CCL ELECTRONICS 8340D1801 433 MHz Transmitter User Manual

CCL ELECTRONICS LTD 433 MHz Transmitter

a href="https://usermanual.wiki/CCL-ELECTRONICS" itemprop="url"> CCL ELECTRONICS >

User Manual

WIRELESS HYGRO-THERMO OUTDOOR SENSORModel: C8340USER MANUAL1. LED indicator- Flashes when the remote unit is transmitting.4. [ RESET ] key- Press to restart the sensor.2. LCD display to show the detected temperature or humidity of the sensor.5. [ CHANNEL ] slide switch- Assign the transmitter to Channel from 1 to 3.3. Wall mounting holder 6. Battery compartment - Accommodates 2 x AA size batteries.BEFORE USING THE OUTDOOR SENSOR 1. Remove the battery door.2. Insert 2 x AA size batteries into the battery compartment. Make sure you insert them the right way according to the polarity information marked on the battery compartment.3. Replace the battery door.The sensor will now start transmitting signals, and LED indicator ashes.NOTE: - Once the channel is assigned to a sensor, you can only change it by removing the batteries or resetting the sensor, you also need to press the [SENSOR] key on main unit to pair this sensor. - Avoid placing the transmitter in direct sunlight, rain or snow. - To avoid the wireless sensor and main unit pairing failure, please power up the sensor/s rst, and then press [ RESET ] key on the main unit (no need on sensors). - The building material and the position of the receiver and transmitter aect the eective range. So try various locations to obtain the best result. - Place the units away from metal objects and electrical appliances to minimize the interference. Position the receiver and transmitter within the eective transmission range: 30m in usual circumstances.TEMPERATURE AND HUMIDITY DISPLAYThe LCD of sensor will alternately display temperature and humidity in about every 4 seconds.BATTERY REPLACEMENTWhen the batteries in the sensor are low, the low battery icon will displayed on its LCD. Please replace with new batteries.IMPORTANT NOTE• Do not subject the unit to excessive force or shock.• Do not expose the unit to extreme temperatures, direct sunlight, dust or moist enviroment.• Do not immerse in water.• Avoid contact with any corrosive materials.• Do not dispose this unit in a re as it may explode.• Do not open the inner back case or tamper with any components of this unit.• Please dispose of used unit or batteries in an ecologically safe manner.
FCC STATEMENTSThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:1. This device may not cause harmful interference, and2. This device must accept any interference received, including interference that may cause undesired operation.Warning:Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.Note:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.SPECIFICATIONOperating temperature range: -20°C ~ 60°C -4°F ~ 140°F Temperature resolution: 0.1°C Display humidity range: 20% ~ 90% RHHumidity resolution: 1% RHRF transmission frequency: 433MHzRemote sensors channel: 3 channelsRF transmission range: maximum 30 metersPower: 1.5V, AA x 2 (alkaline battery recommended)Dimension: 65(W) x 100(H) x 35(D) mm
Download: CCL ELECTRONICS 8340D1801 433 MHz Transmitter User Manual
Mirror Download [FCC.gov]CCL ELECTRONICS 8340D1801 433 MHz Transmitter User Manual
Document ID3883674
Application IDDA1iXff0kMag53vRPz1nwg==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize13.4kB (167475 bits)
Date Submitted2018-06-11 00:00:00
Date Available2018-06-11 00:00:00
Creation Date2017-12-11 17:33:54
Producing SoftwareAdobe PDF Library 15.0
Document Lastmod2018-06-11 16:33:54
Document TitleUser Manual
Document CreatorAdobe InDesign CC 2015 (Windows)
FCC ID Filing: 2ALZ78340D1801

Navigation menu