Bissell Proheat2X 9500 P Users Manual

9500-p to the manual e0e57716-74ad-4c78-9876-883ab2b7b03c

2015-01-21

: Bissell Bissell-Proheat2X-9500-P-Users-Manual-238329 bissell-proheat2x-9500-p-users-manual-238329 bissell pdf

Open the PDF directly: View PDF .
Page Count: 24

Download
Open PDF In Browser	View PDF

Earn BISSELL Rewards!
Register your
product today!
See details on
back page

USER'S GUIDE
9500-P
2

Thank You

Safety Instructions

4-5

6-16

17-19

Product View
Assembly
Operations
Maintenance and Care

Troubleshooting

Replacement Parts

Accessories

Warranty

Product Registration

Consumer Care

Thanks for buying a BISSELL PROheat 2X® CleanShot® Deep Cleaner
We’re glad you purchased a BISSELL ProHeat 2X CleanShot heated formula
deep cleaner. Everything we know about floor care went into the design
and construction of this complete, high-tech home cleaning system.
Your BISSELL ProHeat 2X CleanShot deep cleaner is well made, and we
back it with a limited two year warranty. We also stand behind it with a
knowledgeable, dedicated Consumer Care department, so, should
you ever have a problem, you’ll receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today, BISSELL
is a global leader in the design, manufacture, and service of high quality
homecare products like your ProHeat 2X deep cleaner.
Thanks again, from all of us at BISSELL.

Mark J. Bissell
Chairman & CEO

w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions
should be observed, including the following:

Read all instructions before using
your ProHeat 2X® CleanShot®.

WARNING:

To reduce the risk of fire,
electric shock, or injury:

■ Do not immerse.
■ Use only on dry surfaces or surfaces moistened by the
cleaning process.

■ Always connect to a properly grounded outlet.
■ See Grounding Instructions.
■ Unplug from outlet when not in use and before conducting

maintenance or troubleshooting.
■ Do not leave machine when it is plugged in.
■ Do not service machine when it is plugged in.
■ Do not use with damaged cord or plug.
■ If appliance is not working as it should, has been dropped,
damaged, left outdoors, or dropped into water, have it repaired at
an authorized Service Center.
■ Use indoors only.
■ Do not pull or carry by cord, use cord as a handle, close door on
cord, pull cord around sharp corners or edges, run appliance over
cord, or expose cord to heated surfaces.
■ Unplug by grasping the plug, not the cord.
■ Do not handle plug or appliance with wet hands.
■ Do not put any object into appliance openings, use with blocked opening, or
restrict air flow.
■ Do not expose hair, loose clothing, fingers or body parts to
openings or moving parts.
■ Do not pick up hot or burning objects.
■ Do not pick up flammable or combustible materials (lighter fluid, gasoline, kerosene, etc.) or use in the presence of explosive liquids or vapor.
■ Do not use appliance in an enclosed space filled with vapors
given off by oil base paint, paint thinner, some moth proofing
substances, flammable dust, or other explosive or toxic vapors.
■ Do not pick up toxic material (chlorine bleach, ammonia, drain
cleaner, gasoline, etc.).
■ Do not modify the 3-prong grounded plug.
■ Do not allow to be used as a toy.
■ Do not use for any purpose other than described in this User’s Guide.
■ Do not unplug by pulling on the cord.
■ Use only manufacturer’s recommended attachments.
■ Use only cleaning products formulated by BISSELL for use in this
appliance to prevent internal component damage. See the cleaning
fluid section of this guide.
■ Keep openings free of dust, lint, hair, etc.
■ Do not point attachment nozzle at people or animals
■ Keep appliance on a level surface.
■ Turn off all controls before unplugging.

■ Unplug before attaching the TurboBrush®.
■ Be extra careful when cleaning stairs.
■ Close attention is necessary when used by or near children.
■ Always install tank float before any wet pickup operation.

SAVE THESE
INSTRUCTIONS.
This model is for household use
only.

GROUNDING
INSTRUCTIONS

This appliance must be connected to
a grounded wiring system. If it should
malfunction or break down, grounding
provides a safe path of least resistance
for electrical current, reducing the risk of
electrical shock. The cord for this appliance has an equipment-grounding conductor and a grounding plug. It must only
be plugged into an outlet that is properly
installed and grounded in accordance
with all local codes and ordinances.
Grounded
Outlets

Grounding Pin

WARNING:

Improper connection of the equipmentgrounding conductor can result in a
risk of electrical shock. Check with a
qualified electrician or service person
if you aren’t sure if the outlet is properly grounded. DO NOT MODIFY THE
PLUG. If it will not fit the outlet, have
a proper outlet installed by a qualified
electrician. This appliance is designed
for use on a nominal 120-volt circuit,
and has a grounding attachment
plug that looks like the plug in the
drawing above. Make certain that the
appliance is connected to an outlet
having the same configuration as the
plug. No plug adapter should be used
with this appliance.

w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Product view
CleanShot®
Trigger

Spray Trigger

Custom Clean® Dial
Power Switch

Heater Switch

Extra Long
Power Cord
Flex Hose
Upper Handle

Easy Carry
Handle
Heat
Indicator Light

Tank Carry
Handle
ReadyTools™
Dial
2-in-1
Water Tank
CleanShot®

Lower Base
Dry Aire™

Easy To Remove
Nozzle

Edge Sweep®
Brushes

w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Product view
Spray Trigger

Quick Release
Cord Wrap

Upper Hose
Rack

Hose secure
Latch

Crevice Tool
Holder
Lower Hose
Rack

Cleaning fluid
Keep plenty of genuine
BISSELL 2X formula on
hand so you can clean
and protect whenever
it fits your schedule.
Always use genuine
BISSELL deep cleaning
formulas. Non-BISSELL
cleaning solutions may
harm the machine and
will void the warranty.

BISSELL
2X Fiber
Cleansing
Formula with
Scotchgard™
Protection

BISSELL
2X Allergen
Cleansing
Formula

Recline Pedal
SmartMix Tank

WARNING:

To reduce the risk of fire and electric shock due to internal
component damage, use only BISSELL cleaning fluids intended
for use with the deep cleaner. Non-BISSELL cleaning solutions
may harm the machine and void the warranty.

BISSELL
2X Pet Stain
and Odor
Removal
Formula with
Scotchgard™
Protection

BISSELL
2X Spring
Breeze
Formula

BISSELL
2X Crystal
Springs
Formula

BISSELL
BISSELL
2X
2X Hard
Professional Floor
Deep
Solutions
Cleaning
Formula
Formula with
Scotchgard™
Protection

BISSELL
Tough
Stain
PreCleaner

w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Assembly
Your ProHeat 2X CleanShot comes in
three, easy to assemble components:
Upper Handle
Lower Handle
Tool Caddy
The only thing you will need to
assemble your cleaner is a Phillips
head screwdriver.
1. Slide upper handle onto lower handle.

2. Screw 3 screws into the marked holes.

3. Place upper hose rack onto back of
upper handle, and secure with screw.
4. Place lower hose rack onto back of
upper handle by pushing in and sliding
down until it snaps into place.
5. Snap tools into the tool caddy.
6. Wrap power cord and flex hose.
7. Keep flex hose snugly in place by using
the hose secure latch.

