BandRich R250 3.5G/HSPA WLAN Router User Manual BandLuxe FieldPerfect

BandRich Inc. 3.5G/HSPA WLAN Router BandLuxe FieldPerfect

UserManual.wiki >

BandRich >

R250 User Manual >

User manual UZI R250 rev01 HTML Version

1. User manual UZI R250 rev01
2. User manual UZI R250 rev01

User manual UZI R250 rev01

User

Manual

BandLuxe

R300 Series

HSPA+ WLAN Router

R200 Series

HSPA WLAN Router

Table of Contents

Table of Contents .....................................................................1

Package Contents ....................................................................3

Package Contents.................................................................................3

Features................................................................................................3

Hardware Overview...............................................................................4

Installation ................................................................................6

Wizard Setup.............................................................................9

Internet Setup .........................................................................11

Basic Setting .......................................................................................11

DDNS..................................................................................................15

Optional...............................................................................................16

Router Setup...........................................................................18

Network Setting...................................................................................18

Advanced Routing...............................................................................20

WiFi Setup...............................................................................22

Basic WiFi Network.............................................................................22

WiFi Security.......................................................................................23

Advanced WiFi Setting........................................................................27

WiFi Clients Filter................................................................................29

3.5G HSPA Setup....................................................................30

PIN Verification....................................................................................30

PIN Management ................................................................................30

Preferred Network...............................................................................31

Security Setup ........................................................................32

Firewall................................................................................................32

Internet Access Policy.........................................................................35

Single Port Forward ............................................................................37

Port Range Forward............................................................................38

Port Range Trigger..............................................................................39

QoS.....................................................................................................40

Table of Contents

Admin Setup........................................................................... 42

Management ...................................................................................... 42

Diagnosis............................................................................................ 44

Recover & Renewal............................................................................ 45

Status...................................................................................... 47

3.5G HSPA & Internet......................................................................... 47

Router................................................................................................. 48

Appendix A: FAQ ................................................................... 50

Appendix B: Specification .................................................... 57

Appendix C: Important Safety Information and Glossary.. 60

Europe – EU Declaration of Conformity ............................................. 60

Federal Communication Commission Interference Statement ........... 61

Glossary ............................................................................................. 63

Package Contents

Thank you for your purchase of this HSPA+/HSPA WLAN Router. This

product is designed to access the Internet via 3.75G technology and

share the bandwidth through a WiFi network. It is easy to configure and

operate even for non-technical users. This manual contains instructions

for installing and configuring the product. Read the manual carefully

before you use the product, so that you can fully exploit the product

functions.

Package Contents

HSPA+/ HSPA WLAN Router Power Adaptor User Manual CD

Features

- HSPA+/HSPA WLAN Router

- Uplink up to 5.7 Mbps

Downlink up to -- R300 Series: 21/ 28.8 Mbps

R200 Series: 7.2 Mbps

- Support WiFi 802.11 b/g/Pre-n

- R300 -- UMTS: 850/900/1900/2100 MHz

GSM: 850/900/1800/1900 MHz

- R302 -- UMTS: 2100 MHz

- R305 -- UMTS: AWS Band

- R307 -- UMTS: 850/1900 MHz

GSM: 850/900/1800/1900 MHz

Package Contents

- R250 -- UMTS: 850/1900/2100 MHz

GSM: 850/900/1800/1900 MHz

- Support WAN/LAN Ethernet Port

- Optional External 3G Antenna Port Ready

- Sleek Design and Easy to Use

Hardware Overview

1 Reset Button To reset the Router, press the reset button

briefly.

To restore the Router's factory settings, press

the reset button for longer than 5 sec.

2 3G External

Antenna Port To connect to the 3G External Antenna if

needed.

3 SIM Slot Insert SIM/USIM. Push-push type.

4 WAN Port Connect a DSL or Cable modem.

5 LAN Port Connect Ethernet devices such as computers,

switches, and hubs.

6 Power Switch To switch on/off the router.

Package Contents

7 Power Receptor Receptor for the Power Adaptor.

8 UMTS LED Reference below table.

9 Roaming LED Solid light shows the Router is connecting to

Roaming network.

10 WLAN LED Solid light indicates that the wireless segment is

ready.

Flashing light shows that data is being

transmitted via WLAN.

11 Ethernet LED Solid light shows that an Ethernet-enabled

computer is connected via the LAN port but no

data is being transmitted.

Flashing light shows that data is being

transmitted via LAN.

12 DIAG LED Reference below table.

13 Power LED Solid light indicates that the power supply is

connected properly.

14 3G Radio On/Off &

Signal Strength

Button

Short press – Enable Signal Strength indication

for 3 sec.

Long press (>5 sec) – 3G radio on/off

15 3G Radio Signal

Strength Indicator Indicates the 3G signal strength when 3G Radio

button is in short press.

Table for UMTS and DIAG LED:

Operation status UMTS DIAG

Error in Router OFF Solid

Fail to boot module Solid Red Flashing

No SIM exist Flashing Red OFF

Waiting for PIN entering Flashing Red OFF

No network/Searching for network Flashing Red OFF

3G camped Flashing Green/Pink OFF

3G connected Solid Blue/Green/Pink OFF

Note: Pink for UMTS LED is available by product if 2G is available.

Installation

1. Connect the power adaptor to the Router and connect it to an outlet.

2. Insert your SIM card into the slot on the Router, making sure the SIM

card orientation matches the SIM card slot, as shown in the picture.

3. Turn on the Power switch.

Installation

4. One of the following two methods can be chosen to link your Router

with PC.

A. To link the Router with your PC via WiFi, in Microsoft Windows, go to

Control Panel > Network Connections, right-click on Wireless

Network Connection, and choose View Available Wireless

Networks. Select the HSPA_ROUTER wireless network, and click

Connect.

B. To link the Router with your PC via Ethernet cable, connect one end

of the cable to the LAN port on the Router, and the other end of the

cable to the Ethernet port on your computer.

. Note: If you choose to access the Internet via Ethernet,

connect one end of the cable to the WAN port of Router, and

the other end to your xDSL/Cable Modem.

The Router uses a web-based configuration utility. To access the

configuration utility, open a browser (for example Internet Explorer) and

enter the IP address (http://192.168.1.1) or the URL

Installation

(http://R300.ROUTER) for the Router in your browser’s address bar.

Enter the Router User name (admin) and Password (hsparouter).

Wizard Setup

User can set preferred settings step by step via Wizard. If the router is in

Factory default settings, the GUI will always open Wizard. User can set

the Wizard via Basic Setting> Network Setting > Basic WiFi Network >

WiFi Security.

