Binatone Electronics MH002 Bluetooth Headset User Manual HK255 QSG US EN 20160504

Binatone Electronics International Ltd. Bluetooth Headset HK255 QSG US EN 20160504

Contents

User Manual Part 1

EN
Help & more
• Get help: Visit www.motorolahome.com/support
• Find accessories at: www.motorolahome.com
Manufactured, distributed, or sold by Binatone Electronics
International LTD., oicial licensee for this product. MOTOROLA and
the Stylized M Logo are trademarks or registered trademarks of
Motorola Trademark Holdings, LLC. and are used under license.
Apple logo is a trademark of Apple Inc., registered in the U.S. and
other countries. App Store is a service mark of Apple Inc. Google
Play and Android are trademarks of Google Inc.
All other trademarks are the property of their respective owners.
© 2016 Motorola Mobility LLC. All rights reserved.
Product ID: MH002
Bluetooth ID: MH002
FCC ID: VLJ-MH002
IC ID: 4522A-MH002
HK255
User Guide
At a glance
the important bits, quick and easy
Note: Your battery is designed to last the life of your
product. It should only be removed by a recycling facility.
Any attempt to remove or replace your battery will
damage your headset.
Note: Fully charge before use.
Charge
Call
Button
Power
Switch
O
On
(MicroUSB)
Earhook
Volume
Status
Light
Earpiece
Phone
Tablet
Computer
Connections
Wear
Calls
Music
Press in
to adjust
Ear
Cushion
Connect & go
let’s get you connected
Tip: For daily use, just make sure your headset is on,
and your phone’s Bluetooth feature is on. Your headset
and phone connect automatically.
Turn Bluetooth on.
T
1
On
2
Status Light - Blue flash twice
Status Light - Blue flash rapidely
Turn headset on (charge before use).
Voice prompt: “Ready to pair.”
On
Complete.
4
Voice prompt:
“pairing complete”
3
Enter “0000”
if prompted.
Enter passcode.
Basics
standard features, advanced quality
Calls
Note: Some features are phone/network dependent.
Note: Using a mobile device or accessory while driving
may cause distraction and may be illegal. Always obey
the laws and drive safely.
To...
make a voice
dial call
Press and you
hear a tone.
redial last call Press and hold
until you hear a tone.
mute or
unmute
Press and hold the
Volume button .
end a call Press .
answer a call Press .
Status light
An easy way to check your headset.
status light headset
turning on/o
connecting to your device
battery low
charging - low battery level
charging - mid battery level
charging - battery full
blue flashes twice
rapid blue flashes
rapid red flashes
steady red
steady purple
steady blue
reject a call Press and hold
until you hear a tone.
Advanced
more clever stu
Second device
Using two phones? Or maybe a tablet and a
phone? Pair with two devices.
• Before pairing the second device, turn o the
Bluetooth feature of the previously paired
device. Now pair your second device as
normal, see “Connect & go”.
• Once paired, to connect to both devices
simply turn them on.
• To use headset features, such as voice dial,
and end call, with the desired device, just use
the feature as normal.

Navigation menu