ProHeat 2X assembly is now
complete.

Hose Secure Latch

Operations
Special features
Your BISSELL ProHeat 2X CleanShot Professional
deep cleaner is a home cleaning system that
uses the power of heat, brushes and cleaning
formula to get the deep down dirt for a maximum
clean. Not only does it come with a lot of unique
features, it has been designed with you, the customer, in mind.

Built-in-heater feature
BISSELL ProHeat 2X models all feature a patented built-in heater which will heat the hot
tap water you put in up to 25 degrees hotter
to safely optimize cleaning effectiveness. The
heater will never allow the temperature to
exceed 190 degrees. The heater switch on
the front of the machine controls the heater so
you have the option to turn off the heat if you
are cleaning delicate wool or oriental rugs.

w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Operations
Custom Clean®
The Custom Clean feature automatically mixes hot
tap water with the BISSELL formula. Simply choose
one of the 4 settings (heavy traffic, normal clean,
light clean, or water rinse) and the ProHeat 2X
CleanShot Professional will adjust the right amount
of cleaning solution to mix with the heated water
to fit your cleaning need.

CleanShot®
The CleanShot feature gives you the ability to tackle tough stains with the push of a button. Cleaning
solution is sprayed in a concentrated stream, penetrating the stain and allowing for better cleaning
focus. Simply spray and suction and the stain is
gone! CleanShot is especially effective for spots
and stains that would otherwise take a lot of deep
cleaning cycles to remove. It allows the cleaning
formula and machine to do the work for you.

(located on upper handle)

Dry Aire™

Flow Indicator

The Dry Aire system applies heated air directly to
the carpet to help dry as you clean. The feature
runs while your machine is powered.

Flow indicator

CleanShot®

The flow indicator is located on the rear cover
of your unit. When the unit runs out of water
or solution the flow indicator will instantly let
you know.

2-in-1 water tank
Our 2-in-1 water tank full capacity system is
designed with a heavy duty bladder inside for
clean water. As you clean, the clean water in the
bladder will empty and mix with the cleaning
formula. Dirty water pulled out of your carpets will
collect around the outside of the bladder so that
clean and dirty water are always kept separate.
This allows the user to only carry one tank to and
from the sink for emptying and filling.

Dry Aire™

w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Operations
ReadyTools™ dial
This provides either floor cleaning or above
floor cleaning with the turn of a knob. Choose
"TOOLS" setting for stairs, upholstery and
hard to reach areas and "FLOOR CLEANING"
for carpets area rugs and bare floors.

Scotchgard™ Protector
Carpet protection applied at the mill typically
wears down over time from heavy foot traffic and
everyday cleaning, including deep cleaning. To
help restore this important protection, only BISSELL
offers deep cleaning formulas with Scotchgard
protector. This offers extra protection against dirt
and tough stains to keep your carpets looking
good longer.
To maintain your Scotchgard 5-year limited stain
warranty, you no longer are required to hire a
professional. By using your BISSELL ProHeat 2X
machine with BISSELL 2X formulas containing
Scotchgard protector every 12 months, your
carpet warranty from 3M remains in effect. No
other home deep cleaning system can do this for
you. Refer to the Scotchgard protector warranty
for details.

w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Operations
Before you clean

3. Plan your cleaning route to leave an exit
path. It is best to begin cleaning in the
corner farthest from your exit.

SUCTION

8
7

——

—

——

—

S
H TA

EXIT

— ER RT
— E
—
4'
—
—
—

2. Pick up all loose dirt, debris, and
pet hair before deep cleaning. If
you are cleaning just a small area of
carpeting or less than a whole room,
the ProHeat 2X may be used to vacuum
the area before deep cleaning. Be sure
to keep the red filter screen in the 2-in1 tank lid free of lint so that suction is
maintained (see step 4 on page 17).
When you are done vacuuming, clear
the red filter screen of any lint and rinse
both the dirty water and the clean solution
tank (inside the flexible bladder) with
warm water before starting the deep
cleaning process.

BRUSH

1. Move furniture to another area if
cleaning an entire room (optional).
2
3
4

ATTENTION:
Some Berber carpets have a

tendency to fuzz with wear.
Repeated strokes in the same
area with an ordinary vacuum
or deep cleaner may aggravate
this condition. Please see Stain
Removal instructions on page 15.

4. Pretreating (optional)
Pretreating is recommended to improve
cleaning effectiveness for heavily soiled
carpet in high traffic areas such as
entryways and hallways.

Option A: BISSELL Tough Stain
PreTreat
A. Spray the BISSELL Tough Stain
Pre-treat formula onto heavy traffic
areas, soiled areas, or stains.
B. Allow to penetrate for at least 3 minutes.
C. Clean as normal, using the BISSELL
ProHeat 2X machine on the high
traffic setting, following the
instructions below.
Option B: CleanShot
Follow instructions on page 12.

w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Operations
Carpet cleaning

1a.

1b.

1c.

1c. Fill the heavy duty bladder with clean
hot tap water.
*Do not boil or microwave water
1d.
as it can destroy the bladder.

1e.

1. Fill the 2-in-1 Water Tank. Remove the tank
from the base of the machine by lifting up
the tank carry handle. Carry like a bucket
to the sink.
1a. Unlatch the top of the tank from the
bottom by lifting up on the tank latch
located on the back of the tank.
1b. Remove the top of the tank by lifting
up on the handle.

Note how the lip on the top tank
separates from the groove in the
bottom tank. This placement is
important when putting the tank
back together.

1d. Leaving the filled bottom of the tank
on a flat surface, only maneuver the
top of the tank. To attach the top part
of the tank to the bottom, carefully
hook the lip on the top tank into the
groove on the bottom tank.
1e. Fasten tanks together by securing the
latch in the back.

Note: Remember to secure the tank
latch in the back and test to make
sure it is secure before picking up
the tank.

2. Remove formula tank from back of
machine.
3. Fill the formula tank by first unscrewing
the cap and insert. Always use genuine
BISSELL 2X formulas to maximize
cleaning and for the safety of your
machine. Fill with water to WATER
line and then fill up to FORMULA line
with BISSELL 2X Concentrated formula.
Replace formula tank.
4. Set Custom Clean Dial. Simply choose
one of the 4 settings (heavy traffic, normal
clean, light clean, or water rinse).

5. Set ReadyTools Dial to the floor
cleaning setting.

w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Operations
Carpet cleaning continued
6. Plug into a proper outlet and turn the power
and heater switches to the ON ( I )
position. Allow 1 minute for the built-in
heater to warm-up before cleaning. The
ProHeat 2X will be fully warmed and
will provide optimal performance after
a minute of continuous heated cleaning.
7. Cleaning Strokes. While pressing the
trigger, make one slow forward wet
pass and another one back. Caution:
Do not overwet. Take care not to
run over loose objects or edges of
area rugs. Stalling brush may result in
premature belt failure.
Note: Your machine is equipped
with a circuit breaker that will
automatically shut off the brush if
a large or loose object is caught
in the brush roll. If that happens,
be sure to unplug your machine,
remove the foreign object, and
then plug the machine back in to
reset the circuit breaker.