Wizard Setup

Internet Setup

Basic Setting

Connection Type

The Router can link to the internet via 3.5G HSPA or Ethernet. Select the

connection type you prefer.

3.5G HSPA Setting

Get Latest APN Database

Get the latest Profile Name, Number, User Name, Password, and APN

from the web site automatically.

Roaming Connection

To allow roaming network connection, select Enabled. To block roaming

connection, select Disabled.

Internet Setup

. Note: Charges for roaming connection may be high. Contact

your mobile network operator for more information.

APN Setting

The APN (Access Point Name) is provided by your mobile network

operator. You can choose to set the APN automatically or manually. In

most cases, the Router works properly when the APN is set to Auto.

To set the APN manually, contact your mobile network operator for the

APN, User Name and Password of the data service.

Authentication Type Setting

To allow user to set PAP (Password Authentication Protocol) or CHAP

(Challenge Handshake Authentication Protocol).

Connection

On Demand: You can set the idle time for the 3.5G HSPA connection.

When the Router is idle, the connection will be disconnected

automatically after the idle time expires.

Keep Alive: The connection is always kept on. If the HSPA connection is

disconnected, the Router tries to reconnect.

Ethernet Setting

Automatic Configuration - DHCP

Choose Dynamic IP Address to obtain IP Address information

automatically from your ISP. Select this option if your ISP does not give

you any IP numbers to use. This option is commonly used for cable

modem services.

Internet Setup

Static IP

Select Static IP if all WAN IP information is provided to you by your ISP.

You will need to enter the IP address, subnet mask, gateway address,

and DNS address(es) provided to you by your ISP.

PPPoE

Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a

PPPoE connection. Your ISP will provide you with a username and

password. This option is typically used for DSL services.

Service Name: Enter the ISP Service Name (optional).

Connect on Demand: Enter a maximum idle time during which the

Internet connection is maintained during inactivity.

Keep Alive: If you select this option, the Router will periodically check

your Internet connection. If you are disconnected, then the Router

automatically tries to re-establish your connection. To use this option,

select Keep Alive. In the Redial Period field, specify how often you want

the Router to check the Internet connection.

Internet Setup

PPTP

Choose PPTP (Point-to-Point-Tunneling Protocol) if your ISP uses a

PPTP connection. Your ISP will provide you with a username and

password.

Internet IP Address: Enter the IP address

Subnet Mask: This is the Router’s Subnet Mask, as seen by users on the

Internet (including your ISP). Your ISP will provide you with the Subnet

Mask.

Server IP Address: Enter the Server IP provided by your ISP (optional).

L2TP

Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP

connection. Your ISP will provide you with a username and password.

Internet IP Address: Enter the IP address provided by your ISP.

Connect on Demand: Enter a maximum idle time during which the

Internet connection is maintained during inactivity.

Keep Alive: Redial Period If you select this option, the Router will

periodically check your Internet connection. If you are disconnected, the

Router automatically tries to re-establish your connection. To use this

option, select Keep Alive. In the Redial Period field, you specify how

often you want the Router to check the Internet connection.

Internet Setup

DDNS

DDNS (Dynamic DNS Service) is a system which allows the domain

name data held in a name server to be updated in real time. It allows an

Internet domain name to be assigned to a computer with a varying

(dynamic) IP address. Before you can use this feature, you need to sign

up for DDNS service with a DDNS service provider, www.dyndns.org or

www.TZO.com.

Service Type: From the drop-down list, select your DDNS service type.

User name: Enter the user name for your DDNS account.

Password: Enter the password for your DDNS account.

Host name: The Host Name is optional but may be required by some

ISPs.

WildCard: Some DDNS servers support the wildcard alias feature which

points *.yourhost.dyndns.org to your computers automatically. All aliases

for your domain such as www.yourhost.dyndns.org will point to your

computer by default due to Wildcard Alias. This allows users to access

your computer using all types of derivatives of your domain name.

Internet IP Address: The Router’s Internet IP address is displayed here.

Because it is dynamic, it changes.

Status: This shows whether the DDNS service is enabled or disabled.

Internet Setup

Optional

Host Setting

Host Name and Domain Name

These fields allow you to assign a host and domain name for the Router.

Some ISPs require these names as identification. In most cases, leaving

the fields blank will work.

MTU

MTU (Maximum Transmission Unit) specifics the largest packet size

permitted for Internet transmission. To have the Router select the best

MTU for your Internet connection, keep the default setting, Auto.

MAC Address Clone

Some ISPs will require you to register a MAC address in order to access

the Internet. If you do not want to re-register the MAC address with your

ISP, you can assign the MAC address you have currently registered with

your ISP to the Router by clicking the Clone My PCs MAC button.

Internet Setup

Time Setting

Select the Time Zone from the drop-down menu according to your current location.

Automatically adjust clock for daylight saving changes: Select the

checkbox to enable Daylight Saving time.

Router Setup

Network Setting

Router IP

This is the Router’s IP address and subnet mask which is seen in your

local network. The default IP address is 192.168.1.1, and the default

Subnet Mask is 255.255.255.0. Keeping the default values will work.

DHCP Service

DHCP stands for Dynamic Host Control Protocol. The DHCP Server will

automatically assign an IP address to the computers on the LAN/private

network. If the Router’s DHCP server option is enabled, make sure there

is no other DHCP server on your network.

Router Setup

DHCP Reservation

To assign the same IP address to a PC every time it reboots, click the

DHCP Reservation button.

A list of DHCP clients is displayed with the following information: Client

Name, Interface, IP Address, and MAC Address. Select a checkbox to

reserve a client’s IP address. To add clients, click Add Clients. To

manually assign an IP address, enter the client’s name in the Enter

Client Name field. Enter an IP address in the Assign IP Address field.

Enter a MAC Address in the To This MAC Address field. Click Add. A list

of DHCP clients and their fixed local IP addresses is displayed at the

bottom of the screen. If you want to remove a client from this list, click

Remove. To view the most up-to-date information, click Refresh.

Start IP Address: Enter a starting IP address for the DHCP server’s IP

assignment.

Maximum Number of Users: Enter the maximum number of PCs that

you want the DHCP server to assign IP addresses to.

DHCP Lease Time: The length of time for the IP address lease. Enter the

lease time in minutes.

Static DNS (1-3): The Domain Name System (DNS) is how the Internet

translates domain or website names into Internet addresses or URLs.

