ARRIS SD230 SD230 WLAN Access Modem User Manual Manual

Arris International, Inc. SD230 WLAN Access Modem Manual

Manual

Series 6000 SD230 Access Appliance User’s Guide Preliminary September 2003 601004-00X
Warning: This product may not be exported outside the United States and Canada without authorization from the U.S. Department of Commerce, Bureau of Export Administration. Any export or re-export by the purchaser, directly or indirectly, in contravention of U.S. Export Administration Regulation is prohibited. This document may not be reproduced, in whole or part, without the written permission of coaXmedia, Inc. The contents of this document are subject to change without notice. coaXmedia, Inc. assumes no liability for damages resulting from the use of this product or for the information contained in this manual. coaXmedia and the coaXmedia logo are trademarks of coaXmedia, Inc. All trademarked products mentioned in this document are trademarks of their respective companies. © Copyright 2001 coaXmedia, Inc. All rights reserved. Printed in U.S.A.
Limited Warranty coaXmedia guarantees that every SD-Series Access Appliance will be free from physical defects in material and workmanship under normal use for one (1) year from the date of purchase. If the product is determined to be defective during the warranty period, please call coaXmedia’s or your equipment provider’s Customer Support to obtain a Returned Material Authorization (RMA) number. The RMA number should be clearly marked on the outside of the package, when it is shipped. If returned product is determined to be functioning properly, a nominal processing fee may be charged to cover shipping and handling. This product contains no end-user serviceable parts; authorized technicians should perform all service. IN NO EVENT WILL COAXMEDIA BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, SPECIAL OR EXEMPLARY DAMAGES ARISING OUT OF THE USE, INABILITY TO USE, OR PERFORMANCE OF THE COAXMEDIA PRODUCT (S), ITS ACCOMPANYING SOFTWARE, OR DOCUMENTATION, INCLUDING WITHOUT LIMITATION DAMAGES FOR LOSS OF BUSINESS PROFITS OR BUSINESS INTERRUPTION, BASED UPON PRINCIPLES OF CONTRACT, WARRANTY, NEGLIGENCE, STRICT LIABILITY OR OTHER TORT, BREACH OF ANY STATUTORY DUTY, PRINCIPLES OF INDEMNITY OR CONTRIBUTION, EVEN IF COAXMEDIA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Furthermore, coaXmedia makes no warranty or representation (expressed, implied, or statutory) with respect to its products, accompanying software, or documentation, or to their use, as well as disclaims against their quality, performance, merchantability, or fitness for any particular purpose. Therein, coaXmedia does not warranty that the products will be error free or will operate without interruption. coaXmedia reserves the right to revise or update its products, software, or documentation without obligation to notify any individual or entity.
FCC Compliance The coaXmedia access appliance has been tested and found to comply with the limits for a Class B personal computer and peripherals, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this unit does cause harmful interference to radio or television reception, which can be determined by turning the unit off and on, the user is encouraged to try to correct the interference by one of more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and the receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected • Consult the dealer or experienced radio/TV technician for help. Warning: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user's authorization to operate this equipment. This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The radiated output power of this device is below the FCC radio frequency exposure limits. However, this device should still be installed and used in such a manner that the potential for human contact during normal operation is minimized. In order to comply with RF exposure limits, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
coaXmedia Series 6000 Table of Contents i Table of Contents Table of Contents........................................................................... i Contact Information..................................................................... 1 1 Important Rules for Safe Operation...................................... 2 1.1 Service................................................................................3 2 Introduction ........................................................................... 4 2.1 Features..............................................................................4 2.2 What You Have....................................................................5 2.3 What You Need....................................................................5 2.3.1 Building Requirements....................................................5 2.3.2 Personal Computer Requirements....................................5 Using this Guide.............................................................................6 3 About the Access Appliance................................................... 7 3.1 Front Panel..........................................................................7 3.2 Rear Panel...........................................................................8 4 Installing the Access Appliance............................................. 9 4.1 Overview.............................................................................9 4.1.1 Before Installing ............................................................9 4.1.2 Building Requirements....................................................9 4.1.3 PC Requirements ...........................................................9 4.1.4 Review the Safety Recommendations...............................9 4.1.5 Gather Tools..................................................................9 4.1.6 Select Location..............................................................9 4.2 Connecting the Access Appliance .........................................10 4.3 Step by Step......................................................................11 5 Configuring Your PC............................................................. 13 5.1 How to Configure your PC for DHCP.....................................13 6 Using your Access Appliance ............................................... 14 6.1 Using the Connection..........................................................14 6.2 Disconnecting ....................................................................14 7 Troubleshooting Connection Problems ............................... 15 8 Specifications ....................................................................... 16 9 Optional Equipment and Replacement Parts ......................17 10 SD230 Wireless Access Point Administrator Setup.………..18
coaXmedia Series 6000 SD230 Access Appliance User’s Guide 1 Contact Information If after reading through the provided documentation you still have questions regarding your Access Appliance, use these contact points to request the information you need: Support Phone: 877-885-COAX / 877-885-2629 (toll free) Fax: 678-990-5457 E-mail: support@coaXmedia.com Sales Phone: 678-990-5450 Fax: 678-990-5457 E-mail: sales@coaXmedia.com The coaXmedia Web Page http://www.coaXmedia.com See your Service Contract/Agreement for the appropriate customer service or technical support phone numbers.
