Arista Networks W68 Access Point/Sensor User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2431441
Application ID	S3vMXgcoOpyd5rPfk2lyww==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	22.65kB (283160 bits)
Date Submitted	2014-10-30 00:00:00
Date Available	2014-10-30 00:00:00
Creation Date	2014-10-30 18:52:28
Producing Software	PDF-XChange 3.60.0119 (Windows)
Document Lastmod	0000-00-00 00:00:00
Document Title	User manual

W-68 AirTight Access Point / Sensor
Quick Start Guide
Package Contents
You should have received the following componems in yourW-68 package
w-ss Mounting Bracket
Mounting Accessories
Mounting the w-68
Wall Mount: AirTigm logo facing away from me wall
Affix me moummq bracket on to the MM using me appvopviam screw; from the
mounting accessovies included in the package.
Canned the cables m the appmpnace polls in me yeareside onhe device.
Vou (an either use an R145 (onnenov or punchedown the (ables in me sackex.
Mount the device on the blade! and xighten it
wnh the mew pvovided in the package.
Getting the W768 Online
Step 1: Power up
If using POE, plug one end of the Ethernet cable into the POE switch or injector and
plug the other end into the Uplink (PoE) on the W68. Make sure the PoE source you
are using is turned ON.
OR
As an alternative to PoE, insert the power adapter plug into an AC power outlet and
the other end into the power input port on the W768.
Warning: If not using PoE, make sure you use only an AC power adapter supported
by the W68 access point (AP).
Step 2: Connect to the network
If you are using PoE, then the W768
should already be connected to your
network. If you are not using PoE,
then plug one end of the Ethernet
cable into an Ethernetjack on your
network and the other end into the
Uplink (PoE) on the W768.
C D
—
Step 3: Check the LED status _
-.
Wait for a few minutes till the :
Power LED and Uplink LED turn solid m .
GREEN, which indicates that the W768 m m e
is online and operational. in“:
um a
a... a
‘ MW e l
I .
Troubleshooting
After the W68 is powered ON and connected to Ethernet, if the status
of Uplink LED is not Solid Green, it indicates that the AP is not able to function
normally.The following guidelines may help you to quickly diagnoseand fix the problem.
LED Status
What does it mean?
Power (PWR) Upllnk 2.46 / 56
OH Norpoweredmrrrrrrrrheprrxesror
startlng up
Solid Green No active Ethernet llnkl
Solld Green Fast BllnkGreen Dld not recelve a valid IP address via DHCP]
Unable to connect to the Almgm Cloud
Servlces or AIrTight Server}
Solid Green Slow Blink Green Any
1. Make sure that the Ethernet cable is correctly plugged into the Uplink (PoE) port on
the W768 and the other end of the cable is plugged into an Ethernetjack or a port on
a switch that is turned ON.
2. If the W768 did not receive a valid IP address from the DHCP server, make sure that a
DHCP server is ON and available on the VLAN/subnet to which the AP is connected. If
the AP still fails to get a valid IP address, you can reboot it once to see if that resolves
the problem.
3. If you are using AirTight Cloud Services, make sure that Internet connectivity is
available from the VLAN/subnet to which the AP is connected. Check if the required
ports for AP and Server communication 7 UDP 3851 and default HTTP (TCP port 80)
r are open on the Firewall. If you are using a Proxy, Web accelerator or URL content
filtering, make sure the settings allow communication between the AP and AirTight
Cloud Services.
After following these guidelines, if you are still unable to resolve the problem, contact the
local AirTight Sales Engineer or 24/7 AirTight Technical Support.
Tel: +1 (650) 641 0027 Emal support@airtightnetworks.(om
Alr'light
Comprehensive Cloud-Managed Wi-Fi
AirTight Networks, Inc. 339 N. Bernardo Avenue #200, Mountain View, CA 94043
T +1.877.424.7844 T 650.961.1111 F 650.961.1169 www.airtightnetwmks.(nm infmaivtighlnetwovksxom
Allfight was arm Serup Gulde [Dot m: Amrosrngurnol room]
a 2m Alrl'lghl Networks, rue. Ali "ng reserved. AIrTIgM Networks and rlre Alfllght Networks logo are tmdemarkx, and Alrl'lghl .5 a leglxneled
tradelnalk ol Allilylu Newmlkc, inr All nrlvelrmrlerllmks malrnrmed iveleln are plopemecot rlralr lespenlve nwnelc Vierlfirzmolvs are warm to
(range wlthoul narree,
:2 Aerlght‘
Industry Canada Statement
This deyice complies With ass-210 ofthe lndustry Canada Rules. Operation is subiect to
lhefollowing two conditions: (1)This device may not cause harmful interference, and (2)
this deyice must accept any interference received, including interference that may cause
undesired operation.
Ce disposllifesl conforme a la norme (NR-210 d’lnduslrie Canada applicable aux appareiis
radio exempts de licence. Son fondlonnemem est suje\ aux deux conditions suivamesz (1)
ie disposilifne doit pas produire de hrouiiiage prejudiciahie, et (2) ce disposit‘if doit accepter
tout brouillage re , y compris un brouillage susceptible de proyoquer un fonctionnement
indeslrable.
ma MOBILE DEVICE USAGE (>10cm/low power)
Radiation Exposure Statement:
This equipment complies Wllh IC radiation exposure limits set forth for an uncontrolled
eninronmentThis equipment should be installed and operated Wllh a minimum distance
20cm between the radiator and your body.
Declaration d’exposition aux radiations:
Cet equipement est (onforme aux limites d’exposnion aux rayonnements lc etahiies pour un
envnonnement non controle. Cet equlpement doit @tre installe et utilise avec un minimum de
20 cm de distance entre la source de rayonnement et votre cmps.
:2 AIrTIght‘
Federal Communication Commission Interference Statement
This device complies with Part 15 ofthe FCC Rules. Operation is subiect to the following
two conditions: (1)Thls device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 ofthe FCC Rules. These limits are designed to provide
reasoable protedlon against harmful lnterferente In a residential lnstallatlon.Thls
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in a((ordan(e with the instructions, may (ause harmful Interference to radio
(ommunitations. However, there is no guarantee that lnterferente will not otcur In a
particular installation. lfthis equipment does cause harmful interference to radio or
teleVision reception,which can be determined by turning the equipmentoffand on, the
user is encouraged to tryto correct the interference by one ofthe following measures:
- Reorlent or relocate the receivmg antenna.
- lncrease the separation between the equipment and receiver.
, Connect the equipment into an outlet on a (limit dlfferent from that to Wl’llCl’l the
retelver is (onnetted.
- Consult the dealer or an experiented radio/TV tethnltian for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment.
This transmitter must not be co-located oroperating in conjunction With any other
antenna ortransmitter.
FOR MOBILE DEVICE USAGE (>20cm/Iow power]
Radiation Exposure Statement:
This equipment complies with rcc radiation exposure limits set forth for an uncontrolled
environment.This equipment should be installed and operated with a minimum distance
of 20cm between the radiator and your body.
FOR CDUNTRV CODE SELECTION USAGE (WLAN DEVICES)
Note1The (ountry (ode selettlon is for non-US models only and is not available to all US
models. Per FCC regulations, all W'i-F'i products marketed 'in the US must be fixed to US
operation channels only.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Producer                        : PDF-XChange 3.60.0119 (Windows)
Create Date                     : 2014:10:30 18:52:28+08:00
Page Count                      : 6

EXIF Metadata provided by EXIF.tools