Power Switch

Heater Switch

WARNING:

To reduce the risk of fire and
electric shock due to internal
component damage, use only
BISSELL cleaning fluids intended
for use with the deep cleaner.

Keep plenty of genuine BISSELL
Release the trigger and make one slow 2X formula on hand so you
can clean whenever it fits your
forward and backward pass over the
schedule. Always use genuine
same area to remove any residual
BISSELL deep cleaning formulas.
dirty water and aid in drying. Repeat
Non-BISSELL cleaning solutions
cleaning passes until solution being
may harm the machine and
pulled up appears clean. Continue
void the warranty.
passes without pressing the trigger
until you can’t see any more water
being pulled up.
8.
8a.
8. Remove the tank from the base of the
machine by lifting up on the tank carry
handle. Carry like a bucket to a utility
sink or outside where you will dispose
of the dirty water.
8a. Unlatch the top of the tank from the
bottom by lifting up on the tank latch
located on the back of the tank.
8b. Remove the top of the tank by lifting up
8b.
on the handle.
Note how the lip on the top tank
separates from the groove in the
bottom tank. This placement is
important when putting the tank
back together.

w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Operations
Carpet cleaning continued
8c. Lift the bottom portion of the tank; pour out
dirty water in the sink through the triangular
shaped opening in the corner of the tank.
Note: Check the red lint screen in
the top of the tank and clean if
necessary. You may notice hair &
debris deposits on the carpet or in
the tank that were loosened by the
cleaning action. This debris should
be picked up and thrown away.

Keep plenty of genuine BISSELL
2X formula on hand so you
can clean whenever it fits your
schedule. Always use genuine
BISSELL deep cleaning formulas.
Non-BISSELL cleaning solutions
may harm the machine and
void the warranty.
8c.

8d. Fill the heavy duty bladder with clean
hot tap water, following instructions 1c
through 1e on page 10.
Note: Remember to secure the
tank latch in the back and test
to make sure it is secure before
picking up the tank. Always check
the level of cleaning formula in
the formula tank at the same time,
8d.
and refill as needed.

9. Water rinse (optional). Rinsing is an optional step that can be done during the cleaning process or after the carpeted area has
been completed. Switch to the water rinse
setting, on the Custom Clean dial and
follow the same path as you did for cleaning. Take care to do a forward (wet) stroke
by depressing the trigger, and a backward
(wet) stroke, followed by a forward and
backward (dry) stroke, releasing the trigger.
Continue this until the water you see coming
up the nozzle is clear. (see page 17.)
10. CleanShot. CleanShot is an optional fea- 10B.
ture that can be used to fight tough stains. It
can be used as either a tough stain pre-treat
or can be used during the deep cleaning
process itself. To use CleanShot either as a
pre-treat or during deep cleaning, follow the
instructions below.
A. Set Custom Clean for the desired
setting.
B. Press the CleanShot button and
aim the focused stream onto the
stain. Allow the formula to soak in
for 30 seconds.
C. Run the machine over the stain to
extract. Repeat as needed until the
stain is gone.
D. Rinse if desired.

Clean Shot

w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Operations
Cleaning with attachments

bvh
g kvh
gh j j h
d b lg
fd hn l kl
sd jkn f h
Ad bj jh
b j
cv hh
gcg

Your ProHeat 2X machine comes
equipped with a hose and at least
one attachment for cleaning stairs,
upholstery, and more.
1. Important! If using to clean upholstery, check upholstery tags.
A. Check manufacturer’s tag before cleaning. “W” or “WS” on the tag means
you can use your ProHeat 2X. If the tag
is coded with an “X” or an “S” (with a
diagonal stripe through it), or says “Dry
Clean Only”, do not proceed with any
deep cleaning machine. Do not use
on velvet or silk. If manufacturer’s tag is
missing or not coded, check with your
furniture dealer.
B. Check for colorfastness in an inconspicuous place.
C. If possible, check upholstery stuffing.
Colored stuffing may bleed through
fabric when wet.
D. Plan activities to allow upholstery
time to dry.
E. Vacuum thoroughly to pick up loose
debris and pet hair. Use a vacuum
with a brush attachment and a crevice
tool to clean in fabric folds.
2. Follow the instructions on page 10 for filling
the 2-in-1 water tank and the formula tank.

Manufacturer’s tag

WARNING:
To reduce the risk of injury, be
extra careful when cleaning
stairs. Make sure machine is
secure and level.

3. Set ReadyTools dial to the "TOOLS"
setting. This will allow spray and suction
from the hose.
4. Set custom clean dial for heavy traffic,
normal clean, light clean, or water rinse
as desired.
5. Attach the cleaning tool to the end of the hose.

6. Plug in and turn on the power switch and
heater (if desired).
7. Clean by pressing the trigger to spray
solution onto the area to be cleaned.
Slowly move the tool back and forth over
the soiled surface. Release the trigger to
suction soiled water. Continue to clean in
the area, working in small sections, until no
more dirt can be removed. Rinse (optional)
and suction as needed.
Caution: Do no overwet.
w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Operations
Cleaning with attachments continued
8. Remove and rinse tools in clean, running
water. Dry and replace in the tool caddy.
9. It is recommended that you suction clean
water from a bowl to rinse out the hose.

10.

10. Before replacing lift end of hose and
stretch out to ensure all water is cleared
from hose.
11. Coil flex hose around the tool caddy.
12. Empty 2-in-1 water tank and rinse out,
following the instructions on page 12.
13. Return ReadyTools dial to floor setting.

Deep reach tool attachment
(Select models only)
Do Not Delay! Attending to an accident soon after it occurs ensures the
most optimal clean. Leaving it for an
extended period of time may cause
it to set and become permanent.
1. Follow the instructions on page 10 for filling
the 2-in-1 water tank and the formula tank.
2. Follow instructions 3-6 on page 13 under
"Cleaning with attachments".

3. Set tool on stain and press the trigger to
spray solution onto the area to be cleaned.
4. Slowly move the tool back and forth
over the soiled surface, keeping the tool
in contact with the carpet.

5. Release trigger and move tool slowly
over the soiled area to suction up water
and dirt.
6. Continue to clean the area, working in
small sections, until no more dirt can be
removed.