SD230 Access Appliance 2 SD230 Access Appliance User’s Guide 1 Important Rules for Safe Operation The Access Appliance has been engineered with both performance and safety in mind. However, safety is also your responsibility. Read and observe all these recommended safety precautions. Check power sources. Plug this device only into the recommended power source indicated on the product’s marking label. If you are not sure what type of power source is provided at your location, consult your local power company or other certified expert. Always use the provided power adapter. Always use the power adapter provided with the product. And do not use any substitutes. If the provided adapter becomes damaged or misplaced, see page 17. Be careful of overloading. Do not overload wall outlets or extension cords, as this can result in the risk of fire or electric shock. Don’t use any frayed power cords. Don’t stretch cords to reach the appliance or other devices: tension at the connectors is a fire hazard. Avoid damaging power cords. Arrange power supply cords so that they are out of the way. Route them through areas where it is unlikely they will be walked on or objects rolled over them. Avoid placing the product near any heat source. Never place this product near any heat source. This includes any kitchen appliances (ovens, toasters, etc.), heating vents, or any other heat source. This is a fire hazard. Do not use the product near water. Never use this product anywhere near a water source or in a damp area. Don’t use it near bathroom or kitchen water sources such as sinks or washing appliances. Don’t use it near pools. Don’t use it in a damp area such as a basement. Avoid stacking. Avoid stacking this item on top of or under other devices that can generate or radiate heat. Such stacking can concentrate heat sources in a small area and creates a fire hazard. Use caution when moving the product. Use caution whenever moving the Access Appliance. If dropped, resulting damage could render the appliance inoperable or a fire hazard. Ground the cable system. Be sure the outside cable system is grounded to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984 (section 54 of the Canadian Electrical Code, Part 1) provides information with respect to proper grounding of the cable system. Always refer to local building codes to ensure compliance with all applicable grounding requirements. Do not connect or disconnect the RF coax cable to or from your access appliance while it is plugged into the power source. Unplug the power adaptor before cleaning. Do not use liquid cleaner or any aerosol cleaner. Use only a damp cloth for cleaning. Protect from lightning. For added protection for this product during a lightning storm, unplug the all devices from the coaxial cable and power sources when they are not in use, especially for any extended time. Wait at least 10 seconds after disconnecting the power adaptor before re-connecting it.
coaXmedia Series 6000 SD230 Access Appliance User’s Guide 3 1.1 Service Do not remove covers from or attempt to service the product yourself. Opening or removing covers may expose you to dangerous voltage or other hazards and void the product warranty. Refer servicing of this product to qualified service personnel under the conditions listed here: • When the power supply or cord is damaged. • If liquid has been spilled onto or objects have fallen onto the product. • If the product has been exposed to rain or water. • If the product does not operate normally by following the operating instructions. • If the product had been dropped or its enclosure has been damaged. • When the product exhibits a distinct change in performance, such as the inability to perform basic functions, indicating a need for service.
