Contents
- 1. User Manual
- 2. User Manual Software Security Procedures
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2532714 |
| Application ID | irebt7Ls6ve/RHtwynXm1g== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 76.35kB (954426 bits) |
| Date Submitted | 2015-02-12 00:00:00 |
| Date Available | 2015-08-11 00:00:00 |
| Creation Date | 2017-10-18 21:55:52 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-10-18 21:55:52 |
| Document Title | á„‘á…µá„á…© 프로&에어 매뉴얼 시안 |
| Document Creator | Adobe Illustrator CS6 (Windows) |
Table of Contents 1. Safety Precautions FCC Compliance Information FCC Class Notice FCC Caution FCC RF Radiation Exposure Statement Industry Canada Statement CE Caution IEC-60825-1 Caution 2. Certifications 3. Environmentally Friendly Disposal and Recycling 4. Package Contents 5. Product Features 6. Identifying Parts 7. Connecting PicoPro a. Compatible Operating Systems b. Wired Connection c. Wireless Connection d. Switching Connection Mode 8. Making Adjustments a. Volume Adjustment b. Speaker / Earphone Usage c. Laser Alignment 9. Charging the PicoPro 10. Troubleshooting 11. Specifications 12. Warranty 1. Safety Precautions This product is not waterproof – avoid using it near water or wet places. There is a risk of malfunction if product is used in places where sudden or extreme temperature changes occur. Applying excessive force or impact to this product may result in product damage, and will void warranty. Never attempt to disassemble or service this product yourself. Doing so can result in electrical shock and void warranty. This is a Class 3R Laser product. For your safety, do not stare directly into the laser source. Doing so could damage your eyes. FCC Compliance Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference to another device. 2. This device must accept any interference received, including interference that may cause undesired operation. FCC Class Notice This equipment has been tested and found to comply within the limits for a Class B digital device, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. This equipment generates, uses, and radiates radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur with special installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one of the following measures: ■ Reorient or relocate the receiving antenna. ■ Increase separation between the equipment and receiver. ■ Connect the equipment to an outlet on a circuit different from which the receiver is connected. ■ Consult the dealer or an experienced radio/TV technician. FCC Caution Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Industry Canada Statement This device complies with Industry Canada license- exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. CE Caution Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. IEC-60825-1 Caution Use of control or adjustments or performances of procedures other than those specified here in may result in hazardous radiation exposure. 2. Certifications CLASS 3R LASER PRODUCT compliant KC : MSIP-CMM-CLK-PICOPRO FCC ID : TCLPICOPRO CE1177 IC No : 10211A-PICOPRO RoHS IEC-60825-1 : Class 3R Laser 3. Environmentally Friendly Disposal and Recycling To protect the environment, dispose this product separately from household waste once it has reached its end of life, or take it to your local electronic waste disposal center. Built-in Battery Battery Type Rechargeable Lithium-ion Polymer Battery Battery Operating Time Approx. 150 minutes (with continuous use) Battery Capacity 3140 mAh @ 3.7V Charging the Battery Use supplied USB power adapter to begin charging the battery. Battery status is indicated by four blue LED indicators while charging. (4 LED : 100% / 3 LED : 75% / 2 LED : 50% / 1 LED : 25%) Battery Charging Time Approx. 270 minutes 4. Package Contents Samsung PicoPro User Manual Power HDMI/MHL microUSB Adapter cable Adapter Tripod Pouch 5. Product Features PicoPro is a laser-based pico projector that fits in your pocket for a superior portability. It allows you to project contents in your mobile devices onto any surface via HDMI connection or Miracast screen mirroring capability. 