7. Remove tool from hose when finished.
Clean under warm water before storing.

w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Operations
Stain removal
Do Not Delay! Attending to an
accident soon after it occurs ensures
the most optimal clean. Leaving it
for an extended period of time may
cause it to set and become
permanent.
1. Blot up liquids with an absorbent cloth or
paper towels. White materials are recommended because certain dyes may bleed
and make the stain worse.
2. Gently scrape up any semi-solids with a
spoon or spatula. Do not use a knife or other
utensil with sharp edges because it could
damage the carpet or upholstery.
3. If the area has dried, remove the
remaining semi-solids and residue with a
sweeper or vacuum.
4. Be sure to test any spot removal formulas
in an inconspicuous area first. This is
important as some dyes and materials
could be damaged or discolored by
cleaning solvents. If such a change should
occur, try a different solution or call a professional.
5. If cleaning on Berber carpeting, gently
run your machine over a hidden area. If
no fuzzing occurs, continue cleaning in
soiled area.
6. Using the BISSELL Tough Stain PreCleaner,
spray evenly over soiled area. Do not
overwet. Wait 3-5 minutes. Gently work
the solution by blotting area with a clean,
damp, color safe cloth.
7. CleanShot. CleanShot is an optional
feature that can be used to fight tough stains.
It can be used as either a tough stain
pre-treat or can be used during the deep
cleaning process itself (see page 12).
8. Clean using either the FLOOR
CLEANING, or TOOLS setting on the
ReadyTools dial.

w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Operations
Hard floor cleaning

WARNING:

Your ProHeat 2X model may have
come with a hard floor attachment
and 2X Hard Floor Solutions Formula.
If not, these products are available
for purchase by contacting the BISSELL
Consumer Care department by phone
or at the website. The hard floor tool
provides effective cleaning for linoleum,
vinyl, and tile floors. Caution: Do not
use on unsealed hardwood floors.
1. Vacuum or sweep thoroughly to pick up
any loose debris and pet hair.

To reduce the risk of fire
and electric shock- when
cleaning a hard floor, the
BISSELL hard floor tool
203-5642 must be used
and it must only be used
with BISSELL Hard Floor
Solutions or BISSELL 2X
Hard Floor Solutions
cleaning fluid intended for
use with this appliance.

2. Move any furniture, if needed.

WARNING:

3. Fill the formula tank to "WATER" line
with water. Fill to "FORMULA" line with
BISSELL 2X Hard Floor Solutions.

To reduce the risk of fire,
electric shock or injury
unplug from outlet before
servicing.

4. Fill the 2-in-1 water tank with hot tap
water and set aside.
5. Attach the hard floor tool onto the bottom of the machine by hooking it into
the nozzle and swinging it down until it
clicks into place.

6. Set ReadyTools dial to the "FLOOR
CLEANING" setting.
7. Set the Custom Clean dial to normal clean.
8. Plug into an outlet and turn the power
switch and heater ON ( I ).
9. Slowly move the machine forward and
back over hard floor surface one time
while depressing trigger.
Caution: Do not overwet.
10. Repeat the motion without pressing the
trigger using the hard floor tool to squeegee and suction up the dirty water.
11. Allow adequate time for floors to dry.
12. Remove hard floor tool, rinse and dry
before storing.
13. Rinse out the formula tank.

w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Maintenance and care
Machine storage
Once your cleaning is complete, make sure
the 2-in-1 water tank is emptied, rinsed out,
and dried before the next use. The formula
tank can remain filled and ready to go.

WARNING:
To reduce the risk of fire,
electric shock or injury
unplug from outlet before
servicing.

Note: Store cleaner in a protected,
dry area. Since this product uses
water, it must not be stored where
there is a danger of freezing.
Freezing will damage internal
components and void the warranty.

Machine care
For best results, a few simple steps can
assure your machine is well maintained
after your cleaning is complete.
1. Flush your machine of any remaining
residual solution.
A. Fill the 2-in-1 clean water tank with
clean hot tap water.
B. Plug your machine into a proper outlet
and set the Custom Clean dial to the
rinse setting. Turn the power on by
pressing the power button.
C. Recline the handle and press the spray trigger for 15 seconds while making forward
and backward passes on carpet. Release the
trigger to suction. Repeat for another 15 seconds. Continue without pressing the trigger
until there is no more water being suctioned.
2. Turn power and heater switches OFF (O).
Unplug the machine and wrap the power
cord. Empty the 2-in-1 water tank.
3. Rinse out 2-in-1 water tank, with running hot
tap water, taking care to clean underneath
the heavy duty bladder, and all around it.

Tip:

Let all parts dry completely
before storing

3&4

Filter

4. The top half of the tank can be rinsed clean
through the nozzle area. Also, pop out the
red filter underneath the top half of the tank
and rinse out. Replace before putting the
top and bottom halves of the tank together.
5. Before you place the cleaned 2-in-1 water
tank back onto the machine, simply unscrew
the floor nozzle using a Phillips head
screwdriver. This can be rinsed out at the
faucet. Then replace back onto the machine
by starting from the bottom of the nozzle and
hooking the tabs into the holes on the bottom
sides of the machine. Secure into place with
the screw.
w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Maintenance and care
Machine care continued

WARNING:

6. The inside of the end caps by the brush
rolls can be wiped out with a clean paper
towel, or, if a more thorough cleaning is
desired, the end caps can be taken off
using a Phillips head
screwdriver and
rinsed clean. Replace after cleaning.

To reduce the risk of fire,
electric shock, or injury,turn
power OFF and disconnect
plug from electrical outlet
before performing maintenance or troubleshooting.

7. Any loose hair or debris can be pulled from
the brush rolls and thrown away. For the
most thorough clean before storage, follow
directions on pages 18 & 19 for removal
and replacement of the brush rolls and belts.
8. To clean attachments that may have been
used, remove from hose and rinse under
clean, running water. Dry and replace
attachment in the tool caddy. Clean the
hose by suctioning clean water from the tap.
Before replacing, lift end of hose and stretch
out to ensure all water is cleared from hose.
Refer to page 14.

9. After carpet is dry, vacuum again to
remove hair and fuzz.

Small belt removal and replacement
Occasional replacement of one or
both belts may become necessary.
If that is needed, please follow the
instructions below.
1. Turn off the machine, and unplug it from
the outlet.
2. Remove both the 2-in-1 water tank and
the formula tank. Set aside.

3. Unscrew the front nozzle and remove it.
Set aside.
4. Turn the machine on its side.
IMPORTANT: cord side down.
5. Remove the clear end cap by unscrewing the 2 black screws. Take care not to
drop the screws into the unit.
6. Remove 1 silver screw.
7. Remove pivot arm by gently lifting up.
8. Remove small brush belt.
9. Replace small brush belt, and reverse
steps above.

w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Maintenance and care
Brush removal and large belt replacement
Brushes can be removed for cleaning
or replacement as needed.
1. Follow small belt removal Instructions on
page 18.

WARNING:
To reduce the risk of fire,
electric shock or injury
unplug from outlet before
servicing.

2. Remove brush rolls by pulling them off
of the metal rods.
3. Place cleaned or new brush rolls back
onto the rods. Make sure one washer is
on each end of the rollers prior to sliding
onto the rod. Be sure to let the rod slide
through the bushing to insure proper fit.

