Atoms Labs AWS33R 7 inch LCD Monitor for HD System User Manual JSW QSG HDNVR 7R V1 2

Download:
Mirror Download [FCC.gov]
Document ID	3464134
Application ID	AY6YiPsm4I1aDpH72I7WFA==
Document Description	Users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	155.73kB (1946604 bits)
Date Submitted	2017-07-13 00:00:00
Date Available	2017-07-13 00:00:00
Creation Date	2016-12-13 10:12:26
Producing Software	Adobe PDF library 10.01
Document Lastmod	2016-12-13 10:12:26
Document Title	JSW_QSG_HDNVR-7R_V1.2
Document Creator	Adobe Illustrator CS6 (Windows)

QUICK START GUIDE
KIT CONTENT
*Digital Wireless Outdoor
IR Camera
7’ LCD Monitor for HD System
AWS33R
*Quantity varied subject to configuration
Digital Wireless Receiver
Console
*Camera / Receiver Antenna
*Camera Stand
x1
Screw Pack (For Camera )
Camera / Receiver Adaptor
INSTALLING YOUR DEVICES
A. Setting up your monitor
1. Insert the memory card and/or connect HDD device to USB port.
2. Twist on the antenna to the LEFT side of the console.
3. Connect the Ethernet cable from the BACK of the console to your router.
4. Connect the 12V power adaptor and power on the system.
5. Twist on the stand to the back of the console.
Note: Keep distance between device minimum 1 meter.
1 M+
Ethernet Cable
Camera power
adapter-5V/1.5A
HDNVR power
adapter-12V/2A
x1
x1
Monitor
PRODUCT OVERVIEW
Power Botton
1 M+
1 M+
Antenna
1 M+
Router
Reset Botton
B. Installing your camera
1. Secure the camera stand to a stable surface, celling or wall mount using three pcs screws.
2. Loosen the thumb screw of the camera stand and secure the camera body to the bracket.
3. Screw the antenna into rear of the camera.
4. Connect the supplied power adaptor to the camera and the power source. The RED LED
will light up which indicate the camera is ready for setup.
Memory Card Slot
Power Jack
Note: Before using the memory card/ HDD
for recording video, you MUST format the
memory card/ HDD on the console.
1 M+
USB Port
Router
Connect system directly after the router. Do not
connect system to router through a hub or switcher.
Enable DHCP and UPnP on your router. TCP port
#6000 and #80 should be opened.
Internet
(1)
(2)
(3)
Mobile Device
Thumb Screw
SYSTEM OPERATION
Live View with Quad Display
Main Menu
1. Tap
2. Tap
to extend quick select menu.
to enter main menu.
Tap one channel
Live-view full screen
Tap again to return
Tap one channel
Show it at left side
Live-view full screen
1.Camera Setup: Pair camera, and video quality.
2.Recorder Setup: Setup recording settings such as
date, recorder type, and motion area.
3.Event list: Event video playback.
Tap again to return
4.System Setup: Setup system time, powersaving
mode, and restore default system settings.
5.Storage Setup: Management storage.
Main Menu
Camera Setup
Live View with Dynamic Display
Pair the camera to HDNVR
If you have additional cameras disconnected with HDNVR , follow steps below to pair:
1. Tap the camera setup icon to access the camera pairing screen.
2. Select the Camera channel (Camera 1/2/3/4).
3. Tap the "Camera Pairing" icon.
4. Within 35 seconds, press and hold the pairing button on the back of the camera for
5 seconds. The Green Link LED will light up which indicate the camera is paired successfully.
Quick Select Menu
Tap to turn on /off the camera
Turn CH2 off
Turn CH2/CH3 off
SETUP THE HDNVR
Display/Undisplay Menu
Single Channel Record/
Stop Single Channel Record
Enter Main Menu
All Channel Record/Stop
All Channel Record
QUAD Display Select
Volume Control
Mute/Vol1
Smart-QUAD Display Select
Vol2/Vol3
Tap one quadrant to choose the current channel, and a red check
HDNVR will display audio from the current selected channel.
will display.
