Benq S680C Tri-Band Mobile Phone User Manual S660C TC EN
Benq Corporation Tri-Band Mobile Phone S660C TC EN
Benq >
Contents
- 1. Manual 1 rev
- 2. Manual 2
Manual 1 rev
Copyright © 2004. BENQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BENQ Corporation. * This publication includes images from CorelDRAW® 9 which are protected by the copyright laws of the U.S., Canada and elsewhere. Used under license. Disclaimer BENQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, BENQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of BENQ Corporation to notify any person of such revision or changes. Safety Information For your safety, please read the guidelines below carefully before you use your phone: Exposure to Radio Frequency Signals Max. SAR measurement EU: GSM900: 0.795 mW/g; DCS1800: 0.504 mW/g. USA: PCS1900: 0.557 mW/g. Your wireless handheld portable telephone is a low power transmitter and receiver. When it is ON, it receives and also sends out radio frequency (RF) signals. European and international agencies have set standards and recommendations for the protection of public exposure to RF electromagnetic energy. • International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1996 • Verband Deutscher Elektringenieure (VDE) DIN- 0848 • Directives of the European Community, Directorate General V in Matters of Radio Frequency Electromagnetic Energy • National Radiological Protection Board of the United Kingdom, GS 11, 1988 • American National Standards Institute (ANSI) IEEE. C95.1- 1992 • National Council on Radiation Protection and Measurements (NCRP). Report 86 • Department of Health and Welfare Canada. Safety Code 6 These standards are based on extensive scientific review. For example, over 120 scientists, engineers and physicians from universities, government health agencies and industry reviewed the available body of research to develop the updated ANSI Standard. The design of your phone complies with these standards when used normally. Safety Information Specific Operating Restrictions No metallic component allowed in body-worn accessories. Antenna Care Use only the supplied or approved replacement antenna. Unauthorized antennas, modifications or attachments may damage the phone and violate FCC regulations. Phone Operation Normal Position: Hold the phone as you would any other telephone with the antenna pointed up and over your shoulder. For your phone to operate most efficiently, do not touch the antenna unnecessarily when the phone is in use. Contact with the antenna affects call quality and may cause the phone to operate at higher power level than otherwise needed. Batteries All batteries can cause property damage, injury or burns if a conductive material such as jewelry, keys or beaded chains touches exposed terminals. The material may complete electrical circuit and become quite hot. To protect against such unwanted current drain, exercise care in handling any charged battery, particularly when placing it inside your pocket, purse or other container with metal objects. When battery is detached from the phone, your batteries are packed with a protective battery cover; please use this cover for storing your batteries when not in use. Driving Check the laws and regulations on the use of wireless telephones in the areas where you drive. Always obey them. Also, if using your phone while driving, please: • Give full attention to driving--driving safety is your first responsibility. • Use hands-free operation, if available. ii Safety Information • Pull off the road and park before making or answering a call if driving conditions so require. Electronic Devices Most modern electronic equipment is shielded from RF signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone. Pacemakers The Health Industry Manufacturers Association recommends that a minimum separation of six (6") inches be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers: • Should ALWAYS keep the phone more than six inches from their pacemaker when the phone is turned ON. • Should not carry the phone in a breast pocket. • Should use the ear opposite the pacemaker to minimize the potential for interference. If you have any reason to suspect that the interference is taking place, turn your phone OFF immediately. Hearing Aids Some digital wireless phones may interfere with some hearing aids. In the event of such interference you may want to consult your hearing aid manufacturer to discuss alternatives. Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if they are adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Safety Information iii Turn your phone OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. Posted Facilities Turn your phone OFF in any facility where posted notice so requires. Aircraft FCC regulations prohibit using your phone while in the air. Switch OFF your phone before boarding an aircraft. Blasting Areas To avoid interfering with blasting operations, turn your phone OFF when in a “blasting area” or in area posted “TURN OFF TWO-WAY RADIO.” Obey all signs and instructions. Potentially Explosive Atmospheres Turn your phone OFF and do not remove the battery when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks, from your battery, in such areas could cause an explosion or fire resulting in bodily injury or even death. Areas with a potentially explosive atmosphere are often, but not always clearly marked. They include fueling areas such as gasoline stations; below deck on boats; fuel or chemical transfer or storage facilities; vehicles using liquefied petroleum gas (such as propane or butane); areas where the air contains chemicals or particles, such as grain, dust, or metal powders; and any other area where you would normally be advised to turn off your vehicle engine. iv Safety Information For Vehicles Equipped with an Air Bag An air bag inflates with great force. DO NOT place objects, including both installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. this device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. European Union Directives Conformance Statement This device complies with the OJ-Directive as below: Electromagnetic Compatibility Directive (89/336/EEC), Low Voltage Directive (73/23/EEC) And R&TTE Directive (99/05/EEC). And also complies with the standard: 3GPP TS 51.010-1 EN 301 511 EN 30360/ EN30361 ETSI EN 301 489-1/-7 EN 60950 Safety Information IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 1.5 cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. vi Safety Information Table of Contents Safety Information ...........................................................i 1. Preparing Your Phone For Use................................... 1 Inserting a SIM Card ............................................................ 1 Installing a Battery and Charging the Phone ...................... 2 Turning the Phone On ......................................................... 5 2. Getting to Know Your Phone ..................................... 7 Your Phone at a Glance........................................................ 7 Active Flip Feature.............................................................. 10 Status Indicator Light......................................................... 10 Standby Screen.................................................................... 11 External Display .....................................................................11 Icons in the External Display's Status Bar.............................12 Main Screen ............................................................................14 Icons in the Main Display's Status Bar..................................16 Using the Keys in the Standby Mode ....................................18 Menu Navigation................................................................ 23 Main menu map .....................................................................30 3. Using Your Phone ..................................................... 33 Making a Phone Call .......................................................... 33 Ending a Phone Call ........................................................... 33 Answering a Phone Call ..................................................... 34 Rejecting an Incoming Call................................................ 35 Turning Off the Ring Tone for an Incoming Call .......................................................... 35 Table of Contents vii Making an International Call............................................. 35 Making an Emergency Call ................................................ 36 Dialing an Extension Number ........................................... 36 Speed Dialing ...................................................................... 36 Voice Dialing ...................................................................... 36 Listening to Voicemails ...................................................... 37 Phone Book......................................................................... 38 Adding Contacts to the Phone Book.....................................38 Finding Contacts in the Phone Book ....................................43 Last Missed, Dialed, and Received Calls............................ 45 Operations During a Call ................................................... 47 Call Menu ........................................................................... 49 Using the Silent Profile....................................................... 51 Camera Function................................................................ 52 Shortcuts Menu .................................................................. 57 Setting Function Shortcuts ....................................................57 Setting Phone Number Shortcuts..........................................59 Using Function and Phone Number Shortcuts ....................60 Messages Menu................................................................... 61 Create ......................................................................................63 Short Message.............................................................................. 63 MMS ............................................................................................ 66 SIM Folder ..............................................................................71 Inbox .......................................................................................72 Template .................................................................................77 SMS Template ............................................................................. 