SD230 Access Appliance 4 SD230 Access Appliance User’s Guide 2 Introduction CoaXmedia welcomes you to the world of Broadband. Through the use of our SD230 WAP (Wireless Access Point) Access Appliance and your wireless PC, you can take advantage of the many Internet services available today, and will be ready with high-speed connectivity that is required for the services of tomorrow. The SD230 Access Appliance was designed with the general computer user in mind, to insure fast, easy installation and operation. CoaXmedia has alleviated the typical concerns of installing new computer equipment, making this product’s setup easier than that of a VCR. And once it’s set up, using the product is as simple as double-clicking an icon. 2.1 Features • Provides access to Broadband services • Easy to install and use • Doesn’t require opening the PC or changing existing network settings • Unique geometric design with clearly marked status indicators • Multiple units can operate in a single building or within a single dwelling • Operates over existing cable TV or CATV wiring without interfering with reception or other services in any way • Utilizes patented transmission techniques specifically designed to overcome topology issues commonly found in the on-premises cable distributions networks of Multi-Dwelling Units (MDUs)
coaXmedia Series 6000 SD230 Access Appliance User’s Guide 5 2.2 What You Have Check the SD230 Access Appliance package. In addition to this User’s Guide (CD), the package should contain: • 1 Access Appliance • 1 External 2dBi Antenna • 2 coaxial cables • 1 Diplex-Filter or splitter (depending on SD model) • 1 power adapter with attached power cord If you are missing an item, please contact your service provider. 2.3 What You Need In addition the Access Appliance package, you will need the following: • 1 Personal Computer - see requirements below • 1 7/16” or adjustable wrench (optional) — may be needed to loosen and tighten cable connections. • 1 CATV wall outlet 2.3.1 Building Requirements This unit will only operate in buildings utilizing coaXmedia Internet Access Solutions. 2.3.2 Personal Computer Requirements The Personal Computer (PC) must meet the following: • Have an 802.11b wireless client device installed. • Microsoft Internet Explorer 4.0 or later, or Netscape Navigator 4.0 or later
SD230 Access Appliance 6 SD230 Access Appliance User’s Guide Using this Guide This User’s Guide has been provided to assist you in the installation and operation of your Access Appliance. Throughout this guide, special icons have been used to highlight specific points. Although many of these highlights are simply informative in nature, several denote points of user safety and should be read thoroughly and understood. The icons used in this manual are defined below: Important Notes or Required Reading Note Warnings and Safety Information Stop, review before proceeding
coaXmedia Series 6000 SD230 Access Appliance User’s Guide 7 3 About the Access Appliance 3.1 Front Panel The LED indicators on the front of the Access Appliance indicate its current operation status. These five indicators are described below. There are 3 red LEDs on the WAP that can be seen through the front panel above and behind the 5 front panel LEDs. From left to right these are Link, Activity, and WAP Power. Under normal operation all LEDs are lit. The Activity LED will flicker during Transmit or Receive activity. LED Description Operation P Power On when power is being provided by the power adapter S Sync Off when the Access Appliance is not receiving a service signal from the central access equipment Blinks when the Access Appliance has not been activated by the central access equipment On steadily when the Access Appliance has been activated by the central access equipment (making Internet connection possible) T Transmit Data On when data is ready to be transmitted. (May blink fast when sending streams of data.) R Receive Data On when the Access Appliance is waiting for the PC to read data. (May blink fast when receiving streams of data.) D Diagnostics/Disable On when maintenance or diagnostics is being performed by the central access equipment, or when the Access Appliance is disabled – preventing access to the Internet May blink randomly if a fault is detected by the Access Appliance
SD230 Access Appliance 8 SD230 Access Appliance User’s Guide 3.2 Rear Panel The ports at the back of the Access Appliance connect the appliance to your computer, power, and to coax network. When making these connections, the TV/VCR and computer should be unplugged from the power source as a precaution. Port Description Usage RF Coax Connector Used for connecting the Appliance to the coax network via the coaxial cable. The other end of this cable connects to the diplex-filter connector labeled X. (The diplex-filter is in turn connected by cable to the existing TV coax cable.) PWR Power Used to provide power to the unit. One end of the power cord should be attached to the Access Appliance and the transformer end plugged into a wall power outlet. Antenna RSMA Connector Used to connect the external antenna to the Access Appliance.