1. Connect the device to your router, and make sure DHCP and UPnP service are enabled on
your router setting.
2. Power up and turn on HDNVR.
In the Live View mode, wait until
logo turns
or
This means system is now ready for internet connection. The process takes around 30 seconds.
3. Download the "WDVR Cam" app and run the app on a phone or tablet.
Andrio
For iOS
For Android
4. Add New Device
Andriod: Tap the "NEW" icon to add new device.
iOS: Tap the "+" icno to add new device.
5. Tap the “scan QR code” located on the rear of the device. Also you can enter the ID manually.
For iOS
1. Tap the ”+” icon to enter device list
2. Tap [Edit] button
3. Change default password
Note:
If you have not installed the app to scan the QR code, we suggest to download and install the
app “Barcode Scanner ” .
6. Enter the default password "123456". Give your remote access a name and tap "save"
to exit.
7. Change the default password:
For privacy matter, follow the steps below to change the security code on both device
and app.
a. Device: 1. In the main menu section, tap storage setup
2. Tap network setting
3. Click DHCP then changes the password
4. Tap “OK” once you’re finished password modification
3-1
Main Menu
Camera Setup
8. Tap the device from the list, then tap "play" to connect. It will take a few seconds to
access the remote video, depending on the network environment.
Note:
HDNVR allows max 3 remote viewers to access the system at a time. The 4th connection will be rejected.
When a local user is operating setup menu. The remote user will be temporarily rejected to access
HDNVR until the local user leaves the setup menu.
HDNVR requires 1.5Mbps connection bandwidth per connection to receive best viewing quality/
streaming. It is suggested to set camera resolution and quality to "Low" in order to receive
streaming remote view if the bandwidth is below 1.5Mbps.
APP INTRODUCTION
Andriod
iOS
Device List
Live View
b. WDVR CAM APP
For Andriod
1. Go to the device list
2. Press and hold the device name, the menu will appear on the panel. Then tap “modify”.
3. Tap “update” once you’re finished password modification
Add
new device
Add new device
/Device List
xxxxxxxx
xxxxxxxxxxxxxxx
Remote Setting
Push Notification
* Tap
to connect HDNVR,
then tap the “more” icon
that setting menu will show up.
Connect/
Disconnect Device
Record ON/OFF
Playback
Snapshot
For Andriod
Push Notification
1. Tap push notification setting
2. Setup interval time of the push
a. Enable/disable the push notification:
For Andriod
For iOS
1. Go to more section to tap Push Notification.
2. Click/unclick to enable/disable the push notification.
3. Enter user name.
4. Tap ”OK” when you done.
1. Tap push setting
2. Setup interval time of the push
c. Time period:
This function allows you to setup "Do Not Disturb" time. You can setup when Push is to start
and end. Only during the time, you will receive the push.
d. List:
From list section, you can see which smart devices currently receive push from the system.
WDVR app allows max 8 devices to receive the push. You may remove all devices from the
push list by resetting the language.
FACTORY DEFAULT SETTING
1. Go to the system setting.
2. Reset the language.
3. The system will restore to factory default.
For iOS
1. Tap
icon.
2. Enable/disable the push notification.
3. Enter user name.
4. Tap ”Save” when you done.
Note:
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
b. interval
Go to the push notification setting to setup interval time of the push. There are four options
you can select how long you’ll receive the push.
Note:
Please change default security code and apply push service from smart devices after you reset the
language and system parameter to default.
Your smart phone will receive the push immediately after first triggered. After that the camera will
send the push according to interval time you setup. This function allows you to receive less push of one
serial event happened continuously in time.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation
Products with CE Marking comply with EMC Directive
(2014/30/EU); Low Voltage Directive (2014/35/EU); RED
(2014/53/EU); ROHS Directive (2011/65/EU) issued by the
Commission of the European Community. Compliance
with these directives implies conformity to the following
European Norms:
EMC: EN 301 489
LVD: EN 60950
Radio: EN 300 328
If the camera system no longer functions or can no longer be repaired, it must be disposed of according to the valid statutory regulations.