4. Re-attach the long belt on the bottom to
the cogs of the small roller brushes.
5. Place small belt over back roller and
metal cog.
6. Place pivot arm in place and screw in
place using the silver screw.
7. Re-attach clear end cap by tightening
with the (2) black screws.
8. Return front nozzle to front of unit, by
latching from underneath and then
securing with a screw.
If you have any questions or are
having trouble installing or replacing
your belt(s) or brushes, please call
BISSELL Consumer Care at
1-800-237-7691.

w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Troubleshooting
Built-in heater ready light does not illuminate
Possible causes
1. The heater switch is not turned ON ( I )

Remedies
1. Turn the heater switch ON ( I )

2. The power switch is not turned ON ( I )
2. Both switches must be ON ( I ) to activate the
heater ready light

Reduce Spray or No Spray
Possible causes
1. Water tank may be empty

Remedies
1. Fill heavy duty bladder with hot tap water

2. Formula tank may be empty
2. Fill formula tank with BISSELL 2X
Formula for cleaning
3. Tank may not be seated completely

3. Turn power OFF (0). Remove and reseat tank

4. Pump may have lost prime.
4. Turn power OFF (0) and then back ON (I). Wait one minute,
then depress trigger

DirtLifter® PowerBrush does not turn
Possible causes

Remedies

1. The belt is off or broken
1. Turn power OFF ( O ) and unplug unit from outlet. Follow
instructions on page 19
2. The unit is in the upright position
2. Brushes only rotate when unit is reclined using the
detent pedal
3. Circuit breaker on machine may have tripped
3. Turn the machine OFF ( O ) and unplug from outlet. Check
to see if foreign object is caught in brush roll. Remove
object. Plug machine in to reset circuit breaker

Cleaner not picking up solution
Possible causes
1. ReadyTools dial may be at wrong setting

Remedies
1. Set ReadyTools dial to either FLOOR CLEANING or TOOLS setting

2. Tank may not be seated properly
2. Pick up both the 2-in-1 water tank and formula tank and
reseat them so they fit snugly on the unit
3. Tank may not be assembled properly
3. Check to make sure the "lip" of the nozzle is securely
hooked into the groove on bottom of Tank (see page 10)
4. Solution or 2-in-1 water tank is empty

4. Check fluid levels in heavy duty bladder and formula tank.

5. 2-in-1 water tank has picked up maximum dirty water
5. Empty 2-in-1 water tank. Refill heavy duty bladder with
and red float door has closed. clean hot tap water and replace.
6. Red float "door" in the tank may have closed as a result of bumping 6.
an object or moving machine back and forth too quickly

7. Red lint screen is dirty.

Turn the machine OFF ( O ), allowing red float door to release
into the open position. Turn unit back ON ( I ) to continue
cleaning. Be sure your forward and backward strokes are done
at a slower pace.

7. Clean red lint screen (see page 17).

Other maintenance or service not included in the manual should be
performed by an authorized service representative.

Thank you for selecting a BISSELL product.

Please do not return this product to the store.
For any questions or concerns, BISSELL is happy to be of
service. Contact us directly at 1-800-237-7691.
20

w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Replacement parts - BISSELL ProHeat 2X
Below please find a list of common replacement parts. While not all of these
parts may have come with your specific machine, all are available to you for
purchase, if desired.

Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18

Part No.

Part Name

203-6611 Grey Tank Assembly (complete)
203-6660 Grey Tank Lid
203-6618 Grey Tank Bottom
203-6675 Cap and Insert for Water Tank
203-6676 Formula Tank (includes Cap & Insert for Formula Tank)
203-6677 Cap and Insert for Formula Tank
203-6678 Front Nozzle (includes gasket)
203-6679 Autoload Gasket (fits both Water and Formula Tank)
203-6845 Float Door
203-6680 Tank Filter (Lint Screen)
203-6682 Cord Wrap (Black)
203-6685 Clear End Cap w/Edge Brushes (2 pack, includes screws)
203-6686 Brush Roll – 6 row (includes 1 brush, axle, 2 swivel arms)
203-6688 Small Brush Belt (non-cord side)
203-6804 Large Brush Belt (cord side)
203-6689
Hose Secure Latch
203-6690
Hose Rack Assembly (Top/Bottom Hose Rack, Screws)
203-6994 CleanShot Cover

*Not all parts are included with every model.

w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Accessories - BISSELL ProHeat 2X
Below please find a list of common accessories. While not all of these parts
may have come with your specific machine, all are available to you for
purchase, if desired.

Item

Part No. Part Name

1
203-6651 3” Tough Stain Tool
2
203-6652 Powered TurboBrush® Hand Tool
3
203-6653 4” Upholstery Tool
4
203-6654 6” Stair Tool
5
203-6655 Spraying Crevice Tool
6
203-5642 Bare Floor Tool with trial size bottle of Hard Floor Solutions formula
7
203-7412 Deep Reach™ Pet Tool
8
62E5-2
2X Fiber Cleansing Formula with Scotchgard™ Protection 60 oz.
9
99K5-2
2X Pet Stain and Odor Removal Formula with Scotchgard™

Protection 60 oz.
10
89Q5-2
2X Allergen Cleansing Formula 60 oz.
11
7191
2X Crystal Springs Formula 60 oz.
12
26V2
2X Spring Breeze Formula 60 oz.
13
78H6-3
2X Professional Deep Cleaning Formula with Scotchgard™ Protection 48 oz.
14
56L9
2X Hard Floor Solutions Formula 16 oz.
15
4001 Tough Stain PreCleaner 22 oz.
*Not all parts are included with every model.

w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Warranty - BISSELL ProHeat 2X
This warranty gives you specific legal rights, and you may also have other rights which may vary
from state to state. If you need additional instruction regarding this warranty or have questions
regarding what it may cover, please contact BISSELL Consumer Care by E-mail, telephone, or
regular mail as described below.

Limited Two Year Warranty

Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product
BISSELL will repair or replace (with new or remanufactured components or products), at BISSELL’s
option, free of charge from the date of purchase by the original purchaser, for two years any
defective or malfunctioning part.
See information below on "If your BISSELL product should require service".
This warranty applies to product used for personal, and not commercial or rental service. This
warranty does not apply to fans or routine maintenance components such as filters, belts, or
brushes. Damage or malfunction caused by negligence, abuse, neglect, unauthorized repair, or
any other use not in accordance with the user's guide is not covered.

If your BISSELL product should require service:

Contact BISSELL Consumer Care to locate a BISSELL Authorized Service Center in your area.
If you need information about repairs or replacement parts, or if you have questions about
your warranty, contact BISSELL Consumer Care.
Website or E-mail:
www.bissell.com
Or Call:
BISSELL Consumer Care
1-800-237-7691
Monday - Friday 8 am - 10 pm ET
Saturday 9 am - 8 pm ET
Or Write:
BISSELL Homecare, Inc.
PO Box 3606
Grand Rapids, MI 49501
ATTN: Consumer Care
BISSELL IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE
ASSOCIATED WITH THE USE OF THIS PRODUCT. BISSELL’S LIABILITY WILL NOT EXCEED THE
PURCHASE PRICE OF THE PRODUCT.
Some states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to you.
*EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTY
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES EITHER ORAL OR
WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION OF LAW, INCLUDING
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED TO THE Two YEAR DURATION FROM THE DATE OF PURCHASE AS DESCRIBED ABOVE.
Some states do not allow limitations on how long an implied warranty last so the above limitation
may not apply to you.

w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Don't forget to register your product!
Registering is quick, easy and offers you benefits over the lifetime of your product.
You’ll receive:
BISSELL Rewards Points
Automatically earn points for discounts and free shipping on future purchases.
Faster Service
Supplying your information now saves you time should you need to contact us with
questions regarding your product.
Product Support Reminders and Alerts
We’ll contact you with any important product maintenance reminders and alerts.
Special Promotions
Optional: Register your email to receive notice of offers, contests, cleaning tips and more!