Your ISP will provide you with at least one DNS Server IP Address. You

can enter up to three DNS Server IP Addresses here. The Router will use

these for quicker access to functioning DNS servers.

WINS: The Windows Internet Naming Service (WINS) manages each

PC's interaction with the Internet. If you use a WINS server, enter that

server’s IP Address here. Otherwise, leave this blank.

Router Setup

Advanced Routing

NAT Setup

The Network Address Translation (NAT) service is a standard that allows

multiple computers on a private network to share a single IP address.

RIP

The Routing Information Protocol (RIP) helps the Router dynamically

adapt to changes of network connections by communicating information

about which networks each Router can reach and how far away those

networks are.

Static Routing

This section allows you to define fixed routes to defined destinations.

Route Entry: To set up a static route, select a number from the

drop-down list.

Router Setup

Enter Route Name: Enter a name for the route here.

Destination LAN IP: Enter the Destination IP address that will be

assigned to a specific network or host.

Subnet Mask: Enter the subnet mask associated with the Destination IP.

Gateway: This is the IP address of the gateway device that allows for

contact between the Router and the remote network or host.

Interface: This interface tells you whether the Destination IP Address is

on the LAN & Wireless (Ethernet and wireless networks) or the WAN

(Internet).

Show Routing Table: Click Show Routing Table to open a screen

displaying how data is routed through your local network. Click Refresh

to update the information.

VPN Passthrough

A Virtual Private Network (VPN) is a type of secured private network

connection, built upon publicly-accessible infrastructure such as the

Internet. They usually provide connectivity to various devices behind a

gateway or firewall.

IPSec Passthrough

IP Security (IPSec) provides authentication and encryption. Since it is

mainly a Layer 3 technology, it can secure all data on the network. To

allow IPSec tunnels to pass through the Router, click Enabled.

PPTP Passthrough

Point-to-Point Tunneling Protocol (PPTP) allows you to establish a

connection to an enterprise network. To allow PPTP tunnels to pass

through the Router, click Enabled.

L2TP Passthrough

Layer 2 Tunneling Protocol (L2TP) is an extension of the Point-to-Point

Tunneling Protocol and is also used to establish virtual private networks.

To allow L2TP tunnels to pass through the Router, click Enabled.

WiFi Setup

Basic WiFi Network

Basic WiFi Setting

Network Mode: From this drop-down menu, you can select the wireless

standards running on your network. If you have 802.11g, 802.11b,

802.11n devices in your network, keep the default setting, Mixed. If you

have only 802.11g devices, select Wireless-G Only. If you have only

802.11b devices, select Wireless-B Only. If you do not want to use any

WiFi network, select Disabled.

Network Name (SSID): Network Name is used for identifying the

Wireless LAN (WLAN).

Standard Channel: The radio channel number. The permissible

channels depend on the Regulatory Domain (e.g in the USA, it is 1 to 11).

SSID Broadcast: Disable this function will let your SSID setting not be

exposed to view in the air. For security purposes, you may choose to hide

your network’s SSID by selecting Disable from the drop-down list. This

will prevent computers scanning for the presence of wireless networks to

detect your network name.

WiFi Setup

WiFi Security

WiFi Security Setting

Router provides several different levels of security to protect your WiFi

network. Select a level in the Security Mode drop-down menu.

WEP

The Router supports two WEP (Wired Equivalent Privacy) standards:

64-bit and 128-bit. Select a standard from the drop-down list. The 64-bits

encryption requires 10 hexadecimal digits (letters a-f and numbers 0-9

are valid). The 128-bits encryption requires 26 hexadecimal digits (letters

a-f and numbers 0-9 are valid).You can set up to four different keys.

Passphrase: Strings of hexadecimal characters are not easy to

remember. This conversion utility converts a simple word or phrase into

hex, so that you can easily remember and regenerate the pass-phrase.

TX Key: You can specify which key you want to use for the WiFi network.

WPA, or WiFi Protected Access, is a WiFi standard that was designed to

improve the security features of WEP. WPA uses two encryption methods,

TKIP and AES, with dynamic keys.

WiFi Setup

WPA-Personal

Encryption: Choose TKIP or AES from the drop down list. (AES is a

stronger encryption method than TKIP.)

Passphrase: Enter a passphrase between 8-63 characters.

Key Renewal: Enter a key renewal value to tell the Router how often it

should change the encryption keys. The value must be between

60-99999.

WPA2-Personal

WPA2 is a more advanced, more secure version of WPA.

Encryption: Choose AES, or WPA-TKIP, or WPA2-AES from the drop

down list.

Passphrase: Enter a passphrase between 8-63 characters.

Key Renewal: Enter a key renewal value to tell the Router how often it

should change the encryption keys. The value must be between

60-99999.

WiFi Setup

WPA-Enterprise

This option features WPA used in coordination with a RADIUS server.

(This should only be used when a RADIUS server is connected to the

Router.)

Encryption: Choose TKIP or AES from the drop down list. (AES is a

stronger encryption method than TKIP.)

RADIUS Server: Enter the IP Address of the RADIUS server.

RADIUS Port: Enter the port number of the RADIUS server. The default

value is 1812.

Shared Key: Enter the key shared between the Router and the server.

Key Renewal: Enter a key renewal value to tell the Router how often it

should change the encryption keys. The value must be between

60-99999.

WPA2-Enterprise

This option features WPA2 used in coordination with a RADIUS server.

(This should only be used when a RADIUS server is connected to the

Router.)

Encryption: Choose AES or WPA-TKIP or WPA2-AES from the drop

down list.

WiFi Setup

RADIUS Server: Enter the IP Address of the RADIUS server.

RADIUS Port: Enter the port number of the RADIUS server. The default

value is 1812.

Shared Key: Enter the key shared between the Router and the server.

Key Renewal: Enter a key renewal value to tell the Router how often it

should change the encryption keys. The value must be between

60-99999.

RADIUS

RADIUS stands for Remote Authentication Dial-In User Service. It is a

networking protocol that uses access servers to provide centralized

management of access to large networks.

RADIUS Server: Enter the IP Address of the RADIUS server.

RADIUS Port: Enter the port number of the RADIUS server. The default value is

1812.

Shared Key: Enter the key shared between the Router and the server.

Encryption: Select either 64-bits or 128-bits from the drop-down list The 64-bits

encryption requires 10 hexadecimal digits. The 128-bits encryption requires 26

hexadecimal digits .You can set up to four different keys.

Passphrase: Strings of hexadecimal characters are not easy to remember. This

conversion utility converts a simple word or phrase into hex, so that you can easily

remember and regenerate the pass-phrase.

