Busch Jaeger Elektro FHIWD1US ABB-free at home in wall devices User Manual Manual ABB Ceiling Fan Controller

Download:
Mirror Download [FCC.gov]
Document ID	3946688
Application ID	UNCHXU0NHHIctpgzmOMWSQ==
Document Description	Manual - ABB Ceiling Fan Controller
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	48.96kB (611955 bits)
Date Submitted	2018-08-01 00:00:00
Date Available	2018-08-01 00:00:00
Creation Date	2018-03-19 17:05:29
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2018-03-19 17:05:40
Document Title	Manual - ABB Ceiling Fan Controller
Document Creator	Adobe InDesign CC 13.0 (Macintosh)

FC-3.1 / Date
FC-3.1
EN
FR
ES
...
QR-Link
Ceiling Fan Controller, ABB-free@home Installation and Operation Instructions
IMPORTANT: Carefully read all instructions and safety
information about this device before operation. Please leave
this document with the homeowner for future reference.
WARNING: Installation must be performed by a licensed
electrician or electrical professional. Improper installation can
cause property damage, personal injury, or loss of life.
WARNING: FIRE
Work performed incorrectly can cause fires. Use the device
only in a certified wall box. Recommended: Carlon® products,
which have a high safety standard. Do not connect equipment that
is not intended to be controlled by this device. Please refer to the
equipment manufacturer if it is unclear.
WARNING: DAMAGED DEVICE
A damaged device could result in serious injury or death. If
the device shows any damage to its body or wiring insulation,
immediately turn off the power at the circuit breaker or fuse. Replace
the device with an undamaged device. Do not try to repair the device.
Intended Use
Replacing the Rocker and Bezel: The rocker and bezel of the device
can be exchanged. Turn the power OFF before removing the adapter
bezel with a screwdriver. Turn the power ON after the rocker and bezel
have been assembled.
FC-3.1 Technical Data
Operating Voltage
120 VAC, 60 Hz
Connection
Hot and Neutral Wires Required
Wireless Transmission Protocol
free@home, 2.400 - 2.483 GHz,
Meshed
Ambient Operating Temperature
23° F to 113° F (-5°C to 45°C)
Fan power (output power)
200 W maximum*
*Recommended for a fan size of 70 in (1.80 m) or smaller
OPERATION
Increase Speed
The ABB Ceiling Fan Controller is used to control one ceiling fan. It has
a wireless control unit that connects it to the ABB-free@home system.
For information about the many functions of this device, see the system
manual at www.abb.com/us/freeathome.
INSTALLATION
English
WARNING: SHOCK HAZARD
1. Turn the power OFF at the circuit breaker before installing.
2. Remove the old wall plate from the wall. Remove the old switch/
ceiling fan controller from the wall box.
3. Disconnect all three wires from the old switch/ceiling fan controller.
4. Connect the Ceiling Fan Controller. (Refer to the wiring diagrams.)
A) Single-Location Installation
B) 3-Way Installation
Wiring Connection Diagrams
black
blue
Wiring Connection
Black
Hot/Live (120VAC)
White
Neutral
Blue
Binary Input
Red
Load Output
Green
Ground
green
red
white
5. Mount the Ceiling Fan Controller. Using a screwdriver and
the screws provided, mount the ABB Ceiling Fan Controller.
6. Replace the wall plate.
7. Turn the power ON at the circuit breaker.
Follow these steps to reset:
A) Turn the power OFF at the circuit breaker.
B) Turn the power ON at the circuit breaker while pressing the
bottom half of the rocker for at least 15 seconds, until the LED
light stops flashing.
C) Return to steps 3-4 of SETUP AND COMMUNICATION to
connect the device to a new network.
Codes
Install according to national and local electrical codes.
Grounding
When there is no ground connector in the wall box, the National
Electrical Code (NEC®) allows a control to be installed as a
replacement ONLY IF 1) a non-metal, non-burning faceplate is attached
with non-metal screws, OR 2) the circuit is protected by a ground fault
circuit interrupter (GFCI). When installing a control, be sure to cap or
remove the green wire before screwing the control into the wall box.
Cleaning:
To clean, wipe with a clean damp cloth. DO NOT use any chemical
cleaning solutions.
FCC/IC Information
Decrease Speed
Safety-Off Switch*
WARNING: *SAFETY-OFF SWITCH
May result in serious injury or death. The rocker on the
device may have been configured to operate another fan
other than the one switched off by the Safety Off. Before