6. Identifying Parts Touch-sensitive Volume Down Reset Button Touch-sensitive Volume Up Backlit Battery Indicator Light Speaker FCC ID : TCLPICOPRO CE1177 KC : MSIP-CMM-CLK-PICOPRO IC : 10211A-PICOPRO Model : PicoPro DC : 5V 2A Celluon, Inc. Made in Korea Power Button 3.5mm Audio Out Battery Status Indicator Mode Switch Button CHARGE – Micro USB port for charging MHL/HDMI cable input 7. Connecting PicoPro a. Compatible Operating Systems For Wireless Connection For HDMI Connection Miracast DLNA Android OS 4.2 or later Windows OS 8.1 or later Any OS that supports Screen Mirroring functionality Any digital devices that support HDMI capability Any digital devices that support DLNA protocol * Using DLNA connection requires downloading DLNA streaming app from the App Store or Play Store. b. Wired Connection Using HDMI Connection : Use plug-n-play connection for any digital/mobile device via HDMI connection. 1. Turn on PicoPro by pressing the power button for about 2-3 seconds. 2. Celluon logo will display upon power on. 3. After the logo, “Preparing wireless connection… To go to HDMI mode, press Mode Switch button” screen will display. 4. Press and hold “Mode Switch” button located next to power button for 2~3 seconds to change to HDMI mode. 5. PicoPro is now in HDMI mode. 6. Locate MHL/HDMI port on the PicoPro and use supplied HDMI cable to connect to a device. 7. PicoPro will start mirroring contents from connected device. * For Apple devices, please use additional Apple digital AV adapter to connect via HDMI cable. * For Samsung devices, please use supplied Samsung adapter (5pin to 11pin converter) to connect to MHL/HDMI cable. c. Wireless Connection Using Miracast : The Miracast capability is called different names on difference devices. (Samsung/Sony – Screen Mirroring , HTC – Media Output) Please find this capability in the settings app on the device. 1. Turn on PicoPro by pressing power button for 2-3 seconds. 2. Celluon logo will display upon power on. 3. After the logo, “Preparing wireless connection… To go to HDMI mode, press Mode Switch button” screen will display. 4. After about 20-30 seconds, “Ready to Connect” screen for Miracast will display. 5. On a desired mobile device, find and select Screen Mirroring / Media Output. 6. Mobile device will search for nearby devices to connect. 7. When device discovers “Celluon PicoPro”, tab to connect. 8. Mobile device will say “Connected” and PicoPro will start mirroring display. Using DLNA : * To connect to devices using DLNA capability, you must install a DLNA streaming app on your mobile device. Apps can be downloaded from AppStore/GooglePlay 1. Turn on PicoPro by pressing power button for 2-3 seconds. 2. Celluon logo will display upon power on. 3. After the logo, “Preparing wireless connection… To go to HDMI mode, press Mode Switch button” screen will display. 4. After about 20-30 seconds, “Ready to Connect” screen for Miracast will display. (Default wireless connection mode is Miracast) 5. Lightly press “Mode Switch” button again to change to DLNA mode. 6. DLNA “Ready to Connect” screen will display upon completion of mode switch. 7. On a desired mobile device, go to WiFiseting, and connect to “Celluon PicoPro”. Use password “12345670” to connect. 8. When Wifi is successfully connected, open the installed DLNA streaming application on the mobile device. 9. Select desired content to display. 10. Select display location: Celluon PicoPro. 11. Mobile device will say “Connected” and PicoPro will start display selected media contents. *** For DLNA connection with iOS devices: 1. Follow above steps 1-7. 2. Find AirPlay option on device’s status bar. 3. Tab AirPlay and select “Celluon AirPico” for display location. 4. Select a photo/video/music to share through PicoPro. d. Switching Connection Mode PicoPro allows you to easily switch from wired connection mode to wireless mode, and vice versa From HDMI mode to Miracast mode 1. From HDMI mode, pressand hold “Mode Switch” button for about 2 seconds. 2. Celluon logo will display. 3. After the logo, “Preparing wireless connection… To go to HDMI mode, press Mode Switch button” screen will display. 4. After about 20-30 seconds, “Ready to Connect” screen will display for Miracast connection, indicating that the mode is successfully switched. From Miracast mode to HDMI mode 1. From Miracast mode, pressand hold “Mode Switch” button for about 2 seconds. 2. Celluon logo will display shortly, and “Please connect using HDMI cable or press Mode Switch button to change to wireless mode” screen will display. 