CHINA ELECTRONICS BT-2004 Bluetooth Speaker User Manual BT 2004 manual
China Electronics Shenzhen Company Bluetooth Speaker BT 2004 manual
Contents
- 1. Manual
- 2. Addendum
Manual
2.
4.
9.
5.
7.
8.
10.
6.
1.
3.
BT-2004
生产单号： 型号：
料号：
其它要求：
物料名称： 说明书
134-BT2004-MA01
材质125g铜板纸 正反面印刷
尺寸：80*120mm
140617-001/002
41
11
2 3 5 6
7 8 9 10
OFF ON AUX Output
DC5V 500mA
2.0
®
Input: 5v 500mA
Made in China
Designed in USA
www.malektronic.com
FCC ID:
TM
xxxxx
S/N:MAF000200001
11.
2.0
Thank you for purchasing a Malektronic product.
Please read this user manual carefully before using the
speaker.
Please keep the speaker away from water and moisture to
avoid electric shock and damage to the unit.
Please keep the speaker away from any heat source.
The device contains a lithium ion battery.
Please adjust to a suitable volume. Turning the music too loud
can lead to some distortion and that is normal since not all
sound is recorded at the same level.
Do not attempt to open or disassemble the device for any
reason. There are no replaceable parts.
While the normal bluetooth transmission range is about 10
meters, this can be greatly affected by other signals in the area
as well as any obstructions including walls, metal or even the
thickness of the unit outer shell.
FUNCTIONS
USING THE PRODUCT
Connecting via bluetooth
Turn on power switch; speaker will have a “beeping” sound and the blue/orange
indicator light will start flashing alternately to indicate the speaker is searching for
bluetooth connection.
Turn on the bluetooth setting of your device to scan for the speaker (different
mobile devices will have different methods to turn on bluetooth setting). The
display name is “Malibu 2.0” and use the password “0000” (4 zeros) if prompted,
then select to confirm the connection. Once connection is established, there will
be an indication sound and the blue light will stay on in standby mode.
Connecting via NFC: Near Field Communication, a quick bluetooth
pairing technology is paired through a non-contact sensor. NFC can help make
pairing of your bluetooth mobile phone easier.
Switch on the NFC function on the mobile phone, and then put the back of the
phone near the NFC icon of the speaker to scan. For the first connection, you will
see a prompt to accept the device.
You can also quickly disconnect in the same manner, by placing the back of the
phone near the NFC icon.
Note: your phone must support NFC for this function.
TROUBLESHOOTING
Please refer to the below for some basic troubleshooting tips. Iif you have more
questions, please contact our customer support via our website:
www.malektronic.com or support@malektronic.com
Cannot connect to device
Please check speaker bluetooth is in connection searching mode and bluetooth
has been turned on for your device. Check if there are other peripheral bluetooth
playing devices connected with your device, unpair the other device and connect
No sound
check the volume level of your bluetooth device. If there is no sound or sound is
with the speaker again.
Please check whether speaker volume switch is turned to minimum level, also
not continuous, check the bluetooth range and remember it should be within 33
feet. Also check if there is any physical barrier between the speaker and the
device which might interfere with the signal.
Speaker cannot be turned on
Please ensure battery is charged. Also please ensure the Micro USB power
supply is DC5V/500mA~1A.
PRODUCT SPECIFICATIONS
Main device parameters
Rated Power 3Wx2
Peak Power 5Wx2
Speaker Unit 1.5”x2 + 1 passive radiator
Impedance 4 Ohm
Frequency Response 70Hz - 16KHz
Battery size 2500 mAh
Electronic Performance Parameters
Power Sources Consumption DC5V/500mA~1A
Speaker part / maximum power consumption <6W
Whole device / maximum power consumption <12W
S/N 80dB
Output Power 2x3 W RMS
Bluetooth
Output Power Max 4 dBm (Class 2)
Band 2.4000GHz - 2.480GHz
Range 10 meters (Open Space) / 33 feet
Standard 2.1+EDR specification
Package contents: Malibu 2.0 Speaker, micro USB cable, AUX-in
cable, user manual, carring case and AC charger.
Bluetooth light Indicator: Bluetooth connected = blue light on.
Bluetooth not connected = red light on.
Volume down / Last Song: Press quickly for last song, press and hold to
decrease the volume.
Pause and Play button : When playing music, press the button to pause
or play. Press and hold to unpair the current device.
Volume up / Next Song : Press quickly for next song, press and hold to
increase the volume, when volume reaches the maximum limit, speaker
will beep.
Phone Answer and Redial Key: Under Bluetooth connected status, when
the call comes in press button quickly to answer the call, press and hold
to change mode between AUX/Bluetooth.
Microphone: It is recommended to use within a distance of less than
50cm / 20 in.
Power On/Off
Micro USB: Use a computer USB port / power adapter to recharge the
speaker. When battery is low, it will take 4 hours to fully recharge the
battery.
Audio input (Line-in)
USB External device Charging interface: Plug your USB device into this
port to charge your device.
NFC SENSOR / Contact point
TM
FCC
FCC NOTICE This decive complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions;
1.This device may not cause harmful interferece,and
2.This device must accpept any interence received,including interfernce
that may cause undesiredoperation.
FCC CAUTION
■ Auy changes or modifications not expressly approved by the party responsible
for compliance couldvoid the user’s authority to operate this equipment.
■ This device and its antenna(s) must not be co-located or operating in
conjunction with any otherantenna or transmitter.