replacing the fan, verify that the wires to the fan do not have power by
turning the fan ON. If the fan turns off when the Safety Off is activated,
it is safe to replace the fan.
This device complies with part 15 of the FCC Rules and Industry Canada license-exempt
RSS standard(s). Operation is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any interference, including
interference that may cause unwanted operation. Modifications not expressly approved by
the manufacturer could void the user’s authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used according to the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in an installation. If this
equipment does cause harmful interference to radio or television reception, which can be
tested by turning the equipment off and on, the user is encouraged to try to correct the
interference by doing one or more of the following:
• Reposition or move the receiving antenna.
• Increase the distance between the equipment and the receiver.
• Connect the equipment to an outlet on a different circuit (not the circuit used by the
receiver).
• Consult the dealer or an experienced radio/TV technician for help.
SETUP AND COMMUNICATION
After installation, the Ceiling Fan Controller will immediately allow the
lamp to function. To control the fan wirelessly, it will need to be added to
the free@home network. Detailed information about setup is available
in the technical reference manual and the online help for the System
Access Point at www.abb.com/us/freeathome.
Customer Service
1. To complete setup, you will need the ABB-free@home System
Access Point (SysAP) and a computer (tablet, laptop, or desktop
computer).
2. Walls, ceilings, and electrical equipment can affect wireless
communication, especially steel reinforcements or other large metal
objects. Electrical devices that send high-frequency signals (such
as computers, wireless routers, audio systems, and video systems)
should be at least 3-feet from this device.
3. When first powered, the device is in discovery mode for 30 minutes.
This time period allows the SysAP to see and connect to the device.
During this time, the user can login to the SysAP and add the device
to the free@home network.
4. After 30 minutes, the device will automatically exit discovery mode.
To re-enter discovery mode, the user must turn the power OFF and
back ON again. This will place the device in discovery mode for
another 30 minutes.
5. Once a device has been added to a network, it will no longer enter
discovery mode at power-up. To add the device to a new network,
the user must first force the device to forget its existing network
by resetting it back to factory settings. This takes two people to do
safely.
888-385-1221, Option 1
7:00 am - 5:00 pm, CST, Monday - Friday
lvps.support@us.abb.com
800-816-7809
7:00 am - 5:30 pm, CST, Monday - Friday
elec_custserv@tnb.com
Technical Support
For information about the many functions
of this device, see the system manual at
www.abb.com/us/freeathome
ABB Inc.
Electrification Products
8155 T&B Boulevard
Memphis, TN 38125
www.abb.com/us/freeathome
ABB-free@home is a trademark of ABB Inc. NEC is a registered trademark
of the National Fire Protection Association, Quincy, Massachusetts.
© 2018 ABB Inc.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c143 79.161210, 2017/08/11-10:28:36
Create Date                     : 2018:03:19 17:05:29-04:00
Metadata Date                   : 2018:03:19 17:05:40-04:00
Modify Date                     : 2018:03:19 17:05:40-04:00
Creator Tool                    : Adobe InDesign CC 13.0 (Macintosh)
Instance ID                     : uuid:4ffc555d-0b9e-e242-9ab0-d109bef6666d
Original Document ID            : xmp.did:4485a0e4-d413-4767-a0e8-4c099984b2c0
Document ID                     : xmp.id:48ee4cab-2f94-4b1f-a986-353eba1804b3
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:fae99079-0234-4ac1-9ef0-40afa35918d1
Derived From Document ID        : xmp.did:4db34aee-68ef-4368-872d-5bcb0166a67a
Derived From Original Document ID: xmp.did:4485a0e4-d413-4767-a0e8-4c099984b2c0
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 13.0 (Macintosh)
History Changed                 : /
History When                    : 2018:03:19 17:05:29-04:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 1
Creator                         : Adobe InDesign CC 13.0 (Macintosh)

EXIF Metadata provided by EXIF.tools