coaXmedia Series 6000 SD230 Access Appliance User’s Guide 9 4 Installing the Access Appliance These sections provide step-by-step instructions on installing you Access Appliance. 4.1 Overview The SD230 Access Appliance is easy to install taking an average of 15 minutes to setup. However, before getting started, it is important for you to read the following information. 4.1.1 Before Installing The WAP should be setup with the administrator specified settings before the unit is connected to the coax feed (Section 10). 4.1.2 Building Requirements This unit will only operate in buildings utilizing coaXmedia Internet Access Solutions. 4.1.3 PC Requirements The SD230 Access Appliance requires the use of an 802.11b client Wireless Network Interface Card installed in your PC; if you PC does not have this Network Interface Card, one must be installed before you can use the Access Appliance. Many computer retail stores and service centers can perform this task, if you require assistance. 4.1.4 Review the Safety Recommendations It is important to review the Safety Recommendations to insure the proper installation and operation of your Access Appliance. See the Safety Recommendations Section of this User’s Guide. 4.1.5 Gather Tools Although most installations do not require any special tools, it may be necessary to use a 7/16” wrench or pliers to loosen an existing coax cable connection on a TV or CATV wall outlet. It is also desirable to lightly tighten all coax cable connections associated with installing the Access Appliance to insure solid, reliable connections; this can be done with a wrench, with pliers or by hand. Select Location The first aspect of installing your new Appliance will be selecting a CATV outlet that is located near your computer. When making your selection, consider where you use your PC/laptop and the distance between that location and the CATV outlet. Although coaxial cables are provided with your Appliance, they may not be long enough for your installation; if this is the case, longer cables can be obtained at a local store (RG-6 or RG-59 with F-type connectors).
SD230 Access Appliance 10 SD230 Access Appliance User’s Guide 4.2 Connecting the Access Appliance This illustration diagrams the series of steps involved in connecting the parts together. Many parts have labeled connectors; those labels are in bold type. Two pieces of cable come packaged with the appliance; they are referred to as the “provided” cables. ! Unplug the TV (VCR) cable from the room’s cable outlet # $ % Connect to theAccess Applianceusing an 802.11bWireless ClientNetwork InterfaceCard installed inthe client PC.&Plug the transformer cord into the Access Appliance ‘s PWR connector With all other connections secure, plug the transformer into the wall power outlet ' (Plug it into the diplex-filter’s TV connector Use the 8 ft coaxial cable(provided) to connect from thediplex-filter’s X connector tothe Access Appliance’s RF portUse the 2 ft. coaxial cable (provided) to connect from the diplex-filter’s IN connector to the wall outlet Note: To ensure proper operation and UL compliance of product in the USA, only use Fairway model WN10A-050 power supply
coaXmedia Series 6000 SD230 Access Appliance User’s Guide 11 Turn off power to the computer and TV (or VCR) before connecting up the cables as a precaution. It is recommended to disconnect them from the wall power outlets. 4.3 Step by Step 1 Disconnect the TV from the CATV Outlet Locate the cable connecting your TV (or VCR) to the wall cable TV/CATV outlet. Unscrew the end from the wall connector. Leave the other end connected to the TV/VCR. If you aren’t using a TV in the room, just skip this step. 2 Connect the TV to the Diplex-Filter Connect the end of the coaxial cable that was unscrewed from the TV/CATV outlet to TV port of the included diplex-filter. If a TV or other device is not being used, leave the TV port unconnected. Do not substitute a generic cable splitter for the provided diplex-filter; although doing so will not damage the TV or Access Appliance, the diplex-filter improves the Appliance’s operational reliability If you are not connecting to a TV in the room, you should use the provided diplex-filter, leaving the TV connector unconnected. If you use one or more cable splitters in the room, you may continue to use them; however, you should install the diplex-filter so that it is the first device connected to the TV/CATV outlet. 3 Connect the Diplex-Filter to the CATV Outlet a) Locate the shortest coaxial cable included with the Access Appliance and connect one end to the IN port of the diplex-filter. b) Connect the loose end of that coaxial cable to the CATV wall Outlet. 4 Connect the Access Appliance to the Diplexer a) Locate the remaining coaxial cable included with the Access Appliance and connect one end to the X port of the diplex-filter. b) Connect the loose end of that coaxial cable to the RF port of the Access Appliance. Make sure are all connections are secure; if necessary, use a wrench or pliers to lightly tighten the connections. 5 Connect the Power Adapter to the Appliance Locate the included power adapter and connect the appropriate end to the PWR port on the Access Appliance. 6 Apply Power to the Access Appliance Before plugging the adapter into the power outlet, consult these important notes:
SD230 Access Appliance 12 SD230 Access Appliance User’s Guide Please check the voltage requirements printed on the power adapter before plugging it into an AC power outlet. If the power adapter’s input voltage specification does not match what is being provided at your AC outlet, contact your service provider or coaXmedia for a replacement. Power can now be applied to the Appliance by plugging the power adapter into a unused AC power outlet (on a wall, power strip, surge protector, or UPS). The P indicator on the Appliance front panel should light up when power is applied. (See also a description of the front panel lights on page 15.) Now that the Access Appliance setup has been completed, you can set up your computer to use the connection.