3. Use HDMI cable to connect device. From Miracast mode to DLNA / DLNA mode to Miracast 1. From Miracast mode, lightly press “Mode Switch” button. 2. “Ready to Connect” screen for DLNA mode will display. ** Booting up time make take up to 3 seconds. 8. Making Adjustments Volume Adjustment Volume is controlled directly from PicoPro. Locate touch volume control area on top of device. Adjust the volume by lightly touching on the + or – pattern. Speaker / Earphone Usage Please connect a speaker or an earphone to the 3.5mm audio out jack. Laser Alignment When the images seem blurry and/or the colors appear skewed, please visit Celluon website at www.celluon.com/support.php 9. Charging the PicoPro Operating Time Charging Time Wired Connection (HDMI/MHL) Wireless Connection (Miracast / DLNA) 3+ hrs 2.5+ hrs 4-5 hours Battery Status LED Indicator Status Description 0% charged Volume control + & - sensors will blink to indicate low battery status 25% charged First LED indicator remains solid. When charging at this stage, the second LED indicator will blink to indicate it is being charged. 50% charged First two LED indicators remain solid. When charging at this stage, the third LED indicator will blink to indicate it is being charged. 75% charged First three LED indicators remain solid. When charging at this stage, the fourth LED indicator will blink to indicate it is being charged. 100% charged All four LED indicators will remain solid. 1. Locate micro USB port next to the battery status button. 2. Use the supplied AC adapter to charge the PicoAir thought the micro USB port. ■ ■ ■ Please fully charge PicoPro’s internal battery before first use (approximately 3 to 5 hours). A low battery warning icon will show on the screen when the battery is low. Use the included power adapter to charge your PicoPro. If the battery is too low, PicoPro will automatically shut off. 10. Troubleshooting No signal when a device is connected via HDMI cable Please make sure the cables are inserted into the correct port. Please note that different devices require different gender/adapter to convert to micro HDMI compatible. Mobile device cannot find Celluon PicoPro during Miracast connection search Please make sure PicoPro is on Miracast mode. This may also be due to a particularly heavy wireless traffic. If this is the case, please reset the device by pressing the reset button on the back of device. Cannot stream contents through DLNA application Please make sure device’s WiFi is properly connected to PicoPro’s WiFi. For DLNA connection, please make sure to connect using the password “12345670” It takes a long time to display contents through DLNA mode It depends on each DLNA streaming app to project contents through PicoPro. For large media files, it may take some time to load and convert the video to correct format. PicoPro is connected, but only the black screen is projected from the device Please check if the connected mobile device is on sleep mode. If the screen of the connected device goes black, the projected screen will go black as well. Note that if the volume control LED patterns are on, the PicoPro is powered on. There is no sound Please make sure the volume level of the PicoPro and/or connected device is not in the mute status. The video stops playing periodically Please make sure connected device has enough battery to play the video. If both devices have enough battery, this may be due to unstable WiFi connection. Please disconnect and reconnect the device. Device automatically shuts down during use This may be due to the depletion of battery or high temperature of the product. If the product is left in a place where the enviornmental temperature is high (such as in a blanket or near heater), the power will turn off automatically in protection of fire hazard. Please cool the product and use it within specified operating temperature before turning it on again. If the product has been shut down due to the depletion of battery, please charge the device before turning it back on. PicoPro is frozen; it stopped playing the video / no response from buttons when pressed / cannot convert modes Please reset the device by pressing the reset button on the back of device. (Refer to “Identifying Parts” section for the location of reset button.) Product makes abnormal noises Please contact Celluon Customer Service for further assistance The projected image is unclear This is due to the shifts in laser diode. Please refer to Laser Alignment instruction page to adjust shifted lasers. Connection through Miracast intermittently disconnects during use This is due to the noise occurred by double wireless connection. Try to connect again after disconnecting all the previously connected wireless networks. 