CHINA DRAGON TECHNOLOGY CDW-9776010-00 WiFi Module User Manual
CHINA DRAGON TECHNOLOGY LIMITED WiFi Module
Contents
- 1. user manual
- 2. host user manual
user manual
CHINA DRAGON TECHNOLOGY LIMITED WiFi Module CDW-9776010-00 WiFi Module CDW-9776010-00 OEM/Integrators Installation Manual Software: Customer Design Approve Check Approve Date Version Date V1.2 2018.11.15 CHINA DRAGON TECHNOLOGY LIMITED B4 Bidg. haosan No.1 lndustry Park, Shajing street, B, Shenzhen, China Phone:(86 755) 81449957 Fax:(86 755) 81449967 E-mail: Info@cdtech.cn Http://www.cdtech.cn CHINA DRAGON TECHNOLOGY LIMITED WiFi Module CDW-9776010-00 Reversion History: Version Date Modification V1.2 2018.11.15 New 1 / 13 CHINA DRAGON TECHNOLOGY LIMITED WiFi Module CDW-9776010-00 1. Overview The CDW-9776010-00 is a highly integrated WI-FI single chip which supports 150Mbps PHY rate. It fully complies with IEEE 802.11n and IEEE 802.11b/g standards, offering feature-rich wireless connectivity at high standards, and delivering reliable, cost-effective thoughput from an exended distance. Optimzed RF architecture and baseband algorithms provide superb performance and low power consumption.Intelligent MAC design deploys a high efficient DMA engine and hardware data processing accelerators which offloads the host processor. The CDW-9776010-00 is designed to support standard based features in the areas of security, quality of service and international regulations, giving end users the greatest performance any time and in any circumstance. 2. Features ■ IEEE 802.11b/g/n ■ Embedded high-performance 32-bit RISC microprocessor ■ Highly integrated RF with 55nm CMOS technology ■ 1T1R mode with support ■ Integrate high efficiency switching regulator ■ Best –in-class power consumption performance ■ MT7601 chip compact 5mm x 5mm QFN40L package ■ 1/2/3/4-wire PTA Wi-Fi/Bluetooth coexistence support ■ 802.11d/h/k compliant ■ Security support for WGA WPA/WPA2 personal,WPS2.0,WAPI ■ Supports 802.11w proteced managed frames ■ QoS support of WFA WMM,WMM PS ■ Supports Wi-Fi Direct ■ Fully compliance with USB v2.0 High-speed mode of 150Mbps PHY rate 2 / 13 CHINA DRAGON TECHNOLOGY LIMITED WiFi Module CDW-9776010-00 3. EEPROM Information Worldwide Configured by driver Reg Domain Offset 0x39 for 2.4G:0xFF Vendor ID 0X148F Product ID 0X7601 4. General Specification Model Name CDW-9776010-00 wlan standard IEEE 802.11 b/g/n Host interface USB2.0 Main Chipset MTK7601U PCBA Dimension 18×16×2.8mm(L×W×H) Operating conditions Voltage Min Typ Max 2.97 V 3.3 V 3.63 V Operating Temperature -20~ +60°C ambient temperature Storage Temperature -40 ~ 80°C ambient temperature Operating Humidity 5 to 90% maximum(non-condensing) Electrical Specification Frequency Range 2.4~2.4835 GHz ISM Band Date rates 1,2,5.5,6,11,12,18,22,24,30,36,48,54,60,90,120 and maximum of 150Mbps OS support Windows2000,XP32-64,Vista32/64,Win732/64, Linux, Mac, Android,WIN CE Spread Spectrum IEEE 802.11b: DSSS (Direct Sequence Spread Spectrum) IEEE 802.11g/n:OFDM (Orthogonal Frequency Division Multiplexing) Modulation BPSK/ QPSK/ 16-QAM/ 64-QAM Security WEP, TKIP, AES, WPA, WPA2 Output power Typical Power tolerance +/-2dB; EVM Mode Data Rate Power Unit 11b 1,2,5.5,11Mbps 17±2 dBm 6,9,12,24,36,48Mbps 16±2 dBm 54Mbps 15±2 dBm mcs0 17±2 dBm 11g 11n 3 / 13 WiFi Module CDW-9776010-00 CHINA DRAGON TECHNOLOGY LIMITED HT20&HT40 mcs6 15±2 dBm mcs7 14±2 dBm 11b 11Mbps -20 dB 11g 54Mbps -25 dB 11n HT20 mcs7 -28 dB 11n HT40 mcs7 -28 dB Mode Data Rate sensitivity Unit 11b 11Mbps -85 dBm 11g 54Mbps -72 dBm 11n HT20 mcs7 -69 dBm 11n HT40 mcs7 -65 dBm Description TYPE Unit Sleep mode 1.1 mA RX Active,HT40,MCS7 151 mA RX Power saving, DTIM=1 15 mA RX Listen mA TX HT40,mcs7 @15dBm 210 mA TX CCK,11Mbps @19dBm 242 mA RX sensitivity 5. DC Characteristics Power Consumption Note: All result is measured at the antenna port and VDD33 is 3.3V DC Characteristics(Units:V) Symbol Parameter Min Typ Max V IL Input Low Voltage -0.28 0.6 V IH Input High Voltage 2.0 3.63 V OL Output Low Voltage -0.28 0.4 V OH Output High Voltage 2.4 3.63 6. Reset Timing SPEC 4 / 13 CHINA DRAGON TECHNOLOGY LIMITED WiFi Module CDW-9776010-00 7. Pin Description NO Name Description RST_N GPIO WOL NC VCC Power supply 3.3V is required UDM USB negative differential data lines UDP USB positive differential data lines GND Ground connections GND Ground connections GND Ground connections 10 NC 11 GND GPIO Wi-Fi RST Wake on WLAN Host Interrupt(active low) Ground connections 5 / 13 CHINA DRAGON TECHNOLOGY LIMITED WiFi Module CDW-9776010-00 8. Modular PCB Decal size(unit:mm) 16.00 2.80 2.00 2.00 2.00 2.00 11 1.20 0.80 1.00 18.00 2.00 2.00 TOP VIEW BOTTOM VIEW 2.00 2.00 1.90 1.00 2.00 2.00 PCB LAYOUT Size Tolerance(mm) 0-10 ±0.1 10-100 ±0.2 Half-borehole ±0.075 6 / 13 CHINA DRAGON TECHNOLOGY LIMITED WiFi Module CDW-9776010-00 9. Modular photo Name Specification Manufacturer Crystal 40Mhz JWT,FK PCBA VER 132.977601U-01 A, O Crystal physical photo JWT 40MHz 3225 FK 40MHz 3225 PCBA physical photo PCBA EVENNESS PCBA PCBA Place it face up on a marble platform, or on a glass panel greater than 5mm thick, using a plug Gauge to measure the maximum corner size required≤0.1mm 7 / 13 CHINA DRAGON TECHNOLOGY LIMITED WiFi Module CDW-9776010-00 10. IPEX Connector spec 8 / 13 CHINA DRAGON TECHNOLOGY LIMITED WiFi Module CDW-9776010-00 11. Shielding cover spec 9 / 13 CHINA DRAGON TECHNOLOGY LIMITED WiFi Module CDW-9776010-00 ESD CAUTION The CDW-9776010-00 is ESD (electrostatic discharge) sensitive device and may be damaged with ESD or spike voltage. Although CDW-9776010-00 is with built-in ESD protection circuitry, please handle with care to avoid the permanent malfunction or the performance degradation. 10 / 13 CHINA DRAGON TECHNOLOGY LIMITED WiFi Module CDW-9776010-00 Appendix 1: BOM IC SMT IC MT7601 QFN40 MTK U4 CRYSTAL SMT CRYSTAL 40MHz +/-10PPM 15PF 3.2x2.5 U5 inductance SMT COIL 0201 18nH +/-5% Sunlord MSDCL0603C18NJTDF L3、L4 inductance SMT COIL 0201 1.0nH +/-0.3nH Sunlord SDCL0603C1N0STDF L12 inductance SMT COIL 0201 2.7nH +/-0.3nH Sunlord SDCL0603C2N7STDF L9 L11 inductance SMT COIL 2016 4.7uH +/-20% 800mA, LVS201610-4R7M-N L20 resistance SMT RES 0201 100K OHM 1/20W +/-5% R14 resistance SMT RES 0201 2K OHM 1/20W +/-1% R17 R18 resistance SMT RES 0201 24K OHM 1/20W +/-1% R107 resistance SMT RES 0201 3.4K OHM 1/20W +/-1% R16 resistance SMT RES 0201 8.2K OHM 1/20W +/-1% R15 resistance SMT RES 0201 97.6 OHM 1/20W +/-1% R19 capacitance *SMT CAP 0201 0.5pF/50V +/-0.1PF C0G EYANG C0201C0G0R5B500NTA C215 capacitance *SMT CAP 0201 1.0pF/50V +/-0.1PF C0G EYANG C0201C0G1R0B500NTA C237 C238 capacitance *SMT CAP 0201 1.2pF/50V +/-0.1PF C0G EYANG C0201C0G1R2B500NTA capacitance *SMT CAP 0201 5.6pF/50V +/-0.25PF C0G EYANG C0201C0G5R6C500NTA C96 C105 C1 C4、C5 C48 C49 C56 C57 capacitance *SMT