Axon Enterprise S00831 AXON Signal Unit User Manual

TASER International AXON Signal Unit

a href="https://usermanual.wiki/Axon-Enterprise" itemprop="url"> Axon Enterprise >

Contents

User Manual

Axon Signal Unit User Manual    Page 1 of 3  Introduction Axon Signal™ is a communication platform that allows auto activation of Axon Flex® cameras, upon activation of an emergency vehicle’s light bar. When equipped with an Axon Signal Unit, light bar activation will start recording in all enabled cameras within range to ensure events are not missed and multiple perspectives are captured. Characteristics Secure Bluetooth broadcast (30 seconds). Activates all enabled cameras in range (approximately 30 feet) Requires an in-car wireless Axon Signal Unit and an Axon Flex controller (battery pack) equipped with Axon Signal technology. Activation only turns the camera “on”; the officer ends the recording with a 3-second press of the EVENT button on the Axon Flex controller. Double-pressing the EVENT button on the Axon Flex controller after the EVENT mode is activated by the Axon Signal Unit will not interfere with recording. Radio Waves  Changes or modifications to the equipment not expressly approved by the manufacturer could void the product warranty and the user’s authority to operate the equipment. Your wireless device is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to ensure the safety of all persons, regardless of age and health. Before a device model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government‐adopted requirement for safe exposure. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
Download:
Mirror Download [FCC.gov]
Document ID2583764
Application IDEN2xaZFWj1yGecJSRBf2lw==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize38.69kB (483620 bits)
Date Submitted2015-04-14 00:00:00
Date Available2015-04-15 00:00:00
Creation Date2015-03-30 16:50:15
Producing SoftwareMicrosoft® Word 2013
Document Lastmod2015-03-30 16:50:15
Document TitleUser Manual
Document CreatorMicrosoft® Word 2013
Document Author: Phillip Park
FCC ID Filing: X4GS00831

Navigation menu