Visit www.bissell.com/registration now!

BISSELL consumer care
For information about repairs or replacement parts, or questions about your warranty, call:

BISSELL Consumer Care
1-800-237-7691

Monday - Friday 8 am — 10 pm ET
Saturday 9 am — 8 pm ET
Or write:
BISSELL Homecare, Inc.
PO Box 3606
Grand Rapids MI 49501
ATTN: Consumer Care

Or visit the BISSELL website - www.bissell.com
When contacting BISSELL, have model number of cleaner available.
Please record your Model Number: ___________________
Please record your Purchase Date: ___________________
NOTE: Please keep your original sales receipt. It
provides proof of purchase date in the event of a
warranty claim. See Warranty on page 23 for details.

w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Create Date                     : 2012:04:24 16:28:19-04:00
Creator                         : Adobe InDesign CS5 (7.0.4)
Modify Date                     : 2012:05:09 16:28:11-04:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2012:05:09 16:28:11-04:00
Creator Tool                    : Adobe InDesign CS5 (7.0.4)
Page Image Page Number          : 1, 2
Page Image Format               : JPEG, JPEG
Page Image Width                : 256, 256
Page Image Height               : 256, 256
Page Image                      : (Binary data 9555 bytes, use -b option to extract), (Binary data 6009 bytes, use -b option to extract)
Instance ID                     : uuid:9fc110e6-ec03-4b36-95f3-91c594ee5956
Document ID                     : xmp.did:4E6894B137206811B840976A5DDF371A
Original Document ID            : adobe:docid:indd:6464ea64-66f2-11dd-98e6-a003deb2534e
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:4D6894B137206811B840976A5DDF371A
Derived From Document ID        : xmp.did:4C6894B137206811B840976A5DDF371A
Derived From Original Document ID: adobe:docid:indd:6464ea64-66f2-11dd-98e6-a003deb2534e
Derived From Rendition Class    : default
History Action                  : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:018011740720681195FECDBC38F03B54, xmp.iid:028011740720681195FECDBC38F03B54, xmp.iid:038011740720681195FECDBC38F03B54, xmp.iid:048011740720681192B0BB90B7A8F3B3, xmp.iid:058011740720681192B0BB90B7A8F3B3, xmp.iid:FA7F11740720681197A59761769C8819, xmp.iid:FB7F11740720681197A59761769C8819, xmp.iid:FC7F11740720681197A59761769C8819, xmp.iid:F97F1174072068119734FEDC19B7A812, xmp.iid:FC7F117407206811B976EF9D982F65C6, xmp.iid:FD7F117407206811B976EF9D982F65C6, xmp.iid:FE7F117407206811B976EF9D982F65C6, xmp.iid:F77F117407206811AEC48B825452513A, xmp.iid:F87F117407206811AEC48B825452513A, xmp.iid:F97F117407206811AEC48B825452513A, xmp.iid:FA7F117407206811AEC48B825452513A, xmp.iid:FD7F117407206811AEC48B825452513A, xmp.iid:0180117407206811B9E7F079160F5478, xmp.iid:0380117407206811B9E7F079160F5478, xmp.iid:07801174072068119109A2BD2BC8D28C, xmp.iid:09801174072068119109A2BD2BC8D28C, xmp.iid:FC7F1174072068119400ACFC15B5E0DE, xmp.iid:FD7F1174072068119400ACFC15B5E0DE, xmp.iid:FE7F1174072068119400ACFC15B5E0DE, xmp.iid:0980117407206811803F9481024348F7, xmp.iid:0280117407206811AFFDAC7CDB0F17DA, xmp.iid:0380117407206811AFFDAC7CDB0F17DA, xmp.iid:0480117407206811AFFDAC7CDB0F17DA, xmp.iid:0580117407206811AFFDAC7CDB0F17DA, xmp.iid:F87F117407206811A961B13E18A62573, xmp.iid:F97F117407206811A961B13E18A62573, xmp.iid:0180117407206811AB08A7C00902D390, xmp.iid:0280117407206811AB08A7C00902D390, xmp.iid:FA7F11740720681197A598F7CF08C3BF, xmp.iid:FA7F1174072068119C9AF4D898F1FA7A, xmp.iid:FB7F1174072068119C9AF4D898F1FA7A, xmp.iid:FC7F1174072068119C9AF4D898F1FA7A, xmp.iid:45A711460A2068119457A7BCE99FCD29, xmp.iid:088011740720681192B08CC75059B033, xmp.iid:098011740720681192B08CC75059B033, xmp.iid:6F9F44A70E20681192B08CC75059B033, xmp.iid:739F44A70E20681192B08CC75059B033, xmp.iid:749F44A70E20681192B08CC75059B033, xmp.iid:2E4AE5062620681192B08CC75059B033, xmp.iid:0580117407206811AE56BC4DA6F60411, xmp.iid:0680117407206811AE56BC4DA6F60411, xmp.iid:0780117407206811AE56BC4DA6F60411, xmp.iid:0880117407206811AE56BC4DA6F60411, xmp.iid:0980117407206811AE56BC4DA6F60411, xmp.iid:0A80117407206811AE56BC4DA6F60411, xmp.iid:0C0D20461A206811AE56BC4DA6F60411, xmp.iid:0D0D20461A206811AE56BC4DA6F60411, xmp.iid:130D20461A206811AE56BC4DA6F60411, xmp.iid:140D20461A206811AE56BC4DA6F60411, xmp.iid:0680117407206811B42DAD87D3221113, xmp.iid:0880117407206811B42DAD87D3221113, xmp.iid:0280117407206811AB08A0DB6304D5BC, xmp.iid:0580117407206811A61383AB2BFD31D6, xmp.iid:078011740720681192B0D8644437BEB0, xmp.iid:4AA665891820681192B0D8644437BEB0, xmp.iid:00281A913E20681192B0D8644437BEB0, xmp.iid:FC7F1174072068118D4AF40A6CC1BA36, xmp.iid:FD7F1174072068118D4AF40A6CC1BA36, xmp.iid:FE7F1174072068118D4AF40A6CC1BA36, xmp.iid:F77F117407206811B4F2FEE48512625B, xmp.iid:F77F117407206811B840AF64E084CEEB, xmp.iid:F87F117407206811B840AF64E084CEEB, xmp.iid:F97F117407206811B840AF64E084CEEB, xmp.