11. Specifications Item Spec. Remark Laser Display Performance Product Lifetime 10,000 hours Brightness 30 ANSI lumens Focus Infinite Focus (always in focus) No focus wheel required Max. Image (Screen) Size 250 inches In optimal lighting conditions Sequential Contrast Ratio 80,000 : 1 Resolution 1920 x 720p Aspect ratio 16:9 Throw Ratio 1.1 Color Depth 1.67M colors (R/G/B 24bit) Size 150 x 73 x 13.4 mm (6 x 3 x 0.5 inches) Measurement Electrical Characteristics Weight 181g ( 0.4lbs ) Battery Operation Time Wireless Connection: 2+ hrs Wired Connection: up to 3 hrs Speaker 1.0 W Audio Interface 3.5mm ear phone jack Wireless Dual (2.4G, 5G) Laser Safety Classification IEC Class 2, Edition 3 Environmental Condition Operating Temperature 0°C - 35°C The perceived brightness of laser projectors with a given ANSI brightness is 50%+ higher than that of the LED based projectors HD resolution Big screen at a short distance The operating time may vary depending on the environment of use Consumer safe device Wired Connection Compatibility Android/Windows OS Micro HDMI/MHL cable iOS Micro HDMI Additional Apple Lightning Digital AV Adapter required Wireless Connection Android/Windows OS Miracast Screen Mirroring iOS DLNA Download of DLNA streaming application required for DLNA connection 12. Warranty ■ Celluon warrants this product to be free from defects in materials and workmanship under normal use for a period of one (1) year from the date of purchase, as evidenced by the receipt of purchase. ■ During the warranty period, Celluon shall repair or replace the product if defective. If replaced, the replacement shall be with a product of equal or greater value. ■ This warranty is limited to the purchaser and is not transferable. Please contact support@celluon.com for warranty supports.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Create Date : 2014:12:24 00:38:10+09:00 Creator : Adobe Illustrator CS6 (Windows) Modify Date : 2015:02:05 17:26:00+09:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Title : 피코 프로&에어 매뉴얼 시안 Metadata Date : 2015:02:05 17:26+09:00 Creator Tool : Adobe Illustrator CS6 (Windows) Thumbnail Width : 40 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 4857 bytes, use -b option to extract) Instance ID : uuid:cfce34db-ac98-47fd-a3f5-dc788b4a9cc3 Document ID : xmp.did:004DC144978AE411ABC3928B01A67943 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:FF4CC144978AE411ABC3928B01A67943 Derived From Document ID : xmp.did:FF4CC144978AE411ABC3928B01A67943 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:0180117407206811822AB88524F4D52D, xmp.iid:004DC144978AE411ABC3928B01A67943 History When : 2014:12:04 17:24:21+09:00, 2014:12:24 00:38:10+09:00 History Software Agent : Adobe Illustrator CS6 (Macintosh), Adobe Illustrator CS6 (Windows) History Changed : /, / Manifest Link Form : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference Manifest Reference File Path : pro-black-bottom-s copy.png, pro-black-top-s.png, pro-black-top-s.png, pro-black-top-s.png, pro-black-top-s.png, pro-black-top-s.png, pro-black-side-s.png, pro-black-pers-s.png Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : True N Pages : 1 Max Page Size W : 180.001416 Max Page Size H : 1189.471238 Max Page Size Unit : Millimeters Font Name : NotoSans, NotoSans-Bold Font Family : Noto Sans, Noto Sans Font Face : Regular, Bold Font Type : TrueType, TrueType Font Version : Version 1.04, Version 1.04 Font Composite : False, False Font File Name : NotoSans-Regular_0.ttf, NotoSans-Bold_0.ttf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Group Name : Brights Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000004 Swatch Groups Colorants Magenta : 90.000000 Swatch Groups Colorants Yellow : 0.003099 Swatch Groups Colorants Black : 0.003099 Producer : Adobe PDF library 10.01 Page Count : 1EXIF Metadata provided by EXIF.tools