Brivo Systems ACS6000-01 ACS6000 Access Control System User Manual

Brivo Systems, Inc. ACS6000 Access Control System Users Manual

a href="https://usermanual.wiki/Brivo-Systems" itemprop="url"> Brivo Systems >

Users Manual

 Brivo ACS6000 (A/E/F/S) Installation Manual  10/17/2016
Brivo ACS6000 Installation Manual Page 2       © 2016 Brivo Systems LLC.  All rights reserved. 10/17/2016  Legal Disclaimers Federal Communications Commission (FCC) Compliancy  You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation or when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Re-orient or relocate the receiving antenna. • Increase the distance between the equipment and receiver. • Connect the equipment into an outlet on a circuit other than the one to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.  This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference and 2. This device must accept any interference received, including interference that may cause undesired operation of the device.  FCC RF Radiation Exposure Statement 1. This transmitter must not be co-located or operate in conjunction with any other antenna or transmitter. 2. This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Canada-Underwriters Laboratories (C-UL) Compliancy (CSA C22.2 No. 205) For C-UL Listed applications, the unit shall be installed in accordance with Part 1 of the Canadian Electrical Code. UL294 Performance Levels Model Number Access Control Line Security Level Destructive Attack Level Endurance Level Stand-by Power Level Conditions Brivo ACS6000 and ACS6008 Level I Level I Level IV Level I N/A Documentation Disclaimer and Restrictions Information in this document is subject to change without notice and does not represent a commitment on the part of Brivo Systems LLC. For the most up-to-date information, visit www.brivo.com. This document and the data herein shall not be duplicated, used or disclosed to others for procurement or manufacturing, except as authorized with the written permission of Brivo Systems LLC. The information contained within this document or within the product itself is considered the exclusive property of Brivo Systems LLC. All information in this document or within the hardware and software
Download:
Mirror Download [FCC.gov]
Document ID3186766
Application IDJvms3gp1vlDZ+ENf333Ypw==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize122.76kB (1534486 bits)
Date Submitted2016-11-04 00:00:00
Date Available2017-05-04 00:00:00
Creation Date2016-10-20 13:35:31
Producing SoftwareMac OS X 10.11.4 Quartz PDFContext
Document Lastmod2016-10-21 00:37:01
Document TitleMicrosoft Word - ACS6000 A-E-F-S Installation Manual.docx
Document CreatorWord
FCC ID Filing: O9U-ACS6000-01

Navigation menu