TX Key: You can specify which key you want to use for the WiFi network.

WiFi Setup

Disabled

If you do not want to use any security method for your wireless network,

choose Disabled.

Advanced WiFi Setting

AP Isolation: This isolates all wireless clients and wireless devices on

your network from each other. Wireless devices will be able to

communicate with the Router but not with each other.

Frame Burst: Enabling this option may provide your network with greater

performance.

Authentication Type: The default is Open System authentication, where

the sender and the recipient do not use a WEP key for authentication. To

use a WEP key for authentication, select Shared Key.

Basic Rate: The Basic Rate setting is not actually one rate of

transmission but a series of rates at which the Router can transmit. The

Router advertises its Basic Rate to the other wireless devices in your

network, so they know which rates are used. The Router also advertises

that automatically selects the best rate for transmission. The default

setting is Auto, where the Router can transmit at all standard wireless

rates. The Basic Rate is not the actual rate of data transmission. If you

want to specify the Router’s rate of data transmission, configure the

Transmission Rate setting.

WiFi Setup

Transmission Rate: The rate of data transmission should be set

depending on the speed of your wireless network. You can select from a

range of transmission speeds.

CTS Protection Mode: CTS (Clear To Send) is a function used to

minimize collisions among wireless devices on a wireless local area

network (LAN). The default setting is Auto and the Router automatically

uses CTS Protection Mode when your Wireless-G products are

experiencing severe problems and are not able to transmit to the Router

in an environment with heavy traffic. This function boosts the Router’s

ability to catch all Wireless-B and Wireless-G transmissions, but it

severely decreases performance.

Beacon interval: Beacons are packets sent by an Access Point to

synchronize a wireless network. Specify a value. 100 is the default

setting.

DTIM Interval: The default setting for DTIM (Delivery Traffic Indication

Message) is 3. A DTIM is a countdown informing clients of the next

window for listening to broadcast and multicast messages.

Fragmentation Threshold: The fragmentation threshold, which is

specified in bytes, determines whether packets will be fragmented.

Packets exceeding the setting value will be fragmented before

transmission. 2346 is the default setting.

RTS Threshold: This value should remain at its default setting of 2347. If

inconsistent data flow is a problem, only a minor modification should be

made.

WiFi Setup

WiFi Clients Filter

You can allow or deny specific users to access your wireless network by

using the WiFi Clients Filter.

Service: To use the WiFi Clients Filter, select Enabled. To disable it, select

Disabled.

Filtering By: You can filter users by two methods: Prevent the listed PCs from

accessing the wireless network, or Permit the listed PCs to access the wireless

network. Select the method you want.

Filtered Client List

Enter MAC addresses in the Filtered Client List section, and click Save Settings.

To display a list of network users, click Wireless Client List.

3.5G HSPA Setup

PIN Verification

If your SIM card PIN protection is enabled, you must enter the PIN code

for verification. Enter the code in the PIN Code field, and click Verify.

PIN Management

U/SIM's PIN Management

After your SIM card is verified, you can enable or disable the PIN protection

on your SIM card. Select Enabled or Disabled, and click Apply.

3.5G HSPA Setup

U/SIM's Change PIN

You can change the PIN code on the SIM card. Enter your original PIN

code in the Old PIN Code field, enter the new PIN code in the New PIN

Code field and the New PIN Confirm field, and click Change.

Preferred Network

Network Type: In the drop-down menu, select the network type your SIM

card supports. If you do not know the network type, select Auto.

Network Selection

To select the mobile network operator automatically, in the Select

Network field, select Auto. To select the operator from a list, select

Manual and click Rescan. The list is displayed below. Select the mobile

network operator you are currently using on your SIM card.

Security Setup

Firewall

This tab is used to configure a firewall that filters out various types of

unwanted traffic on the Router’s local network.

SPI Firewall Protection

The SPI (stateful packet inspection) firewall is programmed to recognize

legitimate packets for different types of connections. Only packets

matching a known connection state will be allowed by the firewall; others

will be rejected.

Internet filter services

Filter Anonymous Internet Requests: This feature makes it more

difficult for outside users to work their way into your network.

Filter Multicast: Multicasting allows for multiple transmissions to specific

recipients at the same time. If multicasting is permitted, the Router allows

Security Setup

IP multicast packets to be forwarded to the appropriate computers.

Security Setup

Filter Internet NAT Redirection: To use port forwarding to block access

to local servers from local networked computers, select Filter Internet

NAT Redirection.

Filter IDENT (Port 113): This feature keeps port 113 from being scanned

by devices outside of your local network.

Web filter services

Using the Web Filters feature, you may enable up to four specific filtering

methods.

Proxy: Use of WAN proxy servers may compromise the Router's security.

Select this option to disable access to any WAN proxy servers.

Java: Java is a programming language for websites. Select this option to

disable Java. If you disable Java, you run the risk of not having access to

Internet sites created using this programming language.

ActiveX: ActiveX is a programming language for websites. Select this

option to disable ActiveX. If you disable ActiveX, you run the risk of not

having access to Internet sites created using this programming language.

Cookies: A cookie is data stored on your PC and used by Internet sites

when you interact with them. Select this option to disable cookies.

DMZ service

When a firewall is used, it is sometimes necessary to place some clients

(for example Internet games, video conferencing, or VPN connections)

outside of the firewall while leaving the others protected. You can do this

using a Demilitarized Zone. This feature allows you to specify the IP

address of the computers that are placed outside the firewall of your

network.

Source IP Address

If you want to allow any Internet IP address to access the exposed

computer, select Any IP Address. If you want to allow a specific IP

address or range of IP addresses to access the exposed computer, select

the second option and enter the IP address or range of IP addresses in

the fields provided.

Destination

Enter the IP address or MAC address of the computer you want to

expose.

Security Setup

Internet Access Policy

Access can be managed by a policy. Use the settings on this screen to

establish and access policies. To display a policy’s settings, select the

policy from the drop-down menu. To delete a policy, select the policy’s

number and click Delete This Policy. To view all the policies, click

Summary. To delete multiple policies, in the Summary screen, selecting

the policies and click Delete).

Security Setup

To create an Internet access policy:

1. Select a number from the Access Policy dropdown menu.

2. Enter a policy name in the field provided.

3. To enable the policy, select Enabled.

4. To select which PCs are affected by the policy, click Edit List. The List

of PCs screen appears. You can select a PC by MAC Address or IP

Address. You can also enter a range of IP Addresses if you want the

policy to affect a group of PCs. After making your changes, click Save

Settings to apply your changes or Cancel Changes to cancel your

changes. Then click Close.