77 MMS Template ........................................................................... 77 viii Table of Contents Outbox ....................................................................................77 Drafts.......................................................................................78 Voicemail ................................................................................79 Message Settings .....................................................................79 Cleanup Messages...................................................................84 Memory Status .......................................................................84 Voice Memo........................................................................ 85 Input Modes ....................................................................... 86 Changing the Text Input Mode.............................................86 Letter Input Mode (ABC) ......................................................87 Numeric Input Mode (123)...................................................87 Predictive Input Mode (iTap) ...............................................87 Symbol Input Mode ...............................................................89 Direct Connection to URLs ............................................... 90 4. Menus ......................................................................... 92 Phone Book......................................................................... 92 Find .........................................................................................92 Add..........................................................................................92 Edit ..........................................................................................92 Copy ........................................................................................93 Delete ......................................................................................93 Caller Groups..........................................................................93 Privacy Manager.....................................................................94 Business Card .........................................................................96 Activate ...................................................................................97 My Number ............................................................................97 SIM Status...............................................................................97 Table of Contents ix Call Records ........................................................................ 98 Missed Calls ............................................................................98 Received Calls .........................................................................98 Dialed Calls.............................................................................98 Delete All.................................................................................98 Call Duration..........................................................................99 Call Cost................................................................................100 Messages............................................................................ 101 Organizer .......................................................................... 102 Calendar................................................................................102 To Do List .............................................................................104 Note.......................................................................................105 Tools.................................................................................. 105 Camera..................................................................................105 Alarm Clock..........................................................................106 Shortcuts ...............................................................................107 Voice Memo .........................................................................107 Calculator..............................................................................108 Currency Converter .............................................................108 Stopwatch .............................................................................110 Countdown Timer ...............................................................110 Memory Status .....................................................................111 Service Number ....................................................................111 SIM Toolkit Menu................................................................111 Games................................................................................ 112 Champion Soccer .................................................................112 Dragon Fight.........................................................................117 Table of Contents Internet.............................................................................. 118 WAP Service .........................................................................118 Start Browser ............................................................................. 119 WAP Message............................................................................ 125 Enter Address ............................................................................ 125 Resume ...................................................................................... 125 Clear Cache ............................................................................... 125 WAP Settings............................................................................. 125 JAVA .....................................................................................129 Multimedia ....................................................................... 133 Picture ...................................................................................133 Animation.............................................................................134 Melody ..................................................................................134 My Melodies.............................................................................. 134 Composer .................................................................................. 136 Help ........................................................................................... 139 Album ...................................................................................139 Settings .............................................................................. 144 Date & Time .........................................................................144 Time........................................................................................... 144 Format ....................................................................................... 144 Secondary Time........................................................................ 145 Power On/Off .......................................................................145 Profiles ..................................................................................146 Display ..................................................................................150 Theme........................................................................................ 150 Wallpaper .................................................................................. 150 Welcome Message ..................................................................... 151 Contrast ..................................................................................... 152 Brightness .................................................................................. 152 Table of Contents xi Backlight Setting ....................................................................... 152 OLED Duration......................................................................... 152 OLED Animation Setting ......................................................... 153 Audio.....................................................................................153 Power Saving Mode..............................................................153 Call Settings ..........................................................................154 Call Divert ................................................................................. 154 Call Barring ............................................................................... 155 Call Waiting............................................................................... 156 Auto Redial................................................................................ 156 Show Number ........................................................................... 156 Fixed Dial Number ................................................................... 157 Active Line................................................................................. 157 Connect Alert ............................................................................ 157 Minute Beep .............................................................................. 158 Network ................................................................................158 Mode Selection.......................................................................... 158 Available List ............................................................................. 158 Band Setting .............................................................................. 159 Connection Mode ..................................................................... 159 Security .................................................................................159 PIN Code ................................................................................... 159 Phone Lock................................................................................ 160 SIM Lock ................................................................................... 161 Screen Lock ............................................................................... 