Benq I500 Digital projector User Manual 0706

Download:
Mirror Download [FCC.gov]
Document ID	3053670
Application ID	TEEJ5wQ/tkn3f8zAzEeKfA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	119.3kB (1491233 bits)
Date Submitted	2016-07-07 00:00:00
Date Available	2017-01-04 00:00:00
Creation Date	2016-07-06 14:59:09
Producing Software	GPL Ghostscript 9.10
Document Lastmod	2016-07-06 14:59:09
Document Title	User manual_0706
Document Creator	PDFCreator Version 1.7.3
Document Author:	amqian

Projector
CONTENT
1 Safety Precautions .................................................. 4
1-1 Setting Up the Device ........................... 4
1-2 Repairs ................................................... 6
Brand: BENQ
1-3 Power Supply......................................... 6
2 Know Your Device ................................................... 7
Model: i500
2-1 Projector ................................................. 7
2-2 IR Remote Control ................................ 8
3 Operating Instructions .......................................... 10
4 Device Connection and Settings .......................... 12
4-1 Input sources & online content .......... 12
4-2 Controller choices ............................... 12
4-3 Setup wizar .......................................... 13
4-4 Controller operation ............................ 14
User Manual
4-5 Controller operations in Launcher .... 15
4-6 Online content ..................................... 16
1 Safety Precautions
Do not make any changes or settings that are not described in this
4-7 Computer.............................................. 17
user manual. Physical injury or damage to the device or loss of
data can result from improper handling. Take note of all warning
4-8 HDMI ..................................................... 18
and safety notes indicated.
4-9 USB reader .......................................... 20
1-1 Setting Up the Device
4-10 Bluetooth speaker ............................. 20
a)
The device is exclusively for indoor use.
b)
The device should be placed securely on a stable, flat
5 Technical Specifications ....................................... 21
surface. Position all cables in such a way that no one will
6 Supported File Formats......................................... 22
stumble on them. To avoid possible injuries to persons of
damage to the device itself.
Federal Communication Commission Interference
c)
Statement .................................................................. 23
Industry Canada statement ...................................... 25
Do not plug in the device in moist rooms. Never touch the
mains cable of the mains connection with wet hands.
d)
The device must have sufficient ventilation and may not be
covered. Do not put your device in closed cabinets or
NCC Warnings .......................................................... 27
boxes.
e)
Do not place the machine on soft surfaces such as
tablecloths or carpets and do not cover the ventilation slits.
Otherwise the device could overheat or catch fire.
f)
Protect the device against direct sunlight, heat, large
temperature fluctuations and moisture. Do not place the
device in the vicinity of heaters or air conditioners. Observe
the information on temperature and humidity in the
technical data.
g)
When the device is running for a long period of time, the
2. Wait one to two hours before you take the device out of
surface becomes hot and a warning symbol appears on the
the plastic bag.
projection. The device switches automatically to standby
h)
m)
The device should not be used in a very dusty environment.
mode when it gets too hot. After the device has cooled
Dust particles and other foreign objects may damage the
down, you can continue playback by pressing any key.
unit.
Do not allow liquids to enter into the device. Switch off the
n)
device and disconnect it from the mains supply if liquids or
foreign substances end up inside the device. Have the unit
Do not expose the device to extreme vibrations. It may
damage the internal components.
o)
Do not allow children to handle the device without
inspected by a technical service department.
supervision. The packing materials should be kept out of
i)
Always handle the unit with care. Avoid touching the lens.
children.
j)
Never place heavy or sharp objects on the projector or the
k)
l)
power cable.
1-2 Repairs
If the projector gets too hot or emits smoke, shut it down
Do not make any repairs to the device yourself. Improper
immediately and unplug the power cable. Have your device
maintenance can result in injuries or damage to the device. Only
examined by trained professionals at a technical service
have your device repaired by an authorized service center.
location. To prevent the spread of fire, open flames should
Do not remove the type label from your device; this would void the
be kept away from the device.
warranty.
Under the following conditions, a layer of moisture can
appear inside the device which can lead to malfunctions:
1-3 Power Supply
※ if the device is moved from a cold to a warm area;
Use only the enclosed power adapter. Check whether the mains
※ after a cold room is heated;
voltage of the power supply matches the mains voltage available at
※ when this device is placed in a damp room.
the setup location. This equipment complies with the voltage type
Proceed as follows to avoid any moisture build-up:
specified on the unit.
1. Seal this device in a plastic bag before moving it to
another room, in order for it to adapt to room conditions.
2 Know Your Device
2-2 IR Remote Control
2-1 Projector
Key Name
Detailed Description
Power Button
Press to turn on/off the projector.
Source
It shows available source options.
Blank
To turn projector into/out of blank mode.
Menu
This button will turn on/off OSD menu.
Mute
Mutes the built-in speaker.
Volume Down
Press this button to turn down the volume.
Volume Up
Press this button to turn up the volume.
Navigation Buttons
Up/Down/Left/Right
OK
To confirm, to enter.
Back
Exist/Return to previous menu.
Home
Tap to enter Home screen.
List
Item list
3 Operating Instructions
☆Caution:
1. Improper use may cause the battery to overheat, explode or
ignite and cause injury or fire. Battery leakage may damage the
remote control.
