Avaya Dmm Build 1 00 Release Notes
2015-06-01
: Avaya Avaya-Dmm-Build-1-00-Release-Notes-736254 avaya-dmm-build-1-00-release-notes-736254 avaya pdf
Open the PDF directly: View PDF 
.
Page Count: 4
DMM build 1.0.0
Date: November 10, 2009
DMM Release Notes
CONTENT HISTORY
Date Build # Summary of Changes
October 8, 2009 0.14 See CR list, updated Wizard, VM msg transfer,
skillset support
October 15, 2009 0.15 See CR List
October 22, 2009 0.16 See CR List
October 29, 2009 0.17 See CR List
November 3, 2009 0.18 See CR List; NOTE: Data must be re-imported
November 10, 2009 0.19 See CR List; NOTE: Data must be re-imported
November 20, 2009 0.20 See CR List; NOTE: Data must be re-imported
November 26,2009 1.0.0 See CR List; NOTE: Data must be re-imported
Build Content Overview
Build 1.0.0 contains fixes for:
CR Title type Forecast fix
Q02087356
DMM showed alarm for failing to retrieve data of DNs as
export
Q02094930
The user should be able to choose to import/export
voicemail messages
Q02094951 DMM help button to include user guide doc
Q02094872
DMM Model needs to have a version attribute
Q02094915
Summarize contiguous warnings which occur across a
range
Q02094940
DMM option to save configuration as an excel report
Nortel Page 1 of 4
Open CRs:
CR Title type Forecast fix
Q02057445 DMM does not export voicemail msgs, without EM
keycode E Not in this
release
Q02066058 DMM Internal system CDR not migrated E Not in this
release
Q02067868 DMM internal Diagnostic settings defaulted E Not in this
release
Q02067869 DMM Internal CAP assignment not Exported E Not in this
release
Q02067870 Scheduled archlogs and Backup not Exported E Not in this
release
Q02067137 DMM can not stop import when connection is lost E Not in this
release
Q02081622 DMM – Doorphone target DN not set E Not in this
release
Q02073098 Apply can run without full Data Prep being done E
Not In This
Release
Other Notes
DMM Testing Tip
For anyone that is running multiple DMM tests (i.e. multiple times performing an extract
and/or apply), please reboot your BCMs (BCM4.0 and BCM5.0) between tests since we have
found some anomalies when consecutive tests were performed when a reboot was not done.
Please ensure that the target BCM450 has the appropriate keycode allotment. Errors
will be reported if the BCM450 rejects data due to keycode status for any application.
Open Call Pilot issues:
1. If the line no longer exist or valid in BCM 5.0, the AA line administration will fail for
that line. There is currently no work around.
2. BCM 4.0 bug missing DNS in voicemail. This may show that IP migration has not tested
DNS migration.
Constraints:
Data import and export operations are out of service operations that require
occasional reboots. The reboot operation is invoked by the tool, no user intervention
required.
Data import and export operations place a heavy CPU load on the BCM, no Element
Manager connections should be active to the BCM
Keycode files for the destination BCM 450 Release 5.0 system need to be installed.
The Unified Messaging keycode is required to perform Voice Mail message
migration.
All MBMs should be installed on the BCM450 prior to performing the export operation
Nortel Page 2 of 4
Keycode should be installed on the BCM450 prior to performing the export operation
No FEM migration – too many combinations of cards and modules that the odds for
error/failure is high
Any MBM sitting in offset 3 (slot 4) on 4.0 can not be directly migrated to 5.0. It will
need to be post-DMM configured by being pulled, DIPs changed, and then re-
inserted and Configured
IP trunks to be configured + other physical trunks > 150 then a best fit algorithm will
be used
No IVR data
Call Forward All attributes (for Sets) can only be migrated if the Sets are booted on
the BCM450
When BRI modules share a bus with Loop type module (GATM, CTM, DID, etc.) in
the BCM 4.0 system, the user will be required to manually add either the BRI module
or the loop-type module during the Configure MBM phase of the Data Preparation
Wizard. The user must also indicate the bus and offset to DMM before the data can
be properly migrated.
NEW FUNCTIONALITY
Version 1.0.0 of DMM introduces the ability to save data to an Excel file in addition to the
existing XCM file. To use this capability, press the following icon:
Or Select File/Create Excel Report in the Menu
The user is prompted to supply a file name to save the report to.
An Excel report cannot be sourced into the tool. This feature is designed to allow users
to save their data in a spreadsheet format.
Software Version:
DMM Release 5.0 version 1.0.0
DMM:
S/W Distribution sites:
Livelink:
http://livelink2.ca.nortel.com/livelink/livelink.exe?func=ll&objId=44418374&objAction=browse&sort=na
me&viewType=1
The load is also available via the Application Launcher. Use the following url:
Nortel Page 3 of 4