161 Language ...............................................................................162 Input Mode...........................................................................162 Flip Activate..........................................................................162 User Group ...........................................................................163 Restore ..................................................................................163 xii Table of Contents 5. Care and Maintenance ............................................ 164 6. Troubleshooting...................................................... 165 Table of Contents xiii xiv Table of Contents Preparing Your Phone For Use Inserting a SIM Card 1. Turn the phone over, and release the battery latch. Lift the battery off the phone. Battery latch Do not remove the battery when the phone is on. Doing so could cause you to lose personal settings or data stored either on your SIM card or in the phone's memory. 2. Slide the SIM card in under the metal plate in the SIM card slot, with the SIM card's metal contacts facing down and the cut corner at the top right. Metal plate SIM card A SIM card can be easily damaged if its metal contacts become scratched. Therefore, take special care when holding or inserting it. Preparing Your Phone For Use you wish to remove the SIM card, you / Ifmust first press down the stay, then push the SIM card out of the slot. Stay SIM card Installing a Battery and Charging the Phone 1. With the battery's metal contacts facing down, align the protruding tabs on the end with the holes in the battery bay of the phone. Then push the battery toward the end of the bay to insert the battery's tabs into the holes. Press down to click the battery in place. Preparing Your Phone For Use 2. Insert the charger connector into the charger socket on the bottom of the phone. Make sure that the connector is inserted in the correct orientation (with the arrow pointing up). Charger socket Charger connector 3. Insert the charger into a power outlet. 4. Once the phone is fully charged, remove the charger from both the power outlet and the phone. Preparing Your Phone For Use requires approximately 4 hours. / •• Charging When charging the phone while it is turned off, the external and main displays will be activated, and the status indicator light will flash blue (during the charging process, the external display will show the time and cycle through 3 animations, then turn off temporarily. This is normal. • During charging, in the external display's battery indicator the lines showing the battery power level will scroll until the battery is fully charged. • When charging while the phone is turned off, the main display shows the animation. If the charging is performed while the phone is on, the main display shows the icon. The lines showing the battery power level will scroll until the battery is fully charged. • After the battery is fully charged, the status indicator light will flash purple. • When the battery is out of power, the phone will play an alert sound to remind you to recharge it and then will automatically turn off. Do not remove the battery while the phone is charging. Preparing Your Phone For Use Turning the Phone On 1. Open the phone's flip. 2. Press and hold to turn the phone on. The phone will display the welcome animation. can select and set a welcome animation, image, or message / • You that will display when you turn on your phone, as well as the music that will be played. Go to the menu: Settings → Display → Welcome Message. For details, please refer to page 151. • If the welcoming music goes on too long, once the standby screen comes up, you can press to stop playback. 3. Enter your PIN1 number. If you enter the PIN1 number incorrectly, press (Clear) to delete the incorrect numerals. Press and hold to delete all numerals that have been entered. After completing entry of your PIN1 number, press to confirm. 8 The PIN (Personal Identification Number) is a password provided by a network operator with a SIM card. You need this password in order to use the SIM card. If you enter the PIN incorrectly 3 times in a row, the SIM card will lock down and no longer be usable. If this happens, you must enter the PUK (Personal Unblocking Key) for that SIM card in order to unlock it. Please contact your network operator to obtain a PUK. To cancel PIN password authentication, go to the menu Settings → / Security → PIN Code → PIN1 Code. Please see page 159. Preparing Your Phone For Use 4. When the PIN code entered has been accepted, the phone will automatically search for the designated network. This search process may take a few seconds. 5. The phone will then ask you whether you wish to activate the phone book stored in the phone's memory or on your SIM card. Press to highlight the desired phone book and then press to open the phone book you have selected. 6. After you open the phone book on the SIM card, any data you browse, store, or delete will be from the SIM card's phone book. If you open the phone book in the phone's memory, any data that you view, store, or delete will be from the phone's phone book. at some later point, you wish to switch phone books, go to the / Iffollowing menu Phone Book → Activate. 7. The standby screen will be displayed, as well as network signal strength and the name of the network operator. You can now use the phone. 8 If the phone cannot detect the network, the on-screen signal strength meter will show no bars. 8 If the phone links to a network that you are not authorized to use, the signal strength meter will show a level of zero. You will only be able to make emergency calls. Preparing Your Phone For Use Getting to Know Your Phone Your Phone at a Glance The figure below shows the main parts of your phone: Front view 1 Antenna Status indicator light External display External speaker Getting to Know Your Phone Front view 2 Earpiece Main display OK key Left soft key Dial/Answer key Scroll key Right soft key Power on/off key Messages menu key Alphanumeric keys Microphone Getting to Know Your Phone Side and back views Hands-free headset/Data cable jack Volume key Lanyard hole Mirror used to take self photos Camera lens To avoid potential RF interference, and please keep the minimum distance with 15mm. Getting to Know Your Phone Active Flip Feature Opening the flip allows you to answer an incoming call. Closing the flip ends a call, cancels dialing, or rejects an incoming call. can turn the active flip feature on or off. To do so, go to the menu: / You Settings → Flip Activate. Status Indicator Light The status indicator light has the following functions: • Flashes blue when the phone detects a network or is charging. • Flashes purple when the battery is fully charged. • Flashes blue rapidly when there is an incoming call. 8 To turn off the status indicator light, you must start up the power saving mode. Go to this menu: Settings → Power Saving Mode. 10 Getting to Know Your Phone Standby Screen External Display When the flip is closed, the external display's status bar will show icons for network signal strength, battery power, and alarm (if active). The current time and an animation will appear in sequence. The external display can also alert you to incoming calls, text messages, and missed calls. you wish to set the time shown on the external display, go to the / • Ifmenu Settings → Date & Time → Time. See page 144. • In the default setting, the external display will show the time and several animations in sequence for one cycle. The external display will then temporarily power off. After it has powered off, you can turn it back on by pressing either the up or down arrow on the volume key located on the left side of the phone. • You can set the external display's cycling mode by using the menu Settings → Display → OLED Duration. See page 152. • You can choose the animations to be shown on the external display by using the menu: Settings → Display → OLED Animation Setting. See page 153. • You can go to the menu Settings → Profiles → Personal to change the name of the profile to your own user name. When this profile is activated and the phone's flip is opened, your own name will appear on the external display. For details, see page 147. Getting to Know Your Phone 11 Icons in the External Display's Status Bar Icon Function Description Signal strength Signal strength of the network. The more bars indicated, the stronger the signal. Battery status Shows the current level of battery power. The more bars indicated, the more power that remains. Four bars: fully charged. No bars: immediate charging needed. When charging the phone, the icon will scroll through the bars until the battery is fully charged. Shows that a text message is being received or that there are unread text messages. If Text message the icon flashes, this indicates that the SIM card's text message memory is full. For information about the text message function, see page 61, "Messages Menu". Voicemail Indicates that there are voicemails (this icon will only appear if the function is supported by your network vendor). Alarm The alarm is turned on. To set the alarm, go to the menu Tools → Alarm Clock. See page 106. In the standby screen, press and hold down Vibrating alert 12 the key to activate the vibrating alert. See page 51, "Using the Silent Profile". Normal Shows that the Normal profile is in use. To set the profile, go to this menu: Settings → Profiles. See page 146. Meeting Shows that the Meeting profile is in use. Getting to Know Your Phone Icon Function Description Outdoors Shows that the Outdoors profile is in use. Personal Shows that the Personal profile is in use. Handsfree Shows that the Handsfree profile is in use. Divert Shows that the call divert function is active.To set the call divert function go to the menu Settings → Call Settings → Call Divert. See page 154. Roaming Roaming has been activated (not your regular network) Getting to Know Your Phone 13 Main Screen Status bar Name of network operator Time and date Wallpaper Soft key bar Press to enter the Phone Book 14 Press to enter the main menu. Getting to Know Your Phone Press to use the camera function. can set the animation or image you wish to use as wallpaper / • You when the phone is in standby mode by going to the menu Multimedia → Picture or Animation. Alternatively, you can go to the menu Settings → Display → Wallpaper. See page 133 and page 150. • To set the current time and date, as well as the format in which they will be shown in the main display's standby screen, go to the menu Settings → Date & Time. See page 144. • You can go to the menu Settings → Profiles → Personal to change the name of the profile to your own user name. When this profile is activated, your own name will appear in the standby screen on the main display. For details, see page 147. • For enhanced security, you can use the screen lock function. Go to the menu Settings → Security → Screen Lock. If the screen lock is activated, and you have not performed any tasks with the phone for a set time, the phone will automatically bring up the screen lock image. The purpose is to protect any personal data on your phone from being read by other persons. To restore the original display screen, you must enter a password that you provide for this function. For details on settings, see page 161. • After the standby screen remains for 10 seconds, the soft key bar, time and date, as well as all the other words currently displayed will automatically disappear, showing the full-screen wallpaper. You can also press to display/hide the status bar and words normally shown on the standby screen. Getting to Know Your Phone 15 Icons in the Main Display's Status Bar Icon Function Description Signal strength Signal strength of the network. The more bars indicated, the stronger the signal. Battery status Shows the current level of battery power. The more bars indicated, the more power that remains. Four bars: fully charged. No bars: immediate charging needed. When charging the phone, the icon will scroll through the bars until the battery is fully charged. GPRS network GPRS services have been activated on your SIM card. Shows that an SMS/MMS message is being received or that there are unread messages. Message 16 If the icon appears in red, this indicates that the SIM card's text message memory is full. For information about the message function, see page 61, "Messages Menu". WAP message You've got a WAP message (this icon will only appear when there are no incoming or unread SMS/MMS messages). Voicemail Indicates that you have voicemail messages (this icon will only appear if the function is supported by your network operator). Alarm The alarm is turned on. To set the alarm, go to the menu Tools → Alarm Clock. See page 106. Getting to Know Your Phone Icon Function Description Line in use Shows the number of the line currently in use. To set the line, go to the menu Settings → Call Settings → Active Line. For details, see page 157. Vibrate In the standby screen, press and hold to activate the silent profile. See page 51, "Using the Silent Profile". Normal Shows that the Normal profile is in use. To set the operating mode, go to the menu Settings → Profiles. See page 146. Meeting Shows that the Meeting profile is in use. Outdoors Shows that the Outdoors profile is in use. Personal Shows that the Personal profile is in use. Handsfree Shows that the Handsfree profile is in use. Divert Shows that the call divert function is active. To make settings for this function, go to the menu Settings → Call Settings → Call Divert. See page 154. Roaming Roaming has been activated (not your regular network) Getting to Know Your Phone 17 Using the Keys in the Standby Mode 8 In this user manual, "long-press" means to press and hold down a key for about two seconds before release. "Press" means to press a key and release immediately. 8 The chart below is meant only to introduce the commands accessible with keys when the phone is in standby mode. For information on other key commands available in other operating modes, see the pertinent sections in this user manual. Function keys any key is pressed, the phone will provide aural feedback / • When through keypad tones. To activate or cancel this aural feedback, enter the menu Settings → Profiles. Scroll to the profile currently in use and press (Edit). Then select Keypad Tone. You can also go to Settings → Audio → Keypad Tone to turn the aural feedback on or off. See page 149 and page 153. • After turning the phone on, press any key to activate keypad and display backlighting. To turn the backlighting on or off, and to set the duration of backlighting, go to Settings → Display → Backlight Setting. See page 152. 18 Getting to Know Your Phone Key Commands and functions Power on/off key • Long-press to turn the phone on or off. • Press this key to reject incoming calls or cancel a call being dialed. Send/Answer key • Press to send or answer a call. • Long-press and your phone will automatically call the last number dialed. • Press to access the list of last missed/dialed/received calls. OK key • Press to open up the main menu and show its first item. Left soft key • Press to access the Phone Book (when PBook is shown). • Press to save the phone number keyed in from the standby screen to the Phone Book (when Save is shown). Right soft key • Press this key to use the camera function (when Camera is shown). • Press this key to delete entered digits one by one; longpress to delete all digits entered (when Clear is shown). • Long-press to turn the silent profile on or off. Getting to Know Your Phone 19 Key Commands and functions Scroll key • Press to open the main menu and show its first item. • Press to enter the menu for function and phone number shortcuts. For information about the shortcuts menu, see page 57. • Long-press to activate voice dialing. • Long-press to activate the voice memo function. Messages menu key • Press this key to enter the Messages menu. For a description of the Messages menu, see page 61. Asterisk key • Press this key to enter an asterisk " * ". • To make an international call, long-press this key until the display shows "+" ,Then enter the recipient's country code, area code and phone number. Voicemail key • Long-press to dial your voicemail number. # key • Press to enter "#". • For extensions: After entering a phone number, longpress to enter a "P" and then enter the extension number. 20 Getting to Know Your Phone Key Commands and functions Alphanumeric keys • Press to enter digits in a phone number. • Shortcut key: Long-press a key to immediately access the function, or dial the number, that it represents. See page 57, "Shortcuts Menu". Volume key • Long-press the upper or lower portion of this key, located on the left side of the phone, to adjust the ring tone volume. Press the upper portion of this key or to increase the volume. Press the lower portion of this key or 8 When to decrease the volume. there is an incoming call, long-press the upper portion of the volume key to reject the call; long-press the lower portion to turn off the ring tone. Getting to Know Your Phone 21 Alphanumeric keys Key Digit Key Digit/Symbol/Function * + (long-press) # P(long-press after entering a phone number) 8 Long-pressing an alphanumeric key will access the function it represents, or dial the number that has been assigned to it (shortcut function). 22 Getting to Know Your Phone Menu Navigation When the phone is in standby mode, press or to bring up the main menu and highlight the first item in that menu: Phone Book. 8 For details on how to use the various functions listed in the menu, see page 92, "Menus". can choose a display color for the menus by going to the menu / You Settings → Display → Theme. See page 150. Main menu The main menu item to which you have scrolled will be displayed as an animation. The name of the main menu item you have scrolled to. Each icon represents a sub-menu. Indicates that pressing will return the display to the standby screen. Getting to Know Your Phone 23 Sub-menus The highlighted row is the currently selected item. The name of the current menu. Press to scroll up or down to an item. Press to bring up the previous screen. Press to enter the highlighted menu item for editing. Press to bring up the next screen. Press to return to the previous menu or screen. Press to enter the sub-menu represented by highlighted item or to activate the highlighted function. Pop-up menus Press to scroll up or down to an item. Press to close a pop-up menu. Press to open a pop-up menu. Press to enter the highlighted item or activate the function represented by the item. 24 Getting to Know Your Phone Turning a function on or off Press to turn the selected function on or off (the currently selected function will be highlighted). After the selected function is activated, the display will usually show further setting options. Press to scroll to the desired setting option. Press to cancel and return to the previous screen. Press setting. Press or to edit the setting. to confirm the Getting to Know Your Phone 25 Menu navigation example The example given below demonstrates how to use menus to change the language setting. Regular access 1.In the standby mode, press or menu. to open the main 2.In the main menu, press to scroll to the Settings menu icon. Press menu. to enter this 3.In the Settings menu, press to scroll to the Language item (press to bring up the next screen, or press to bring up the previous screen), then press to enter the Language menu. 26 Getting to Know Your Phone 4.Press to scroll to the language you wish to use. Then press to confirm your selection. If, for example, you wish to set English as the display language, scroll to highlight English, and then press . The display will automatically return to the Settings menu, displayed in English. 5.Press (Back) repeatedly or press once to return to the standby screen. Getting to Know Your Phone 27 Access through number shortcuts 1.In the standby mode, press or to bring up the main menu. 2.The location of items in the main menu corresponds to the position of the to keys in the alphanumeric keypad. Thus, pressing will bring up the Settings menu. 3.In the Settings menu, the alphanumeric keys to represent menu items 1 to 10. Since Language is item number 10 in the Settings menu, pressing will bring up the Language submenu. 