BUFFALO 09101744-0 2.4 GHz WLAN Cardbus card User Manual

BUFFALO INC. 2.4 GHz WLAN Cardbus card

a href="https://usermanual.wiki/BUFFALO" itemprop="url"> BUFFALO >

User Manual

WWW.BUFFALOTECH.COM/WIRELESS®54Mbps Wireless Notebook Adapter-g User ManualWLI-CB-G54A®Technical Support is available 24 hours a day,7 days a week,Toll-Free:866-752-6210email:info@buffalotech.com4030 W.Braker Ln.Suite 120Austin,Texas 78759Tel:800-456-9799Fax:512-794-8606
1254 Mbps Wireless Notebook Adapter-gWindows XPInstallation & Configuration1. Installing the Wireless Notebook Adapter-g Drivers:a.Insert the AirNavigator CD into the CD-ROM drive of the notebook. The AirNavigator Setup Wizard launches automatically. If the Air Navigator Setup Wizarddoes not launch automatically,launch the wizard manually by selecting Start>>Runto open the Run dialog box.Enter D:\Setup.exe in the Open field. D:represents the letter assigned to the CD-ROM drive. If another letter is assignedto the CD-ROM drive,your command should refelect that difference. Click theOK button to launch the wizard.b.Select Install Wireles Adapter. Click the OK button to begin the installationprocess.c.Review the Software License Agreement. Click the Yes button to confirm youragreement with the terms and continue installing the Wireless Notebook Adapterdrivers. Click the No button to abort the installation process.2. Installing the Wireless Notebook Adapter-g:a.Insert the Wireless Notebook Adapter,with the Buffalo logo facing up, into anavailable CardBus slot. CardBus slots are usually located on the left or right side ofthe notebook. Once the Wireless Notebook Adapter is installed correctly, theFound New Hardware Wizard will launch automatically. If the Found NewHardware Wizard does not launch,remove the Wireless Notebook Adapter andrestart the notebook. Re-insert the Wireless Notebook Adapter once thenotebook has rebooted.b.Select Install the software automatically. Click the Next button.c.Select the driver you want to install. If multiple drivers are listed,select the mostrecent driver version. Click the Next button.d.If a window opens,stating that your driver does not pass Windows Logo testing,click the Continue Anyway button. When the Wireless Notebook Adapter issuccessfully installed,click the Finish button. Restart your notebook if prompted.
3 43.Configuring Wireless Zero Configuration Service:a.If the Wireless Zero Configuration Service is activated,Windows will scan foravailable wireless access points once the Wireless Notebook Adapter is properlyinstalled.If Windows detects one or more access points,a networking icon appearson the task bar. One or more wireless networks are available appears as acaption accompanying the icon.b.Right click the networking icon in the taskbar and select View Available WirelessNetworks to display a list of available wireless networks. Select an access pointnetwork name or SSID and click the Connect button to establish a connection.You may need to check the box indicating you are connecting to an unsecurednetwork. See step Cif you need to enter an SSID network name or WEP/WPAencryption key.c.Click the Advanced button to enter an SSID network name or WEP/WPAencryption key,if either is necessary. To add an SSID network name that is notavailable, click the Add button.e.To configure a WEP/WPA encryption key,select the appropriate wireless networkand click the Configure button.f. From the pull down menu,select the appropriate Network Authentication and DataEncryption for the wireless network. Enter and confirm the Network Key and KeyIndex. Click the OK button when finished.Note: Buffalo Technology recommends that users of the Wireless Zero ConfigurationService upgrade to the latest version freely available at:http://www.microsoft.com.For advanced support in using Window’s XP’s Wireless Zero Configuration Service, referto the Buffalo Support Web Site:http://www.buffalotech.com/wireless/supportNote: If the Wireless Zero Configuration Service is not functioning,selectStart>Control Panel>Administrative Tools>Services. Select Automatic inthe Startup Type field of Wireless Zero Configuration Service to enable theWireless Zero Configuration Service.The default value of Wireless ZeroConfiguration Service is Automatic.
Download:
Mirror Download [FCC.gov]
Document ID344935
Application ID9KnqlyVKC8J3BWX/XgZGJA==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize33.46kB (418195 bits)
Date Submitted2003-08-01 00:00:00
Date Available2003-08-01 00:00:00
Creation Date2003-07-18 16:25:41
Producing SoftwareAcrobat Distiller 6.0 for Macintosh
Document Lastmod2003-08-01 08:44:58
Document Titleuntitled
FCC ID Filing: FDI-09101744-0

Navigation menu