Authinx UR73A RF Remote Control User Manual 2 1033 a 3 USERS MANUAL

Authinx Inc. RF Remote Control 2 1033 a 3 USERS MANUAL

2 1033 a 3 USERS MANUAL

Download: Authinx UR73A RF Remote Control User Manual 2 1033 a 3 USERS MANUAL
Mirror Download [FCC.gov]Authinx UR73A RF Remote Control User Manual 2 1033 a 3 USERS MANUAL
Document ID118937
Application IDxvu9UKWy4ZXkrTEF2gpTZA==
Document Description2 1033 a 3 USERS MANUAL
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize0.38kB (4769 bits)
Date Submitted2000-09-27 00:00:00
Date Available2000-09-26 00:00:00
Creation Date2000-08-22 12:23:18
Producing SoftwareAcrobat Distiller 4.0 for Windows
Document Lastmod2000-08-22 12:23:22
Document Title2 1033 a 3 USERS MANUAL

Set Up and Operating Instructions for Remote Control Model UR73A
To setup for A/V functions:
Press and hold SETUP until the red lights stays on. Press and release TV, VCR, CBL, or AUX. Enter
the three digit code for your TV, VCR, etc., from the code list.
Home Control operation:
Plug in an X10 Transceiver (sold separately) and set it to Housecode A. You can control it and other
X10 modules (set to Housecode A) as follows:
Press and release any of the 4 ON-OFF rocker buttons at the bottom corresponding to the X10
Module you want to control. Set the slide switch on the side of the remote to control Modules set to
Unit Codes 1-4 OR 5-8.
To change the X10 Housecode:
The UR73A Remote defaults to Housecode A, to change this:
1. Press and hold SETUP until the red light stays on.
2. Press and release the number button corresponding to the Housecode you want:
(01=A, 02=B, 03=C .....16=P).
Note: The Housecode you choose must match the Housecode on the Transceiver and X10 Modules
you are using it with.
F.C.C. CAUTION - THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION
IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE
HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE
RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
This equipment generates and uses radio frequency energy, and if not installed and used properly, that
is, in strict accordance with the manufacturers instructions, may cause interference to radio and television
reception. It has been type tested and found to comply with the limits for remote control security devices
in accordance with the specifications in Sub-Part B of Part 15 of FCC Rules, which are designed to
provide reasonable protection against such interference in a residential installation. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause
interference to radio or television reception, which can be determined by unplugging the equipment, try
to correct the interference by one or more of the following measures.
o Reorient the antenna of the radio/TV experiencing the interference.
o Relocate the product with respect to the radio/TV.
o Move the product away from the radio/TV.
o Plug the product into an outlet on a different electrical circuit from the radio/TV experiencing the
interference. If necessary, consult your local dealer for additional suggestions.
NOTE: NO CHANGES OR MODIFICATIONS MAY BE MADE TO THE UNITS. ANY
CHANGES MADE TO THE UNITS WILL VOID THE USER'S AUTHORITY TO OPERATE THE
EQUIPMENT.
X10 (USA) Inc., 91 Ruckman Rd., Closter, NJ 07624. www.x10.com
UR73A-8/00

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Create Date                     : 2000:08:22 12:23:18
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2000:08:22 12:23:22-04:00
Page Count                      : 1
EXIF Metadata provided by EXIF.tools
FCC ID Filing: B4SUR73A

Navigation menu