5. Select the appropriate option, Deny or Allow, depending on whether

you want to block or allow Internet access for the PCs you listed on the

List of PCs screen.

6. Decide which days and what times you want this policy to be enforced.

Select the individual days during which the policy will be in effect, or

select Everyday. To set times for the policy, select 24 Hours, and

enter the times you want.

7. To filter websites by URL, enter URLs in the Website Blocking by

URL Address fields. To filter websites by keywords, enter keywords in

the Website Blocking by Keyword fields.

8. To filter access to various services accessed over the Internet, such as

FTP or telnet, select services in the Applications column, and click

Add to add them to the Blocked List. (You can only add up to 3

applications.) You can also add an application into the Applications

column. Enter the information in the Application Name, Port Range

Security Setup

and Protocol fileds, and click Add.

Single Port Forward

Single Port Forwarding

Port Forwarding allows you to set up public services on your network,

such as web servers, ftp servers, e-mail servers, and other specialized

Internet applications. To forward a port, enter the information in each field.

Application Name: You can select an application from the 10 preset applications

in the drop-down menu. For custom applications, enter the name of your application in

one of the available fields.

External Port: Enter the port number of external ports used by the server or

Internet application.

Internal Port: Enter the port number of internal ports used by the server or Internet

application.

Protocol: Select the protocol used for this application: TCP, UDP, or Both.

To IP address: For each application, enter the IP address of the PC running the

specific application.

Enabled: To enable port forwarding for the application, select Enabled.

To apply the changes, click Save Settings.

Security Setup

Port Range Forward

Port Range Forwarding

Port Range Forwarding allows you to set up public services on your

network, such as web servers, ftp servers, e-mail servers, and other

specialized Internet applications.

Application Name: Enter the name of your application.

Start - End Port: Enter the number that starts the port range in the left

field and the number that ends the range in the right field.

Protocol: Select the protocol used for this application: TCP, UDP, or

Both.

To IP address: For each application, enter the IP address of the PC

running the specific application.

Enabled: To enable port forwarding for the application, click the Enabled

checkbox to enable port forwarding for the relevant application.

To apply the changes, click Save Settings.

Security Setup

Port Range Trigger

Port Range Triggering

This feature allows the Router to watch outgoing data for specific port

numbers. The Router remembers the IP address of the computer that

sends the matching data, so that when the requested data returns

through the Router, the data is pulled back to the proper computer by way

of IP address and port mapping rules.

Application Name: Enter the application name of the trigger.

Triggered Range: For each application, enter the triggered port number

range. Check with the Internet application documentation for the port

number needed. Enter the starting port number of the Triggered Range in

the left field. Enter the ending port number of the Triggered Range in the

right field.

Forwarded Range: For each application, enter the forwarded port

number range. Check with the Internet application documentation for the

port number needed. Enter the ending port number of the Triggered

Range in the right field.

Enabled: To enable port triggering for the application, select Enabled.

Security Setup

QoS

QoS Control

Quality of service is the ability to provide different priorities to different

applications, users, or data flows, or to guarantee a certain level of

performance to a data flow.

Wireless

WMM Support: If no devices on your network support WMM, select

Disabled. Otherwise, keep the default, Enabled.

No Acknowledgement: If the Router’s Acknowledgement feature is

disabled, the Router will not re-send data if an error occurs, then keep the

default, Disabled. Otherwise, select Enabled.

Internet Access Priority

You can set the Internet bandwidth priority for a variety of applications

and devices. There are four levels priority: High, Medium, Normal, and

Low. To use the Internet Access policies you set, select Enabled.

Category

There are four categories available. Select one of the categories and

proceed to the instructions for your selection.

Security Setup

To add an online games or applications:

1. Select the appropriate online games or applications.

2. Select the appropriate priority: High, Medium, Normal, or Low.

3. Click Add to save your changes.

To add a new online games or applications:

1. Select Add a New Game/Application.

2. Enter any name to indicate the name of the entry.

3. Enter the port range that the application will be using. You can have up to three

ranges to define for this bandwidth allocation. Port numbers can range from 1 to

65535.

4. Select the protocol TCP or UDP, or select Both.

5. Select the appropriate priority: High, Medium, Normal, or Low.

6. Click Add to save your changes.

To add an MAC address:

1. Enter a name for your device.

2. Enter the MAC address of your device.

3. Select the appropriate priority: High, Medium, Normal, or Low.

4. Click Add to save your changes.

To add a Voice Device:

1. Enter a name for your voice device.

2. Enter the MAC address of your voice device.

3. Select the appropriate priority: High, Medium, Normal, or Low.

4. Click Add to save your changes.

Summary

This lists the QoS entries you have created for your applications and

devices. Select Edit to edit an item or Remove to remove the item.

Preset items cannot be edited.

Admin Setup

Management

Router Access

You can change the Router’s password here. Enter the password you want to set in

the Router Password field, and re-enter it in the Re-Enter to confirm field.

Then click Save Settings.

Web Access

Web Utility Access: HTTP (HyperText Transport Protocol) is the

communications protocol used to connect to servers on the World Wide

Web. HTTPs uses SSL (Secured Socket Layer) to encrypt data

transmitted for higher security.

Web Utility Access via Wireless: If you are using the Router in a public

domain where you are giving wireless access to your guests, you can

disable wireless access to the Router’s web-based utility. The wireless

Admin Setup

access to the Router web-based utility can be disabled. If you disable the

setting, you are only able to access the web-based utility via a wired

connection.

Remote Access

Remote Management: To access the Router remotely, from outside the

network, select Enabled.

Web Utility Access: Choose to access the Router via HTTP or HTTPs.

Remote Upgrade: To enable remote upgrade of the Router, select

Enabled.

Allow Remote IP Address: To allow any IP address to access to access

the Router, select Any IP Address. To allow a specific range of IP

addresses to access the Router, enter IP addresses.

Remote Management Port: Enter the port number that will be open to

outside access.

UPnP

UPnP: Universal Plug and Play (UPnP) is a set of computer network

protocols that allows compatible devices to be ready to work without any

configuration once they are connected to the network.

Allow Users to Configure: To enable manual changes to the Router

while using the UPnP feature, keep the default setting, Enabled. To

disable manual changes, select Disabled.

Allow Users to Disable Internet Access: To prohibit users from

accessing the Router web-based utilities, keep the default setting,

Disabled. Otherwise, select Enabled.