iid:FA7F117407206811B840AF64E084CEEB, xmp.iid:FB7F117407206811B840AF64E084CEEB, xmp.iid:0080117407206811B840AF64E084CEEB, xmp.iid:9691491D24206811B840AF64E084CEEB, xmp.iid:9791491D24206811B840AF64E084CEEB, xmp.iid:9891491D24206811B840AF64E084CEEB, xmp.iid:9991491D24206811B840AF64E084CEEB, xmp.iid:0180117407206811A9619FC32560E578, xmp.iid:0280117407206811A9619FC32560E578, xmp.iid:0380117407206811A9619FC32560E578, xmp.iid:0480117407206811A9619FC32560E578, xmp.iid:0180117407206811BB8EF189DA6A44B9, xmp.iid:0280117407206811BB8EF189DA6A44B9, xmp.iid:0780117407206811BB8EF189DA6A44B9, xmp.iid:0180117407206811ACAFAD92E4E7BDBE, xmp.iid:0180117407206811BD35EE85A2299629, xmp.iid:0280117407206811BD35EE85A2299629, xmp.iid:0380117407206811BD35EE85A2299629, xmp.iid:837B823F20206811BD35EE85A2299629, xmp.iid:847B823F20206811BD35EE85A2299629, xmp.iid:857B823F20206811BD35EE85A2299629, xmp.iid:028011740720681195FE82C65B189884, xmp.iid:038011740720681195FE82C65B189884, xmp.iid:048011740720681191099E32B5CB3E9B, xmp.iid:098011740720681191099E32B5CB3E9B, xmp.iid:0A8011740720681191099E32B5CB3E9B, xmp.iid:50FD38D23B20681191099E32B5CB3E9B, xmp.iid:51FD38D23B20681191099E32B5CB3E9B, xmp.iid:52FD38D23B20681191099E32B5CB3E9B, xmp.iid:0980117407206811AFFDFCB3A48E7711, xmp.iid:0180117407206811AE56EE192A22494D, xmp.iid:0280117407206811AE56EE192A22494D, xmp.iid:0380117407206811AE56EE192A22494D, xmp.iid:E88D10CC2C206811AB08B8EEE8CF6624, xmp.iid:F97F1174072068119D60C3B24FB95DEE, xmp.iid:F77F1174072068119734F0AF5155E2A7, xmp.iid:F77F117407206811B699D8DF48C05D86, xmp.iid:F87F117407206811B699D8DF48C05D86, xmp.iid:F97F117407206811B699D8DF48C05D86, xmp.iid:FD7F117407206811B699D8DF48C05D86, xmp.iid:FE7F117407206811B699D8DF48C05D86, xmp.iid:FF7F117407206811B699D8DF48C05D86, xmp.iid:F77F11740720681196FED37D0A177ADA, xmp.iid:E3B1AB652E206811B840976A5DDF371A, xmp.iid:E4B1AB652E206811B840976A5DDF371A, xmp.iid:4A6894B137206811B840976A5DDF371A, xmp.iid:4B6894B137206811B840976A5DDF371A, xmp.iid:4C6894B137206811B840976A5DDF371A, xmp.iid:4D6894B137206811B840976A5DDF371A, xmp.iid:4E6894B137206811B840976A5DDF371A, xmp.iid:75D14874072068118083D9E5BD879CE3, xmp.iid:76D14874072068118083D9E5BD879CE3, xmp.iid:19FD13C4072068118083D9E5BD879CE3, xmp.iid:98AA00DB072068118083D9E5BD879CE3, xmp.iid:AEBD15E5072068118083D9E5BD879CE3, xmp.iid:356D471B082068118083D9E5BD879CE3, xmp.iid:86002E30082068118083D9E5BD879CE3, xmp.iid:5C6E2A42082068118083D9E5BD879CE3, xmp.iid:B73EA272082068118083D9E5BD879CE3, xmp.iid:08635F96082068118083D9E5BD879CE3, xmp.iid:5124DCD8082068118083D9E5BD879CE3, xmp.iid:8E59B9DF082068118083D9E5BD879CE3, xmp.iid:B526B914092068118083D9E5BD879CE3, xmp.iid:C27B6F4D092068118083D9E5BD879CE3, xmp.iid:ED4C9081092068118083D9E5BD879CE3, xmp.iid:4A4779AE092068118083D9E5BD879CE3, xmp.iid:8DA542C0092068118083D9E5BD879CE3, xmp.iid:B8BCE8EA092068118083D9E5BD879CE3, xmp.iid:1457EB590B2068118083D9E5BD879CE3, xmp.iid:1557EB590B2068118083D9E5BD879CE3, xmp.iid:9ED2A2AD0B2068118083D9E5BD879CE3, xmp.iid:EB46D1900C2068118083D9E5BD879CE3, xmp.iid:EC46D1900C2068118083D9E5BD879CE3, xmp.iid:ED46D1900C2068118083D9E5BD879CE3, xmp.iid:64AFF7CC0C2068118083D9E5BD879CE3, xmp.iid:231D14FD0C2068118083D9E5BD879CE3, xmp.iid:A77580330D2068118083D9E5BD879CE3, xmp.iid:331EA3600D2068118083D9E5BD879CE3, xmp.iid:B77184720D2068118083D9E5BD879CE3, xmp.iid:7E50AD1C102068118083D9E5BD879CE3, xmp.iid:86878622102068118083D9E5BD879CE3, xmp.iid:B895A530102068118083D9E5BD879CE3, xmp.iid:902AD764242068118083E63ECFCEA49B, xmp.iid:A9406DC1082068118C14B82410999A1E, xmp.iid:0A97CF02082068118C14ADB79F50B70C, xmp.iid:4155E754082068118C14ADB79F50B70C, xmp.iid:75A4DCC3082068118C14ADB79F50B70C, xmp.iid:1067DDCB082068118C14ADB79F50B70C, xmp.iid:1167DDCB082068118C14ADB79F50B70C, xmp.iid:17D8D31D092068118C14ADB79F50B70C, xmp.iid:DBAC6940092068118C14ADB79F50B70C, xmp.iid:DC0815A00C2068118C14ADB79F50B70C, xmp.iid:285050040D2068118C14ADB79F50B70C, xmp.iid:4E38453F362068118083EDFDA226716D, xmp.iid:9C3C149C362068118083EDFDA226716D, xmp.iid:F5CF29BD362068118083EDFDA226716D, xmp.iid:B5F246E1362068118083EDFDA226716D, xmp.iid:682E1FE8362068118083EDFDA226716D
History When                    : 2009:06:09 08:31:01-04:00, 2009:06:09 08:31:01-04:00, 2009:06:09 08:38:47-04:00, 2009:06:19 14:40:26-04:00, 2009:06:19 14:54:31-04:00, 2009:06:24 11:08:08-04:00, 2009:06:24 11:09:38-04:00, 2009:06:24 11:09:39-04:00, 2009:06:25 11:14:57-04:00, 2009:06:25 12:29:24-04:00, 2009:06:25 12:29:24-04:00, 2009:06:25 12:29:41-04:00, 2009:07:01 11:16:56-04:00, 2009:07:01 11:17:23-04:00, 2009:07:01 11:32:54-04:00, 2009:07:01 11:32:54-04:00, 2009:07:01 14:13:29-04:00, 2010:02:11 11:53:43-05:00, 2010:02:11 15:03:15-05:00, 2010:02:23 11:08:20-05:00, 2010:02:23 15:24:03-05:00, 2010:03:02 16:16:58-05:00, 2010:03:02 16:23:48-05:00, 2010:03:02 16:48:14-05:00, 2010:03:03 15:31-05:00, 2010:03:09 10:14:19-05:00, 2010:03:09 