CAP 0201 0.1uF/6.3V +/-10% X5R EYANG C0201X5R104K6R3NTA C58 C93 C97 C98 capacitance C82 C99 *SMT CAP 0201 1uF/6.3V +/-20% X5R EYANG C0201X5R105M6R3NTA capacitance capacitance *SMT CAP 0603 10uF/6.3V +/-20% X5R Samsung CL10A106MQ8NNNC *SMT CAP 0201 22pF/50V +/-5% C0G EYANG C0201C0G220J500NTA C103 C100 C104 C59 C95 C102 L1 capacitance *SMT CAP 0201 3.3nF/16V +/-10% X7R EYANG C0201X7R332K160NTA C52 capacitance *SMT CAP 0201 3.9nF/16V +/-10% X7R EYANG C0201X7R332K160NTA C50 capacitance *SMT CAP 0201 47pF/50V +/-5% C0G EYANG C0201C0G470J500NTA C12 capacitance *SMT CAP 0402 4.7uF/6.3V +/-20% X5R Samsung CL05A475MQ5NRNC C84 C85 capacitance *SMT CAP 0201 68pF/50V +/-5% C0G EYANG C0201C0G680J500NTA C38 PCB PCB FR-4 size:91.56*86.003*0.8mm 20 20181106 Shield 13*12*2mm T=0.2mm IPX 369.0000017-00 IPX SMD 3*3.1*1.25mm(20279-001E-01)CDT-AMB-00 CON2 11 / 13 CHINA DRAGON TECHNOLOGY LIMITED WiFi Module CDW-9776010-00 Module User Manual The purpose of this manual is to explain correct way how to integrate module CDW-9776010-00 to the end product. It includes procedures that shall assist you to avoid unforeseen problems. This manual presents information that shows how module and OEM product, where module integrated, complies with regulations in certain regions. Note that any modifications, not expressly approved by the manufacturer could void the authority to operate in these regions. Integration The RF module, model CDW-9776010-00 has to be installed and used in accordance with the technical installation instructions provided by the manufacturer. For detail information concerning type approval of this module please contact the authorized local distributor or the manufacturer. The system may only be implemented in the configuration that was authorized. USA-Federal Communications Commission (FCC) This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Labeling The RF module CDW-9776010-00 for controller labeled as below. The label that is placed on the module is too small to hold the required FCC information, then that information appear in the user manual for this device. In addition, the” Contains FCC ID : ROWCDW-9776010-00” label also must be placed on the outside of the end product system. 12 / 13 CHINA DRAGON TECHNOLOGY LIMITED WiFi Module CDW-9776010-00 The module is limited to OEM installation only. That OEM integrators is responsible for ensuring that the end-user has no manual instructions to remove or install the module. The module is use for three antenna to choose and is use for buckle below Ant. Brand N/A N/A N/A Model Name RFFPA401520I MLB301 RFFPA281353I MLB301 RFMTA340758I MAB701 Antenna Type Gain (dBi) External antenna 3.32 External antenna 2.91 External antenna 3.52 NOTE ANT3 ANT2 ANT1 This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instruction to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. 13 / 13
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : USER Create Date : 2019:03:13 15:30:00+08:00 Modify Date : 2019:03:13 15:30:00+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Producer : Acrobat Distiller 9.0.0 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Format : application/pdf Title : Microsoft Word - CDW-9776010-00?specification_20181115 Creator : USER Document ID : uuid:117299b8-cbd0-4d4c-bf22-e2901afaefe2 Instance ID : uuid:f61af85d-0df3-4b52-9144-347a5bc49a34 Page Count : 14EXIF Metadata provided by EXIF.tools