Archos AN8G3 ARNOVA 8 G3 User Manual

Archos SA ARNOVA 8 G3

a href="https://usermanual.wiki/Archos" itemprop="url"> Archos >

user manual

▲!1ENGLISHSTARTING UPInstallation WizardThe first time you start up your ARNOVA, the installation wizard will bring you through a few screens to help you set up the principal settings: language, country, time, etc. Before using your ARNOVA for the rst time, completely charge the battery!1.  Connect the supplied power cable to the ARNOVA and to a wall outlet.2.  The ARNOVA device will turn on and start charging.  The Power indicator light is red while the battery is charging.  It will turn green when the battery is fully charged.Charging the Battery
2???78912 1113 1014 2356ENGLISHDESCRIPTION OF THE DEVICE1.  On/Off button: enables to turn on or turn off the device. 2.  Micro-SD card slot3.  Micro-USB port - to charge the battery of your ARNOVA  - to connect your ARNOVA to your computer, using the included USB cable 4.  Headphone jack 5.  Hardware Reset: in the event that your ARNOVA freezes operation, you can press the “pinhole reset” button by using a sharp object such as a toothpick. 6.  Charging indicator - red: battery charging  - green: battery charged. 7.  Camera8.  Loudspeakers9.   Home - return to the Home screen.              10.   Search                            11. Volume buttons 12.   Menu - gives menu options according to the current screen.   13.   Back-returns to the previous screenIMPORTANT:  Your device is frozen.You can turn it off. Press the ON/OFF button  1 for 10 seconds or press the reset button  5.
3wwwENGLISHCONNECTING TO THE WIFI NETWORKFor this procedure to work, you need to be in a WiFi zone that will allow you to connect to it. Every time the ARNOVA is in range of a network that you have already configured once, it will attempt to make a connection.* For free access WiFi points, there is no need to enter any special information. For secured networks, you will need either a key (a series of numbers and/or letters) of the type WEP, WPA, or WPA2. To obtain the exact connection parameters required, contact the Internet service provider.How to congure a WiFi networkFrom the status bar, at the bottom right hand of the screen, you can access the WiFi settings quickly.1.  Touch the time in the status bar. The status dashboard is displayed.2.  Touch the time in the status dashboard. The setting dashboard is displayed below.3.  Touch WiFi to open the WiFi settings.4.  If the WiFi is off, slide the WiFi switch to the On position.  Once the WiFi is on, the ARNOVA will scan for available WiFi networks. Secured networks are indicated with a Lock icon. If the device finds a network that you connected to previously, it connects to it.5.  Touch the network you want to connect to. 6.  Enter the required network information* and touch Connect.  We recommend that you select Show password in order to be able to see the characters you are typing. Your ARNOVA will attempt to establish a connection to that WiFi access point.
Download:
Mirror Download [FCC.gov]
Document ID1669352
Application IDAeqLKY41PCxFMg6TGl5IaQ==
Document Descriptionuser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize111.79kB (1397414 bits)
Date Submitted2012-04-04 00:00:00
Date Available2012-10-01 00:00:00
Creation Date2012-03-09 18:07:38
Producing SoftwareAdobe PDF Library 9.9
Document Lastmod2012-03-30 11:33:31
Document Titleuser manual
Document CreatorAdobe InDesign CS5.5 (7.5)
FCC ID Filing: SOVAN8G3

Navigation menu