coaXmedia Series 6000 SD230 Access Appliance User’s Guide 13 5 Configuring Your PC Now that all the necessary hardware connections have been made, your computer’s network configuration may need to be adjusted. Often when using the Ethernet connection, Internet Service Providers require your Ethernet card to be configured to obtain an IP address automatically (DHCP). Instructions for making the necessary adjustment can be found below, however your Internet service provider may supply you with additional instructions that should take precedence. Please refer to these instructions if supplied. 5.1 How to Configure your PC for DHCP The following DHCP configuration procedure applies to the following Operating Systems: Windows 98 Windows 2000 Windows Me Windows XP For Windows 98: 1. Click on Start, Settings, then Control Panel. 2. Double-click on the Network icon. 3. Double-click on TCPIP. Select the IP Address tab. *See note below. 4. At the IP Address tab, place a check in the Obtain an IP Address automatically circle. 5. Click OK, then on OK once more. If the computer prompts you to reboot, please do so now. For Windows 2000 and Windows ME: 1. Click on Start, Settings, then Control Panel. 2. Double-click on the Network and Dial-Up Connections icon. 3. Right-click on the Local Area Connection icon and select Properties. 4. Double-click on Internet Protocol (TCP/IP). *See note below. 5. At the General tab, place a check in the Obtain an IP Address automatically circle. 6. Place a check in the Obtain DNS server address automatically circle. 7. Click Apply, and then click OK. If the computer prompts you to reboot, please do so now. For Windows XP:
SD230 Access Appliance 14 SD230 Access Appliance User’s Guide 1. For Windows XP, click on Start, Settings, then Control Panel. 2. Click on Network and Internet Connections then click on Network Connection. 3. Right-click on the Local Area Connection icon and select Properties. 4. Double-click on Internet Protocol (TCP/IP). *See note below. 5. At the General tab, place a check in the Obtain an IP Address automatically circle. 6. Place a check in the Obtain DNS server address automatically circle. 7. Click Apply, and then click OK. If the computer prompts you to reboot, please do so now. Note: If information is already entered in these fields, be sure to write down all this information before making any changes. You will need to reenter this after you’re done using the coaXmedia SD200. Under Windows 2000, you must be logged in using an account with administrators’ rights in order to make the necessary changes. For Unlisted Operating Systems: If you are using a PC with an Apple, Linux or any other operating systems not mentioned previously, please refer to your operating system’s documentation for instructions on how to enable DHCP client operation. 6 Using your Access Appliance 6.1 Using the Connection Your Access Appliance provides you with an “Always-On” connection to the Internet so simply start up your e-mail client, Web browser, newsgroup reader, or other Internet applications and use them as usual. Note: If you are concerned that someone may attempt to access your computer via the Internet, you can use any number of firewall or Internet security software tools to prevent remote access. Another solution is to disconnect the computer cable or disconnect power from your Access Appliance. 6.2 Disconnecting If you have any security concerns about leaving your PC connected while it is not in use, simply close the wireless connection between the PC and WAP.
coaXmedia Series 6000 SD230 Access Appliance User’s Guide 15 7 Troubleshooting Connection Problems The P (Power) and S (Sync) LEDs should be ON; and you should see the T (Transmit) and R (Receive) LEDs flash when you attempt to browse the Internet. All three (unlabled) LEDs should be illuminated on the access point card. If the S or D LED is blinking or no LEDs are on, check all the hardware connections and cables (refer to Connecting to the Access Appliance). If this problem persists, contact your service provider for assistance. (See also page 7 for a description of the Front Panel status LEDs.)
