-27 00:00:00
Date Available	2015-07-27 00:00:00
Creation Date	2015-07-07 16:33:27
Producing Software	GPL Ghostscript 9.04
Document Lastmod	2015-07-08 13:26:18
Document Title	Statement-Fully Modular Approval
Document Creator	PDFCreator Version 1.2.3
Document Author:	aihsu

Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the
antenna and users, and
2) The transmitter module may not be co-located with any other transmitter
or antenna.
As long as 2 conditions above are met, further transmitter test will not be required.
However, the OEM integrator is still responsible for testing their end-product for any
additional compliance requirements required with this module installed
IMPORTANT NOTE: In the event that these conditions can not be met (for example
certain laptop configurations or co-location with another transmitter), then the FCC
authorization is no longer considered valid and the FCC ID can not be used on the
final product. In these circumstances, the OEM integrator will be responsible for
re-evaluating the end product (including the transmitter) and obtaining a separate FCC
authorization.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may be
installed such that 20 cm may be maintained between the antenna and users. The final
end product must be labeled in a visible area with the following: “Contains FCC ID:
XZB-MAXR552-4”. The grantee's FCC ID can be used only when all FCC
compliance requirements are met.
Manual Information To the End User
The OEM integrator has to be aware not to provide information to the end user
regarding how to install or remove this RF module in the user’s manual of the end
product which integrates this module.
The end user manual shall include all required regulatory information/warning as
show in this manual.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2015:07:07 16:33:27+08:00
Creator Tool                    : PDFCreator Version 1.2.3
Modify Date                     : 2015:07:08 13:26:18+08:00
Metadata Date                   : 2015:07:08 13:26:18+08:00
Format                          : application/pdf
Description                     : 
Creator                         : aihsu
Title                           : Statement-Fully Modular Approval
Keywords                        : 
Producer                        : GPL Ghostscript 9.04
Document ID                     : uuid:220dda41-74f6-41c4-9e87-4dee4c71f73b
Instance ID                     : uuid:8a0a4cc0-5811-4c45-82cb-3ef40a326889
Page Count                      : 2
Subject                         : 
Author                          : aihsu

EXIF Metadata provided by EXIF.tools