Admin Setup

Diagnosis

Log

The Router can keep logs of all traffic for your Internet connection. To

monitor the network, select Enabled.

You can view logs by clicking View Log. If you want to view logs in a

browser, enter an IP address in the Logviewer IP Address field. You can

enter this IP in a browser to view logs.

Ping Test

To check the status of a connection, enter the IP address or URL that you

want to ping in the IP or URL Address field, define the packet size you

want to use in the Packet Size field, And select the number of times you

wish to ping: 5, 10, 15, or Unlimited. Click Start Test to begin the ping

test. A new screen displays the test results.

Traceroute Test

To test the performance of a connection, enter a URL or IP address in the

IP or URL Address field, and click Start Test. A new screen displays the

test results.

Admin Setup

Recover & Renewal

Backup and Restore

Backup Configurations

Click Backup Configurations to back up your Router's current

configuration. In the file dialog box, select a location and file name for the

configuration file.

Restore Configurations

Click the Restore Configurations. In the file dialog box, click Browse to

locate the configuration file, and click Restore.

Factory Defaults

To reset the Router's configuration settings to the default values, click

Restore Factory Default.

APN Update

To update the APN database, click Get Latest APN Database. In the

Admin Setup

dialog box, click Start.

Router Upgrade

To upgrade the Router's firmware, click Browse and locate the latest

firmware upgrade file. After the file is located, click Start Upgrade. The

upgrade progress is displayed.

; Warning: Upgrading firmware may take a few minutes; do not

turn off the power or press the Reset button during upgrade.

Status

3.5G HSPA & Internet

Signal Quality

When you access the Internet via 2G or 3G, click Refresh to show the

signal strength.

U/SIM Status

Your SIM card verification status is shown in this area. Clicking Pin

unlock displays the PIN Verification tab.

Network Name: This shows the name of your network operator.

Network Technology: This shows the network technology you are

Status

currently using.

Home/Roaming: This indicates whether the Router is in Home or

Roaming status.

Internet Connection

Connection Type: This indicates the type of Internet connection you are

using.

Internet IP Address: This is the Router's IP Address, as seen on your

local network.

Subnet Mask and Default Gateway: The Router’s Subnet Mask and

Default Gateway address are displayed here for DHCP and static IP

connections.

DNS1-3: The DNS (Domain Name System) IP addresses currently used

by the Router are shown here.

Router

Status

Firmware Information

Firmware Version: This is the Router’s current firmware.

Modem Version: This is the 3G Module’s current firmware.

APN Version: This is the APN’s current version.

Current Time: This shows the time, as you set on the Optional tab.

Local Network

Local MAC Address: This is the Router’s MAC Address, as seen by your

ISP

Router IP Address: The Router’s IP Address that appears on your local

network.

Subnet Mask: This shows the current subnet mask being configured for

your local network.

DHCP Server: The status of the DHCP server function is displayed here.

Start IP Address: This shows the beginning of the range of IP Addresses

used by devices on your local Ethernet network.

End IP Address: The end of the range of IP Addresses used by devices

on your local Ethernet network is shown here.

DHCP Client Table: Click this button to open a screen showing you

which PCs are utilizing the Router as a DHCP server.

WiFi Network

MAC Address: This is the Router’s MAC Address, as seen on your local

wireless network.

Mode: This displays the wireless mode (Mixed, Wireless-G Only,

Wireless-B Only, or Disabled) used by the network.

Network Name (SSID): This displays the wireless network name or

SSID.

Standard Channel: This displays the channel on which your wireless

network is broadcasting.

Security: This shows the security method you are using.

SSID Broadcast: This shows whether the Router's SSID Broadcast

function is on or off.

Appendix A: FAQ

Q: What should I know and how long does it take when I upgrade the

firmware of router or modem?

A: 1. While upgrade the firmware, it must take some time to do the job.

During that, you ARE NOT ALLOWED to turn off the power or

interrupt the progress.

2. You may use Ethernet cable or Wireless to upgrade the firmware.

It is suggested to use Ethernet cable.

3. It may take 2 minutes to upgrade the firmware of the router and 5

minutes to upgrade the firmware of the modem.

4. When the firmware of the modem is upgrading, the UMTS LED will

flash among Blue-Green-Red. You should wait until the LED is in

single color (about 4~5 minutes).

Q: How to connect to Router?

A: 1. Connect Ethernet cable between PC/NB and Router.

2. Use WiFi to connect.

Q: What’s the default “User name” and “Password” for the Router?

A: User name: admin

Password: hsparouter

Q: How to enter GUI?

A: 1. Connect PC/NB to Router.

2. Open Internet Explorer or other Web browser.

3. Input “http://192.168.1.1” (default) or “http://R300.ROUTER”.

4. Input User name and Password.

Q: How to setup the configuration for the Router?

A: 1. Enter Wizard page to setup.

2. Enter each GUI page to setup.

Q: Why can’t I connect to the network via built-in 3G module?

A: 1. Check the SIM/USIM if it is inserted well.

2. Check the UMTS LED on Router if it is Solid.

3. Check the Status on GUI if the SIM/USIM detected well.

4. Check the Status on GUI if the APN it is correct.

5. Check the Internet on GUI if the Connection is “Keep Alive” or not.

Q: Why the Roaming LED on Router is light?

A: Because the SIM/USIM is in roaming network.

Appendix A: FAQ

If you want to connect to the network while roaming:

1. Ask the operator of SIM to turn on the roaming service allowed to

connect to the network.

2. Set the Internet on GUI with Roaming Connection Enabled.

Q: Why can't I link on the GUI?

A: If you have changed your WiFi security, SSID, Local IP address, you

have to repair your network to get a new IP that you can link the GUI.

XP:

If you are a WiFi user, click Network Connections and right click on

Wireless Network Connection, click Repair.

If you use Local Area Connection to connect the Router, click

Network Connections and right click on Local Area Connection, click

Repair.

Appendix A: FAQ

Vista:

1. If you are a WiFi user, please click Network and Sharing Center >

Manage network connections > Wireless Network Connection >

Diagnose

2. Please click Reset the network adapter “Wireless Network

Connection” and it will began to repair.

Appendix A: FAQ

3. If you use Local Area Connection to connect the Router, please

click Network and Sharing Center > Manage network connections

> Local Area Connection > Diagnose, do the step 1 and following

the message to repair it.

Q: How to setup my WiFi settings from GUI?

A: Entering the GUI first then click WiFi > Basic WiFi Network, you can

setup your basic WiFi settings here.

If you want to set your WiFi Security please click “WiFi Security”.