SD230 Access Appliance 16 SD230 Access Appliance User’s Guide 8 Specifications Client Interface Wireless transfer speed Up to 11Mb/s (up to 22Mb/s with compatible client card) Indicators Front panel LEDs Connectivity Wireless 802.11b Electrical Specifications AC Adaptor Option 1 Inputs: 100-240VAC 50/60 Hz Output: 5VDC, 2A Environmental Specifications Operating temperature 0° to +40° C Storage temperature -40° to +75° C Humidity 10% to 90% non-condensing Physical Specifications Dimensions 7.125”wide, 7.875” deep, 1.875” height Agency and Regulatory Compliance Certifications FCC UL / ULc
coaXmedia Series 6000 SD230 Access Appliance User’s Guide 17 9 Optional Equipment and Replacement Parts Many optional and replacement parts are available for the SD230 access appliance. If you need to replace or add a part, consult the service provider from whom you obtained this product. These appliance options and replacements are available. Specify the part number(s) as well as description(s) of any part when ordering to ensure correct identification of the item. Sales Part # Description MK200-001 SD200 Wall Security Bracket Kit UD230-001 SD230 Access Appliance User’s Guide
SD230 Access Appliance 18 SD230 Access Appliance User’s Guide 10 SD230 Wireless Access Point Administrator Setup The default settings for the coaXmedia SD230 Wireless Access Point (WAP) are pre-set from the factory. These settings are slightly different from the default settings of the stand-alone WAP and will be outlined here. It must be noted that if for some reason the reset button on the WAP* (or through the browser utility) is activated, the settings will have to be re-defined. The changes are as follows: DHCP Server under the IP Setting tab on the WAP is selected to Off and the Diversity Antenna option is selected under the Advanced Setting tab under Antenna Selection. The default LAN IP of the access point is 192.168.1.1. To set up the SD230 Access Point for configuration changes, connect the unit to the 5V supply only, leaving the RF cable feed disconnected. Using a desktop or laptop computer with a wireless client card, configure the TCP/IP settings to use the following IP: 192.168.1.5 and subnet mask: 255.255.255.0. Select ok and ok to enable the new settings. You can use the command prompt under the accessories tab in the programs menu on Windows based machines and type in the command ipconfig then enter to verify the settings. Open a web browser and type http://192.168.1.1 in the address field then enter. The Enter Network Password window should come up (figure 1). Type admin in the User Name field and type admin in the Password field followed by the enter key. The Access Point Status screen will come up and display the menu bar along with access point status information (figure 2). Figure 1 Figure 2 *note: The SD230 reset button is internal to the unit and requires separation of the housing to access.
coaXmedia Series 6000 SD230 Access Appliance User’s Guide 19 Select the Basic Setting tab (figure 3). This is where you can assign the access point a unique name, SSID (Service Set Identifier) identifier label, channel, and WEP (Wired Equivalency Privacy) encryption. We are currently defining the WAP’s AP Name and SSID as coaXmediaWAP. The access point factory defaults are TEW310APB for the AP Name and default for the SSID field. The default Channel is 1. Channel 1 through 13 can be selected on the WAP and is dependant upon which channel is subjected to the least interference from other devices operating in the 2.4GHz range (portable phones, adjacent access points, etc.). The default for WEP Key encryption is disable. Encryption Mode default is HEX but can be selected for ASCII. If WEP Key encryption is enabled, 64-bit encryption requires 10 HEX values (or 5 ASCII characters), 128-bit encryption requires 26 HEX values (or 10 ASCII characters), and 256-bit encryption requires 58 HEX values (or 29 ASCII characters). Hex values are the numbers 0 through 9 and the letters A through F, ASCII charters are any of the alphanumeric keys on the keyboard. There are 4 encryption keys that can be set, they must all be the same type (ie 124bit and ASCII or 64bit and HEX). If key 1 is set for the default key, then key 1 on the client computer must match these settings. Please make a note of the SSID identifier and encryption WEP Key(s), Mode, and values for future reference. (Note: Confirm that the wireless card on the client computer being used to set up the WAP is compatible with the encryption modes selected on the WAP as it will be necessary to apply the matching WEP encryption settings to the client computer to continue setup of the access point.) Select the Apply key for the changes to take effect. The access point will re-start. Make the appropriate changes to the client computer WEP values to proceed with the WAP setup. Figure 3