2. Do not allow direct sunlight into the remote control.
3. Do not recharge, disassemble, heat, or deform the battery.
4. Do not allow the battery to catch fire or hit the water.
5. Replace dead batteries immediately.
6. Please remove the battery, if you don’t use the remote control for
a long time.
10
4 Device Connection and Settings
4-1 Input sources & online content
4-2 Controller choices
11
12
4-3 Setup wizar
4-4 Controller operation
13
14
4-5 Controller operations in Launcher
15
4-6 Online content
16
4-7 Computer
4-8 HDMI
17
18
4-9 USB reader
4-10 Bluetooth speaker
19
20
5 Technical Specifications
Projection
6 Supported File Formats
DLP
System
Native
WXGA(1280*800)
Resolution
Brightness
500AL
Lens
F=1.6, f=6.154mm
Throw Ratio
0.6:1 (77”@1m)
Interface
Computer in (D-Sub 15pin)
*1
HDMI
*1
LAN RJ45
SoC
Mstar628 ARM A7 Qual-core CPU
RAM
1GB DDR3
Flash
8GB EMMC
OS
Android OS 4.4
WLAN
802.11 b/g/n, 2T2R, Dual Band 2.4G/5G
Video
AVI (XVID, MJPEG), DVIX (MJPEG, XVID), DAT
(MPEGI), MPG (MPEGI), MPEG (MPEGI)
Music
MP3, MP2, MP1, OGG, AAC, WAV
Photo
JPG (.jpg, .jpeg), BMP (.bmp)
*1
Subtitle
SRT (.srt), SMI (.smi). Only support UTF (unicode).
Audio in (Mini Jack)
*1 (3.5mm)
Document
Adobe PDF (pdf), MS PowerPoint 97-2010, Office
Audio out (Mini Jack)
*1 (3.5mm)
XP (ppt, pptx), MS Excel 97-2010, Office XP (xls,
MIC in
*1 (3.5mm)
xlsx), MS Word 97-2010, Office XP (doc, docx)
Speaker
5W *2
WLAN (2T2R)
*1
Bluetooth 4.0
*1
IR Receiver
*2 (Front and Back)
USB (Type A)
*2 (one for 1.5A power supply,
one for USB reader)
Weight
1.3kg (2.87 pounds)
Power
Power Supply
AC 100 to 240V, 50/60Hz
Power Consumption
75W (typical), Standby < 0.5W
21
22
Federal Communication Commission
Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is
Consult the dealer or an experienced radio/TV technician
for help.
FCC Caution:
subject to the following two conditions: (1) This device may not
Any changes or modifications not expressly approved by
cause harmful interference, and (2) this device must accept any
the party responsible for compliance could void the user's
interference received, including interference that may cause
authority to operate this equipment.
undesired operation.
This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Operations in the 5.15-5.25GHz band are restricted to
indoor usage only.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
Note: The country code selection is for non-US model only and is
installed and used in accordance with the instructions, may cause
not available to all US model. Per FCC regulation, all WiFi product
harmful interference to radio communications. However, there is no
marketed in US must fixed to US operation channels only.
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
Radiation Exposure Statement:
equipment off and on, the user is encouraged to try to correct the
This equipment complies with FCC radiation exposure limits set
interference by one of the following measures:
forth for an uncontrolled environment. This equipment should be
Reorient or relocate the receiving antenna.
installed and operated with minimum distance 20cm between the
Increase the separation between the equipment and
radiator & your body.
receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
23
24
Industry Canada statement
Cet appareil est conforme à la norme RSS-310 d'Industrie
Canada. L'opération est soumise à la condition que cet
This device complies with Industry Canada license-exempt
appareil ne provoque aucune interférence nuisible.
RSS standard(s). Operation is subject to the following two
conditions:
This device and its antenna(s) must not be co-located or
1)
this device may not cause interference, and
operating in conjunction with any other antenna or transmitter,
2)
this device must accept any interference, including
except tested built-in radios.
interference that may cause undesired operation
of the device.
Cet appareil et son antenne ne doivent pas être situés ou
fonctionner en conjonction avec une autre antenne ou un
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de
autre émetteur, exception faites des radios intégrées qui ont
été testées.
licence. L'exploitation est autorisée aux deux conditions
suivantes:
The County Code Selection feature is disabled for products
1)
l'appareil ne doit pas produire de brouillage, et
2)
l'utilisateur de l'appareil doit accepter tout brouillage
marketed in the US/ Canada.
La fonction de sélection de l'indicatif du pays est désactivée
radioélectrique subi, même si le brouillage est
pour les produits commercialisés aux États-Unis et au
susceptible d'en compromettre le fonctionnement.
Canada.
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
This device complies with RSS-310 of Industry Canada.
Operation is subject to the condition that this device does
not cause harmful interference.
25
26
NCC Warnings
Type-certified low-power radio frequency electrical machine,
without permission, companies, firms or users are not allowed to
alter the frequency, increase the power or change the features and
functionality of the original design.
The using of low-power radio frequency electrical machine shall not
affect the flight safety and interfere the legal communications; once
interference is discovered, should immediately stop the using until
improved to no interference.
The above-mentioned legal communications refers to the wireless
communication operated according to Telecommunications Act.
Low-power radio frequency electrical machine should bear the
interference from legal communications or industrial, scientific and
medical radio waves radiant electric equipment.
27

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Modify, Annotate, Fill forms, Extract, Assemble, Print high-res
Page Count                      : 14
Warning                         : XMP format error (no closing tag for �wl��)
Producer                        : GPL Ghostscript 9.10
Create Date                     : 2016:07:06 14:59:09+08:00
Modify Date                     : 2016:07:06 14:59:09+08:00
Author                          : amqian
Creator                         : PDFCreator Version 1.7.3
Subject                         : 
Title                           : User manual_0706

EXIF Metadata provided by EXIF.tools