28 Getting to Know Your Phone 4.Press the alphanumeric key that corresponds to the language you wish to select, as it is listed in the Language sub-menu. For example, if you wish to set English as the display language, press 5.Press (Back) repeatedly or press once to return to the standby screen. Getting to Know Your Phone 29 Main menu map Select To enter When using the phone book stored in your SIM card's memory, the seventh item is SIM Status. There is no Privacy Manager item. 30 Getting to Know Your Phone Select To enter If your network vendor provides SIM toolkit valueadded services, they will appear as item number 11. Getting to Know Your Phone 31 Select 32 Getting to Know Your Phone To enter Using Your Phone Making a Phone Call Open the flip and make sure that the standby screen is shown on the main display. Enter the desired number using the alphanumeric keys to . Press to dial your call. / During a call, you can use the options. See page 49, "Call Menu". To modify a phone number that you have entered, press (Clear) to delete individual digits. Long-press (Clear) or press all digits entered and return to the standby screen. to delete Ending a Phone Call Press or close the flip to end a call. The display will show the total call time, and then return to the standby screen. / To cancel a call that is being dialed, press or close the flip. 8 If the flip function has not been activated, you cannot end a call or cancel dialing by closing the flip. To activate or cancel the flip function, go to the menu Settings → Flip Activate. 8 If you also have a call waiting or on hold, after you press , the display will show a menu to allow you to choose the call you wish to end. Using Your Phone 33 Answering a Phone Call When a call is received, your phone rings or vibrates, with the display showing the caller's number (if supported by your network vendor). If the caller is a contact stored in the Phone Book, the phone will show the name recorded in the Phone Book. caller is a member of a caller group, the ring tone assigned to / • Ifthisthegroup will sound. The display will show the animation/image that is associated with this group as well, to help you identify the caller. • If you have designated a particular ring tone and animation/image for the caller, the phone will sound that ring tone and display that animation/image, regardless of which caller group that caller belongs to. • For information on setting up a caller group, ring tone and animation/image for contacts in the Phone Book, see page 38, "Adding Contacts to the Phone Book". Depending on whether your phone's flip is open or closed, you can do one of the following to answer a call: • If the flip is closed, opening it will allow you to answer the call. 8 If the flip function has not been activated, you cannot answer a call by opening the flip. To activate or cancel the flip function, go to the menu Settings → Flip Activate. • If the flip is already open, press to answer the call. 8 If you wish to change the answering mode so that you can press any key to answer a call, go the menu Settings → Profiles. After selecting the currently active profile, press Answer Mode → Any Key. 34 Using Your Phone (Edit) and go to Rejecting an Incoming Call • Regardless of whether the flip is open or closed, you can reject an incoming call by long-pressing the upper portion of the volume key on the left side of the phone. • When the flip is open, you can reject an incoming call by closing the flip or pressing 8 If the flip function has not been activated, you cannot close the flip to reject an incoming call. To activate or cancel the flip function, go to the menu Settings → Flip Activate. Turning Off the Ring Tone for an Incoming Call Regardless of whether the flip is open or closed, you can temporarily mute the ring tone for an incoming call to avoid disturbing others. To do this, long-press the lower portion of the volume key on the left side of the phone. After the ring tone has been turned off, you can still open the flip to answer the call. Making an International Call 1. Enter the outgoing international call code, or long-press until "+" appears on the display. 2. Enter the recipient's country code, area code and phone number. Dial the call by pressing Using Your Phone 35 Making an Emergency Call To call emergency services, enter 112 (the international emergency number) and then press to dial the call. You can make an emergency call even if your phone is locked or cannot access your network, or there is no SIM card inserted, so long as you are within range of a network of the type supported by your phone. Dialing an Extension Number After you enter a telephone number, long-press , The phone display will show "P". At this point, you can enter the desired extension number, and then press to dial it. Speed Dialing 8 You must assign a number key as the shortcut for a particular phone number in order to use speed dialing for that phone number. For information on how to set up a shortcut, see page 57, "Shortcuts Menu". After you have assigned a number key to serve as the shortcut key for a particular phone number, you can long-press this key when the phone is in the standby mode to dial the corresponding phone number. For example, if you have selected as the shortcut key for a certain phone number, long-pressing will dial this number. Voice Dialing 1. In the standby mode, long-press 2. After a beep, when the display shows the "Recording…" screen, you can speak the voice dialing prompt for the number you wish to dial. Once the phone has correctly identified the contact associated with this voice dialing prompt, two situations may occur: 36 Using Your Phone a. If there is only one phone number stored for the contact identified, your phone will automatically dial this number. b. If there are two or more phone numbers stored for the contact identified, the display will show the contact's Phone Book data. You can then scroll to the number you wish to dial, pressing or to make the call. 8 To use voice dialing to make a call, you must have stored a voice dialing prompt for the desired number in Phone Book. For details, see page 38, "Adding Contacts to the Phone Book". Listening to Voicemails When your voicemail inbox contains new messages, your network vendor will send a text message notifying you that you have new voicemail messages (if the network vendor supports it, the icons and will be shown in the external and main display's status bars, respectively. There are two ways to access and listen to voicemail: 1. When the phone is in standby mode, long-press to directly dial the voicemail phone number and listen to your voicemail messages. 2. Go to the menu Messages → Voicemail to dial the voicemail number. 8 If the voicemail number is not stored on your SIM card or in the phone itself, you will not be able to access your voicemail by longpressing ,Generally speaking, network operators will store the voicemail number on a SIM card before giving it to you. If so, you will be able to dial your voicemail number by long-pressing when the phone is in standby mode, without needing to first manually store this number. If however your network vendor did not store the number on your SIM card, you will need to do this yourself. To save or modify a voicemail phone number, go to the menu Messages → Message Settings → Voicemail No. Using Your Phone 37 Phone Book Adding Contacts to the Phone Book The Phone Book will have different formats and data headings depending on whether you have chosen to use a phone book stored on your SIM card or in your phone's memory. 8 The phone book in your phone's memory can store up to 500 contacts. The capacity of a phone book on your SIM card depends on the particular service provided by your network vendor. SIM card Phone Book 1. In the standby screen, enter the phone number that you wish to store, then press (Save). The screen will show the Phone Book data fields for a new contact. 2. Press to scroll to the contact data field that you wish to edit. Press (Edit), or simply begin keying in data to enter and edit the currently selected field. After completing data entry and settings, press to store the data for this contact. The data fields provided by a SIM card phone book are as follows: The contact's name. The contact's mobile phone number. 38 Using Your Phone Used to select a caller group for the contact. Press to select a group and then press When there is an incoming call from this contact, the ring tone assigned to this group will sound and the display will show the animation/image associated with the group. 8 To set a ring tone and animation/image for each caller group, go to the menu Phone Book → Caller Group. See page 93. 8 You can also go the menu Phone Book → Caller Group to set a caller group for a contact. Using Your Phone 39 Phone Book in the phone's memory 1. In the standby screen, enter the phone number you wish to store, and then press (Save). The display will show the default data fields for a new contact. 2. In the contact data screen, scroll to the data field that you wish to edit, and then press (Options) to bring up a pop-up menu. You can then use the following options with the contact data: • Edit: Edit the information in the selected field. 8 In the contact data screen, press or begin entering data to directly edit the data in the currently selected field. • Change Type: Change the category of the phone number (for example, from Mobile Number to Home Number). This option can only be used in the phone number data field. • Add New Field: Adds other data fields for a contact. • Delete Field: Removes the selected data field. 3. After completing the data for the various fields, you must press in order for the contact's data to be stored in the Phone Book. 8 If you do not wish to save a modified Phone Book record, press or 40 (Back) to abort. Using Your Phone 8 You can also add a new contact by going to the menu Phone Book → Add. • The default data fields for a contact are as follows: The contact's name. The contact's mobile phone number. The contact's home phone number. The contact's e-mail address. Used to assign a contact to a caller group. Press group, and then press to select a Used to assign a voice dialing prompt to a phone number. After the beep, speak the contact's name into the microphone. After it is successfully recorded, the phone will play back this voice dialing prompt. • In addition to the contact data fields described above, you can also add the data fields listed below by pressing (Option) when the Phone Book screen is visible and then selecting Add New Field. The contact's mobile phone number. The contact's home phone number. The contact's work phone number. Other phone number for the contact. The contact's home address. The contact's work address. Using Your Phone 41 The contact's company name. The contact's department name. The contact's job title. Used for notes about the contact. Used to mark dates of special significance associated with the contact. Used to set a ring tone for the contact. When there is an incoming call from the contact, the phone will play this ring tone. 8 A ring tone set in this field will replace the one associated with the contact's caller group, if any. Used to set the photo that will appear on the phone's display when there is an incoming call from the contact. 