10:28:03-05:00, 2010:03:09 13:33:32-05:00, 2010:03:09 13:33:37-05:00, 2010:03:10 10:59:07-05:00, 2010:03:10 13:33:41-05:00, 2010:03:16 09:55:33-04:00, 2010:03:16 09:55:33-04:00, 2010:03:17 14:50:59-04:00, 2010:03:18 12:22:14-04:00, 2010:03:18 12:25:04-04:00, 2010:03:18 13:05:27-04:00, 2010:03:19 11:09:19-04:00, 2010:03:22 09:11:16-04:00, 2010:03:22 09:11:16-04:00, 2010:03:22 10:56:29-04:00, 2010:03:22 11:38:39-04:00, 2010:03:22 11:39:40-04:00, 2010:03:22 12:17:03-04:00, 2010:03:23 09:31:13-04:00, 2010:03:23 10:50:30-04:00, 2010:03:23 10:56:57-04:00, 2010:03:23 10:56:57-04:00, 2010:03:23 10:57:48-04:00, 2010:03:23 11:04:48-04:00, 2010:03:23 11:04:48-04:00, 2010:03:23 11:54:56-04:00, 2010:03:23 16:17:40-04:00, 2010:03:23 16:33:54-04:00, 2010:03:24 09:13:50-04:00, 2010:03:24 15:32:38-04:00, 2010:04:09 15:12:56-04:00, 2010:04:13 16:31:16-04:00, 2010:04:14 10:57:18-04:00, 2010:04:14 11:57:06-04:00, 2010:04:14 15:50:47-04:00, 2010:04:27 16:01:20-04:00, 2010:04:27 16:07:05-04:00, 2010:04:27 16:38:57-04:00, 2010:04:28 09:44:29-04:00, 2010:05:07 11:37:34-04:00, 2010:05:07 11:39:05-04:00, 2010:05:07 11:43:40-04:00, 2010:05:07 11:45:41-04:00, 2010:05:07 11:45:41-04:00, 2010:05:07 15:00:33-04:00, 2010:05:07 15:02:44-04:00, 2010:05:07 15:16:16-04:00, 2010:05:07 15:18:14-04:00, 2010:05:07 15:18:14-04:00, 2010:05:19 10:50:15-04:00, 2010:05:19 10:50:17-04:00, 2010:05:19 11:23:14-04:00, 2010:05:19 16:48:47-04:00, 2010:05:21 13:34:35-04:00, 2010:05:21 13:42:33-04:00, 2010:05:21 15:35:49-04:00, 2010:05:27 11:52:32-04:00, 2010:06:02 10:38:21-04:00, 2010:06:02 10:44:26-04:00, 2010:06:02 10:52:06-04:00, 2010:06:02 14:04:52-04:00, 2010:06:02 14:32:52-04:00, 2010:06:02 14:32:53-04:00, 2010:06:08 09:06:34-04:00, 2010:06:08 09:43:33-04:00, 2010:06:16 10:28:24-04:00, 2010:06:16 15:02:05-04:00, 2010:06:16 15:02:34-04:00, 2010:06:16 15:02:34-04:00, 2010:06:16 15:08:27-04:00, 2010:06:16 15:08:28-04:00, 2010:08:02 16:54:34-04:00, 2010:08:03 10:36:29-04:00, 2010:08:03 10:36:51-04:00, 2010:08:03 10:36:51-04:00, 2010:08:04 15:12:59-04:00, 2010:08:16 17:08:07-04:00, 2010:08:17 10:14:38-04:00, 2010:08:19 08:47:14-04:00, 2010:08:19 09:21:54-04:00, 2010:08:19 09:21:54-04:00, 2010:08:19 09:57:30-04:00, 2010:08:19 09:57:31-04:00, 2010:08:19 10:00:06-04:00, 2010:09:09 11:02:15-04:00, 2010:09:10 15:11:12-04:00, 2010:09:10 15:14:23-04:00, 2010:09:10 15:14:26-04:00, 2010:09:10 16:12:41-04:00, 2010:09:10 16:12:42-04:00, 2010:09:10 16:16:13-04:00, 2010:09:10 16:16:14-04:00, 2012:03:27 14:30:28-04:00, 2012:03:27 14:30:28-04:00, 2012:03:27 14:32:42-04:00, 2012:03:27 14:33:21-04:00, 2012:03:27 14:33:38-04:00, 2012:03:27 14:35:09-04:00, 2012:03:27 14:35:44-04:00, 2012:03:27 14:36:14-04:00, 2012:03:27 14:37:35-04:00, 2012:03:27 14:38:35-04:00, 2012:03:27 14:40:27-04:00, 2012:03:27 14:40:38-04:00, 2012:03:27 14:42:07-04:00, 2012:03:27 14:43:42-04:00, 2012:03:27 14:45:10-04:00, 2012:03:27 14:46:25-04:00, 2012:03:27 14:46:55-04:00, 2012:03:27 14:48:06-04:00, 2012:03:27 14:58:22-04:00, 2012:03:27 14:59:32-04:00, 2012:03:27 15:00:43-04:00, 2012:03:27 15:07:04-04:00, 2012:03:27 15:07:21-04:00, 2012:03:27 15:08:10-04:00, 2012:03:27 15:08:45-04:00, 2012:03:27 15:10:05-04:00, 2012:03:27 15:11:37-04:00, 2012:03:27 15:12:52-04:00, 2012:03:27 15:13:22-04:00, 2012:03:27 15:32:27-04:00, 2012:03:27 15:32:36-04:00, 2012:03:27 15:33-04:00, 2012:03:28 11:40:50-04:00, 2012:04:06 08:35:16-04:00, 2012:04:13 09:26:59-04:00, 2012:04:13 09:29:16-04:00, 2012:04:13 09:32:22-04:00, 2012:04:13 09:32:36-04:00, 2012:04:13 09:34:21-04:00, 2012:04:13 09:34:53-04:00, 2012:04:13 09:35:51-04:00, 2012:04:13 10:00-04:00, 2012:04:13 10:02:48-04:00, 2012:04:24 16:23:27-04:00, 2012:04:24 16:26:03-04:00, 2012:04:24 16:26:58-04:00, 2012:04:24 16:27:59-04:00, 2012:04:24 16:28:10-04:00
History Software Agent          : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0
History Changed                 : /, /metadata, /, /, /, /, /metadata, /, /, /metadata, /;/metadata, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /metadata, /;/metadata, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /metadata, /;/metadata, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /, /, /, /, /metadata, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /metadata, /, /, /, /, /, /metadata, /;/metadata, /metadata, /, /, /, /metadata, /;/metadata, /, /, /, /, /metadata, /;/metadata, /metadata, /, /, /, /, /metadata, /, /metadata, /;/metadata, /metadata, /, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata
Doc Change Count                : 12909
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.9
Trapped                         : False
Page Count                      : 24

EXIF Metadata provided by EXIF.tools

Bissell Proheat2X 9500 P Users Manual

9500-p to the manual e0e57716-74ad-4c78-9876-883ab2b7b03c

Navigation menu

Versions of this User Manual:

Views

Navigation