Disposal of spent batteries/accumulators:
You are required by law (Battery Ordinance) to return all spent batteries and accumulators. Disposing of spent batteries/accumulators with
common household waste is prohibited! Batteries/accumulators that contain hazardous substances are marked with the symbols on the
side. These symbols indicate that it is prohibited to dispose of these batteries/accumulators in the household waste. The abbreviations for the
respective heavy metals are: Cd=cadmium, Hg=mercury, Pb=lead. You can return spent batteries and accumulators that can no longer be
charged to the designated collection points in your community, outlets or wherever batteries or accumulators are sold. Following these
instructions will allow you to fulfill the legal requirements and contribute to the protection of our environment!

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Format                          : application/pdf
Title                           : JSW_QSG_HDNVR-7R_V1.2
Metadata Date                   : 2016:12:13 10:12:26+08:00
Modify Date                     : 2016:12:13 10:12:26+08:00
Create Date                     : 2016:12:13 10:12:26+08:00
Creator Tool                    : Adobe Illustrator CS6 (Windows)
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 4453 bytes, use -b option to extract)
Instance ID                     : uuid:5094a5ea-0ee7-4011-880c-a77f36427709
Document ID                     : xmp.did:07B02E93D9C0E611A68AB8DD4A64BC69
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:0b575b89-0b17-41ea-9f02-9ad057189fe4
Derived From Document ID        : xmp.did:B8DB1BF939B8E611AECBD4FB2E307527
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:939D644CEC45E311BF40FCCBC46B3F76, xmp.iid:07B02E93D9C0E611A68AB8DD4A64BC69
History When                    : 2013:11:05 16:19:57+08:00, 2016:12:13 10:12:19+08:00
History Software Agent          : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows)
History Changed                 : /, /
Manifest Link Form              : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference
Manifest Reference File Path    : D:\Product_QSG_OM\HDNVR-7R\Snapshot\Andriod\Screenshot_2016-10-28-10-05-33.jpg, D:\Product_QSG_OM\HDNVR-7R\Snapshot\ios\4.png, D:\Product_QSG_OM\HDNVR-7R\Snapshot\Screenshot_2016-10-28-13-23-17.jpg, D:\Product_QSG_OM\HDNVR-7R\Snapshot\Screenshot_2016-10-28-10-04-45.jpg, D:\Product_QSG_OM\HDNVR-7R\Snapshot\Andriod\Screenshot_2016-10-28-10-05-33.jpg, D:\Product_QSG_OM\HDNVR-7R\Snapshot\ios\3.png, D:\Product_QSG_OM\HDNVR-7R\Snapshot\ios\1.png, D:\Product_QSG_OM\HDNVR-7R\Snapshot\ios\4.png, D:\Product_QSG_OM\HDNVR-7R\Snapshot\Screenshot_2016-10-28-11-23-17.jpg, D:\Product_QSG_OM\HDNVR-7R\Snapshot\Screenshot_2016-07-20-09-33-34.jpg, D:\Product_QSG_OM\HDNVR-7R\Snapshot\Screenshot_2016-07-20-09-37-00.jpg, D:\Product_QSG_OM\HDNVR-7R\GUI_Design\160920\96x96\_.png, D:\Product_QSG_OM\HDNVR-7R\Snapshot\ios\5.png, D:\Product_QSG_OM\HDNVR-7R\Snapshot\ios\4.png, D:\Product_QSG_OM\HDNVR-7R\Snapshot\ios\4.png, D:\Product_QSG_OM\HDNVR-7R\Snapshot\Screenshot_2016-10-28-11-01-39.jpg, D:\Product_QSG_OM\HDNVR-7R\Snapshot\Screenshot_2016-10-28-13-23-17.jpg, D:\Product_QSG_OM\HDNVR\GUI_Design\GUI_Design\camera