8 The photo set in this field will replace the animation/image associated with the contact's caller group, if any. 42 Using Your Phone Finding Contacts in the Phone Book In the standby mode, press (PBook) to display contacts stored in the Phone Book. There are two ways to locate a specific contact in the Phone Book: • Press to scroll through the names (listed in alphabetical order) until the one you want is highlighted. • Press the alphanumeric key that corresponds to the first letter of the name you wish to locate the appropriate number of times. For instance, if the name starts with "K", you would press twice for "K". The names starting with "K" will appear, with the first one highlighted. Press to scroll to the name you want. 8 You can also go to the menu Phone Book → Find, and then enter the full name or the first letter of the name to locate a contact. When the desired contact's name is highlighted, you can do one of the following: • Press to dial the first phone number saved in that contact. • Press (Option) to bring up a pop-up menu, which contains the following items: Edit: Edit the Phone Book data for this contact. When you are finished, press 38. . For more information on editing, see page 8 If you do not wish to save a modified Phone Book record, press (Back) or to abort. Using Your Phone 43 Copy to SIM (Phone): If you are currently using a phone book stored in the phone's memory, you can copy the contact's data to the phone book stored on your SIM card. Conversely, if you are currently using a phone book stored on your SIM card, you can copy the contact's data to the phone book stored in the phone's memory. 8 The only information that can be copied from a phone book stored in the phone's memory to the one on your SIM card is a contact's name, phone number, and caller group. If a contact has more than one phone number associated with it, when that contact's data is copied from the phone to the SIM card's phone book, each phone number will be stored as separate contact. Delete: Erases the contact's data from the Phone Book. vCard: Attaches the contact's data to a message and send it to others. For details on writing and sending a message, see page 63. Send • Press to show the information in all data fields for that contact. You can then perform the following tasks: Scroll to the number that you wish to dial, and then press or Scroll to the desired data field. If the complete contents cannot be displayed on the screen, or there is no content to display (for example, Note ), press to display the complete contents (if the data field is for a voice dialing prompt , you can press to play the sound of this voice dialing prompt. Press (Option) to bring up a pop-up menu that contains the following items: 44 Using Your Phone • Edit: Used to edit the Phone Book data for this contact. For information on editing, see page 38. 8 If you do not wish to save a modified Phone Book record, press or (Back) to abort. • Copy to SIM (Phone): If you are currently using a phone book stored in the phone's memory, you can copy the contact's data to the phone book stored on your SIM card. Conversely, if you are currently using a phone book stored on your SIM card, you can copy the contact's data to the phone book stored in the phone's memory. • Delete: Erases the contact's data from the Phone Book. • Call: Dial the currently highlighted number. Last Missed, Dialed, and Received Calls There are two ways you can view the last missed, dialed, and received calls on your phone, as well as information on their date and time: 1. If there have been any missed calls, the display will show a missed call message along with the number of calls that were missed. Press (View), and then press number. to scroll to the desired phone 2. In the standby mode, press to view the list of the most recent missed, dialed, and received calls. Press number. to scroll to the desired phone Using Your Phone 45 8 The icon will appear beside missed calls; the icon appear beside dialed calls; the calls. will will appear beside received 8 If a phone number has already been stored in the information for a contact in the Phone Book, the display will show the name of this contact. 8 If a call for the same number has been missed, dialed, or received two or more times, a note such as "x02" will appear beside the record of the call to show the number of times it was missed, dialed, or received. 8 If your network operator is not able to display a certain call's number, the list will not show a number for the call. When the number for a missed, dialed, or received call is highlighted, you can perform the following tasks: • Press to re-dial the number. • Press (Option) to bring up a pop-up menu: Call: Dial the phone number. Save (Edit): If the phone number for the call has not been stored in the Phone Book, select the Save option to create a contact for this number in the Phone Book. If this phone number is already stored under a contact in the Phone Book, select the Edit option to edit this information for this contact. For information about editing Phone Book data, see page 38, "Adding Contacts to the Phone Book". Delete: Erases the record of the call from the list. 46 Using Your Phone Delete • Press All: Erases all the calls in the list. to display the details on this call. The date and time of the last time this call was made. This name of the contact for the call (if the phone number has not been stored in the Phone Book, "Unknown" will be displayed. The phone number for the call. Press (Option) to select whether to dial the number, store or edit it, or erase the record of the call. Operations During a Call 8 The following options marked with an asterisk (*) are dependent on network support and may require a subscription. Adjusting the Earpiece Volume During a call, you can press the volume key on the left side of the phone to adjust call volume. Mute Press (Mute) to turn off the microphone. The person on the other end of the line will not be able to hear your voice. To restore the microphone's function, press (Unmute). Putting a Call on Hold* 1. When the only call is active: a. Press (Hold) to hold this call. Using Your Phone 47 b. Press to end this call. 2. When the only call is on hold: a. Press (Unhold) to resume the call. b. Press to end this call. 3. When there is an active call and a call on hold. a. Press (Swap) to resume the call that is on hold, and put the active call on hold. b. Press end. to show on the display a list of calls that you can Making a Second Call* Enter a phone number, or select one from the phone number or call record, and then press to dial it. The currently active call will automatically be placed on hold. However, if there is already one active call and another on hold, this action will fail. Call Waiting* If there is an incoming call while you are on the phone, a tone will sound through the earpiece and the display will show that a second call is currently waiting. You can handle the waiting call and currently active call in the following ways: 1. Answer the waiting call: Press The currently active call will automatically be placed on hold. However, if there is already another call on hold, a menu will appear on the display allowing you to select a call to end and then answer the waiting call. 2. Reject the waiting call: Press or (End). Pressing (End) will immediately reject the waiting call; pressing will bring up a menu on the display that you can use to select a call to end. 48 Using Your Phone Call Menu If you press during a call, it will bring up the call menu. Press to scroll to the desired item (press by page) and then press to scroll through the menu page to enter that item; press return to the pervious menu; press menu. (Back) to to return directly to the call 8 Items marked with an asterisk (*) depend on network support and may require a subscription. Phone Book Accesses data in the Phone Book. For details, see page 38, "Phone Book". Call Records Allows you to view information on missed, received, and dialed calls. See page 45, "Last Missed, Dialed, and Received Calls". Conference* Conference calls allow you to converse with more than one party at a time. The conference menu contains the following options: 8 The maximum number of parties that can be accommodated during a conference call depends on the particular service provided by a network vendor. Hold/Unhold/Swap* Toggles the call status. Using Your Phone 49 Join/Private Adds a party that is on hold to the current conference call, or isolates a single party in a conference call and puts all other parties on hold. Forward Allows two parties to connect, while ending one's own call (one of the two parties may be involved in an active call while the other is either on hold or being dialed), so as to allow the two parties to have their own call. Send DTMF When the phone is connected with other devices or services, you can send DTMF (Dual Tone Modulation Frequency) strings. DTMF strings are keypad tones that can be sent via the microphone as you dial another number. Your phone will emit the tones in order to communicate with answering machines, pagers, computerized telephone services, and so forth. Enter the phone number and then press End Call End All Ends all calls, whether active or on hold. End Active Ends only the active call. End Hold Ends only a call or calls on hold. 50 Using Your Phone to send the DTMF string. End One Ends only a single call. Hold/Unhold/Swap Toggles the call status. Mute/Unmute Activates/cancels the silent mode. SMS Enters the SMS (Short Message Service — i.e. text message) menu. For details on the SMS menu, see page 61, "Messages Menu". Calculator Allows you to use the calculator. For information about the calculator, see page 108. STK Brings up the menu for the STK (SIM Toolkit) services provided by your network vendor. Using the Silent Profile From the standby screen, you can long-press to activate the Silent profile. Once it is activated, the phone will alert you to an incoming call by vibrating with no ring tone. • When you long-press to activate the Silent profile, the phone will vibrate for one second. The icon will appear in the main display's status bar (the external display will show ) to remind you that your phone is currently using the Silent profile. Using Your Phone 51 • To cancel the Silent profile and restore the previously active vibrant and ring tone settings, long-press This feature is very convenient for switching to the Silent profile during, say, a meeting to avoid the disruption caused by a ring tone. 8 To set and select a profile, please enter the main menu's Settings → Profiles. See page 146. Camera Function You can take photos using your phone's embedded camera, and then set photos as wallpapers for the main display's standby screen, or send them to others through MMS. 1. From the standby screen, press the view finder. (Camera), which will bring up You can also use the camera by going to the menu: Tools → / Camera. 