There are six wireless security mode options supported by the

Router: WEP, WPA Personal, WPA2 Personal, WPA Enterprise,

WPA2 Enterprise, RADIUS.

Q: How can I have a long-time link?

A: Please set the internet > Basic Setting > 3.5G HSPA Setting >

Connection to Keep Alive.

Q: Why can’t I use the Router in the office?

A: Your Router’s IP address might be conflict with the office default

settings.

Q: Why my internet speed is so slow with Router?

A: 1. You can check the GUI Status > Single Quality, the Rx Signal

Strength. If the footstep is too low it means the signal is too weak.

Appendix A: FAQ

2. You can go to the GUI WiFi > Basic WiFi Network, change the

Standard Channel to others then save.

Q: Why can’t I use VPN via Router?

A: You may check your office IP settings, the IP settings must not

conflict with each other.

Q: How do I do the settings when I use xDSL to link the Router?

A: 1. PPPoE: Go to the GUI Internet > Basic Setting > Ethernet Setting.

Change Connection Type to PPPoE Fill information in the blank of

Username and Password which provide by your ISP. Remember

to connect your xDSL or Modem to the WAN Port on your Router.

2. Static IP: Go to the GUI Internet > Basic Setting > Ethernet Setting.

Change Connection Type to Static IP. Fill information in the blank

provide by your ISP. Remember to connect your xDSL or Modem

to the WAN Port on your Router.

Q: Can I prevent others from using my Router?

A: Yes, there are some ways to prevent others from using your

ROUTER.

1. Enable your WiFi client filter.

2. Disabled your SSID Broadcast.

3. Setting your WiFi security.

Appendix A: FAQ

Q: My PIN code is enabled and where can I input the PIN code to use my

Router?

A: Enter GUI > 3.5G HSPA > PIN Verification and input your PIN Code.

Q: Why does my SIM status display “No Device” or “SIM Error”, what can

I do?

A: You can check the SIM card is inserted correctly in your router.

Q: Where can I change the password of Router?

A: Enter GUI > Admin > Management

Q: Can I backup all my settings of Router?

A: Enter GUI > Admin > Recover & Renewal, Select “Backup

Configuration”.

Q: How to use the Reset button on the Router?

A: 1. Short press the Reset can restart the Router.

2. Long press the Reset for more than 5 sec can reset the Router to

factory default.

Q: Where can I reset Router to factory default?

A: 1. Long press the Reset button on the Router for more than 5 sec.

2. Enter GUI > Admin > Recover & Renewal, Select “Restore Factory

Defaults”.

Appendix A: FAQ

Q: If I remove the SIM when 3G is connected, why can’t I see the SIM

status change?

A: You have to restart the router to see the status.

Appendix B: Specification

Form Factor

Weight (g) 170g

Interface

LAN port RJ45, 1 port

WAN port RJ45, 1 port, can be configured to be 2nd LAN port

Power supply plug Yes

Reset button Yes

SIM slot Yes, Push-push type

Connectivity and Data Speed

UMTS Band By built-in module

HSPA/WCDMA Data

Rate

Uplink up to 5.7 Mbps

Downlink up to R300 Series: 21/ 28.8 Mbps

R200 Series: 7.2 Mbps

WCDMA power class Power Class 3

WLAN 802.11b/g with Pre-n 2.4 GHz band

LAN Ethernet 10/100 Mbps

Antenna

GSM/WCDMA Main

Antenna Embedded

WCDMA RX Diversity

Antenna Embedded

3G External Antenna

Port Yes

WiFi Antenna Embedded

Appendix B: Specification

Protocol

Default connection "3.5G HSPA First" or "Ethernet First" customizable

Automatic WAN

connection fail-over Supported

WME Traffic

Prioritization / Traffic

Shaping Supported

Fixed WAN

connection DHCP, Static IP, PPPoE, PPTP, L2TP

UMTS/HSPA

connection Connection On Demand, Keep Alive, Auto APN matching

with USIM

Security Multiple VPN passthrough (IPsec, PPTP, L2TP), Internet

access restriction, Firewall, DoS Prevention, Traffic and

Event Logging

NAT-NAPT Port forwarding, Port triggering, DMZ,Multicast

Pass-Through, Static Routing, Dynamic Routing (RIP 1,

RIP2), QoS

DNS DNS Agent, DDNS

ALG Support Yahoo messenger, AOL messenger, MSN messenger, ICQ,

RealAudio, NetMeeting, Telnet, FTP, Microsoft Traceroute,

Quake, IRC, Microsoft PPTP Client

Browser-based Admin

GUI Setup Wizard in GUI.

Browser supported: IE, Firefox, Safari

Browser-based Admin

GUI Multi-Language

Supported English, Traditional Chinese,

Other Features IPv4, TCP, UDP, ICMPv4, ARP, DHCP Server/Client,

HTTPs, NTP, TFTP server, MAC Clone

Wireless LAN

802.11b data rate 1/2/5.5/11 Mbps, Auto or Fixed Rate

802.11g data rate 6/9/12/18/24/36/48/54 Mbps, Auto or Fixed Rate

802.11n data rate 65Mbps/135Mbps (No MIMO)

Security

WPA2/WPA/AES/TKIP, WPA/WPA2 PSK mode, 802.1x

(identify all EAP types supported), 64/128 bits WEP

Encryption, MAC address filtering, open system and shared

key authentication, SSID Broadcast Disable

Other Features Support up to 32 simultaneous wireless users, WME

Status Indication

Appendix B: Specification

LED

LED location from top to bottom:

UMTS, Roaming, WLAN, Ethernet, DIAG and Power.

UMTS, Roaming, WLAN, Ethernet, DIAG LED will be

multiplexed for signal strength when 3G button short

pushed

Accessories

Power adaptor Supported, Input 100~240V AC, 50~60GHz

Output 12V DC, 1A (targeted)

Power Consumption

Voltage 12V DC

Data mode 4.0V Peak: 2.5A, Average: 1A / 1.5V average: 0.5A

Environment

Operation

Temperature 0°C to 40°C (32°F to 104°F)

Storage Temperature -20°C to 60°C (-4°F to 140°F)

Operating Humidity 10% to 80% Non-Condensing

Storage Humidity 5% to 90% Non-Condensing

Conformance

FCC

RoHS

Appendix C: Important Safety Information and Glossary

Appendix C: Important Safety

Information and Glossary

Europe – EU Declaration of Conformity

European Union Notice

Products with CE marking comply with the R&TTE Directive (99/5/EC), the EMC

Directive (2004/108/EC), and the Low Voltage Directive (2006/95/EC) issued by the

Commission of the European Community.