SD230 Access Appliance 20 SD230 Access Appliance User’s Guide Select the IP Setting tab (figure 4). This is where you can change the Fixed IP, Subnet Mask, and Gateway address if so desired. Please add this information to the encryption data taken earlier if it is changed. Currently it is advised to set the Fixed IP to 1 less than the coaXmedia Gateway and decrement the gateways DHCP upper address pool by 1. If multiple WAPs are to be installed, decrement the fixed IPs and adjust the DHCP upper address pool as deemed appropriate. On the WAP, insert the coaXmedia gateways subnet mask and rfLAN IP in the Subnet Mask and Gateway fields. Doing this will allow future control of the WAP through the computer running the coZmo network control application. DO NOT select Obtain IP Automatically. Select DHCP Server Off if it is not already selected. Select the Apply key for the changes to take effect. The access point will re-start. (Note: If the fixed IP is changed and you want to continue with the WAP setup, you must reconfigure the IP of the client computer to one that is within the same IP group that was assigned to the WAP.) Figure 4
coaXmedia Series 6000 SD230 Access Appliance User’s Guide 21 Select the Advanced Setting tab (figure 5). This is where the access point operation mode is defined. The default AP Mode is AP and is where the access point will normally be set (in some instances it may be desired to run the access point in bridge mode). This is also where the antenna selection is made. The default value for Antenna Selection is Left Antenna, which is the externally mounted antenna on the SD200 WAP. It is desired to have Diversity Antenna selected for the best performance. Select the Apply key for the changes to take effect. The access point will re-start. Figure 5
SD230 Access Appliance 22 SD230 Access Appliance User’s Guide The Security tab brings up the screen that allows the access point Administrator id and AP Password to be changed (figure 6). The default values for the Administrator ID and AP Password are admin and admin. Please note the new ID and password if they are changed. The MAC Filter section is disabled by default but can be enabled to allow or deny PCs with a particular MAC ID as specified in the list. Figure 6
coaXmedia Series 6000 SD230 Access Appliance User’s Guide 23 The Tools menu (figure 7) allows the user to save the current setup of the access point as a .bin file on the local administrator client pc. This is useful for restoring the device back to its user-defined values if for some reason the access point has been reset to the factory default or any other non-desirable values. To back up the settings select the Backup tab. The file will be saved as config.bin by default in the directory you choose to save it in. The file can be renamed if multiple configurations are to be saved. To restore the settings select the Browse… tab then browse to the .bin configuration file you wish to restore. Select the Restore tab to load the file settings. The Restore to default settings tab will restore the access point back to its original default settings (not the coaXmedia default settings). Using this tab is not recommended unless it is absolutely necessary. It will probably not be accessible when it is absolutely necessary and the unit may have to be disassembled to access the hard reset button on the access point. If this does become necessary, apply power to the access point then depress the reset button for approximately 10 seconds. Access the access point as originally described then restore the saved configuration settings or reconfigure manually. Table 1 shows a list of the access point default settings as well as the coaXmedia-loaded settings. Firmware Upgrade is used to upgrade the firmware of the access point if one is made available. An upgrade procedure is similar to the restore settings procedure outlined above. Figure 7 When the access point setup is complete, remember to reset the client computer to obtain an IP address and a DNS server automatically. Connect the RF cable to the SD230WAP.
SD230 Access Appliance 24 SD230 Access Appliance User’s Guide TABLE 1 Access Point Default Settings Access Point Default Settings coaXmedia Loaded Settings Basic Setting AP Name TEW310APB (or APmacidx) coaXmediaWAP SSID default (or APmacidx) coaXmediaWAP Channel 1 (or 6) 1 WEP Key Disable Disable Mode HEX HEX IP Setting LAN IP Fixed IP Fixed IP IP 192.168.1.1 192.168.1.1 Subnet Mask 255.255.255.0 255.255.255.0 Gateway 0.0.0.0 0.0.0.0 DHCP Server On Off IP Range From 192.168.1.2 N/A To 192.168.1.100 N/A DNS Server 0.0.0.0 N/A Advanced Setting AP Mode AP AP Beacon Int. 100 100 RTS Thres. 2432 2432 Frag.Thres. 2346 2346 DTIM Intv. 3 3 Auth. Type Both Both Preamble Long Preamble Long Preamble Basic Rate 1-2(Mbps) 1-2(Mbps) Supp. Rate 1-2-5.11-22(Mbps) 1-2-5.11-22(Mbps) Ant. Sel. Left Antenna Diversity Antenna Password Admin. ID admin admin AP Password admin admin MAC Filter Disabled Disabled

Navigation menu