2. Press (Option) to make the following settings for the camera: • Resolution: Sets the desired resolution for photographing. You have the following resolution values to choose from: Option Represented Resolution High 640 x 480 Medium 320 x 240 Low 160 x 120 Lowest 80 x 60 8 The Face Mask option below will not be available if resolution is set to Low (i.e. 80 x 60). 52 Using Your Phone • Light Condition: Based on the light conditions of the environment selected in this option, the camera will automatically adjust the its color balance in order for you to take best-quality pictures. • Free Space: Shows the amount of remaining available memory for storing photos. • Face Mask: After you have selected this option, the camera's view finder will display a mask that is used to position the face of the person being photographed in good focus, in order for you to later obtain the best results when changing the person's facial expressions using the Face Morph function. See page 55 for details. To cancel the Face Mask function, press and then select Normal Preview. (Option), 3. After you have completed necessary camera settings, press (Back) to return to the view finder screen, and when your object is in focus, press to photograph the object. Its photo will then show up on the main display. Please note the following while shooting photos • The external camera does not have a flash. Please take photos in a well-lit area. • When taking photos, do not block or touch the camera lens on the back of the phone. • Always photograph your object with the source of light behind you. • Do not shake the phone when taking photos. • Please be sure that the lens is perfectly clean before taking photos. Use a soft cloth to wipe the lens if it is not clean. Using Your Phone 53 4. Press (Save) to save this photo to the menu: Multimedia → Album. If you are not satisfied with this photo, press (Back) to take a new photo. After you have saved a photo to the phone's memory, you can manage this photo using the options below: • Send Photo: This option enables you to send this photo to others through MMS. You can also do so by either selecting the menu: Messages → Create → MMS, or by selecting Multimedia → Album. For details on using the MMS function, see page 66. • Set to Wallpaper: Designates this photo as the wallpaper for the main display's standby screen. You can also do so by using the menu: Multimedia → Album, or by using Settings → Display → Wallpaper → Photo. See page 139 and page 150. • Set to Phonebook: You can use this photo as a phone book contact's visual caller ID. When there is an incoming call from that contact, the phone's display will show this photo. New Entry: Enables you to create a new contact in the Phone Book using the photo as her/his caller ID. Exist Entry: Uses this photo as an existing contact's caller ID. Select the contact you want and press to that contact. to attach the photo 8 This function is only available for contacts saved in the phone memory's phone book. Please go to the menu: Phone Book → Database to select the Phone Book for use. • Rename: Give this photo a new file name. 8 A photo's name can't be left empty, nor can it share the same name with another photo already stored in your phone. • Details: Shows the photo's name, date, resolution, and file size. 54 Using Your Phone • Face Morph: If you have activated the Face Mask option before photographing someone, after a photo is taken and saved, you will be able to change her/his facial expression shown in the photo with this Face Morph feature, and then save photos showing different expressions of the same person. Please follow the steps below to perform the Face Morph function: a. After pressing to select the Face Morph option, the screen will show "Press number key to change," and then will bring up the original photo with the person's face remaining unchanged. At this point, you can press a corresponding number key to generate the desired facial expression effects for the person's face. The chart below shows each number key and their matching expression effects: Key 8 Press Expression Key Expression Smile Angry Young Funny Slim Alien Kiss Koala Sleepy Monkey Sad Fox (Normal) to show the original photo without any expression effects added. Using Your Phone 55 b. Press to intensify/reduce expression effects. Intensity levels will be displayed at the top right corner of the screen ranging from 1 to 5; the default value is 3. c. When the photo shows desired expression effects for the person's face, press , enter this new photo's file name, and then press to save this photo to the menu: Multimedia → Album. d. After you have saved the photo showing the expression effects you want, the original photo will reappear. Again, you can press corresponding number keys to create more photos showing various facial expressions. You can also go to the menu: Multimedia → Album to / • configure expression effects for faces shown in the saved photos. See page 139 for details. • The Face Morph function may not create desired outcomes when used to change your pets or dolls' facial expressions. 56 Using Your Phone Shortcuts Menu You can use the Shortcuts menu to assign 9 alphanumeric keys as shortcuts to commonly used functions or frequently dialed numbers. (The screen will show preset shortcuts, if any.) Entering the Shortcuts Menu From the standby screen, press to enter the Shortcuts menu. The numbers 1 to 9 displayed in the menu's default screen represent the corresponding 9 alphanumeric keys on the phone. Setting Function Shortcuts 1. In the Shortcuts menu, press to move the selection box to the number key you wish to use as a shortcut key ( is selected in the example on the right). You can also press the actual alphanumeric key 2. Press and use to select it. (Option) to bring up a pop-up menu, to select Add Function. Then press Using Your Phone 57 3. From the Add Function menu, press to select the function to be represented by the shortcut key , and then press Alternatively, you can press a corresponding alphanumeric key to select the function you want. 8 The functions listed in the Add Function menu are selected from various other menus. For details on these functions, see page 92, "Menus". 4. After has been set as the function shortcut key, the '1' icon in the shortcut menu screen will be replaced by the icon for the function assigned to . The top of the screen will display the name of the function currently assigned to this key. 5. Repeat the above step to add or modify function shortcut key assignments. 6. To cancel a shortcut key and restore the key's original function, use to move the selection box to the icon for the shortcut key that you wish to cancel, and then press Delete to cancel the shortcut. (Option). Select 8 If you select Delete All, all shortcut settings will be cancelled. 58 Using Your Phone Setting Phone Number Shortcuts 1. The method for setting a phone number shortcut key is largely the same as for a function shortcut key. After selecting the shortcut key, press (Option) to bring up a pop-up menu. After selecting Add Phone, press to confirm. 2. From the Phone Book, select a contact, and then press 3. Next, from the list of phone numbers for this contact, select the one that you wish to access through the shortcut key, and then press 4. After you have set the shortcut key, the number icon for the key will be replaced by an icon representing a phone number shortcut. The upper part of the screen will display the name of the contact to whom the phone number accessible by the shortcut key belongs. Using Your Phone 59 5. Repeat the above step to add or modify a phone number shortcut. Different categories of phone numbers will be represented by different phone number shortcut icons. Using Function and Phone Number Shortcuts There are two ways to use shortcuts: 1. From the standby screen, long-press to to access the function represented by that key or dial the number it represents. 2. From the standby screen, press menu. You can then: a. Press (GoTo) to enter the Shortcuts to move the selection box to the icon corresponding to the desired key. Then press to access the assigned function or dial the assigned phone number. b. Press the corresponding key to to access the function represented by that key or dial the number it represents. 