Compliance with these directives implies conformity to the following European

Norms (in parentheses are the equivalent international standards).

EN 60950-1 (IEC 60950-1)

Safety of Information Technology Equipment.

EN 300 328

Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband

Transmission systems; data transmission equipment operating in the 2.4 GHz

ISM band and using spread spectrum modulation techniques.

EN 301 489-24

Electromagnetic compatibility and Radio spectrum Matters (ERM);

Electromagnetic Compatibility (EMC) standard for radio equipment and services;

Part 24: Specific conditions for IMT-2000 CDMA direct spread (UTRA) for mobile and

portable (UE) radio and ancillary equipment.

ETSI EN 301 511

Global system for mobile communications (GSM); Harmonised EN for mobile stations

in the GSM 900 and GSM 1800 bands, covering essential requirements of article 3.2

of the R&TTE directive (1995/5/EC).

ETSI EN 301 489-1

Electromagnetic compatibility and Radio spectrum Matters (ERM);

Electromagnetic Compatibility (EMC) standard for radio equipment and

services; Part 1: Common technical requirements.

ETSI EN 301 489-7

Electromagnetic compatibility and Radio spectrum Matters (ERM);

Electromagnetic Compatibility (EMC) standard for radio equipment and services;

Part 7: Specific conditions for mobile and portable radio and ancillary equipment of

digital cellular radio telecommunications systems (GSM and DCS).

Appendix C: Important Safety Information and Glossary

ETSI EN 301 489-17

Electromagnetic compatibility and Radio spectrum Matters (ERM);

Electromagnetic Compatibility (EMC) standard for radio equipment and services;

Part 17: Specific conditions for 2.4 GHz wideband transmission systems.

ETSI EN 301 908-1 & -2

Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS),

Repeaters and User Equipment (UE) for IMT-2000 Third Generation cellular networks;

Part 1: Harmonised EN for IMT-2000, introduction and common requirements,

covering essential requirements of article 3.2 of the R&TTE Directive.

EN 50385

Product standard to demonstrate the compliance of radio base stations and fixed

terminal stations for wireless telecommunication systems with the basic restrictions or

the reference levels related to human exposure to radio frequency electromagnetic

fields (110 MHz - 40 GHz) - General public.

Federal Communication Commission

Interference Statement

15.21

You are cautioned that changes or modifications not expressly approved by the part

responsible for compliance could void the user’s authority to operate the equipment.

15.105(b)

Federal Communications Commission (FCC) Statement

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Appendix C: Important Safety Information and Glossary

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1) This device may not cause harmful interference and

2) This device must accept any interference received, including interference that may

cause undesired operation of the device.

FCC RF Radiation Exposure Statement:

1. This Transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter.

2. This equipment complies with FCC RF radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated with a

minimum distance of 20 centimeters between the radiator and your body.

Appendix C: Important Safety Information and Glossary

Glossary

2G: Second-generation mobile networking technology. Represents a switchover from

analog to digital; most 2G networks use GSM.

3G: Third-generation mobile networking technology that enables simultaneous

transfer of voice and non-voice data; most 3G networks use WCDMA.

3.5G: A more recent standard of mobile networking technology; generally uses

HSDPA.

3.75G: A more recent standard of mobile networking technology; generally uses

HSUPA.

APN (Access Point Name/Network): Provides GPRS routing information. Consists

of:

Network ID: Identiﬁes the external service requested by a GPRS user.

Mobile network operator ID: Speciﬁes routing information.

ARFCN (Absolute Radio Frequency Channel Number): The speciﬁc ID numbers

for all radio channels used in cellular mobile communications.

bps (bits per second): How data ﬂow is measured.

CHAP (Challenge Handshake Authentication Protocol): CHAP identifiers are

changed frequently and authentication can be requested by the server at any

time.

DNS (Domain Name System): Helps route network trafﬁc by making the addressing

process more user-friendly.

DHCP (Dynamic Host Conﬁguration Protocol): How devices obtain IP addresses

from a server.

DUN (Dial-Up Network): Windows component that enables online access via a

modem.

EDGE (Enhanced Data GSM Environment/Enhanced Data for Global Evolution):

Advanced GPRS that delivers multimedia and other data needing greater

bandwidth at up to 237 kbps.

GPRS (General Packet Radio Service): Delivers data in packets at up to 86 kbps.

GSM (Global System for Mobile Communications): The most popular cellular

network, mostly operates in 850-900 or 1800-1900 MHz; the primary 2G system.

HSDPA (High Speed Downlink Packet Access): Advanced WCDMA that delivers

downlink bandwidth intensive data at up to 7.2Mbps; typically associated with

3.5G.

HSUPA (High Speed Uplink Packet Access): Advanced WCDMA that delivers

uplink bandwidth intensive data at up to 5.76Mbps; typically associated with

3.75G.

HSPA+ (High Speed Packet Access +): This is also known as HSPA Evolved, is the

next step and is more focused on delivering data services enabling speeds of up

Appendix C: Important Safety Information and Glossary

to 42Mbps in the downlink and 11Mbps in the uplink.

IMEI (International Mobile Equipment Identity): A number unique to each

GSM/UMTS device that can be used block network access by a stolen mobile

device.

IP (Internet Protocol): Routes packets over a network.

Kbps (Kilobits per second): A data ﬂow measure; 1024 bits/second.

LAN (Local Area Network): A data network with limited range but good bandwidth.

Mbps (Megabits per second): A data ﬂow measure; 1,048,576 bits/second.

PAP (Password Authentication Protocol): The difference between PAP

authentication and a manual or scripted login, is that PAP is not interactive. The

username and password are entered in the client's dialing software and sent as

one data package as soon as the modems have established a connection, rather

than the server sending a login prompt and waiting for a response.

PPP (Point-to-Point Protocol): An internet connection method.

PIN (Personal Identity Number): Four to eight digital numbers SIM card security

code; allows access to the carrier’s network.

Rx: Shorthand for Reception.

SIM (Subscriber Identity Module): A small card that contains key mobile device

identiﬁcation, subscription and contact information.

Tx: Shorthand for Transmission.

WCDMA (Wideband Code Division Multiple Access): Advanced EDGE that

supports 384kbps data ﬂow. Most 3G networks use this standard, the same as

UMTS.

User manual UZI R250 rev01

User

Manual

BandLuxe

R300 Series

HSPA+ WLAN Router

R200 Series

HSPA WLAN Router