setup\bg_0_0_n.png, G:\JSW Corp_天鉞\Symbol_Icon_Logo_配件線圖\CE.png, G:\JSW Corp_天鉞\Symbol_Icon_Logo_配件線圖\FCC.png, D:\Product_QSG_OM\HDNVR-7R\Snapshot\ios\9.png, D:\Product_QSG_OM\HDNVR-7R\Snapshot\ios\8.png, D:\Product_QSG_OM\HDNVR-7R\QSG\JSW_QSG_HDNVR-7R_V1.1.ai, D:\Product_QSG_OM\HDNVR-7R\Snapshot\ios\6.png, D:\Product_QSG_OM\HDNVR-7R\Snapshot\ios\5.png, D:\Product_QSG_OM\HDNVR-7R\GUI_Design\160920\96x96\_.png, D:\Product_QSG_OM\HDNVR-7R\GUI_Design\160920\96x96\_.png
Startup Profile                 : Print
Has Visible Overprint           : True
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 29.699996
Max Page Size H                 : 21.000217
Max Page Size Unit              : Centimeters
Font Name                       : ArialNarrow, Arial-Black, ArialMT, Arial-BoldMT, MyriadPro-It, MyriadPro-SemiboldIt, MyriadPro-Semibold, MyriadPro-SemiboldSemiCnIt, MyriadPro-SemiboldSemiCn, GFNBAA+AdobeMingStd-Light, HIBBAA+MyriadPro-Semibold, QJJAAA+MyriadPro-It, HJCBAA+MyriadPro-SemiboldSemiCnIt, PBAAAA+MyriadPro-SemiboldSemiCn, UGXAAA+MyriadPro-SemiboldIt
Font Family                     : Arial, Arial, Arial, Arial, Myriad Pro, Myriad Pro, Myriad Pro, Myriad Pro, Myriad Pro, GFNBAA+AdobeMingStd Light, HIBBAA+MyriadPro Semibold, QJJAAA+MyriadPro It, HJCBAA+MyriadPro SemiboldSemiCnIt, PBAAAA+MyriadPro SemiboldSemiCn, UGXAAA+MyriadPro SemiboldIt
Font Face                       : Narrow, Black, Regular, Bold, Italic, Semibold Italic, Semibold, Semibold SemiCondensed Italic, Semibold SemiCondensed, Light, Semibold, It, SemiboldSemiCnIt, SemiboldSemiCn, SemiboldIt
Font Type                       : Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Unknown, Unknown, Unknown, Unknown, Unknown, Unknown
Font Version                    : Version 2.37, Version 2.40, Version 3.00, Version 3.00, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, Version 2.037;PS 2.000;hotconv 1.0.51;makeotf.lib2.0.18671, Version 2.037;PS 2.000;hotconv 1.0.51;makeotf.lib2.0.18671, Version 5.00, Version 5.00, Version 5.00, Version 5.00, Version 5.00, Version 5.00
Font Composite                  : False, False, False, False, False, False, False, False, False, False, False, False, False, False, False
Font File Name                  : ARIALN_2.TTF, ariblk_1.ttf, arial_1.ttf, arialbd_1.ttf, MyriadPro-It.otf, MyriadPro-SemiboldIt.otf, MyriadPro-Semibold.otf, MyriadPro-SemiboldSemiCnIt.otf, MyriadPro-SemiboldSemiCn.otf, kaiu.ttf, kaiu.ttf, kaiu.ttf, kaiu.ttf, kaiu.ttf, kaiu.ttf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 明亮
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000004
Swatch Groups Colorants Magenta : 90.000000
Swatch Groups Colorants Yellow  : 0.003099
Swatch Groups Colorants Black   : 0.003099
Producer                        : Adobe PDF library 10.01
Page Count                      : 4
Creator                         : Adobe Illustrator CS6 (Windows)

EXIF Metadata provided by EXIF.tools