60 Using Your Phone Messages Menu Besides SMS (Short Messaging Service) and EMS (Enhanced Messaging Service), your phone also supports MMS (Multimedia Messaging service). EMS allows your to insert simple graphics and ring tones in your message, while MMS enables you to send photos, colored images and music using your phone. From the standby screen, press to enter the Messages menu. You can also press when in the standby screen and then enter from the main menu by selecting You can use this Messages menu to read, edit and send SMS, EMS and MMS messages. Additional information about messaging • Memory for storing messages is divided between SIM card memory and the phone's own memory. In the first level of the Messages menu, except for the SIM Folder option, messages saved in Inbox, Outbox, and Drafts are all stored in the phone's memory. • When a new message is received, or when there are unread messages in the phone's or SIM card's memory, the icon will appear in the external display's status bar; the main display will show the to remind you that you have unread messages. icon in its status bar • When a message has arrived, it will be saved either to the the phone's memory or to your SIM card's memory, depending on the preferred memory you have selected in the menu: Messages → Message Settings → Short Message Settings → Save New Msg To (See page 79). Messages saved to the phone's memory will be stored in the menu: Messages → Inbox; messages saved to your SIM card's memory will be stored in the menu: Messages → SIM Folder → Inbox. • If the phone's memory is already full, any new messages will remain stored in the SIM card's memory (in the menu Messages → SIM Folder → Inbox) until the SIM card's memory is itself full. Using Your Phone 61 • If there is a flashing icon on the external display, and the main display shows a red icon , this means that the SIM card's message memory is full. When the SIM card's memory is full, your phone will not be able to receive any new messages. If this has occurred, when you go to the Messages menu, the display will show a "SIM Full!" message to remind you of the current situation. • If the number of messages stored in the phone's memory has reached 500, when you enter the Messages menu, the "Message Full!" screen will appear. If there is less than 1K remaining in the phone's memory, the "Memory Insufficient!" screen will appear. In either of these two situations, any messages received will be saved to the SIM card, and you will no longer be able to edit any messages. • If there is less than 50K remaining in the phone's memory, you will no longer be able to edit any MMS messages; if the amount of the phone's remaining memory is less than that required to save an incoming MMS message, the phone will not be able to receive that message. • In the Messages menu, the number (such as "(1)", "(3)") following the name of each message folder represents the number of messages saved in that folder. The items in the Messages menu are as follows: 62 Using Your Phone Create Short Message 1. Used to bring up the message editing screen so you can write a new SMS/EMS message. Use the alphanumeric keys to enter text. 8 For information on how to use the input methods provided by the phone for writing messages, see page 86, "Input Modes". 8 If no text has been entered in the editing screen, press to return to the standby screen; if some text has been entered, pressing will bring up the prompt "Back to Idle?", to make sure you wish to abort the message being edited. If you press (Yes), you will return to the standby screen; if you press (No), you can continue writing the message. 2. When writing a message, press (Option) to perform the following tasks: • Insert: You can insert the following types of objects: Text: This is a list of templates that can be used instead of entering all the characters individually. You can use the factory default templates or templates of your own that you previously saved to the list. 8 To create your own quick message templates, go the menu Messages → Template → SMS Template. See page 77. Using Your Phone 63 Picture: You can select an EMS icon from the EMS icon library to insert into your message. Press you wish to insert, and then press Press to select the name of the icon (View) to view the icon. to insert the icon into your message. You can select an EMS animation from the EMS Animation: animation library to insert into your message. Press to select the name of the animation you wish to insert, and then press (View) to view the animation. Press to insert the animation into your message. Melody: You can select an EMS ring tone from the EMS ring tone library to insert into your message. When the recipient of the message reads it, the inserted ring tone will be played by the recipient's phone. Scroll to the name of the ring tone you wish to use, and then press to insert the ring tone into your message. The inserted ring tone will be displayed as musical note within the message's text. vCard: You can select a contact's data from your Phone Book to attach to your message. After receiving your message, the recipient can save the attached contact data to their own Phone Book. vCalendar: You can select a Calendar memo and then attach it to your message. After receiving your message, the recipient can save this attached memo to their own Calendar. can insert an EMS icon or animation at any position within a / You message's content. • Text Alignment: Used to select the type of text alignment for the message's content. 64 Using Your Phone 3. After you have finished editing the message, press . A screen in which you can edit the recipient's number will appear. There are two ways you can enter the recipient's phone number: • Key in the recipient's phone number in the number editing screen. • Before entering any phone number, you can press (Select) and then select a recipient from the list of contacts in the Phone Book. Follow the steps below: a. Press to scroll to the name of contact, and then press (Select) to select that contact. b. The display will show all the phone numbers stored for the contact you selected. Press desired phone number. (Select) to select the 8 If the number is too long, press to display the complete number. c. After the number has been selected, you must press to return to the list of contacts in the Phone Book. A check mark will appear beside the contact whose number you selected as recipient for your message. You can use the same steps to select the numbers of other contacts. d. After you have selected all the numbers you wish to dial, press and the display will show all these numbers. 4. After the numbers to be dialed have appeared on the screen, press to use the following options with this message: • Send Message: Sends the message to the numbers selected previously. 8 When a message is to be sent, a copy of the message will be saved to the Outbox folder. If the save fails, the "Save to Outbox Failed!" screen will appear and the send operation will stop. Using Your Phone 65 • Preview: Allows you to view the contents of the message. • Save to Draft: Saves the message to the Drafts folder, for sending at a later time. • Edit Content: Allows you to edit the contents of the message. MMS You can edit and send MMS messages using this menu. 8 Before you start to use MMS, you have to subscribe to both GPRS and MMS services provided by your operator. Then you have to adjust MMS settings in your phone to be able to use MMS. Because MMS uses your operator's MMS server on a GPRS network to send messages to phones, you need to adjust the following settings correctly in order to use MMS: Internet → WAP Service → WAP Settings, and select the MMS server you wish to activate in order to configure its settings. 8 For information on configuring an MMS server's settings, see page 125, "WAP Settings". Messages → Message Settings → MMS Settings → Server Info, and select the server you want to use for sending and receiving MMS messages. Editing and sending MMS messages 1. Access the menu: Messages → Create → MMS to open up the MMS editing screen. You can now edit the first page of your MMS message: MMS message can be made up of multiple pages. / •• An You can also compose an MMS message using a preset MMS template by going to the menu: Messages → Template → MMS Template. See page 77 for details. 2. Edit text: Enter text into the first page's editing screen. 66 Using Your Phone 3. Insert objects: You can insert various types of objects into an MMS page. From the editing screen, press (Option), and then select Insert. The types of objects you can insert into an MMS page are as follows: • Animation: Scroll to highlight the file name of the desired animation, and then press (View) to display this animation. After entering the viewing mode, you can press next/previous animation; pressing to display the will display the animation in full screen. Finally, press to insert the selected animation into the page you are editing. • Picture: After scrolling to highlight the file name of the picture you want, you can press (View) display this picture. After entering the viewing mode, pressing previous picture; pressing screen. Press will display the next/ will display the picture in full to insert the selected picture into an MMS page. • Photo: You can select a photo saved in the Album menu to insert into an MMS page. Scroll to the file name of the desired photo, and then press (View) to view this photo. After entering the viewing mode, pressing will display the next /previous photo. Press to insert the photo into the page you are currently editing. • Voice Memo: Select the file name of the voice memo to be attached to an MMS page. When the desired voice memo's name is highlighted, press (Option) and then select Send to attach this memo to the page you are editing. Using Your Phone 67 • Melody: You can select a ring tone saved in the phone to insert into an MMS page. Scroll to highlight the file name of the desired ring tone, and then press page. to insert this ring tone to the MMS 8 Each MMS page is only able to accommodate one image and one audio file. If you insert another image or audio file into the same page, the newly inserted file will replace the existing one. 8 After an audio file such as a voice memo or a ring tone is inserted into an MMS page, the icon that page. will appear on the top of • Text: You can select a text template to insert into the message instead of entering all the characters individually. You can use the factory default templates or templates of your own that you previously saved to the template list. 8 To create and save your own text templates, go to the menu: Message → Template → SMS Template. See page 77. • New Photo: Enables you to shoot a new photo using the phone's camera and then insert that photo into the currently edited page. 4. When you have completed your message's first page, from this page's screen press (Option), and then select Insert → Page Before/ Page After to add a new page before or after the existing one. You can then repeat the steps described above to compose that newly added page. 5. When you are editing an MMS page, you can also press (Option) to perform the following tasks: • Preview: Plays all of the pages you have created in sequence. • Remove Picture: Removes an image or photo from the currently displayed page. 68 Using Your Phone
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Encryption : Standard V1.2 (40-bit) User Access : Print, Copy, Fill forms, Extract, Assemble, Print high-res Modify Date : 2004:09:30 21:59:39+08:00 Create Date : 2004:09:30 21:58:42+08:00 Title : S660C TC-EN.book Author : jeremy.wu Creator : FrameMaker 6.0 Producer : Acrobat Distiller 5.0 (Windows) Page Count : 84 Mod Date : 2004:09:30 21:59:39+08:00 Creation Date : 2004:09:30 21:58:42+08:00 Metadata Date : 2004:09:30 21:59:39+08:00EXIF Metadata provided by EXIF.tools